Merge branch 'master' into feature/livestream

This commit is contained in:
Ryan Summers 2021-06-09 12:46:56 +02:00
commit e01d430e8e
30 changed files with 562 additions and 620 deletions

128
Cargo.lock generated
View File

@ -63,7 +63,7 @@ version = "0.2.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "5deb64efa5bd81e31fcd1938615a6d98c82eafcbcd787162b6f63b91d6bac5b3"
dependencies = [
"rustc_version",
"rustc_version 0.2.3",
]
[[package]]
@ -104,11 +104,11 @@ checksum = "14c189c53d098945499cdfa7ecc63567cf3886b3332b312a5b4585d8d3a6a610"
[[package]]
name = "cast"
version = "0.2.3"
version = "0.2.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "4b9434b9a5aa1450faa3f9cb14ea0e8c53bb5d2b3c1bfd1ab4fc03e9f33fbfb0"
checksum = "57cdfa5d50aad6cb4d44dcab6101a7f79925bd59d82ca42f38a9856a28865374"
dependencies = [
"rustc_version",
"rustc_version 0.3.3",
]
[[package]]
@ -214,7 +214,7 @@ dependencies = [
"easybench",
"miniconf",
"ndarray",
"num",
"num-complex",
"rand",
"serde",
]
@ -305,9 +305,9 @@ dependencies = [
[[package]]
name = "getrandom"
version = "0.2.2"
version = "0.2.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "c9495705279e7140bf035dde1f6e750c162df8b625267cd52cc44e0b156732c8"
checksum = "7fcd999463524c52659517fe2cea98493cfe485d10565e7b0fb07dbba7ad2753"
dependencies = [
"cfg-if",
"libc",
@ -374,9 +374,9 @@ dependencies = [
[[package]]
name = "libc"
version = "0.2.93"
version = "0.2.95"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "9385f66bf6105b241aa65a61cb923ef20efc665cb9f9bb50ac2f0c4b7f378d41"
checksum = "789da6d93f1b866ffe175afc5322a4d76c038605a1c3319bb57b06967ca98a36"
[[package]]
name = "log"
@ -395,17 +395,18 @@ checksum = "c75de51135344a4f8ed3cfe2720dc27736f7711989703a0b43aadf3753c55577"
[[package]]
name = "matrixmultiply"
version = "0.3.0"
version = "0.3.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "1300bdbea33ec2836b01ff1f5a6eed8bad66d0c31f94d9b7993407a8b054c3a1"
checksum = "5a8a15b776d9dfaecd44b03c5828c2199cddff5247215858aac14624f8d6b741"
dependencies = [
"rawpointer",
]
[[package]]
name = "mcp23017"
version = "0.1.1"
source = "git+https://github.com/lucazulian/mcp23017.git?rev=523d71d#523d71dcb11fc0ea4bd9385ef2527ae7a7eee987"
version = "1.0.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "2c32fd6627e73f1cfa95c00ddcdcb5a6a6ddbd10b308d08588a502c018b6e12c"
dependencies = [
"embedded-hal",
]
@ -471,19 +472,6 @@ version = "0.5.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "1bcece43b12349917e096cddfa66107277f123e6c96a5aea78711dc601a47152"
[[package]]
name = "num"
version = "0.4.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "43db66d1170d347f9a065114077f7dccb00c1b9478c89384490a3425279a4606"
dependencies = [
"num-complex",
"num-integer",
"num-iter",
"num-rational",
"num-traits",
]
[[package]]
name = "num-complex"
version = "0.4.0"
@ -491,6 +479,7 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "26873667bbbb7c5182d4a37c1add32cdf09f841af72da53318fdb81543c15085"
dependencies = [
"num-traits",
"serde",
]
[[package]]
@ -503,28 +492,6 @@ dependencies = [
"num-traits",
]
[[package]]
name = "num-iter"
version = "0.1.42"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "b2021c8337a54d21aca0d59a92577a029af9431cb59b909b03252b9c164fad59"
dependencies = [
"autocfg",
"num-integer",
"num-traits",
]
[[package]]
name = "num-rational"
version = "0.4.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "d41702bd167c2df5520b384281bc111a4b5efcf7fbc4c9c222c815b07e0a6a6a"
dependencies = [
"autocfg",
"num-integer",
"num-traits",
]
[[package]]
name = "num-traits"
version = "0.2.14"
@ -561,6 +528,15 @@ version = "1.0.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "acbf547ad0c65e31259204bd90935776d1c693cec2f4ff7abb7a1bbbd40dfe58"
[[package]]
name = "pest"
version = "2.1.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "10f4872ae94d7b90ae48754df22fd42ad52ce740b8f370b03da4835417403e53"
dependencies = [
"ucd-trie",
]
[[package]]
name = "ppv-lite86"
version = "0.2.10"
@ -569,9 +545,9 @@ checksum = "ac74c624d6b2d21f425f752262f42188365d7b8ff1aff74c82e45136510a4857"
[[package]]
name = "proc-macro2"
version = "1.0.26"
version = "1.0.27"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "a152013215dca273577e18d2bf00fa862b89b24169fb78c4c95aeb07992c9cec"
checksum = "f0d8caf72986c1a598726adc988bb5984792ef84f5ee5aa50209145ee8077038"
dependencies = [
"unicode-xid",
]
@ -673,7 +649,16 @@ version = "0.2.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "138e3e0acb6c9fb258b19b67cb8abd63c00679d2851805ea151465464fe9030a"
dependencies = [
"semver",
"semver 0.9.0",
]
[[package]]
name = "rustc_version"
version = "0.3.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "f0dfe2087c51c460008730de8b57e6a320782fbfb312e1f4d520e6c6fae155ee"
dependencies = [
"semver 0.11.0",
]
[[package]]
@ -688,7 +673,16 @@ version = "0.9.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "1d7eb9ef2c18661902cc47e535f9bc51b78acd254da71d375c2f6720d9a40403"
dependencies = [
"semver-parser",
"semver-parser 0.7.0",
]
[[package]]
name = "semver"
version = "0.11.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "f301af10236f6df4160f7c3f04eec6dbc70ace82d23326abad5edee88801c6b6"
dependencies = [
"semver-parser 0.10.2",
]
[[package]]
@ -697,6 +691,15 @@ version = "0.7.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "388a1df253eca08550bef6c72392cfe7c30914bf41df5269b68cbd6ff8f570a3"
[[package]]
name = "semver-parser"
version = "0.10.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "00b0bef5b7f9e0df16536d3961cfb6e84331c065b4066afb39768d0e319411f7"
dependencies = [
"pest",
]
[[package]]
name = "serde"
version = "1.0.126"
@ -740,9 +743,9 @@ dependencies = [
[[package]]
name = "smoltcp"
version = "0.7.1"
version = "0.7.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "97173c1ef35b0a09304cb3882eba594761243005847cbbf6124f966e8da6519a"
checksum = "11b5647cc4676e9358e6b15b6536b34e5b413e5ae946a06b3f85e713132bcdfa"
dependencies = [
"bitflags",
"byteorder",
@ -809,8 +812,7 @@ dependencies = [
[[package]]
name = "stm32h7xx-hal"
version = "0.9.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "67034b80041bc33a48df1c1c435b6ae3bb18c35e42aa7e702ce8363b96793398"
source = "git+https://github.com/quartiq/stm32h7xx-hal.git?rev=b0b8a93#b0b8a930b2c3bc5fcebc2e905b4c5e13360111a5"
dependencies = [
"bare-metal 1.0.0",
"cast",
@ -827,9 +829,9 @@ dependencies = [
[[package]]
name = "syn"
version = "1.0.68"
version = "1.0.72"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "3ce15dd3ed8aa2f8eeac4716d6ef5ab58b6b9256db41d7e1a0224c2788e8fd87"
checksum = "a1e8cdbefb79a9a5a65e0db8b47b723ee907b7c7f8496c76a1770b5c310bab82"
dependencies = [
"proc-macro2",
"quote",
@ -842,6 +844,12 @@ version = "1.13.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "879f6906492a7cd215bfa4cf595b600146ccfac0c79bcbd1f3000162af5e8b06"
[[package]]
name = "ucd-trie"
version = "0.1.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "56dee185309b50d1f11bfedef0fe6d036842e3fb77413abef29f8f8d1c5d4c1c"
[[package]]
name = "ufmt-write"
version = "0.1.0"
@ -850,9 +858,9 @@ checksum = "e87a2ed6b42ec5e28cc3b94c09982969e9227600b2e3dcbc1db927a84c06bd69"
[[package]]
name = "unicode-xid"
version = "0.2.1"
version = "0.2.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "f7fe0bb3479651439c9112f72b6c505038574c9fbb575ed1bf3b797fa39dd564"
checksum = "8ccb82d61f80a663efe1f787a51b16b5a51e3314d6ac365b08639f52387b33f3"
[[package]]
name = "vcell"

View File

@ -45,20 +45,19 @@ ad9959 = { path = "ad9959" }
miniconf = "0.1.0"
shared-bus = {version = "0.2.2", features = ["cortex-m"] }
serde-json-core = "0.4"
mcp23017 = "1.0"
# rtt-target bump
[dependencies.rtt-logger]
git = "https://github.com/quartiq/rtt-logger.git"
rev = "70b0eb5"
# rewrite
[dependencies.mcp23017]
git = "https://github.com/lucazulian/mcp23017.git"
rev = "523d71d"
# fast double buffered DMA without poisoning and buffer swapping
[dependencies.stm32h7xx-hal]
features = ["stm32h743v", "rt", "unproven", "ethernet", "quadspi"]
version = "0.9.0"
# version = "0.9.0"
git = "https://github.com/quartiq/stm32h7xx-hal.git"
rev = "b0b8a93"
# link.x section start/end
[patch.crates-io.cortex-m-rt]

