forked from M-Labs/zynq-rs
549 lines
16 KiB
Rust
549 lines
16 KiB
Rust
use core::fmt;
|
|
use libregister::{register, register_at, register_bit, register_bits, register_bits_typed};
|
|
use volatile_register::{RO, RW};
|
|
|
|
#[allow(unused)]
|
|
#[repr(C)]
|
|
pub struct RegisterBlock {
|
|
pub sdma_system_address: RW<u32>,
|
|
pub block_size_block_count: BlockSizeBlockCount,
|
|
pub argument: RW<u32>,
|
|
pub transfer_mode_command: TransferModeCommand,
|
|
pub responses: [RO<u32>; 4],
|
|
pub buffer: RW<u32>,
|
|
pub present_state: PresentState,
|
|
/// Host. power, block gap, wakeup control
|
|
pub control: Control,
|
|
/// Clock and timeout control, and software reset register.
|
|
pub clock_control: ClockControl,
|
|
pub interrupt_status: InterruptStatus,
|
|
pub interrupt_status_en: InterruptStatusEn,
|
|
pub interrupt_signal_en: InterruptSignalEn,
|
|
pub auto_cmd12_error_status: AutoCmd12ErrorStatus,
|
|
pub capabilities: Capabilities,
|
|
pub unused0: RO<u32>,
|
|
pub max_current_capabilities: MaxCurrentCapabilities,
|
|
pub unused1: RO<u32>,
|
|
pub force_event: ForceEvent,
|
|
pub adma_error_status: AdmaErrorStatus,
|
|
pub adma_system_address: RW<u32>,
|
|
pub unused2: RO<u32>,
|
|
pub boot_data_timeout_counter: RW<u32>,
|
|
pub debug_selection: DebugSelection,
|
|
pub unused3: [RO<u32>; 34],
|
|
pub spi_interrupt_support: SpiInterruptSupport,
|
|
pub unused4: [RO<u32>; 2],
|
|
pub misc_reg: MiscReg,
|
|
}
|
|
|
|
#[allow(unused)]
|
|
#[repr(u8)]
|
|
pub enum CommandType {
|
|
Normal = 0b00,
|
|
Suspend = 0b01,
|
|
Resume = 0b10,
|
|
Abort = 0b11,
|
|
}
|
|
|
|
#[allow(unused)]
|
|
#[repr(u8)]
|
|
pub enum ResponseTypeSelect {
|
|
NoResponse = 0b00,
|
|
Length136 = 0b01,
|
|
Length48 = 0b10,
|
|
Legnth48Check = 0b11,
|
|
}
|
|
|
|
#[allow(unused)]
|
|
#[repr(u8)]
|
|
#[derive(PartialEq, Debug)]
|
|
pub enum BusVoltage {
|
|
/// 3.3V
|
|
V33 = 0b111,
|
|
/// 3.0V, typ.
|
|
V30 = 0b110,
|
|
/// 1.8V, typ.
|
|
V18 = 0b101,
|
|
/// No power,
|
|
V0 = 0b000,
|
|
}
|
|
|
|
#[allow(unused)]
|
|
#[repr(u8)]
|
|
pub enum DmaSelect {
|
|
SDMA = 0b00,
|
|
ADMA1 = 0b01,
|
|
ADMA2_32 = 0b10,
|
|
ADMA2_64 = 0b11,
|
|
}
|
|
|
|
#[allow(unused)]
|
|
#[repr(u8)]
|
|
pub enum AdmaErrorState {
|
|
StStop = 0b00,
|
|
StFds = 0b01,
|
|
StTfr = 0b11,
|
|
}
|
|
|
|
#[allow(unused)]
|
|
#[repr(u8)]
|
|
#[derive(PartialEq)]
|
|
pub enum SpecificationVersion {
|
|
V1 = 0,
|
|
V2 = 1,
|
|
V3 = 2,
|
|
}
|
|
|
|
register_at!(RegisterBlock, 0xE0100000, sdio0);
|
|
register_at!(RegisterBlock, 0xE0101000, sdio1);
|
|
|
|
register!(block_size_block_count, BlockSizeBlockCount, RW, u32);
|
|
register_bits!(
|
|
block_size_block_count,
|
|
/// Current transfer block count.
