Commit Graph

228 Commits

Author SHA1 Message Date
d517dd75fe update dependencies 2020-10-30 15:03:57 +01:00
a943308203 pid: never reset 2020-10-13 23:55:22 +02:00
c005784df5 steinhart_hart: rm outdated doc 2020-10-11 23:20:56 +02:00
d574ccb5f4 pid: change signedness from heating to cooling 2020-10-11 23:12:18 +02:00
6ba1459a3c main: send error on invalid command 2020-10-11 23:11:27 +02:00
a332b5fcdc main: fix saving new_ipv4_address 2020-10-11 01:59:39 +02:00
83a266852a pid: move ki coefficient inside integration 2020-10-11 01:59:39 +02:00
175b88d0e6 s/tecpak/thermostat/g 2020-10-11 01:59:39 +02:00
6fd5328042 channels: rm debug output 2020-10-01 02:09:43 +02:00
59103cb2a1 add support for ipv4 address reconfiguration 2020-10-01 01:34:46 +02:00
12e713dc19 init_log: bump max level to Debug for USB 2020-10-01 00:34:28 +02:00
438da74721 main: remove all plain-text responses 2020-09-30 23:53:13 +02:00
026dd1ed9c main: close tx half of sockets with closed rx half
fixes Gitea issue #9
2020-09-30 23:39:31 +02:00
d4e7036fab session: rename SessionOutput to SessionInput 2020-09-30 23:35:11 +02:00
6e0cf26d6a export postfilter + s-h as json 2020-09-30 22:53:21 +02:00
d4901cbab1 channels: add dac_value to Report 2020-09-30 22:53:03 +02:00
62d89a68a1 pwm: export summary as json 2020-09-30 22:10:42 +02:00
5521563c91 pid: export summary as json 2020-09-30 20:06:47 +02:00
11f2ebe961 channels: DRY get_center(), update vref if used 2020-09-30 19:14:15 +02:00
4b75c6147d pytec plot: update legend, rm debug add pid_output 2020-09-30 19:13:50 +02:00
445cde6ae8 channels: add test report_to_json 2020-09-30 18:01:18 +02:00
6951489545 channels: add pid_output to Report 2020-09-30 18:00:16 +02:00
407c0998af ad7172: set output data rate to 10 Hz 2020-09-28 01:24:32 +02:00
9e5a58cafd main: switch reports to json serialization 2020-09-27 23:58:03 +02:00
aea306cf17 config: save postfilter setting 2020-09-26 01:40:01 +02:00
97a09e422b main: add support for disabling postfilters 2020-09-26 01:29:35 +02:00
61d2cd6ecf channels: init i_set at centerpoint 2020-09-25 22:56:23 +02:00
f3ec96f425 channels: fix doc 2020-09-25 22:55:48 +02:00
9f70ef2e0a main: power_down channels before sys_reset 2020-09-25 22:24:43 +02:00
83589610b5 implement reset command 2020-09-25 00:14:29 +02:00
a2caac0fe5 channels: power_down TEC when thermistor is not connected to ADC 2020-09-25 00:01:08 +02:00
20059aff5c channel_state: recognize unplugged thermistor 2020-09-24 23:34:09 +02:00
f690599f9e config: update tests 2020-09-24 23:21:54 +02:00
b3e9a1b636 init_log: set USB_LOGGER max level 2020-09-24 23:11:23 +02:00
bfbf037006 config: add load/save code 2020-09-24 23:10:47 +02:00
a1ad9b2456 main: load config from eeprom on boot 2020-09-24 23:08:42 +02:00
8d70c03520 config: finalize load/save 2020-09-24 23:04:29 +02:00
3b050347d4 config: add test_encode_decode 2020-09-24 21:35:15 +02:00
254c1c3d73 remove now unneeded uom feature use_serde 2020-09-24 21:33:42 +02:00
5a293a0ada config: convert steinhart_hart::Parameters to SteinhartHartConfig for f32 storage 2020-09-24 21:32:56 +02:00
daa398cb5e config: add pwm limits 2020-09-24 21:10:27 +02:00
17e89b2041 config: add test_fit_eeprom 2020-09-24 20:59:04 +02:00
58e648b5e0 pid::Parameters, CenterPoint: demote f32 fields to save config space 2020-09-24 20:47:02 +02:00
c5c0ce5625 channels: rm debug output 2020-09-24 19:49:11 +02:00
d3606d25b6 fix imports 2020-09-24 15:49:13 +08:00
d40a038c2f config: switch to postcard encoding 2020-09-24 02:06:53 +02:00
5d0d75d395 config: encode with serde_cbor 2020-09-24 01:18:33 +02:00
93f14523d7 command_parser: parse load/save 2020-09-24 01:17:50 +02:00