View File

@ -43,6 +43,7 @@ pub enum Mode {
/// The configuration registers within the AD9959 DDS device. The values of each register are
/// equivalent to the address.
#[allow(clippy::upper_case_acronyms)]
pub enum Register {
CSR = 0x00,
FR1 = 0x01,
@ -596,6 +597,22 @@ impl ProfileSerializer {
self.index += value.len() + 1;
}
fn pad(&mut self) {
// Pad the buffer to 32-bit (4 byte) alignment by adding dummy writes to CSR and LSRR.
match self.index & 3 {
3 => {
// For a level of 3, we have to pad with 5 bytes to align things.
self.add_write(Register::CSR, &[(self.mode as u8) << 1]);
self.add_write(Register::LSRR, &[0, 0]);
}
2 => self.add_write(Register::CSR, &[(self.mode as u8) << 1]),
1 => self.add_write(Register::LSRR, &[0, 0]),
0 => {}
_ => unreachable!(),
}
}
/// Get the serialized profile as a slice of 32-bit words.
///
/// # Note
@ -604,21 +621,8 @@ impl ProfileSerializer {
///
/// # Returns
/// A slice of `u32` words representing the serialized profile.
pub fn finalize<'a>(&'a mut self) -> &[u32] {
// Pad the buffer to 32-bit alignment by adding dummy writes to CSR and LSRR.
let padding = 4 - (self.index % 4);
match padding {
1 => {
// For a pad size of 1, we have to pad with 5 bytes to align things.
self.add_write(Register::CSR, &[(self.mode as u8) << 1]);
self.add_write(Register::LSRR, &[0, 0]);
}
2 => self.add_write(Register::CSR, &[(self.mode as u8) << 1]),
3 => self.add_write(Register::LSRR, &[0, 0]),
4 => {}
_ => unreachable!(),
}
pub fn finalize<'a>(&'a mut self) -> &'a [u32] {
self.pad();
unsafe {
core::slice::from_raw_parts::<'a, u32>(
&self.data as *const _ as *const u32,

View File

@ -6,7 +6,7 @@ edition = "2018"
[dependencies]
serde = { version = "1.0", features = ["derive"], default-features = false }
num = { version = "0.4.0", default-features = false }
num-complex = { version = "0.4.0", features = ["serde"], default-features = false }
miniconf = "0.1"
[dev-dependencies]

View File

@ -44,11 +44,11 @@ fn pll_bench() {
let mut dut = PLL::default();
println!(
"PLL::update(t, 12, 12): {}",
bench_env(0x241, |x| dut.update(*x, 12, 12))
bench_env(Some(0x241), |x| dut.update(*x, 12, 12))
);
println!(
"PLL::update(t, sf, sp): {}",
bench_env((0x241, 21, 20), |(x, p, q)| dut.update(*x, *p, *q))
bench_env((Some(0x241), 21, 20), |(x, p, q)| dut.update(*x, *p, *q))
);
}

View File

@ -77,6 +77,8 @@ pub fn atan2(y: i32, x: i32) -> i32 {
if sign.1 {
angle = angle.wrapping_neg();
// Negation ends up in slightly faster assembly
// angle = !angle;
}
angle

View File

@ -1,4 +1,4 @@
pub use num::Complex;
pub use num_complex::Complex;
use super::{atan2, cossin};

View File

@ -45,7 +45,7 @@ impl PLL {
/// The signal's phase/frequency is reconstructed relative to the sampling period.
///
/// Args:
/// * `x`: New input phase sample.
/// * `x`: New input phase sample or None if a sample has been missed.
/// * `shift_frequency`: Frequency error scaling. The frequency gain per update is
/// `1/(1 << shift_frequency)`.
/// * `shift_phase`: Phase error scaling. The phase gain is `1/(1 << shift_phase)`
@ -55,26 +55,31 @@ impl PLL {
/// A tuple of instantaneous phase and frequency (the current phase increment).
pub fn update(
&mut self,
x: i32,
x: Option<i32>,
shift_frequency: u8,
shift_phase: u8,
) -> (i32, i32) {
debug_assert!((1..=30).contains(&shift_frequency));
debug_assert!((1..=30).contains(&shift_phase));
let e = x.wrapping_sub(self.f);
self.f = self.f.wrapping_add(
(1i32 << (shift_frequency - 1))
.wrapping_add(e)
.wrapping_sub(self.x)
>> shift_frequency,
);
self.x = x;
let f = self.f.wrapping_add(
(1i32 << (shift_phase - 1))
.wrapping_add(e)
.wrapping_sub(self.y)
>> shift_phase,
);
let f = if let Some(x) = x {
let e = x.wrapping_sub(self.f);
self.f = self.f.wrapping_add(
(1i32 << (shift_frequency - 1))
.wrapping_add(e)
.wrapping_sub(self.x)
>> shift_frequency,
);
self.x = x;
self.f.wrapping_add(
(1i32 << (shift_phase - 1))
.wrapping_add(e)
.wrapping_sub(self.y)
>> shift_phase,
)
} else {
self.x = self.x.wrapping_add(self.f);
self.f
};
self.y = self.y.wrapping_add(f);
(self.y, f)
}
@ -86,7 +91,7 @@ mod tests {
#[test]
fn mini() {
let mut p = PLL::default();
let (y, f) = p.update(0x10000, 8, 4);
let (y, f) = p.update(Some(0x10000), 8, 4);
assert_eq!(y, 0x1100);
assert_eq!(f, y);
}
@ -100,7 +105,7 @@ mod tests {
let mut x = 0i32;
for i in 0..n {
x = x.wrapping_add(f0);
let (y, f) = p.update(x, shift.0, shift.1);
let (y, f) = p.update(Some(x), shift.0, shift.1);
if i > n / 4 {
assert_eq!(f.wrapping_sub(f0).abs() <= 1, true);
}

View File

@ -87,20 +87,3 @@ pub fn macc_i32(y0: i32, x: &[i32], a: &[i32], shift: u32) -> i32 {
.fold(y0, |y, xa| y + xa);
(y >> shift) as i32
}
/// Combine high and low i32 into a single downscaled i32, saturating the type.
pub fn saturating_scale(lo: i32, hi: i32, shift: u32) -> i32 {
debug_assert!(shift & 31 == shift);
let shift_hi = 31 - shift;
debug_assert!(shift_hi & 31 == shift_hi);
let over = hi >> shift;
if over < -1 {
i32::MIN
} else if over > 0 {
i32::MAX
} else {
(lo >> shift) + (hi << shift_hi)
}
}

View File

@ -16,6 +16,27 @@ pub fn overflowing_sub(y: i32, x: i32) -> (i32, i8) {
(delta, wrap)
}
/// Combine high and low i32 into a single downscaled i32, saturating monotonically.
///
/// Args:
/// `lo`: LSB i32 to scale down by `shift` and range-extend with `hi`
/// `hi`: MSB i32 to scale up and extend `lo` with. Output will be clipped if
/// `hi` exceeds the output i32 range.
/// `shift`: Downscale `lo` by that many bits. Values from 1 to 32 inclusive
/// are valid.
pub fn saturating_scale(lo: i32, hi: i32, shift: u32) -> i32 {
debug_assert!(shift > 0);
debug_assert!(shift <= 32);
let hi_range = -1 << (shift - 1);
if hi <= hi_range {
i32::MIN - hi_range
} else if -hi <= hi_range {
hi_range - i32::MIN
} else {
(lo >> shift) + (hi << (32 - shift))
}
}
/// Overflow unwrapper.
///
/// This is unwrapping as in the phase and overflow unwrapping context, not