|
|
blocks_count,
|
|
u16,
|
|
16,
|
|
31
|
|
);
|
|
register_bits!(
|
|
block_size_block_count,
|
|
/// Host SDMA Buffer Size, size = 2^(val + 2) KB.
|
|
dma_buffer_size,
|
|
u8,
|
|
12,
|
|
14
|
|
);
|
|
register_bits!(
|
|
block_size_block_count,
|
|
/// Block size for data transfer. Unit: byte.
|
|
transfer_block_size,
|
|
u16,
|
|
0,
|
|
11
|
|
);
|
|
|
|
register!(transfer_mode_command, TransferModeCommand, RW, u32);
|
|
register_bits!(
|
|
transfer_mode_command,
|
|
/// Command Number.
|
|
command_index,
|
|
u8,
|
|
24,
|
|
29
|
|
);
|
|
register_bits_typed!(
|
|
transfer_mode_command,
|
|
/// Command type register.
|
|
command_type,
|
|
u8,
|
|
CommandType,
|
|
22,
|
|
23
|
|
);
|
|
register_bit!(
|
|
transfer_mode_command,
|
|
/// 1 if data is present and shall be transferred using the DAT line.
|
|
data_present_select,
|
|
21
|
|
);
|
|
register_bit!(
|
|
transfer_mode_command,
|
|
/// If the index field shall be checked.
|
|
index_check_en,
|
|
20
|
|
);
|
|
register_bit!(
|
|
transfer_mode_command,
|
|
/// If CRC shall be checked.
|
|
crc_check_en,
|
|
19
|
|
);
|
|
register_bits_typed!(
|
|
transfer_mode_command,
|
|
/// Different type of response.
|
|
response_type_select,
|
|
u8,
|
|
ResponseTypeSelect,
|
|
16,
|
|
17
|
|
);
|
|
register_bit!(
|
|
transfer_mode_command,
|
|
/// Enables the multi block DAT line data transfer.
|
|
multi_block_en,
|
|
5
|
|
);
|
|
register_bit!(
|
|
transfer_mode_command,
|
|
/// 1 if read (card to host), 0 if write (host to card).
|
|
direction_select,
|
|
4
|
|
);
|
|
register_bit!(
|
|
transfer_mode_command,
|
|
/// If CMD12 shall be issued automatically when last block transfer is completed.
|
|
auto_cmd12_en,
|
|
2
|
|
);
|
|
register_bit!(
|
|
transfer_mode_command,
|
|
/// Enable the block count register.
|
|
block_count_en,
|
|
1
|
|
);
|
|
register_bit!(
|
|
transfer_mode_command,
|
|
/// Enable DMA,
|
|
dma_en,
|
|
0
|
|
);
|
|
|
|
register!(present_state, PresentState, RO, u32);
|
|
register_bit!(
|
|
present_state,
|
|
/// CMD Line Signal Level.
|
|
cmd_line_level,
|
|
24
|
|
);
|
|
register_bit!(
|
|
present_state,
|
|
/// Signal level in DAT[3]
|
|
dat3_level,
|
|
23
|
|
);
|
|
register_bit!(
|
|
present_state,
|
|
/// Signal level in DAT[2]
|
|
dat2_level,
|
|
22
|
|
);
|
|
register_bit!(
|
|
present_state,
|
|
/// Signal level in DAT[1]
|
|
dat1_level,
|
|
21
|
|
);
|
|
register_bit!(
|
|
present_state,
|
|
/// Signal level in DAT[0]
|
|
dat0_level,
|
|
20
|
|
);
|
|
register_bit!(
|
|
present_state,
|
|
/// Write enabled and inverse of SDx_WP pin level.
|
|
write_enabled,
|
|
19
|
|
);
|
|
register_bit!(
|
|
present_state,
|
|
/// Card detected and inverse of SDx_CDn pin level.
