Commit Graph

Select branches

Hide Pull Requests

63-fix-pid-error

69-fan_pwm

71-update-nixos22_11

72-warning-on-zeroed-limits

GUI

gui-paramtree

master

softspi

zotino-tec

Mono Color

• 2e9d22cf47 README: doc Astro 2020-10-11 21:08:02 +0200
• a332b5fcdc main: fix saving new_ipv4_address Astro 2020-10-11 01:58:28 +0200
• 83a266852a pid: move ki coefficient inside integration Astro 2020-10-11 01:56:22 +0200
• f12214a4df README: doc usb Astro 2020-10-10 20:50:57 +0200
• 175b88d0e6 s/tecpak/thermostat/g Astro 2020-10-10 20:45:44 +0200
• 9e23b14ace update cargosha256 Sebastien Bourdeauducq 2020-10-08 14:43:10 +0800
• 6fd5328042 channels: rm debug output Astro 2020-10-01 02:09:43 +0200
• 59103cb2a1 add support for ipv4 address reconfiguration Astro 2020-10-01 01:34:46 +0200
• 5acebbef9f pytec: doc set_param Astro 2020-10-01 00:34:59 +0200
• 12e713dc19 init_log: bump max level to Debug for USB Astro 2020-10-01 00:34:28 +0200
• 1b4a030e7e pytec: more methods, doc Astro 2020-10-01 00:21:43 +0200
• 438da74721 main: remove all plain-text responses Astro 2020-09-30 23:53:13 +0200
• 026dd1ed9c main: close tx half of sockets with closed rx half Astro 2020-09-30 23:35:51 +0200
• d4e7036fab session: rename SessionOutput to SessionInput Astro 2020-09-30 23:35:11 +0200
• bfdb64ffd6 pytec: add configuration getters Astro 2020-09-30 23:13:11 +0200
• 6e0cf26d6a export postfilter + s-h as json Astro 2020-09-30 22:53:21 +0200
• d4901cbab1 channels: add dac_value to Report Astro 2020-09-30 22:52:30 +0200
• 62d89a68a1 pwm: export summary as json Astro 2020-09-30 22:10:42 +0200
• 5521563c91 pid: export summary as json Astro 2020-09-30 20:06:47 +0200
• 11f2ebe961 channels: DRY get_center(), update vref if used Astro 2020-09-30 19:14:15 +0200
• 4b75c6147d pytec plot: update legend, rm debug add pid_output Astro 2020-09-30 19:13:50 +0200
• 445cde6ae8 channels: add test report_to_json Astro 2020-09-30 18:00:37 +0200
• 6951489545 channels: add pid_output to Report Astro 2020-09-30 18:00:16 +0200
• 97490e5e1b pytec: init Astro 2020-09-29 02:52:46 +0200
• 87287e83b3 update cargoSha256 Astro 2020-09-28 13:16:54 +0200
• 407c0998af ad7172: set output data rate to 10 Hz Astro 2020-09-28 01:24:32 +0200
• 9e5a58cafd main: switch reports to json serialization Astro 2020-09-27 23:58:03 +0200
• aea306cf17 config: save postfilter setting Astro 2020-09-26 01:40:01 +0200
• 97a09e422b main: add support for disabling postfilters Astro 2020-09-26 01:29:35 +0200
• 61d2cd6ecf channels: init i_set at centerpoint Astro 2020-09-25 22:56:23 +0200
• f3ec96f425 channels: fix doc Astro 2020-09-25 22:55:48 +0200
• 9f70ef2e0a main: power_down channels before sys_reset Astro 2020-09-25 22:24:43 +0200
• 83589610b5 implement reset command Astro 2020-09-25 00:14:29 +0200
• a2caac0fe5 channels: power_down TEC when thermistor is not connected to ADC Astro 2020-09-25 00:01:08 +0200
• 20059aff5c channel_state: recognize unplugged thermistor Astro 2020-09-24 23:33:16 +0200
• f690599f9e config: update tests Astro 2020-09-24 23:21:54 +0200
• b3e9a1b636 init_log: set USB_LOGGER max level Astro 2020-09-24 23:11:05 +0200
• bfbf037006 config: add load/save code Astro 2020-09-24 23:10:35 +0200
• a1ad9b2456 main: load config from eeprom on boot Astro 2020-09-24 23:08:42 +0200
• 8d70c03520 config: finalize load/save Astro 2020-09-24 23:04:29 +0200
• 3b050347d4 config: add test_encode_decode Astro 2020-09-24 21:35:15 +0200
• 254c1c3d73 remove now unneeded uom feature use_serde Astro 2020-09-24 21:33:16 +0200
• 5a293a0ada config: convert steinhart_hart::Parameters to SteinhartHartConfig for f32 storage Astro 2020-09-24 21:31:30 +0200
• daa398cb5e config: add pwm limits Astro 2020-09-24 21:10:27 +0200
• 17e89b2041 config: add test_fit_eeprom Astro 2020-09-24 20:59:04 +0200
• 58e648b5e0 pid::Parameters, CenterPoint: demote f32 fields to save config space Astro 2020-09-24 20:45:07 +0200
• c5c0ce5625 channels: rm debug output Astro 2020-09-24 18:55:03 +0200