View File

@ -16,6 +16,7 @@ from gmqtt import Client as MqttClient
LOGGER = logging.getLogger(__name__)
class Miniconf:
"""An asynchronous API for controlling Miniconf devices using MQTT."""
@ -33,64 +34,64 @@ class Miniconf:
client: A connected MQTT5 client.
prefix: The MQTT toptic prefix of the device to control.
"""
self.uuid = uuid.uuid1()
self.request_id = 0
self.client = client
self.prefix = prefix
self.inflight = {}
self.client.on_message = self._handle_response
self.client.subscribe(f'{prefix}/response/{self.uuid.hex}')
self.response_topic = f'{prefix}/response/{uuid.uuid1().hex}'
self.client.subscribe(self.response_topic)
def _handle_response(self, _client, _topic, payload, _qos, properties):
def _handle_response(self, _client, topic, payload, _qos, properties):
"""Callback function for when messages are received over MQTT.
Args:
_client: The MQTT client.
_topic: The topic that the message was received on.
topic: The topic that the message was received on.
payload: The payload of the message.
_qos: The quality-of-service level of the received packet
properties: A dictionary of properties associated with the message.
"""
# Extract corrleation data from the properties
correlation_data = json.loads(properties['correlation_data'][0].decode('ascii'))
if topic == self.response_topic:
# Extract request_id corrleation data from the properties
request_id = int.from_bytes(
properties['correlation_data'][0], 'big')
# Get the request ID from the correlation data
request_id = correlation_data['request_id']
self.inflight[request_id].set_result(json.loads(payload))
del self.inflight[request_id]
else:
LOGGER.warn('Unexpected message on "%s"', topic)
self.inflight[request_id].set_result(json.loads(payload))
del self.inflight[request_id]
async def command(self, path, value):
async def command(self, path, value, retain=True):
"""Write the provided data to the specified path.
Args:
path: The path to write the message to.
value: The value to write to the path.
retain: Retain the MQTT message changing the setting
by the broker.
Returns:
The response to the command as a dictionary.
"""
setting_topic = f'{self.prefix}/settings/{path}'
response_topic = f'{self.prefix}/response/{self.uuid.hex}'
topic = f'{self.prefix}/settings/{path}'
# Assign a unique identifier to this update request.
request_id = self.request_id
self.request_id += 1
assert request_id not in self.inflight, 'Invalid ID encountered'
correlation_data = json.dumps({
'request_id': request_id,
}).encode('ascii')
value = json.dumps(value)
LOGGER.info('Sending %s to "%s"', value, setting_topic)
fut = asyncio.get_running_loop().create_future()
self.inflight[request_id] = fut
self.client.publish(setting_topic, payload=value, qos=0, retain=True,
response_topic=response_topic,
correlation_data=correlation_data)
# Assign unique correlation data for response dispatch
assert self.request_id not in self.inflight
self.inflight[self.request_id] = fut
correlation_data = self.request_id.to_bytes(4, 'big')
self.request_id += 1
payload = json.dumps(value)
LOGGER.info('Sending "%s" to "%s"', value, topic)
self.client.publish(
topic, payload=payload, qos=0, retain=retain,
response_topic=self.response_topic,
correlation_data=correlation_data)
return await fut
@ -100,16 +101,20 @@ def main():
description='Miniconf command line interface.',
formatter_class=argparse.RawDescriptionHelpFormatter,
epilog='''Examples:
%(prog)s dt/sinara/stabilizer afe/0='"G2"' iir_ch/0/0=\
'{"y_min": -32767, "y_max": 32767, "y_offset": 0, "ba": [1.0, 0, 0, 0, 0]}'
%(prog)s dt/sinara/dual-iir/00-11-22-33-aa-bb iir_ch/0/0=\
'{"y_min":-32767,"y_max":32767,"y_offset":0,"ba":[1.0,0,0,0,0]}'
%(prog)s dt/sinara/lockin/00-11-22-33-aa-bb afe/0='"G2"'\
''')
parser.add_argument('-v', '--verbose', action='count', default=0,
help='Increase logging verbosity')
parser.add_argument('--broker', '-b', default='mqtt', type=str,
help='The MQTT broker address')
parser.add_argument('--no-retain', '-n', default=False,
action='store_true',
help='Do not retain the affected settings')
parser.add_argument('prefix', type=str,
help='The MQTT topic prefix of the target')
parser.add_argument('settings', metavar="KEY=VALUE", nargs='+',
parser.add_argument('settings', metavar="PATH=VALUE", nargs='+',
help='JSON encoded values for settings path keys.')
args = parser.parse_args()
@ -122,9 +127,10 @@ def main():
async def configure_settings():
interface = await Miniconf.create(args.prefix, args.broker)
for key_value in args.settings:
path, value = key_value.split("=", 1)
response = await interface.command(path, json.loads(value))
for setting in args.settings:
path, value = setting.split("=", 1)
response = await interface.command(path, json.loads(value),
not args.no_retain)
print(f'{path}: {response}')
if response['code'] != 0:
return response['code']

View File

@ -2,19 +2,28 @@
#![no_std]
#![no_main]
use stabilizer::{hardware, net};
use miniconf::Miniconf;
use serde::Deserialize;
use core::sync::atomic::{fence, Ordering};
use dsp::iir;
use hardware::{
Adc0Input, Adc1Input, AdcCode, AfeGain, Dac0Output, Dac1Output, DacCode,
DigitalInput0, DigitalInput1, InputPin, SystemTimer, AFE0, AFE1,
};
use net::{
BlockGenerator, NetworkUsers, Telemetry, TelemetryBuffer, NetworkState,
use stabilizer::{
flatten_closures,
hardware::{
self,
adc::{Adc0Input, Adc1Input, AdcCode},
afe::Gain,
dac::{Dac0Output, Dac1Output, DacCode},
embedded_hal::digital::v2::InputPin,
hal,
system_timer::SystemTimer,
DigitalInput0, DigitalInput1, AFE0, AFE1,
},
net::{
miniconf::Miniconf,
serde::Deserialize,
telemetry::{Telemetry, TelemetryBuffer},
NetworkState, NetworkUsers,
data_stream::BlockGenerator,
},
};
const SCALE: f32 = i16::MAX as _;
@ -24,7 +33,7 @@ const IIR_CASCADE_LENGTH: usize = 1;
#[derive(Clone, Copy, Debug, Deserialize, Miniconf)]
pub struct Settings {
afe: [AfeGain; 2],
afe: [Gain; 2],
iir_ch: [[iir::IIR; IIR_CASCADE_LENGTH]; 2],
allow_hold: bool,
force_hold: bool,
@ -35,7 +44,7 @@ impl Default for Settings {
fn default() -> Self {
Self {
// Analog frontend programmable gain amplifier gains (G1, G2, G5, G10)
afe: [AfeGain::G1, AfeGain::G1],
afe: [Gain::G1, Gain::G1],
// IIR filter tap gains are an array `[b0, b1, b2, a1, a2]` such that the
// new output is computed as `y0 = a1*y1 + a2*y2 + b0*x0 + b1*x1 + b2*x2`.
// The array is `iir_state[channel-index][cascade-index][coeff-index]`.
@ -52,7 +61,7 @@ impl Default for Settings {
}
}
#[rtic::app(device = stm32h7xx_hal::stm32, peripherals = true, monotonic = stabilizer::hardware::SystemTimer)]
#[rtic::app(device = stabilizer::hardware::hal::stm32, peripherals = true, monotonic = stabilizer::hardware::system_timer::SystemTimer)]
const APP: () = {
struct Resources {
afes: (AFE0, AFE1),
@ -72,7 +81,8 @@ const APP: () = {
#[init(spawn=[telemetry, settings_update, ethernet_link])]
fn init(c: init::Context) -> init::LateResources {
// Configure the microcontroller
let (mut stabilizer, _pounder) = hardware::setup(c.core, c.device);
let (mut stabilizer, _pounder) =
hardware::setup::setup(c.core, c.device);
let mut network = NetworkUsers::new(
stabilizer.net.stack,
@ -110,7 +120,7 @@ const APP: () = {
generator,
network,
digital_inputs: stabilizer.digital_inputs,
telemetry: net::TelemetryBuffer::default(),
telemetry: TelemetryBuffer::default(),
settings: Settings::default(),
}
}
@ -134,54 +144,66 @@ const APP: () = {
#[task(binds=DMA1_STR4, resources=[adcs, digital_inputs, dacs, iir_state, settings, telemetry, generator], priority=2)]
#[inline(never)]
#[link_section = ".itcm.process"]
fn process(c: process::Context) {
let adc_samples = [
c.resources.adcs.0.acquire_buffer(),
c.resources.adcs.1.acquire_buffer(),
];
let dac_samples = [
c.resources.dacs.0.acquire_buffer(),
c.resources.dacs.1.acquire_buffer(),
];
fn process(mut c: process::Context) {
let process::Resources {
adcs: (ref mut adc0, ref mut adc1),
dacs: (ref mut dac0, ref mut dac1),
ref digital_inputs,
ref settings,
ref mut iir_state,
ref mut telemetry,
} = c.resources;
let digital_inputs = [
c.resources.digital_inputs.0.is_high().unwrap(),
c.resources.digital_inputs.1.is_high().unwrap(),
digital_inputs.0.is_high().unwrap(),
digital_inputs.1.is_high().unwrap(),
];
telemetry.digital_inputs = digital_inputs;
let hold = c.resources.settings.force_hold
|| (digital_inputs[1] && c.resources.settings.allow_hold);
let hold =
settings.force_hold || (digital_inputs[1] && settings.allow_hold);
for channel in 0..adc_samples.len() {
for sample in 0..adc_samples[0].len() {
let mut y = f32::from(adc_samples[channel][sample] as i16);
for i in 0..c.resources.iir_state[channel].len() {
y = c.resources.settings.iir_ch[channel][i].update(
&mut c.resources.iir_state[channel][i],
y,
hold,
);
}
// Note(unsafe): The filter limits ensure that the value is in range.
// The truncation introduces 1/2 LSB distortion.
let y = unsafe { y.to_int_unchecked::<i16>() };
// Convert to DAC code
dac_samples[channel][sample] = DacCode::from(y).0;
flatten_closures!(with_buffer, adc0, adc1, dac0, dac1, {
let adc_samples = [adc0, adc1];
let dac_samples = [dac0, dac1];
// Preserve instruction and data ordering w.r.t. DMA flag access.
fence(Ordering::SeqCst);
for channel in 0..adc_samples.len() {
adc_samples[channel]
.iter()
.zip(dac_samples[channel].iter_mut())
.map(|(ai, di)| {
let x = f32::from(*ai as i16);
let y = settings.iir_ch[channel]
.iter()
.zip(iir_state[channel].iter_mut())
.fold(x, |yi, (ch, state)| {
ch.update(state, yi, hold)
});
// Note(unsafe): The filter limits must ensure that the value is in range.
// The truncation introduces 1/2 LSB distortion.
let y: i16 = unsafe { y.to_int_unchecked() };
// Convert to DAC code
*di = DacCode::from(y).0;
})
.last();
}
}
// Stream the data.
c.resources.generator.send(&adc_samples, &dac_samples);
// Stream the data.
c.resources.generator.send(&adc_samples, &dac_samples);
// Update telemetry measurements.
c.resources.telemetry.adcs =
[AdcCode(adc_samples[0][0]), AdcCode(adc_samples[1][0])];
// Update telemetry measurements.
telemetry.adcs =
[AdcCode(adc_samples[0][0]), AdcCode(adc_samples[1][0])];
c.resources.telemetry.dacs =
[DacCode(dac_samples[0][0]), DacCode(dac_samples[1][0])];
telemetry.dacs =
[DacCode(dac_samples[0][0]), DacCode(dac_samples[1][0])];
c.resources.telemetry.digital_inputs = digital_inputs;
// Preserve instruction and data ordering w.r.t. DMA flag access.
fence(Ordering::SeqCst);
});
}
#[idle(resources=[network], spawn=[settings_update])]
@ -238,27 +260,27 @@ const APP: () = {
#[task(binds = ETH, priority = 1)]
fn eth(_: eth::Context) {
unsafe { stm32h7xx_hal::ethernet::interrupt_handler() }
unsafe { hal::ethernet::interrupt_handler() }
}
#[task(binds = SPI2, priority = 3)]
fn spi2(_: spi2::Context) {
panic!("ADC0 input overrun");
panic!("ADC0 SPI error");
}
#[task(binds = SPI3, priority = 3)]
fn spi3(_: spi3::Context) {
panic!("ADC1 input overrun");
panic!("ADC1 SPI error");
}
#[task(binds = SPI4, priority = 3)]
fn spi4(_: spi4::Context) {
panic!("DAC0 output error");
panic!("DAC0 SPI error");
}
#[task(binds = SPI5, priority = 3)]
fn spi5(_: spi5::Context) {
panic!("DAC1 output error");
panic!("DAC1 SPI error");
}
extern "C" {