|
|
card_detected,
|
|
18
|
|
);
|
|
register_bit!(present_state, card_state_stable, 17);
|
|
register_bit!(present_state, card_inserted, 16);
|
|
register_bit!(present_state, buffer_read_en, 11);
|
|
register_bit!(present_state, buffer_write_en, 10);
|
|
register_bit!(present_state, read_transfer_active, 9);
|
|
register_bit!(present_state, write_transfer_active, 8);
|
|
register_bit!(present_state, dat_line_active, 2);
|
|
register_bit!(present_state, command_inhibit_dat, 1);
|
|
register_bit!(present_state, command_inhibit_cmd, 0);
|
|
|
|
register!(control, Control, RW, u32);
|
|
register_bit!(
|
|
control,
|
|
/// Enable wakeup event via SD card removal assertion.
|
|
wakeup_on_removal,
|
|
26
|
|
);
|
|
register_bit!(
|
|
control,
|
|
/// Enable wakeup event via SD card insertion assertion.
|
|
wakeup_on_insertion,
|
|
25
|
|
);
|
|
register_bit!(
|
|
control,
|
|
/// Enable wakeup event via card interrupt assertion.
|
|
wakeup_on_interrupt,
|
|
24
|
|
);
|
|
register_bit!(
|
|
control,
|
|
///Enable interrupt detection at the block gap for a multiple block transfer.
|
|
interrupt_at_block_gap,
|
|
19
|
|
);
|
|
register_bit!(
|
|
control,
|
|
/// Enable the use of the read wait protocol.
|
|
read_wait_control,
|
|
18
|
|
);
|
|
register_bit!(
|
|
control,
|
|
/// Restart a trasaction which was stopped using the stop at block gap request.
|
|
continue_req,
|
|
17
|
|
);
|
|
register_bit!(
|
|
control,
|
|
/// Stop executing a transaction at the next block gap.
|
|
stop_at_block_gap_req,
|
|
16
|
|
);
|
|
register_bits_typed!(control, bus_voltage, u8, BusVoltage, 9, 11);
|
|
register_bit!(control, bus_power, 8);
|
|
register_bit!(
|
|
control,
|
|
/// Selects source for card detection. 0 for SDCD#, 1 for card detect test level.
|
|
card_detect_signal,
|
|
7
|
|
);
|
|
register_bit!(
|
|
control,
|
|
/// Indicates card inserted or not. Enabled when card detect signal is 1.
|
|
card_detect_test_level,
|
|
6
|
|
);
|
|
register_bits_typed!(control, dma_select, u8, DmaSelect, 3, 4);
|
|
register_bit!(control, high_speed_en, 2);
|
|
register_bit!(
|
|
control,
|
|
/// Select the data width of the HC. 1 for 4-bit, 0 for 1-bit.
|
|
data_width_select,
|
|
1
|
|
);
|
|
register_bit!(
|
|
control,
|
|
/// 1 for LED on, 0 for LED off.
|
|
led_control,
|
|
0
|
|
);
|
|
|
|
register!(clock_control, ClockControl, RW, u32);
|
|
register_bit!(
|
|
clock_control,
|
|
/// Software reset for DAT line.
|
|
software_reset_dat,
|
|
26
|
|
);
|
|
register_bit!(
|
|
clock_control,
|
|
/// Software reset for CMD line.
|
|
software_reset_cmd,
|
|
25
|
|
);
|
|
register_bit!(
|
|
clock_control,
|
|
/// Software reset for ALL.
|
|
software_reset_all,
|
|
24
|
|
);
|
|
register_bits!(
|
|
clock_control,
|
|
/// Determines the interval by which DAT line time-outs are detected.
|
|
/// Interval = TMCLK * 2^(13 + val)
|
|
/// Note: 0b1111 is reserved.
|
|
timeout_counter_value,
|
|
u8,
|
|
16,
|
|
19
|
|
);
|
|
register_bits!(
|
|
clock_control,
|
|
/// Selects the frequency divisor, thus the clock frequency for SDCLK.
|
|
/// Choose the smallest possible divisor which results in a clock frequency
|
|
/// that is less than or equal to the target frequency.
