forked from M-Labs/zynq-rs
regs: properly emit doc_comments
This commit is contained in:
parent
56c2f1d833
commit
6bf210366a
149
src/eth/regs.rs
149
src/eth/regs.rs
|
|
@ -127,61 +127,87 @@ register!(net_ctrl, NetCtrl, RW, u32);
|
|||
register_bit!(net_ctrl, clear_stat_regs, 5);
|
||||
|
||||
register!(net_cfg, NetCfg, RW, u32);
|
||||
/// false for 10Mbps, true for 100Mbps
|
||||
register_bit!(net_cfg, speed, 0);
|
||||
register_bit!(net_cfg,
|
||||
/// false for 10Mbps, true for 100Mbps
|
||||
speed, 0);
|
||||
register_bit!(net_cfg, full_duplex, 1);
|
||||
/// Discard non-VLAN frames
|
||||
register_bit!(net_cfg, disc_non_vlan, 2);
|
||||
/// Accept all valid frames?
|
||||
register_bit!(net_cfg, copy_all, 4);
|
||||
/// Don't accept broadcast destination address
|
||||
register_bit!(net_cfg, no_broadcast, 5);
|
||||
/// Multicast hash enable
|
||||
register_bit!(net_cfg, multi_hash_en, 6);
|
||||
/// Unicast hash enable
|
||||
register_bit!(net_cfg, uni_hash_en, 7);
|
||||
/// Accept frames up to 1536 bytes (instead of up to 1518 bytes)
|
||||
register_bit!(net_cfg, rx_1536_byte_frames, 8);
|
||||
/// External address match enable - when set the external address
|
||||
/// match interface can be used to copy frames to memory.
|
||||
register_bit!(net_cfg, ext_addr_match_en, 9);
|
||||
/// Gigabit mode enable
|
||||
register_bit!(net_cfg, gige_en, 10);
|
||||
/// Enable TBI instead of GMII/MII interface?
|
||||
register_bit!(net_cfg, pcs_sel, 11);
|
||||
/// Retry test (reduces backoff between collisions to one slot)
|
||||
register_bit!(net_cfg, retry_test, 12);
|
||||
/// Pause frame enable
|
||||
register_bit!(net_cfg, pause_en, 13);
|
||||
/// Receive buffer offset
|
||||
register_bits!(net_cfg, rx_buf_offset, u8, 14, 15);
|
||||
/// Length field error frame discard
|
||||
register_bit!(net_cfg, len_err_frame_disc, 16);
|
||||
/// Write received frames to memory with Frame Check Sequence removed
|
||||
register_bit!(net_cfg, fcs_remove, 17);
|
||||
/// MDC clock divison
|
||||
register_bits!(net_cfg, mdc_clk_div, u8, 18, 20);
|
||||
/// Data bus width
|
||||
register_bits!(net_cfg, dbus_width, u8, 21, 22);
|
||||
/// Disable copy of pause frames
|
||||
register_bit!(net_cfg, dis_cp_pause_frame, 23);
|
||||
/// Receive checksum offload enable
|
||||
register_bit!(net_cfg, rx_chksum_offld_en, 24);
|
||||
/// Enable frames to be received in half-duplex mode while
|
||||
/// transmitting
|
||||
register_bit!(net_cfg, rx_hd_while_tx, 25);
|
||||
/// Ignore Rx Framce Check Sequence (errors will not be rejected)
|
||||
register_bit!(net_cfg, ignore_rx_fcs, 26);
|
||||
/// SGMII mode enable
|
||||
register_bit!(net_cfg, sgmii_en, 27);
|
||||
/// IPG stretch enable
|
||||
register_bit!(net_cfg, ipg_stretch_en, 28);
|
||||
/// Receive bad preamble
|
||||
register_bit!(net_cfg, rx_bad_preamble, 29);
|
||||
/// Ignore IPG rx_er
|
||||
register_bit!(net_cfg, ignore_ipg_rx_er, 30);
|
||||
/// NA
|
||||
register_bit!(net_cfg, unidir_en, 31);
|
||||
register_bit!(net_cfg,
|
||||
/// Discard non-VLAN frames
|
||||
disc_non_vlan, 2);
|
||||
register_bit!(net_cfg,
|
||||
/// Accept all valid frames?