View File

@ -2,23 +2,31 @@
#![no_std]
#![no_main]
use embedded_hal::digital::v2::InputPin;
use serde::Deserialize;
use core::sync::atomic::{fence, Ordering};
use dsp::{Accu, Complex, ComplexExt, Lockin, RPLL};
use stabilizer::net;
use stabilizer::hardware::{
design_parameters, setup, Adc0Input, Adc1Input, AdcCode, AfeGain,
Dac0Output, Dac1Output, DacCode, DigitalInput0, DigitalInput1,
InputStamper, SystemTimer, AFE0, AFE1,
use stabilizer::{
flatten_closures,
hardware::{
self,
adc::{Adc0Input, Adc1Input, AdcCode},
afe::Gain,
dac::{Dac0Output, Dac1Output, DacCode},
design_parameters,
embedded_hal::digital::v2::InputPin,
hal,
input_stamper::InputStamper,
system_timer::SystemTimer,
DigitalInput0, DigitalInput1, AFE0, AFE1,
},
net::{
miniconf::Miniconf,
serde::Deserialize,
telemetry::{Telemetry, TelemetryBuffer},
NetworkState, NetworkUsers,
},
};
use miniconf::Miniconf;
use net::{NetworkState, NetworkUsers, Telemetry, TelemetryBuffer};
// A constant sinusoid to send on the DAC output.
// Full-scale gives a +/- 10.24V amplitude waveform. Scale it down to give +/- 1V.
const ONE: i16 = ((1.0 / 10.24) * i16::MAX as f32) as _;
@ -45,7 +53,7 @@ enum LockinMode {
#[derive(Copy, Clone, Debug, Deserialize, Miniconf)]
pub struct Settings {
afe: [AfeGain; 2],
afe: [Gain; 2],
lockin_mode: LockinMode,
pll_tc: [u8; 2],
@ -61,7 +69,7 @@ pub struct Settings {
impl Default for Settings {
fn default() -> Self {
Self {
afe: [AfeGain::G1; 2],
afe: [Gain::G1; 2],
lockin_mode: LockinMode::External,
@ -78,7 +86,7 @@ impl Default for Settings {
}
}
#[rtic::app(device = stm32h7xx_hal::stm32, peripherals = true, monotonic = stabilizer::hardware::SystemTimer)]
#[rtic::app(device = stabilizer::hardware::hal::stm32, peripherals = true, monotonic = stabilizer::hardware::system_timer::SystemTimer)]
const APP: () = {
struct Resources {
afes: (AFE0, AFE1),
@ -97,7 +105,8 @@ const APP: () = {
#[init(spawn=[settings_update, telemetry, ethernet_link])]
fn init(c: init::Context) -> init::LateResources {
// Configure the microcontroller
let (mut stabilizer, _pounder) = setup(c.core, c.device);
let (mut stabilizer, _pounder) =
hardware::setup::setup(c.core, c.device);
let network = NetworkUsers::new(
stabilizer.net.stack,
@ -143,7 +152,7 @@ const APP: () = {
network,
digital_inputs: stabilizer.digital_inputs,
timestamper: stabilizer.timestamper,
telemetry: net::TelemetryBuffer::default(),
telemetry: TelemetryBuffer::default(),
settings,
@ -162,26 +171,22 @@ const APP: () = {
#[task(binds=DMA1_STR4, resources=[adcs, dacs, lockin, timestamper, pll, settings, telemetry], priority=2)]
#[inline(never)]
#[link_section = ".itcm.process"]
fn process(c: process::Context) {
let adc_samples = [
c.resources.adcs.0.acquire_buffer(),
c.resources.adcs.1.acquire_buffer(),
];
let mut dac_samples = [
c.resources.dacs.0.acquire_buffer(),
c.resources.dacs.1.acquire_buffer(),
];
let lockin = c.resources.lockin;
let settings = c.resources.settings;
fn process(mut c: process::Context) {
let process::Resources {
adcs: (ref mut adc0, ref mut adc1),
dacs: (ref mut dac0, ref mut dac1),
ref settings,
ref mut telemetry,
ref mut lockin,
ref mut pll,
ref mut timestamper,
} = c.resources;
let (reference_phase, reference_frequency) = match settings.lockin_mode
{
LockinMode::External => {
let timestamp =
c.resources.timestamper.latest_timestamp().unwrap_or(None); // Ignore data from timer capture overflows.
let (pll_phase, pll_frequency) = c.resources.pll.update(
let timestamp = timestamper.latest_timestamp().unwrap_or(None); // Ignore data from timer capture overflows.
let (pll_phase, pll_frequency) = pll.update(
timestamp.map(|t| t as i32),
settings.pll_tc[0],
settings.pll_tc[1],
@ -208,45 +213,55 @@ const APP: () = {
reference_phase.wrapping_mul(settings.lockin_harmonic),
);
let output: Complex<i32> = adc_samples[0]
.iter()
// Zip in the LO phase.
.zip(Accu::new(sample_phase, sample_frequency))
// Convert to signed, MSB align the ADC sample, update the Lockin (demodulate, filter)
.map(|(&sample, phase)| {
let s = (sample as i16 as i32) << 16;
lockin.update(s, phase, settings.lockin_tc)
})
// Decimate
.last()
.unwrap()
* 2; // Full scale assuming the 2f component is gone.
flatten_closures!(with_buffer, adc0, adc1, dac0, dac1, {
let adc_samples = [adc0, adc1];
let mut dac_samples = [dac0, dac1];
// Convert to DAC data.
for (channel, samples) in dac_samples.iter_mut().enumerate() {
for (i, sample) in samples.iter_mut().enumerate() {
let value = match settings.output_conf[channel] {
Conf::Magnitude => output.abs_sqr() as i32 >> 16,
Conf::Phase => output.arg() >> 16,
Conf::LogPower => (output.log2() << 24) as i32 >> 16,
Conf::ReferenceFrequency => {
reference_frequency as i32 >> 16
}
Conf::InPhase => output.re >> 16,
Conf::Quadrature => output.im >> 16,
Conf::Modulation => DAC_SEQUENCE[i] as i32,
};
// Preserve instruction and data ordering w.r.t. DMA flag access.
fence(Ordering::SeqCst);
*sample = DacCode::from(value as i16).0;
let output: Complex<i32> = adc_samples[0]
.iter()
// Zip in the LO phase.
.zip(Accu::new(sample_phase, sample_frequency))
// Convert to signed, MSB align the ADC sample, update the Lockin (demodulate, filter)
.map(|(&sample, phase)| {
let s = (sample as i16 as i32) << 16;
lockin.update(s, phase, settings.lockin_tc)
})
// Decimate
.last()
.unwrap()
* 2; // Full scale assuming the 2f component is gone.
// Convert to DAC data.
for (channel, samples) in dac_samples.iter_mut().enumerate() {
for (i, sample) in samples.iter_mut().enumerate() {
let value = match settings.output_conf[channel] {
Conf::Magnitude => output.abs_sqr() as i32 >> 16,
Conf::Phase => output.arg() >> 16,
Conf::LogPower => (output.log2() << 24) as i32 >> 16,
Conf::ReferenceFrequency => {
reference_frequency as i32 >> 16
}
Conf::InPhase => output.re >> 16,
Conf::Quadrature => output.im >> 16,
Conf::Modulation => DAC_SEQUENCE[i] as i32,
};
*sample = DacCode::from(value as i16).0;
}
}
}
// Update telemetry measurements.
telemetry.adcs =
[AdcCode(adc_samples[0][0]), AdcCode(adc_samples[1][0])];
// Update telemetry measurements.
c.resources.telemetry.adcs =
[AdcCode(adc_samples[0][0]), AdcCode(adc_samples[1][0])];
telemetry.dacs =
[DacCode(dac_samples[0][0]), DacCode(dac_samples[1][0])];
c.resources.telemetry.dacs =
[DacCode(dac_samples[0][0]), DacCode(dac_samples[1][0])];
// Preserve instruction and data ordering w.r.t. DMA flag access.
fence(Ordering::SeqCst);
});
}
#[idle(resources=[network], spawn=[settings_update])]
@ -309,27 +324,7 @@ const APP: () = {
#[task(binds = ETH, priority = 1)]
fn eth(_: eth::Context) {
unsafe { stm32h7xx_hal::ethernet::interrupt_handler() }
}
#[task(binds = SPI2, priority = 3)]
fn spi2(_: spi2::Context) {
panic!("ADC0 input overrun");
}
#[task(binds = SPI3, priority = 3)]
fn spi3(_: spi3::Context) {
panic!("ADC1 input overrun");
}
#[task(binds = SPI4, priority = 3)]
fn spi4(_: spi4::Context) {
panic!("DAC0 output error");
}
#[task(binds = SPI5, priority = 3)]
fn spi5(_: spi5::Context) {
panic!("DAC1 output error");
unsafe { hal::ethernet::interrupt_handler() }
}
extern "C" {