|
|
sdclk_freq_divisor,
|
|
u8,
|
|
8,
|
|
15
|
|
);
|
|
register_bit!(clock_control, sd_clk_en, 2);
|
|
register_bit!(
|
|
clock_control,
|
|
/// 1 when SD clock is stable.
|
|
/// Note that this field is read-only.
|
|
internal_clk_stable,
|
|
1,
|
|
RO
|
|
);
|
|
register_bit!(clock_control, internal_clk_en, 0);
|
|
|
|
register!(interrupt_status, InterruptStatus, RW, u32, 1 << 15 | 1 << 8);
|
|
register_bit!(interrupt_status, ceata_error, 29, WTC);
|
|
register_bit!(interrupt_status, target_response_error, 28, WTC);
|
|
register_bit!(interrupt_status, adma_error, 25, WTC);
|
|
register_bit!(interrupt_status, auto_cmd12_error, 24, WTC);
|
|
register_bit!(interrupt_status, current_limit_error, 23, WTC);
|
|
register_bit!(interrupt_status, data_end_bit_error, 22, WTC);
|
|
register_bit!(interrupt_status, data_crc_error, 21, WTC);
|
|
register_bit!(interrupt_status, data_timeout_error, 20, WTC);
|
|
register_bit!(interrupt_status, command_index_error, 19, WTC);
|
|
register_bit!(interrupt_status, command_end_bit_error, 18, WTC);
|
|
register_bit!(interrupt_status, command_crc_error, 17, WTC);
|
|
register_bit!(interrupt_status, command_timeout_error, 16, WTC);
|
|
register_bit!(interrupt_status, error_interrupt, 15, RO);
|
|
register_bit!(interrupt_status, boot_terminate_interrupt, 10, WTC);
|
|
register_bit!(interrupt_status, boot_ack_rcv, 9, WTC);
|
|
register_bit!(interrupt_status, card_interrupt, 8, RO);
|
|
register_bit!(interrupt_status, card_removal, 7, WTC);
|
|
register_bit!(interrupt_status, card_insertion, 6, WTC);
|
|
register_bit!(interrupt_status, buffer_read_ready, 5, WTC);
|
|
register_bit!(interrupt_status, buffer_write_ready, 4, WTC);
|
|
register_bit!(interrupt_status, dma_interrupt, 3, WTC);
|
|
register_bit!(interrupt_status, block_gap_event, 2, WTC);
|
|
register_bit!(interrupt_status, transfer_complete, 1, WTC);
|
|
register_bit!(interrupt_status, command_complete, 0, WTC);
|
|
|
|
register!(interrupt_status_en, InterruptStatusEn, RW, u32);
|
|
register_bit!(interrupt_status_en, ceata_error_status_en, 29);
|
|
register_bit!(interrupt_status_en, target_response_error_status_en, 28);
|
|
register_bit!(interrupt_status_en, adma_error_status_en, 25);
|
|
register_bit!(interrupt_status_en, auto_cmd12_error_status_en, 24);
|
|
register_bit!(interrupt_status_en, current_limit_error_status_en, 23);
|
|
register_bit!(interrupt_status_en, data_end_bit_error_status_en, 22);
|
|
register_bit!(interrupt_status_en, data_crc_error_status_en, 21);
|
|
register_bit!(interrupt_status_en, data_timeout_error_status_en, 20);
|
|
register_bit!(interrupt_status_en, cmd_index_error_status_en, 19);
|
|
register_bit!(interrupt_status_en, cmd_end_bit_error_status_en, 18);
|
|
register_bit!(interrupt_status_en, cmd_crc_error_status_en, 17);
|
|
register_bit!(interrupt_status_en, cmd_timeout_error_status_en, 16);
|
|
register_bit!(interrupt_status_en, fixed_to_0, 15, RO);
|
|
register_bit!(interrupt_status_en, boot_terminate_interrupt_en, 10);
|
|
register_bit!(interrupt_status_en, boot_ack_rcv_en, 9);
|
|
register_bit!(interrupt_status_en, card_interrupt_status_en, 8);
|
|