|
||||
copy_all, 4);
|
||||
register_bit!(net_cfg,
|
||||
/// Don't accept broadcast destination address
|
||||
no_broadcast, 5);
|
||||
register_bit!(net_cfg,
|
||||
/// Multicast hash enable
|
||||
multi_hash_en, 6);
|
||||
register_bit!(net_cfg,
|
||||
/// Unicast hash enable
|
||||
uni_hash_en, 7);
|
||||
register_bit!(net_cfg,
|
||||
/// Accept frames up to 1536 bytes (instead of up to 1518 bytes)
|
||||
rx_1536_byte_frames, 8);
|
||||
register_bit!(net_cfg,
|
||||
/// match interface can be used to copy frames to memory.
|
||||
/// External address match enable - when set the external address
|
||||
ext_addr_match_en, 9);
|
||||
register_bit!(net_cfg,
|
||||
/// Gigabit mode enable
|
||||
gige_en, 10);
|
||||
register_bit!(net_cfg,
|
||||
/// Enable TBI instead of GMII/MII interface?
|
||||
pcs_sel, 11);
|
||||
register_bit!(net_cfg,
|
||||
/// Retry test (reduces backoff between collisions to one slot)
|
||||
retry_test, 12);
|
||||
register_bit!(net_cfg,
|
||||
/// Pause frame enable
|
||||
pause_en, 13);
|
||||
register_bits!(net_cfg,
|
||||
/// Receive buffer offset
|
||||
rx_buf_offset, u8, 14, 15);
|
||||
register_bit!(net_cfg,
|
||||
/// Length field error frame discard
|
||||
len_err_frame_disc, 16);
|
||||
register_bit!(net_cfg,
|
||||
/// Write received frames to memory with Frame Check Sequence removed
|
||||
fcs_remove, 17);
|
||||
register_bits!(net_cfg,
|
||||
/// MDC clock divison
|
||||
mdc_clk_div, u8, 18, 20);
|
||||
register_bits!(net_cfg,
|
||||
/// Data bus width
|
||||
dbus_width, u8, 21, 22);
|
||||
register_bit!(net_cfg,
|
||||
/// Disable copy of pause frames
|
||||
dis_cp_pause_frame, 23);
|
||||
register_bit!(net_cfg,
|
||||
/// Receive checksum offload enable
|
||||
rx_chksum_offld_en, 24);
|
||||
register_bit!(net_cfg,
|
||||
/// Enable frames to be received in half-duplex mode while
|
||||
/// transmitting
|
||||
rx_hd_while_tx, 25);
|
||||
register_bit!(net_cfg,
|
||||
/// Ignore Rx Framce Check Sequence (errors will not be rejected)
|
||||
ignore_rx_fcs, 26);
|
||||
register_bit!(net_cfg,
|
||||
/// SGMII mode enable
|
||||
sgmii_en, 27);
|
||||
register_bit!(net_cfg,
|
||||
/// IPG stretch enable
|
||||
ipg_stretch_en, 28);
|
||||
register_bit!(net_cfg,
|
||||
/// Receive bad preamble
|
||||
rx_bad_preamble, 29);
|
||||
register_bit!(net_cfg,
|
||||
/// Ignore IPG rx_er
|
||||
ignore_ipg_rx_er, 30);
|
||||
register_bit!(net_cfg,
|
||||
/// NA
|
||||
unidir_en, 31);
|
||||
|
||||
register!(net_status, NetStatus, RW, u32);
|
||||
register_bit!(net_status, pcs_link_state, 0);
|
||||
|
|
@ -250,14 +276,17 @@ pub enum PhyOperation {
|
|||
}
|
||||
|
||||
register!(phy_maint, PhyMaint, RW, u32);
|
||||
/// Read from/write to the PHY
|
||||
register_bits!(phy_maint, data, u16, 0, 15);
|
||||
register_bits!(phy_maint,
|
||||
/// Read from/write to the PHY
|
||||
data, u16, 0, 15);
|
||||
// Write `0b10`
|
||||
register_bits!(phy_maint, must_10, u8, 16, 17);
|
||||
/// Register address
|
||||
register_bits!(phy_maint, reg_addr, u8, 18, 22);
|
||||
/// PHY address
|
||||
register_bits!(phy_maint, phy_addr, u8, 23, 27);
|
||||
register_bits!(phy_maint,
|
||||
/// Register address
|
||||
reg_addr, u8, 18, 22);
|
||||
register_bits!(phy_maint,
|
||||
/// PHY address
|
||||
phy_addr, u8, 23, 27);
|
||||
register_bits_typed!(phy_maint, operation, u8, PhyOperation, 28, 29);
|
||||
// PHY clause 22 compliant (not clause 45)?