View File

@ -29,15 +29,9 @@
///! available. When enough samples have been collected, a transfer-complete interrupt is generated
///! and the ADC samples are available for processing.
///!
///! The SPI peripheral internally has an 8- or 16-byte TX and RX FIFO, which corresponds to a 4- or
///! 8-sample buffer for incoming ADC samples. During the handling of the DMA transfer completion,
///! there is a small window where buffers are swapped over where it's possible that a sample could
///! be lost. In order to avoid this, the SPI RX FIFO is effectively used as a "sample overflow"
///! region and can buffer a number of samples until the next DMA transfer is configured. If a DMA
///! transfer is still not set in time, the SPI peripheral will generate an input-overrun interrupt.
///! This interrupt then serves as a means of detecting if samples have been lost, which will occur
///! whenever data processing takes longer than the collection period.
///!
///! After a complete transfer of a batch of samples, the inactive buffer is available to the
///! user for processing. The processing must complete before the DMA transfer of the next batch
///! completes.
///!
///! ## Starting Data Collection
///!
@ -68,26 +62,26 @@
///! sample DMA requests, which can be completed by setting e.g. ADC0's comparison to a counter
///! value of 0 and ADC1's comparison to a counter value of 1.
///!
///! In this implementation, single buffer mode DMA transfers are used because the SPI RX FIFO can
///! be used as a means to both detect and buffer ADC samples during the buffer swap-over. Because
///! of this, double-buffered mode does not offer any advantages over single-buffered mode (unless
///! double-buffered mode offers less overhead due to the DMA disable/enable procedure).
///! In this implementation, double buffer mode DMA transfers are used because the SPI RX FIFOs
///! have finite depth, FIFO access is slower than AXISRAM access, and because the single
///! buffer mode DMA disable/enable and buffer update sequence is slow.
use stm32h7xx_hal as hal;
use super::design_parameters::SAMPLE_BUFFER_SIZE;
use super::design_parameters::{SampleBuffer, SAMPLE_BUFFER_SIZE};
use super::timers;
use hal::dma::{
config::Priority,
dma::{DMAReq, DmaConfig},
traits::TargetAddress,
MemoryToPeripheral, PeripheralToMemory, Transfer,
DMAError, MemoryToPeripheral, PeripheralToMemory, Transfer,
};
/// A type representing an ADC sample.
#[derive(Copy, Clone)]
pub struct AdcCode(pub u16);
#[allow(clippy::from_over_into)]
impl Into<f32> for AdcCode {
/// Convert raw ADC codes to/from voltage levels.
///
@ -119,8 +113,7 @@ static mut SPI_EOT_CLEAR: [u32; 1] = [0x00];
// processed). Note that the contents of AXI SRAM is uninitialized, so the buffer contents on
// startup are undefined. The dimensions are `ADC_BUF[adc_index][ping_pong_index][sample_index]`.
#[link_section = ".axisram.buffers"]
static mut ADC_BUF: [[[u16; SAMPLE_BUFFER_SIZE]; 2]; 2] =
[[[0; SAMPLE_BUFFER_SIZE]; 2]; 2];
static mut ADC_BUF: [[SampleBuffer; 2]; 2] = [[[0; SAMPLE_BUFFER_SIZE]; 2]; 2];
macro_rules! adc_input {
($name:ident, $index:literal, $trigger_stream:ident, $data_stream:ident, $clear_stream:ident,
@ -192,12 +185,11 @@ macro_rules! adc_input {
/// Represents data associated with ADC.
pub struct $name {
next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
transfer: Transfer<
hal::dma::dma::$data_stream<hal::stm32::DMA1>,
hal::spi::Spi<hal::stm32::$spi, hal::spi::Disabled, u16>,
PeripheralToMemory,
&'static mut [u16; SAMPLE_BUFFER_SIZE],
&'static mut SampleBuffer,
hal::dma::DBTransfer,
>,
trigger_transfer: Transfer<
@ -316,6 +308,7 @@ macro_rules! adc_input {
// data stream is used to trigger a transfer completion interrupt.
let data_config = DmaConfig::default()
.memory_increment(true)
.double_buffer(true)
.transfer_complete_interrupt($index == 1)
.priority(Priority::VeryHigh);
@ -333,17 +326,14 @@ macro_rules! adc_input {
Transfer::init(
data_stream,
spi,
// Note(unsafe): The ADC_BUF[$index][0] is "owned" by this peripheral.
// Note(unsafe): The ADC_BUF[$index] is "owned" by this peripheral.
// It shall not be used anywhere else in the module.
unsafe { &mut ADC_BUF[$index][0] },
None,
unsafe { Some(&mut ADC_BUF[$index][1]) },
data_config,
);
Self {
// Note(unsafe): The ADC_BUF[$index][1] is "owned" by this peripheral. It
// shall not be used anywhere else in the module.
next_buffer: unsafe { Some(&mut ADC_BUF[$index][1]) },
transfer: data_transfer,
trigger_transfer,
clear_transfer,
@ -364,27 +354,17 @@ macro_rules! adc_input {
}
/// Obtain a buffer filled with ADC samples.
/// Wait for the transfer of the currently active buffer to complete,
/// then call a function on the now inactive buffer and acknowledge the
/// transfer complete flag.
///
/// # Returns
/// A reference to the underlying buffer that has been filled with ADC samples.
pub fn acquire_buffer(&mut self) -> &[u16; SAMPLE_BUFFER_SIZE] {
// Wait for the transfer to fully complete before continuing. Note: If a device
// hangs up, check that this conditional is passing correctly, as there is no
// time-out checks here in the interest of execution speed.
while !self.transfer.get_transfer_complete_flag() {}
let next_buffer = self.next_buffer.take().unwrap();
// Start the next transfer.
self.transfer.clear_interrupts();
let (prev_buffer, _, _) =
self.transfer.next_transfer(next_buffer).unwrap();
// .unwrap_none() https://github.com/rust-lang/rust/issues/62633
self.next_buffer.replace(prev_buffer);
self.next_buffer.as_ref().unwrap()
/// NOTE(unsafe): Memory safety and access ordering is not guaranteed
/// (see the HAL DMA docs).
pub fn with_buffer<F, R>(&mut self, f: F) -> Result<R, DMAError>
where
F: FnOnce(&mut SampleBuffer) -> R,
{
unsafe { self.transfer.next_dbm_transfer_with(|buf, _current| f(buf)) }
}
}
}

View File

@ -52,13 +52,13 @@
///! served promptly after the transfer completes.
use stm32h7xx_hal as hal;
use super::design_parameters::SAMPLE_BUFFER_SIZE;
use super::design_parameters::{SampleBuffer, SAMPLE_BUFFER_SIZE};
use super::timers;
use hal::dma::{
dma::{DMAReq, DmaConfig},
traits::TargetAddress,
MemoryToPeripheral, Transfer,
DMAError, MemoryToPeripheral, Transfer,
};
// The following global buffers are used for the DAC code DMA transfers. Two buffers are used for
@ -66,14 +66,14 @@ use hal::dma::{
// processed). Note that the contents of AXI SRAM is uninitialized, so the buffer contents on
// startup are undefined. The dimensions are `ADC_BUF[adc_index][ping_pong_index][sample_index]`.
#[link_section = ".axisram.buffers"]
static mut DAC_BUF: [[[u16; SAMPLE_BUFFER_SIZE]; 3]; 2] =
[[[0; SAMPLE_BUFFER_SIZE]; 3]; 2];
static mut DAC_BUF: [[SampleBuffer; 2]; 2] = [[[0; SAMPLE_BUFFER_SIZE]; 2]; 2];
/// Custom type for referencing DAC output codes.
/// The internal integer is the raw code written to the DAC output register.
#[derive(Copy, Clone)]
pub struct DacCode(pub u16);
#[allow(clippy::from_over_into)]
impl Into<f32> for DacCode {
fn into(self) -> f32 {
// The DAC output range in bipolar mode (including the external output op-amp) is +/- 4.096
@ -105,7 +105,7 @@ macro_rules! dac_output {
_channel: timers::tim2::$trigger_channel,
spi: hal::spi::Spi<hal::stm32::$spi, hal::spi::Disabled, u16>,
) -> Self {
Self { _channel, spi }
Self { spi, _channel }
}
/// Start the SPI and begin operating in a DMA-driven transfer mode.
@ -137,13 +137,12 @@ macro_rules! dac_output {
/// Represents data associated with DAC.
pub struct $name {
next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
// Note: SPI TX functionality may not be used from this structure to ensure safety with DMA.
transfer: Transfer<
hal::dma::dma::$data_stream<hal::stm32::DMA1>,
$spi,
MemoryToPeripheral,
&'static mut [u16; SAMPLE_BUFFER_SIZE],
&'static mut SampleBuffer,
hal::dma::DBTransfer,
>,
}
@ -198,33 +197,26 @@ macro_rules! dac_output {
trigger_config,
);
Self {
transfer,
// Note(unsafe): This buffer is only used once and provided for the next DMA transfer.
next_buffer: unsafe { Some(&mut DAC_BUF[$index][2]) },
}
Self { transfer }
}
pub fn start(&mut self) {
self.transfer.start(|spi| spi.start_dma());
}
/// Acquire the next output buffer to populate it with DAC codes.
pub fn acquire_buffer(&mut self) -> &mut [u16; SAMPLE_BUFFER_SIZE] {
// Note: If a device hangs up, check that this conditional is passing correctly, as
// there is no time-out checks here in the interest of execution speed.
while !self.transfer.get_transfer_complete_flag() {}
let next_buffer = self.next_buffer.take().unwrap();
// Start the next transfer.
let (prev_buffer, _, _) =
self.transfer.next_transfer(next_buffer).unwrap();
// .unwrap_none() https://github.com/rust-lang/rust/issues/62633
self.next_buffer.replace(prev_buffer);
self.next_buffer.as_mut().unwrap()
/// Wait for the transfer of the currently active buffer to complete,
/// then call a function on the now inactive buffer and acknowledge the
/// transfer complete flag.
///
/// NOTE(unsafe): Memory safety and access ordering is not guaranteed
/// (see the HAL DMA docs).
pub fn with_buffer<F, R>(&mut self, f: F) -> Result<R, DMAError>
where
F: FnOnce(&mut SampleBuffer) -> R,
{
unsafe {
self.transfer.next_dbm_transfer_with(|buf, _current| f(buf))
}
}
}
};