201701ee8b implement mac address generation with reading eui48 from i2c eeprom 2020-09-24 00:19:07 +02:00
a84242fb1f implement setting i_set centerpoint 2020-09-23 22:30:04 +02:00
b394cfa3d4 main: remove special handling for PwmPin::ISet 2020-09-23 20:50:50 +02:00
b9902929a9 test: #[allow(unused)] 2020-09-18 01:22:41 +02:00
edc675f5af command_parser: rename a test 2020-09-18 01:16:19 +02:00
a4dde1b8ca delint 2020-09-18 00:55:53 +02:00
7361619a53 pid: update default parameters 2020-09-18 00:41:32 +02:00
34543c8660 pid: only reset after target change 2020-09-18 00:24:00 +02:00
83a209397e fix tests 2020-09-18 00:23:30 +02:00
ba84295ec5 reconnect the pid controller 2020-09-18 00:09:30 +02:00
fb81380955 fix tests
run with `cargo test --target=x86_64-unknown-linux-gnu`
2020-09-17 01:48:27 +02:00
94e0525002 tec_u_meas: subtract vref offset 2020-09-17 01:20:47 +02:00
1157b73f7f max_i_pos/max_i_neg: remove vref from calculation
full duty pwm is at vref already
2020-09-17 01:03:57 +02:00
dd06ae1075 main: improve output 2020-09-16 23:32:48 +02:00
f76ee9a607 separate adc and max vref 2020-09-16 23:31:49 +02:00
fc0ca8b581 calculate i_set current 2020-09-16 22:22:48 +02:00
8c80062da8 use proper units for pwm pins 2020-09-16 22:06:15 +02:00
7d45d5ad32 adc: complete temperature calculation 2020-09-16 20:50:23 +02:00
dda1f2f0b4 use ThermodynamicTemperature 2020-09-16 18:40:07 +02:00
b1b6d1ea94 fixes 2020-09-14 00:12:28 +02:00
b80fcc430b channel_state: move adc_calibration into ChannelState 2020-09-13 23:15:48 +02:00
bb26490153 unit: replace with uom 2020-09-13 23:13:51 +02:00
4a1ce342a0 pins: enable pwm pins 2020-09-12 00:35:58 +02:00
10208e1ac0 main: bump WATCHDOG_INTERVAL to 1s
required for running Channels.calibrate_dac_value()
2020-09-10 23:28:00 +02:00
42587810cd usb: add serial logger 2020-09-10 23:17:31 +02:00
c11b71cc0d adc: don't calibrate but convert using ChannelCalibration 2020-09-09 23:10:33 +02:00
4e6aa5fe0c leds: init 2020-09-06 21:10:10 +02:00
9a912392be channels: fix dac calibration 2020-09-06 19:28:33 +02:00
50dcee0c8a pins: reuse definitions 2020-09-06 19:28:33 +02:00
f76ae453a9 ad5680: cap value to MAX_VALUE 2020-09-06 19:28:33 +02:00
a3df2bc685 update to newer stm32-eth 2020-09-03 21:38:56 +02:00
1711feae84 timer: define sleep() as pub 2020-05-31 19:54:18 +02:00
f9b55508dd ad5680: keep sync high for 1ms 2020-05-28 20:45:42 +02:00
cf03613ac5 main: fix peripheral params 2020-05-28 20:43:52 +02:00
3c94342448 replace tec_u_meas_adc with pins_adc 2020-05-28 02:06:32 +02:00
5418488a2f replace channel[01].adc with pins_adc 2020-05-28 02:01:55 +02:00
ec6aa03dc3 set pwm values as ratio 0..1 2020-05-27 20:38:57 +02:00
35af543e33 channels: fix/optimize calibrate_dac_value() 2020-05-20 23:09:24 +02:00
cca0a77657 keep shdn high all the time 2020-05-20 23:07:03 +02:00
d326517453 channels: remove unneccessary pub qualifiers 2020-05-20 21:27:22 +02:00
e6e150dac3 add Channels::calibrate_dac_value() 2020-05-19 00:15:39 +02:00
70127491f6 add vref_pin 2020-05-18 22:46:09 +02:00
3d6e1f18a6 add tec_u_meas 2020-05-18 21:38:13 +02:00
28a71d34d7 fix tec_i calculation 2020-05-18 21:23:07 +02:00
0bc0af7487 rename dac_loopback to dac_feedback 2020-05-17 02:18:25 +02:00
34c2da4484 ad7172: fix calibration 2020-05-17 02:11:53 +02:00
ba860e52ac control i_set dac in volts 2020-05-17 01:27:47 +02:00
38a220ce4e fix tec_i calculation, add units::{Amps, Ohms} 2020-05-17 00:54:37 +02:00
fb5c7a84e9 add units::Volts, use for stm32f4 adc 2020-05-17 00:13:52 +02:00
7f8dd62a36 add itec_pin 2020-05-16 23:59:31 +02:00
a317eb60fd rename ref_adc to dac_loopback 2020-05-16 19:36:00 +02:00
feae22b277 ad5680: idle low for powersaving 2020-05-16 01:18:14 +02:00