|
||||
register_bit!(phy_maint, clause_22, 30);
|
||||
|
|
|
|||
20
src/regs.rs
20
src/regs.rs
|
|
@ -121,8 +121,10 @@ macro_rules! register {
|
|||
/// Define a 1-bit field of a register
|
||||
#[macro_export]
|
||||
macro_rules! register_bit {
|
||||
($mod_name: ident, $name: ident, $bit: expr) => (
|
||||
($mod_name: ident, $(#[$outer:meta])* $name: ident, $bit: expr) => (
|
||||
$(#[$outer])*
|
||||
impl $mod_name::Read {
|
||||
#[allow(unused)]
|
||||
pub fn $name(&self) -> bool {
|
||||
use bit_field::BitField;
|
||||
|
||||
|
|
@ -130,7 +132,9 @@ macro_rules! register_bit {
|
|||
}
|
||||
}
|
||||
|
||||
$(#[$outer])*
|
||||
impl $mod_name::Write {
|
||||
#[allow(unused)]
|
||||
pub fn $name(mut self, value: bool) -> Self {
|
||||
use bit_field::BitField;
|
||||
|
||||
|
|
@ -144,8 +148,10 @@ macro_rules! register_bit {
|
|||
/// Define a multi-bit field of a register
|
||||
#[macro_export]
|
||||
macro_rules! register_bits {
|
||||
($mod_name: ident, $name: ident, $type: ty, $bit_begin: expr, $bit_end: expr) => (
|
||||
($mod_name: ident, $(#[$outer:meta])* $name: ident, $type: ty, $bit_begin: expr, $bit_end: expr) => (
|
||||
impl $mod_name::Read {
|
||||
#[allow(unused)]
|
||||
$(#[$outer])*
|
||||
pub fn $name(&self) -> $type {
|
||||
use bit_field::BitField;
|
||||
|
||||
|
|
@ -153,7 +159,10 @@ macro_rules! register_bits {
|
|||
}
|
||||
}
|
||||
|
||||
#[allow(unused)]
|
||||
$(#[$outer])*
|
||||
impl $mod_name::Write {
|
||||
#[allow(unused)]
|
||||
pub fn $name(mut self, value: $type) -> Self {
|
||||
use bit_field::BitField;
|
||||
|
||||
|
|
@ -170,8 +179,10 @@ macro_rules! register_bits {
|
|||
/// definition must be annotated with `#[repr($bit_type)]`!
|
||||
#[macro_export]
|
||||
macro_rules! register_bits_typed {
|
||||
($mod_name: ident, $name: ident, $bit_type: ty, $type: ty, $bit_begin: expr, $bit_end: expr) => (
|
||||
($mod_name: ident, $(#[$outer:meta])* $name: ident, $bit_type: ty, $type: ty, $bit_begin: expr, $bit_end: expr) => (
|
||||
impl $mod_name::Read {
|
||||
#[allow(unused)]
|
||||
$(#[$outer])*
|
||||
pub fn $name(&self) -> $type {
|
||||
use bit_field::BitField;
|
||||
|
||||
|
|
@ -181,6 +192,8 @@ macro_rules! register_bits_typed {
|
|||
}
|
||||
|
||||
impl $mod_name::Write {
|
||||
#[allow(unused)]
|
||||
$(#[$outer])*
|
||||
pub fn $name(mut self, value: $type) -> Self {
|
||||
use bit_field::BitField;
|
||||
|
||||
|
|
@ -196,6 +209,7 @@ macro_rules! register_bits_typed {
|
|||
macro_rules! register_at {
|
||||
($name: ident, $addr: expr, $ctor: ident) => (
|
||||
impl $name {
|
||||
#[allow(unused)]
|
||||
pub fn $ctor() -> &'static mut Self {
|
||||
let addr = $addr as *mut Self;
|
||||
unsafe { &mut *addr }
|
||||
|
|
|
|||
|
|
@ -1,5 +1,3 @@
|
|||
#![allow(unused)]
|
||||
|
||||
use core::fmt;
|
||||
use volatile_register::RW;
|
||||
|
||||
|
|
|
|||
|
|
@ -62,41 +62,56 @@ register_bit!(control, sttbrk, 7);
|
|||
register_bit!(control, stpbrk, 8);
|
||||
|
||||
register!(mode, Mode, RW, u32);
|
||||
/// Channel mode: Defines the mode of operation of the UART.