• d3606d25b6 fix imports Sebastien Bourdeauducq 2020-09-24 15:49:13 +0800
• 27278db1ba update cargoSha256 Sebastien Bourdeauducq 2020-09-24 15:49:03 +0800
• d40a038c2f config: switch to postcard encoding Astro 2020-09-24 02:06:53 +0200
• 5d0d75d395 config: encode with serde_cbor Astro 2020-09-24 01:18:33 +0200
• 93f14523d7 command_parser: parse load/save Astro 2020-09-24 01:17:50 +0200
• 201701ee8b implement mac address generation with reading eui48 from i2c eeprom Astro 2020-09-24 00:16:40 +0200
• a84242fb1f implement setting i_set centerpoint Astro 2020-09-23 22:30:04 +0200
• b394cfa3d4 main: remove special handling for PwmPin::ISet Astro 2020-09-23 20:50:50 +0200
• b9902929a9 test: #[allow(unused)] Astro 2020-09-18 01:22:41 +0200
• edc675f5af command_parser: rename a test Astro 2020-09-18 01:16:19 +0200
• a4dde1b8ca delint Astro 2020-09-18 00:55:53 +0200
• 7361619a53 pid: update default parameters Astro 2020-09-18 00:41:32 +0200
• 34543c8660 pid: only reset after target change Astro 2020-09-18 00:24:00 +0200
• 83a209397e fix tests Astro 2020-09-18 00:23:30 +0200
• ba84295ec5 reconnect the pid controller Astro 2020-09-18 00:09:30 +0200
• fb81380955 fix tests Astro 2020-09-17 01:48:27 +0200
• 94e0525002 tec_u_meas: subtract vref offset Astro 2020-09-17 01:20:31 +0200
• 1157b73f7f max_i_pos/max_i_neg: remove vref from calculation Astro 2020-09-17 01:00:47 +0200
• dd06ae1075 main: improve output Astro 2020-09-16 23:32:48 +0200
• f76ee9a607 separate adc and max vref Astro 2020-09-16 23:31:49 +0200
• fc0ca8b581 calculate i_set current Astro 2020-09-16 22:22:48 +0200
• 8c80062da8 use proper units for pwm pins Astro 2020-09-16 22:05:31 +0200
• 7d45d5ad32 adc: complete temperature calculation Astro 2020-09-16 20:49:24 +0200
• dda1f2f0b4 use ThermodynamicTemperature Astro 2020-09-16 18:40:07 +0200
• b1b6d1ea94 fixes Astro 2020-09-14 00:12:28 +0200
• 1849e6f5e7 cargosha256.nix: update Astro 2020-09-13 23:24:44 +0200
• b80fcc430b channel_state: move adc_calibration into ChannelState Astro 2020-09-13 23:15:48 +0200
• bb26490153 unit: replace with uom Astro 2020-09-13 22:52:20 +0200
• 4a1ce342a0 pins: enable pwm pins Astro 2020-09-12 00:35:58 +0200
• 8cddbc5173 update cargosha256 Sebastien Bourdeauducq 2020-09-11 18:38:12 +0800
• 37a7898f92 cargosha256.nix: update Astro 2020-09-11 02:07:17 +0200
• 277f239ed7 cargosha256.nix: update Astro 2020-09-10 23:44:14 +0200
• 10208e1ac0 main: bump WATCHDOG_INTERVAL to 1s Astro 2020-09-10 23:28:00 +0200
• 42587810cd usb: add serial logger Astro 2020-09-10 23:17:31 +0200
• c11b71cc0d adc: don't calibrate but convert using ChannelCalibration Astro 2020-09-09 23:10:33 +0200
• 2617895460 update cargosha256 Astro 2020-09-06 22:59:12 +0200
• 5244077144 update dependencies Astro 2020-09-06 21:59:28 +0200
• 4e6aa5fe0c leds: init Astro 2020-09-06 21:10:10 +0200
• 9a912392be channels: fix dac calibration Astro 2020-09-06 19:08:09 +0200
• 50dcee0c8a pins: reuse definitions Astro 2020-09-06 19:06:59 +0200
• f76ae453a9 ad5680: cap value to MAX_VALUE Astro 2020-09-06 19:06:31 +0200
• e5c9ee8ed0 update cargosha256 Sebastien Bourdeauducq 2020-09-04 12:16:31 +0800
• a3df2bc685 update to newer stm32-eth Astro 2020-09-03 21:38:56 +0200
• 1711feae84 timer: define sleep() as pub Astro 2020-05-31 19:54:18 +0200
• f9b55508dd ad5680: keep sync high for 1ms Astro 2020-05-28 20:45:42 +0200
• cf03613ac5 main: fix peripheral params Astro 2020-05-28 20:43:34 +0200
• 3c94342448 replace tec_u_meas_adc with pins_adc Astro 2020-05-28 02:06:32 +0200
• 5418488a2f replace channel[01].adc with pins_adc Astro 2020-05-28 02:01:55 +0200
• f323c1be63 migrate ad5680 to softspi softspi Astro 2020-05-27 23:16:22 +0200
• ec6aa03dc3 set pwm values as ratio 0..1 Astro 2020-05-27 20:38:57 +0200
• 35af543e33 channels: fix/optimize calibrate_dac_value() Astro 2020-05-20 23:07:31 +0200
• cca0a77657 keep shdn high all the time Astro 2020-05-20 23:07:03 +0200
• d326517453 channels: remove unneccessary pub qualifiers Astro 2020-05-20 21:27:22 +0200