View File

@ -50,5 +50,7 @@ pub const ADC_SAMPLE_TICKS: u16 = 1 << ADC_SAMPLE_TICKS_LOG2;
pub const SAMPLE_BUFFER_SIZE_LOG2: u8 = 3;
pub const SAMPLE_BUFFER_SIZE: usize = 1 << SAMPLE_BUFFER_SIZE_LOG2;
pub type SampleBuffer = [u16; SAMPLE_BUFFER_SIZE];
// The MQTT broker IPv4 address
pub const MQTT_BROKER: [u8; 4] = [10, 34, 16, 10];

View File

@ -1,28 +1,19 @@
pub use embedded_hal;
///! Module for all hardware-specific setup of Stabilizer
use stm32h7xx_hal as hal;
pub use stm32h7xx_hal as hal;
// Re-export for the DigitalInputs below:
pub use embedded_hal::digital::v2::InputPin;
mod adc;
mod afe;
mod configuration;
mod cycle_counter;
mod dac;
pub mod adc;
pub mod afe;
pub mod cycle_counter;
pub mod dac;
pub mod design_parameters;
mod digital_input_stamper;
mod eeprom;
pub mod input_stamper;
pub mod pounder;
mod system_timer;
mod timers;
pub mod setup;
pub mod system_timer;
pub use adc::{Adc0Input, Adc1Input, AdcCode};
pub use afe::Gain as AfeGain;
pub use cycle_counter::CycleCounter;
pub use dac::{Dac0Output, Dac1Output, DacCode};
pub use digital_input_stamper::InputStamper;
pub use pounder::DdsOutput;
pub use system_timer::SystemTimer;
mod eeprom;
mod timers;
// Type alias for the analog front-end (AFE) for ADC0.
pub type AFE0 = afe::ProgrammableGainAmplifier<
@ -52,8 +43,6 @@ pub type NetworkStack = smoltcp_nal::NetworkStack<
pub type EthernetPhy = hal::ethernet::phy::LAN8742A<hal::ethernet::EthernetMAC>;
pub use configuration::{setup, PounderDevices, StabilizerDevices};
#[inline(never)]
#[panic_handler]
fn panic(info: &core::panic::PanicInfo) -> ! {

View File

@ -30,16 +30,16 @@ pub trait AttenuatorInterface {
// Read all the channels, modify the channel of interest, and write all the channels back.
// This ensures the staging register and the output register are always in sync.
let mut channels = [0_u8; 4];
self.read_all_attenuators(&mut channels)?;
self.transfer_attenuators(&mut channels)?;
// The lowest 2 bits of the 8-bit shift register on the attenuator are ignored. Shift the
// attenuator code into the upper 6 bits of the register value. Note that the attenuator
// treats inputs as active-low, so the code is inverted before writing.
channels[channel as usize] = (!attenuation_code) << 2;
self.write_all_attenuators(&channels)?;
channels[channel as usize] = !(attenuation_code << 2);
self.transfer_attenuators(&mut channels)?;
// Finally, latch the output of the updated channel to force it into an active state.
self.latch_attenuators(channel)?;
self.latch_attenuator(channel)?;
Ok(attenuation_code as f32 / 2.0)
}
@ -57,8 +57,8 @@ pub trait AttenuatorInterface {
// Reading the data always shifts data out of the staging registers, so we perform a
// duplicate write-back to ensure the staging register is always equal to the output
// register.
self.read_all_attenuators(&mut channels)?;
self.write_all_attenuators(&channels)?;
self.transfer_attenuators(&mut channels)?;
self.transfer_attenuators(&mut channels)?;
// The attenuation code is stored in the upper 6 bits of the register, where each LSB
// represents 0.5 dB. The attenuator stores the code as active-low, so inverting the result
@ -74,13 +74,10 @@ pub trait AttenuatorInterface {
fn reset_attenuators(&mut self) -> Result<(), Error>;
fn latch_attenuators(&mut self, channel: Channel) -> Result<(), Error>;
fn read_all_attenuators(
fn latch_attenuator(&mut self, channel: Channel) -> Result<(), Error>;
fn transfer_attenuators(
&mut self,
channels: &mut [u8; 4],
) -> Result<(), Error>;
fn write_all_attenuators(
&mut self,
channels: &[u8; 4],
) -> Result<(), Error>;
}

View File

@ -52,9 +52,11 @@
///! compile-time-known register update sequence needed for the application, the serialization
///! process can be done once and then register values can be written into a pre-computed serialized
///! buffer to avoid the software overhead of much of the serialization process.
use log::warn;
use stm32h7xx_hal as hal;
use super::{hrtimer::HighResTimerE, QspiInterface};
use ad9959::{Channel, DdsConfig, ProfileSerializer};
use stm32h7xx_hal as hal;
/// The DDS profile update stream.
pub struct DdsOutput {

View File

@ -1,30 +1,30 @@
use super::hal;
use embedded_hal::{adc::OneShot, blocking::spi::Transfer};
use serde::{Deserialize, Serialize};
pub mod attenuators;
mod dds_output;
pub mod dds_output;
pub mod hrtimer;
mod rf_power;
pub mod rf_power;
#[cfg(feature = "pounder_v1_1")]
pub mod timestamp;
pub use dds_output::DdsOutput;
use super::hal;
use attenuators::AttenuatorInterface;
use rf_power::PowerMeasurementInterface;
use embedded_hal::{adc::OneShot, blocking::spi::Transfer};
const EXT_CLK_SEL_PIN: u8 = 8 + 7;
#[allow(dead_code)]
const OSC_EN_N_PIN: u8 = 8 + 6;
const ATT_RST_N_PIN: u8 = 8 + 5;
const ATT_LE3_PIN: u8 = 8 + 3;
const ATT_LE2_PIN: u8 = 8 + 2;
const ATT_LE1_PIN: u8 = 8 + 1;
const ATT_LE0_PIN: u8 = 8;
pub enum GpioPin {
Led4Green = 0,
Led5Red = 1,
Led6Green = 2,
Led7Red = 3,
Led8Green = 4,
Led9Red = 5,
AttLe0 = 8,
AttLe1 = 8 + 1,
AttLe2 = 8 + 2,
AttLe3 = 8 + 3,
AttRstN = 8 + 5,
OscEnN = 8 + 6,
ExtClkSel = 8 + 7,
}
#[derive(Debug, Copy, Clone)]
pub enum Error {
@ -37,13 +37,15 @@ pub enum Error {
Adc,
}
/// The numerical value (discriminant) of the Channel enum is the index in the attenuator shift
/// register as well as the attenuator latch enable signal index on the GPIO extender.
#[derive(Debug, Copy, Clone)]
#[allow(dead_code)]
pub enum Channel {
In0,
In1,
Out0,
Out1,
In0 = 0,
Out0 = 1,
In1 = 2,
Out1 = 3,
}
#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
@ -80,14 +82,14 @@ pub struct DdsClockConfig {
pub external_clock: bool,
}
impl Into<ad9959::Channel> for Channel {
impl From<Channel> for ad9959::Channel {
/// Translate pounder channels to DDS output channels.
fn into(self) -> ad9959::Channel {
match self {
Channel::In0 => ad9959::Channel::Two,
Channel::In1 => ad9959::Channel::Four,
Channel::Out0 => ad9959::Channel::One,
Channel::Out1 => ad9959::Channel::Three,
fn from(other: Channel) -> Self {
match other {
Channel::In0 => Self::Two,
Channel::In1 => Self::Four,
Channel::Out0 => Self::One,
Channel::Out1 => Self::Three,
}
}
}
@ -300,41 +302,35 @@ impl PounderDevices {
adc2_in_p,
};
// Configure power-on-default state for pounder. All LEDs are on, on-board oscillator
// selected, attenuators out of reset. Note that testing indicates the output state needs to
// be set first to properly update the output registers.
// Configure power-on-default state for pounder. All LEDs are off, on-board oscillator
// selected and enabled, attenuators out of reset. Note that testing indicates the
// output state needs to be set first to properly update the output registers.
devices
.mcp23017
.all_pin_mode(mcp23017::PinMode::OUTPUT)
.map_err(|_| Error::I2c)?;
devices
.mcp23017
.write_gpio(mcp23017::Port::GPIOA, 0x3F)
.write_gpio(mcp23017::Port::GPIOA, 0x00)
.map_err(|_| Error::I2c)?;
devices
.mcp23017
.write_gpio(mcp23017::Port::GPIOB, 1 << 5)
.map_err(|_| Error::I2c)?;
devices
.mcp23017
.digital_write(EXT_CLK_SEL_PIN, false)
.write_gpio(mcp23017::Port::GPIOB, 0x2F)
.map_err(|_| Error::I2c)?;
Ok(devices)
}
}
impl AttenuatorInterface for PounderDevices {
impl attenuators::AttenuatorInterface for PounderDevices {
/// Reset all of the attenuators to a power-on default state.
fn reset_attenuators(&mut self) -> Result<(), Error> {
self.mcp23017
.digital_write(ATT_RST_N_PIN, false)
.write_gpio(mcp23017::Port::GPIOB, 0x0f)
.map_err(|_| Error::I2c)?;
// TODO: Measure the I2C transaction speed to the RST pin to ensure that the delay is
// sufficient. Document the delay here.
// Duration of one I2C transaction is sufficiently long.
self.mcp23017
.digital_write(ATT_RST_N_PIN, true)
.write_gpio(mcp23017::Port::GPIOB, 0x2f)
.map_err(|_| Error::I2c)?;
Ok(())
@ -344,31 +340,24 @@ impl AttenuatorInterface for PounderDevices {
///
/// Args:
/// * `channel` - The attenuator channel to latch.
fn latch_attenuators(&mut self, channel: Channel) -> Result<(), Error> {
let pin = match channel {
Channel::In0 => ATT_LE0_PIN,
Channel::In1 => ATT_LE2_PIN,
Channel::Out0 => ATT_LE1_PIN,
Channel::Out1 => ATT_LE3_PIN,
};
fn latch_attenuator(&mut self, channel: Channel) -> Result<(), Error> {
let pin = channel as u8;
self.mcp23017
.digital_write(pin, true)
.write_gpio(mcp23017::Port::GPIOB, 0x2f & !(1 << pin))
.map_err(|_| Error::I2c)?;
// TODO: Measure the I2C transaction speed to the RST pin to ensure that the delay is
// sufficient. Document the delay here.
// Duration of one I2C transaction is sufficiently long.
self.mcp23017
.digital_write(pin, false)
.write_gpio(mcp23017::Port::GPIOB, 0x2f)
.map_err(|_| Error::I2c)?;
Ok(())
}
/// Read the raw attenuation codes stored in the attenuator shift registers.
///
/// Args:
/// * `channels` - A slice to store the channel readings into.
fn read_all_attenuators(
/// * `channels` - A 4 byte slice to be shifted into the
/// attenuators and to contain the data shifted out.
fn transfer_attenuators(
&mut self,
channels: &mut [u8; 4],
) -> Result<(), Error> {
@ -378,26 +367,9 @@ impl AttenuatorInterface for PounderDevices {
Ok(())
}
/// Write the attenuator shift registers.
///
/// Args:
/// * `channels` - The data to write into the attenuators.
fn write_all_attenuators(
&mut self,
channels: &[u8; 4],
) -> Result<(), Error> {
let mut result = [0_u8; 4];
result.clone_from_slice(channels);
self.attenuator_spi
.transfer(&mut result)
.map_err(|_| Error::Spi)?;
Ok(())
}
}
impl PowerMeasurementInterface for PounderDevices {
impl rf_power::PowerMeasurementInterface for PounderDevices {
/// Sample an ADC channel.
///
/// Args:

View File

@ -1,20 +1,22 @@
use super::{Channel, Error};
/// Provide an interface to measure RF input power in dB.
/// Provide an interface to measure RF input power in dBm.
pub trait PowerMeasurementInterface {
fn sample_converter(&mut self, channel: Channel) -> Result<f32, Error>;
/// Measure the power of an input channel in dBm.
///
/// Note: This function assumes the input channel is connected to an AD8363 output.
///
/// Args:
/// * `channel` - The pounder channel to measure the power of in dBm.
/// * `channel` - The pounder input channel to measure the power of.
///
/// Returns:
/// Power in dBm after the digitally controlled attenuator before the amplifier.
fn measure_power(&mut self, channel: Channel) -> Result<f32, Error> {
let analog_measurement = self.sample_converter(channel)?;
// The AD8363 with VSET connected to VOUT provides an output voltage of 51.7mV / dB at
// 100MHz. It also indicates a y-intercept of -58dBm.
Ok(analog_measurement / 0.0517 - 58.0)
// The AD8363 with VSET connected to VOUT provides an output voltage of 51.7 mV/dB at
// 100MHz with an intercept of -58 dBm.
// It is placed behind a 20 dB tap.
Ok(analog_measurement * (1. / 0.0517) + (-58. + 20.))
}
}

View File

@ -13,50 +13,24 @@
///! Once the timer is configured, an input capture is configured to record the timer count
///! register. The input capture is configured to utilize an internal trigger for the input capture.
///! The internal trigger is selected such that when a sample is generated on ADC0, the input
///! capture is simultaneously triggered. This results in the input capture triggering identically
///! to when the ADC samples the input.
///!
///! Once the input capture is properly configured, a DMA transfer is configured to collect all of
///! timestamps. The DMA transfer collects 1 timestamp for each ADC sample collected. In order to
///! avoid potentially losing a timestamp for a sample, the DMA transfer operates in double-buffer
///! mode. As soon as the DMA transfer completes, the hardware automatically swaps over to a second
///! buffer to continue capturing. This alleviates timing sensitivities of the DMA transfer
///! schedule.
///! capture is simultaneously triggered. That trigger is prescaled (its rate is divided) by the
///! batch size. This results in the input capture triggering identically to when the ADC samples
///! the last sample of the batch. That sample is then available for processing by the user.
use crate::hardware::{design_parameters, timers};
use core::convert::TryFrom;
use stm32h7xx_hal as hal;
use hal::dma::{dma::DmaConfig, PeripheralToMemory, Transfer};
use crate::hardware::{design_parameters::SAMPLE_BUFFER_SIZE, timers};
// Three buffers are required for double buffered mode - 2 are owned by the DMA stream and 1 is the
// working data provided to the application. These buffers must exist in a DMA-accessible memory
// region. Note that AXISRAM is not initialized on boot, so their initial contents are undefined.
#[link_section = ".axisram.buffers"]
static mut BUF: [[u16; SAMPLE_BUFFER_SIZE]; 3] = [[0; SAMPLE_BUFFER_SIZE]; 3];
/// Software unit to timestamp stabilizer ADC samples using an external pounder reference clock.
pub struct Timestamper {
next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
timer: timers::PounderTimestampTimer,
transfer: Transfer<
hal::dma::dma::Stream0<hal::stm32::DMA2>,
timers::tim8::Channel1InputCapture,
PeripheralToMemory,
&'static mut [u16; SAMPLE_BUFFER_SIZE],
hal::dma::DBTransfer,
>,
capture_channel: timers::tim8::Channel1InputCapture,
}
impl Timestamper {
/// Construct the pounder sample timestamper.
///
/// # Note
/// The DMA is immediately configured after instantiation. It will not collect any samples
/// until the sample timer begins to cause input capture triggers.
///
/// # Args
/// * `timestamp_timer` - The timer peripheral used for capturing timestamps from.
/// * `stream` - The DMA stream to use for collecting timestamps.
/// * `capture_channel` - The input capture channel for collecting timestamps.
/// * `sampling_timer` - The stabilizer ADC sampling timer.
/// * `_clock_input` - The input pin for the external clock from Pounder.
@ -65,18 +39,12 @@ impl Timestamper {
/// The new pounder timestamper in an operational state.
pub fn new(
mut timestamp_timer: timers::PounderTimestampTimer,
stream: hal::dma::dma::Stream0<hal::stm32::DMA2>,
capture_channel: timers::tim8::Channel1,
sampling_timer: &mut timers::SamplingTimer,
_clock_input: hal::gpio::gpioa::PA0<
hal::gpio::Alternate<hal::gpio::AF3>,
>,
) -> Self {
let config = DmaConfig::default()
.memory_increment(true)
.circular_buffer(true)
.double_buffer(true);
// The sampling timer should generate a trigger output when CH1 comparison occurs.
sampling_timer.generate_trigger(timers::TriggerGenerator::ComparePulse);
@ -85,64 +53,39 @@ impl Timestamper {
timestamp_timer.set_trigger_source(timers::TriggerSource::Trigger1);
// The capture channel should capture whenever the trigger input occurs.
let input_capture = capture_channel
let mut input_capture = capture_channel
.into_input_capture(timers::tim8::CaptureSource1::TRC);
input_capture.listen_dma();
// The data transfer is always a transfer of data from the peripheral to a RAM buffer.
let data_transfer: Transfer<_, _, PeripheralToMemory, _, _> =
Transfer::init(
stream,
input_capture,
// Note(unsafe): BUF[0] and BUF[1] are "owned" by this peripheral.
// They shall not be used anywhere else in the module.
unsafe { &mut BUF[0] },
unsafe { Some(&mut BUF[1]) },
config,
);
// Capture at the batch period.
input_capture.configure_prescaler(
timers::Prescaler::try_from(
design_parameters::SAMPLE_BUFFER_SIZE_LOG2,
)
.unwrap(),
);
Self {
timer: timestamp_timer,
transfer: data_transfer,
// Note(unsafe): BUF[2] is "owned" by this peripheral. It shall not be used anywhere
// else in the module.
next_buffer: unsafe { Some(&mut BUF[2]) },
capture_channel: input_capture,
}
}
/// Start the DMA transfer for collecting timestamps.
#[allow(dead_code)]
/// Start collecting timestamps.
pub fn start(&mut self) {
self.transfer
.start(|capture_channel| capture_channel.enable());
self.capture_channel.enable();
}
/// Update the period of the underlying timestamp timer.
#[allow(dead_code)]
pub fn update_period(&mut self, period: u16) {
self.timer.set_period_ticks(period);
}
/// Obtain a buffer filled with timestamps.
/// Obtain a timestamp.
///
/// # Returns
/// A reference to the underlying buffer that has been filled with timestamps.
#[allow(dead_code)]
pub fn acquire_buffer(&mut self) -> &[u16; SAMPLE_BUFFER_SIZE] {
// Wait for the transfer to fully complete before continuing.
// Note: If a device hangs up, check that this conditional is passing correctly, as there is
// no time-out checks here in the interest of execution speed.
while !self.transfer.get_transfer_complete_flag() {}
let next_buffer = self.next_buffer.take().unwrap();
// Start the next transfer.
let (prev_buffer, _, _) =
self.transfer.next_transfer(next_buffer).unwrap();
self.next_buffer.replace(prev_buffer); // .unwrap_none() https://github.com/rust-lang/rust/issues/62633
self.next_buffer.as_ref().unwrap()
/// A `Result` potentially indicating capture overflow and containing a `Option` of a captured
/// timestamp.
pub fn latest_timestamp(&mut self) -> Result<Option<u16>, Option<u16>> {
self.capture_channel.latest_capture()
}
}