|
||||
register_bits_typed!(mode, chmode, u8, ChannelMode, 8, 9);
|
||||
/// Number of stop bits
|
||||
register_bits_typed!(mode, nbstop, u8, StopBits, 6, 7);
|
||||
/// Parity type select
|
||||
register_bits_typed!(mode, par, u8, ParityMode, 3, 5);
|
||||
/// Character length select
|
||||
register_bits!(mode, chrl, u8, 1, 2);
|
||||
/// Clock source select
|
||||
register_bit!(mode, clks, 0);
|
||||
register_bits_typed!(mode,
|
||||
/// Channel mode: Defines the mode of operation of the UART.
|
||||
chmode, u8, ChannelMode, 8, 9);
|
||||
register_bits_typed!(mode,
|
||||
/// Number of stop bits
|
||||
nbstop, u8, StopBits, 6, 7);
|
||||
register_bits_typed!(mode,
|
||||
/// Parity type select
|
||||
par, u8, ParityMode, 3, 5);
|
||||
register_bits!(mode,
|
||||
/// Character length select
|
||||
chrl, u8, 1, 2);
|
||||
register_bit!(mode,
|
||||
/// Clock source select
|
||||
clks, 0);
|
||||
|
||||
register!(baud_rate_gen, BaudRateGen, RW, u32);
|
||||
register_bits!(baud_rate_gen, cd, u16, 0, 15);
|
||||
|
||||
register!(channel_sts, ChannelSts, RO, u32);
|
||||
/// Transmitter FIFO Nearly Full
|
||||
register_bit!(channel_sts, tnful, 14);
|
||||
/// Tx FIFO fill level is greater than or equal to TTRIG?
|
||||
register_bit!(channel_sts, ttrig, 13);
|
||||
/// Rx FIFO fill level is greater than or equal to FDEL?
|
||||
register_bit!(channel_sts, flowdel, 12);
|
||||
/// Transmitter state machine active?
|
||||
register_bit!(channel_sts, tactive, 11);
|
||||
/// Receiver state machine active?
|
||||
register_bit!(channel_sts, ractive, 10);
|
||||
/// Tx FIFO is full?
|
||||
register_bit!(channel_sts, txfull, 4);
|
||||
/// Tx FIFO is empty?
|
||||
register_bit!(channel_sts, txempty, 3);
|
||||
/// Rx FIFO is full?
|
||||
register_bit!(channel_sts, rxfull, 2);
|
||||
/// Rx FIFO is empty?
|
||||
register_bit!(channel_sts, rxempty, 1);
|
||||
/// Rx FIFO fill level is greater than or equal to RTRIG?
|
||||
register_bit!(channel_sts, rxovr, 0);
|
||||
register_bit!(channel_sts,
|
||||
/// Transmitter FIFO Nearly Full
|
||||
tnful, 14);
|
||||
register_bit!(channel_sts,
|
||||
/// Tx FIFO fill level is greater than or equal to TTRIG?
|
||||
ttrig, 13);
|
||||
register_bit!(channel_sts,
|
||||
/// Rx FIFO fill level is greater than or equal to FDEL?
|
||||
flowdel, 12);
|
||||
register_bit!(channel_sts,
|
||||
/// Transmitter state machine active?
|
||||
tactive, 11);
|
||||
register_bit!(channel_sts,
|
||||
/// Receiver state machine active?
|
||||
ractive, 10);
|
||||
register_bit!(channel_sts,
|
||||
/// Tx FIFO is full?
|
||||
txfull, 4);
|
||||
register_bit!(channel_sts,
|
||||
/// Tx FIFO is empty?
|
||||
txempty, 3);
|
||||
register_bit!(channel_sts,
|
||||
/// Rx FIFO is full?
|
||||
rxfull, 2);
|
||||
register_bit!(channel_sts,
|
||||
/// Rx FIFO is empty?
|
||||
rxempty, 1);
|
||||
register_bit!(channel_sts,
|
||||
/// Rx FIFO fill level is greater than or equal to RTRIG?
|
||||
rxovr, 0);
|
||||
|
||||
register!(tx_rx_fifo, TxRxFifo, RW, u32);
|
||||
register_bits!(tx_rx_fifo, data, u32, 0, 31);
|
||||
|
|
|
|||
Loading…
Reference in New Issue