pounder_test/src/dac.rs

///! Stabilizer DAC management interface
///!
///! The Stabilizer DAC utilize a DMA channel to generate output updates.  A timer channel is
///! configured to generate a DMA write into the SPI TXFIFO, which initiates a SPI transfer and
///! results in DAC update for both channels.
use super::{
    hal, timers, DMAReq, DmaConfig, MemoryToPeripheral, TargetAddress,
    Transfer, SAMPLE_BUFFER_SIZE,
};

// The following global buffers are used for the DAC code DMA transfers. Two buffers are used for
// each transfer in a ping-pong buffer configuration (one is being prepared while the other is being
// processed). Note that the contents of AXI SRAM is uninitialized, so the buffer contents on
// startup are undefined. The dimensions are `ADC_BUF[adc_index][ping_pong_index][sample_index]`.
#[link_section = ".axisram.buffers"]
static mut DAC_BUF: [[[u16; SAMPLE_BUFFER_SIZE]; 2]; 2] =
    [[[0; SAMPLE_BUFFER_SIZE]; 2]; 2];

macro_rules! dac_output {
    ($name:ident, $index:literal, $data_stream:ident,
     $spi:ident, $trigger_channel:ident, $dma_req:ident) => {
        /// $spi is used as a type for indicating a DMA transfer into the SPI TX FIFO
        struct $spi {
            spi: hal::spi::Spi<hal::stm32::$spi, hal::spi::Disabled, u16>,
            _channel: timers::tim2::$trigger_channel,
        }

        impl $spi {
            pub fn new(
                _channel: timers::tim2::$trigger_channel,
                spi: hal::spi::Spi<hal::stm32::$spi, hal::spi::Disabled, u16>,
            ) -> Self {
                Self { _channel, spi }
            }
        }

        // Note(unsafe): This is safe because the DMA request line is logically owned by this module.
        // Additionally, the SPI is owned by this structure and is known to be configured for u16 word
        // sizes.
        unsafe impl TargetAddress<MemoryToPeripheral> for $spi {
            /// SPI is configured to operate using 16-bit transfer words.
            type MemSize = u16;

            /// SPI DMA requests are generated whenever TIM2 CHx ($dma_req) comparison occurs.
            const REQUEST_LINE: Option<u8> = Some(DMAReq::$dma_req as u8);

            /// Whenever the DMA request occurs, it should write into SPI's TX FIFO.
            fn address(&self) -> usize {
                &self.spi.inner().txdr as *const _ as usize
            }
        }

        /// Represents data associated with DAC.
        pub struct $name {
            next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
            // Note: SPI TX functionality may not be used from this structure to ensure safety with DMA.
            transfer: Transfer<
                hal::dma::dma::$data_stream<hal::stm32::DMA1>,
                $spi,
                MemoryToPeripheral,
                &'static mut [u16; SAMPLE_BUFFER_SIZE],
            >,
            first_transfer: bool,
        }

        impl $name {
            /// Construct the DAC output channel.
            ///
            /// # Args
            /// * `spi` - The SPI interface used to communicate with the ADC.
            /// * `stream` - The DMA stream used to write DAC codes over SPI.
            /// * `trigger_channel` - The sampling timer output compare channel for update triggers.
            pub fn new(
                spi: hal::spi::Spi<hal::stm32::$spi, hal::spi::Enabled, u16>,
                stream: hal::dma::dma::$data_stream<hal::stm32::DMA1>,
                trigger_channel: timers::tim2::$trigger_channel,
            ) -> Self {
                // Generate DMA events when an output compare of the timer hitting zero (timer roll over)
                // occurs.
                trigger_channel.listen_dma();
                trigger_channel.to_output_compare(0);

                // The stream constantly writes to the TX FIFO to write new update codes.
                let trigger_config = DmaConfig::default()
                    .memory_increment(true)
                    .peripheral_increment(false);

                // Listen for any potential SPI error signals, which may indicate that we are not generating
                // update codes.
                let mut spi = spi.disable();
                spi.listen(hal::spi::Event::Error);

                // Allow the SPI FIFOs to operate using only DMA data channels.
                spi.enable_dma_tx();

                // Enable SPI and start it in infinite transaction mode.
                spi.inner().cr1.modify(|_, w| w.spe().set_bit());
                spi.inner().cr1.modify(|_, w| w.cstart().started());

                // Construct the trigger stream to write from memory to the peripheral.
                let transfer: Transfer<_, _, MemoryToPeripheral, _> =
                    Transfer::init(
                        stream,
                        $spi::new(trigger_channel, spi),
                        // Note(unsafe): This buffer is only used once and provided for the DMA transfer.
                        unsafe { &mut DAC_BUF[$index][0] },
                        None,
                        trigger_config,
                    );

                Self {
                    transfer,
                    // Note(unsafe): This buffer is only used once and provided for the next DMA transfer.
                    next_buffer: unsafe { Some(&mut DAC_BUF[$index][1]) },
                    first_transfer: true,
                }
            }

            /// Acquire the next output buffer to populate it with DAC codes.
            pub fn acquire_buffer(
                &mut self,
            ) -> &'static mut [u16; SAMPLE_BUFFER_SIZE] {
                self.next_buffer.take().unwrap()
            }

            /// Enqueue the next buffer for transmission to the DAC.
            ///
            /// # Args
            /// * `data` - The next data to write to the DAC.
            pub fn release_buffer(
                &mut self,
                next_buffer: &'static mut [u16; SAMPLE_BUFFER_SIZE],
            ) {
                // If the last transfer was not complete, we didn't write all our previous DAC codes.
                // Wait for all the DAC codes to get written as well.
                if self.first_transfer {
                    self.first_transfer = false
                } else {
                    // Note: If a device hangs up, check that this conditional is passing correctly, as
                    // there is no time-out checks here in the interest of execution speed.
                    while !self.transfer.get_transfer_complete_flag() {}
                }

                // Start the next transfer.
                self.transfer.clear_interrupts();
                let (prev_buffer, _, _) =
                    self.transfer.next_transfer(next_buffer).unwrap();

                // .unwrap_none() https://github.com/rust-lang/rust/issues/62633
                self.next_buffer.replace(prev_buffer);
            }
        }
    };
}

dac_output!(Dac0Output, 0, Stream4, SPI4, Channel3, TIM2_CH3);
dac_output!(Dac1Output, 1, Stream5, SPI5, Channel4, TIM2_CH4);