fsagbuya

zynq-rs

Bare-metal Rust on Zynq-7000

Go to file

Astro 022da2a7a7 default.nix: update rustcSrc didn't fit with rust-nightly any more		2019-08-18 22:16:47 +02:00
.cargo	define custom target, use with cargo-xbuild	2019-08-06 22:03:04 +02:00
openocd	openocd: fix PL_TAPID for both zc706 and cora-z7-10	2019-08-10 20:59:07 +02:00
src	read clocks	2019-08-17 03:20:04 +02:00
Cargo.lock	update compiler-builtins	2019-08-06 14:15:40 +02:00
Cargo.toml	link again compiler_builtins	2019-06-09 01:00:58 +02:00
README.md	README: update to cargo-xbuild	2019-08-08 18:19:47 +02:00
armv7-none-eabihf.json	define custom target, use with cargo-xbuild	2019-08-06 22:03:04 +02:00
build.rs	PoC: boot, uart output in qemu	2019-05-05 14:56:23 +02:00
default.nix	default.nix: update rustcSrc	2019-08-18 22:16:47 +02:00
link.x	link.x: rm unneeded ALIGN(4)	2019-08-07 00:26:46 +02:00
qemu.gdb	PoC: boot, uart output in qemu	2019-05-05 14:56:23 +02:00
runner.sh	PoC: boot, uart output in qemu	2019-05-05 14:56:23 +02:00
shell.nix	define custom target, use with cargo-xbuild	2019-08-06 22:03:04 +02:00

Build

nix-shell --command "cargo xbuild --release"

Debug

Tested with the ZC706 board.

Run the Xilinx Microprocessor Debugger:

/opt/Xilinx/14.7/ISE_DS/EDK/bin/lin64/xmd

Connect to target (given it is connected and you have permissions):

connect arm hw

Leave xmd running.

Start the Xilinx version of the GNU debugger with your latest build:

/opt/Xilinx/14.7/ISE_DS/EDK/gnu/arm/lin/bin/arm-xilinx-linux-gnueabi-gdb zc706

Connect the debugger to xmd over TCP on localhost:

target remote :1234

Proceed using gdb with load, c

nix-shell --command "cargo xbuild --release"
openocd -f openocd/zc706.cfg

nix-shell --command "cargo xbuild --release --no-default-features --features=target_cora_z7_10"
openocd -f openocd/cora-z7-10.cfg