View File

@ -12,9 +12,10 @@ use smoltcp_nal::smoltcp;
use embedded_hal::digital::v2::{InputPin, OutputPin};
use super::{
adc, afe, cycle_counter::CycleCounter, dac, design_parameters,
digital_input_stamper, eeprom, pounder, system_timer, timers, DdsOutput,
DigitalInput0, DigitalInput1, EthernetPhy, NetworkStack, AFE0, AFE1,
adc, afe, cycle_counter::CycleCounter, dac, design_parameters, eeprom,
input_stamper::InputStamper, pounder, pounder::dds_output::DdsOutput,
system_timer, timers, DigitalInput0, DigitalInput1, EthernetPhy,
NetworkStack, AFE0, AFE1,
};
const NUM_TCP_SOCKETS: usize = 4;
@ -105,7 +106,7 @@ pub struct StabilizerDevices {
pub afes: (AFE0, AFE1),
pub adcs: (adc::Adc0Input, adc::Adc1Input),
pub dacs: (dac::Dac0Output, dac::Dac1Output),
pub timestamper: digital_input_stamper::InputStamper,
pub timestamper: InputStamper,
pub adc_dac_timer: timers::SamplingTimer,
pub timestamp_timer: timers::TimestampTimer,
pub net: NetworkDevices,
@ -256,11 +257,6 @@ pub fn setup(
let dma_streams =
hal::dma::dma::StreamsTuple::new(device.DMA1, ccdr.peripheral.DMA1);
// Early, before the DMA1 peripherals (#272)
#[cfg(feature = "pounder_v1_1")]
let dma2_streams =
hal::dma::dma::StreamsTuple::new(device.DMA2, ccdr.peripheral.DMA2);
// Configure timer 2 to trigger conversions for the ADC
let mut sampling_timer = {
// The timer frequency is manually adjusted below, so the 1KHz setting here is a
@ -537,10 +533,7 @@ pub fn setup(
let input_stamper = {
let trigger = gpioa.pa3.into_alternate_af2();
digital_input_stamper::InputStamper::new(
trigger,
timestamp_timer_channels.ch4,
)
InputStamper::new(trigger, timestamp_timer_channels.ch4)
};
let digital_inputs = {
@ -836,7 +829,7 @@ pub fn setup(
let scl = gpiob.pb8.into_alternate_af4().set_open_drain();
let i2c1 = device.I2C1.i2c(
(scl, sda),
100.khz(),
400.khz(),
ccdr.peripheral.I2C1,
&ccdr.clocks,
);
@ -980,7 +973,6 @@ pub fn setup(
pounder::timestamp::Timestamper::new(
timestamp_timer,
dma2_streams.0,
tim8_channels.ch1,
&mut sampling_timer,
etr_pin,

View File

@ -1,5 +1,6 @@
///! The sampling timer is used for managing ADC sampling and external reference timestamping.
use super::hal;
use num_enum::TryFromPrimitive;
use hal::stm32::{
// TIM1 and TIM8 have identical registers.
@ -34,6 +35,8 @@ pub enum TriggerSource {
/// Prescalers for externally-supplied reference clocks.
#[allow(dead_code)]
#[derive(TryFromPrimitive)]
#[repr(u8)]
pub enum Prescaler {
Div1 = 0b00,
Div2 = 0b01,
@ -353,6 +356,21 @@ macro_rules! timer_channels {
let regs = unsafe { &*<$TY>::ptr() };
regs.[< $ccmrx _input >]().modify(|_, w| w.[< ic $index f >]().bits(filter as u8));
}
/// Configure the input capture prescaler.
///
/// # Args
/// * `psc` - Prescaler exponent.
#[allow(dead_code)]
pub fn configure_prescaler(&mut self, prescaler: super::Prescaler) {
// Note(unsafe): This channel owns all access to the specific timer channel.
// Only atomic operations on completed on the timer registers.
let regs = unsafe { &*<$TY>::ptr() };
// Note(unsafe): Enum values are all valid.
#[allow(unused_unsafe)]
regs.[< $ccmrx _input >]().modify(|_, w| unsafe {
w.[< ic $index psc >]().bits(prescaler as u8)});
}
}
// Note(unsafe): This manually implements DMA support for input-capture channels. This

View File

@ -1,8 +1,18 @@
#![no_std]
#![cfg_attr(feature = "nightly", feature(core_intrinsics))]
#[macro_use]
extern crate log;
pub mod hardware;
pub mod net;
/// Macro to reduce rightward drift when calling the same closure-based API
/// on multiple structs simultaneously, e.g. when accessing DMA buffers.
/// This could be improved a bit using the tuple-based style from `mutex-trait`.
#[macro_export]
macro_rules! flatten_closures {
($fn:ident, $e:ident, $fun:block) => {
$e.$fn(|$e| $fun ).unwrap()
};
($fn:ident, $e:ident, $($es:ident),+, $fun:block) => {
$e.$fn(|$e| flatten_closures!($fn, $($es),*, $fun)).unwrap()
};
}

View File

@ -11,6 +11,7 @@
///! Respones to settings updates are sent without quality-of-service guarantees, so there's no
///! guarantee that the requestee will be informed that settings have been applied.
use heapless::String;
use log::info;
use super::{MqttMessage, NetworkReference, SettingsResponse, UpdateState};
use crate::hardware::design_parameters::MQTT_BROKER;
@ -102,7 +103,7 @@ where
let path = match topic.strip_prefix(prefix) {
// For paths, we do not want to include the leading slash.
Some(path) => {
if path.len() > 0 {
if !path.is_empty() {
&path[1..]
} else {
path
@ -116,9 +117,8 @@ where
let message: SettingsResponse = settings
.string_set(path.split('/').peekable(), message)
.and_then(|_| {
.map(|_| {
update = true;
Ok(())
})
.into();

View File

@ -5,31 +5,29 @@
///! telemetry (via MQTT), configuration of run-time settings (via MQTT + Miniconf), and live data
///! streaming over raw UDP/TCP sockets. This module encompasses the main processing routines
///! related to Stabilizer networking operations.
pub use heapless;
pub use miniconf;
pub use serde;
pub mod messages;
pub mod miniconf_client;
pub mod network_processor;
pub mod shared;
pub mod telemetry;
pub mod data_stream;
use crate::hardware::{cycle_counter::CycleCounter, EthernetPhy, NetworkStack};
use messages::{MqttMessage, SettingsResponse};
use miniconf_client::MiniconfClient;
use network_processor::NetworkProcessor;
use shared::NetworkManager;
use telemetry::TelemetryClient;
use core::fmt::Write;
use heapless::String;
use miniconf::Miniconf;
use serde::Serialize;
use core::fmt::Write;
mod data_stream;
mod messages;
mod miniconf_client;
mod network_processor;
mod shared;
mod telemetry;
pub use data_stream::BlockGenerator;
use crate::hardware::{CycleCounter, EthernetPhy, NetworkStack};
use data_stream::DataStream;
use messages::{MqttMessage, SettingsResponse};
pub use miniconf_client::MiniconfClient;
pub use network_processor::NetworkProcessor;
pub use shared::NetworkManager;
use smoltcp_nal::embedded_nal::SocketAddr;
pub use telemetry::{Telemetry, TelemetryBuffer, TelemetryClient};
pub type NetworkReference = shared::NetworkStackProxy<'static, NetworkStack>;
#[derive(Copy, Clone, PartialEq)]

View File

@ -4,7 +4,7 @@
///! The network processir is a small taks to regularly process incoming data over ethernet, handle
///! the ethernet PHY state, and reset the network as appropriate.
use super::{NetworkReference, UpdateState};
use crate::hardware::{CycleCounter, EthernetPhy};
use crate::hardware::{cycle_counter::CycleCounter, EthernetPhy};
/// Processor for managing network hardware.
pub struct NetworkProcessor {

View File

@ -16,7 +16,7 @@ use serde::Serialize;
use super::NetworkReference;
use crate::hardware::{
design_parameters::MQTT_BROKER, AdcCode, AfeGain, DacCode,
adc::AdcCode, afe::Gain, dac::DacCode, design_parameters::MQTT_BROKER,
};
/// The telemetry client for reporting telemetry data over MQTT.
@ -73,7 +73,7 @@ impl TelemetryBuffer {
///
/// # Returns
/// The finalized telemetry structure that can be serialized and reported.
pub fn finalize(self, afe0: AfeGain, afe1: AfeGain) -> Telemetry {
pub fn finalize(self, afe0: Gain, afe1: Gain) -> Telemetry {
let in0_volts = Into::<f32>::into(self.adcs[0]) / afe0.as_multiplier();
let in1_volts = Into::<f32>::into(self.adcs[1]) / afe1.as_multiplier();