register_bit!(interrupt_status_en, card_removal_status_en, 7);
|
|
register_bit!(interrupt_status_en, card_insertion_status_en, 6);
|
|
register_bit!(interrupt_status_en, buffer_read_ready_status_en, 5);
|
|
register_bit!(interrupt_status_en, buffer_write_ready_status_en, 4);
|
|
register_bit!(interrupt_status_en, dma_interrupt_status_en, 3);
|
|
register_bit!(interrupt_status_en, block_gap_evt_status_en, 2);
|
|
register_bit!(interrupt_status_en, transfer_complete_status_en, 1);
|
|
register_bit!(interrupt_status_en, cmd_complete_status_en, 0);
|
|
|
|
register!(interrupt_signal_en, InterruptSignalEn, RW, u32);
|
|
register_bit!(interrupt_signal_en, ceata_error_signal_en, 29);
|
|
register_bit!(interrupt_signal_en, target_response_error_signal_en, 28);
|
|
register_bit!(interrupt_signal_en, adma_error_signal_en, 25);
|
|
register_bit!(interrupt_signal_en, auto_cmd12_error_signal_en, 24);
|
|
register_bit!(interrupt_signal_en, current_limit_error_signal_en, 23);
|
|
register_bit!(interrupt_signal_en, data_end_bit_error_signal_en, 22);
|
|
register_bit!(interrupt_signal_en, data_crc_error_signal_en, 21);
|
|
register_bit!(interrupt_signal_en, data_timeout_error_signal_en, 20);
|
|
register_bit!(interrupt_signal_en, cmd_index_error_signal_en, 19);
|
|
register_bit!(interrupt_signal_en, cmd_end_bit_error_signal_en, 18);
|
|
register_bit!(interrupt_signal_en, cmd_crc_error_signal_en, 17);
|
|
register_bit!(interrupt_signal_en, cmd_timeout_error_signal_en, 16);
|
|
register_bit!(interrupt_signal_en, fixed_to_0, 15, RO);
|
|
register_bit!(interrupt_signal_en, boot_terminate_interrupt_signal_en, 10);
|
|
register_bit!(interrupt_signal_en, boot_ack_rcv_signal_en, 9);
|
|
register_bit!(interrupt_signal_en, card_interrupt_signal_en, 8);
|
|
register_bit!(interrupt_signal_en, card_removal_signal_en, 7);
|
|
register_bit!(interrupt_signal_en, card_insertion_signal_en, 6);
|
|
register_bit!(interrupt_signal_en, buffer_read_ready_signal_en, 5);
|
|
register_bit!(interrupt_signal_en, buffer_write_ready_signal_en, 4);
|
|
register_bit!(interrupt_signal_en, dma_interrupt_signal_en, 3);
|
|
register_bit!(interrupt_signal_en, block_gap_evt_signal_en, 2);
|
|
register_bit!(interrupt_signal_en, transfer_complete_signal_en, 1);
|
|
register_bit!(interrupt_signal_en, cmd_complete_signal_en, 0);
|
|
|
|
register!(auto_cmd12_error_status, AutoCmd12ErrorStatus, RO, u32);
|
|
register_bit!(
|
|
auto_cmd12_error_status,
|
|
cmd_not_issued_by_auto_cmd12_error,
|
|
7
|
|
);
|
|
register_bit!(auto_cmd12_error_status, index_error, 4);
|
|
register_bit!(auto_cmd12_error_status, end_bit_error, 3);
|
|
register_bit!(auto_cmd12_error_status, crc_error, 2);
|
|
register_bit!(auto_cmd12_error_status, timeout_error, 1);
|
|
register_bit!(auto_cmd12_error_status, not_executed, 0);
|
|
|
|
register!(capabilities, Capabilities, RO, u32);
|
|
register_bit!(capabilities, spi_block_mode, 30);
|
|
register_bit!(capabilities, spi_mode, 29);
|
|
register_bit!(capabilities, support_64bit, 28);
|
|
register_bit!(capabilities, interrupt_mode, 27);
|
|
register_bit!(capabilities, voltage_1_8, 26);
|
|
register_bit!(capabilities, voltage_3_0, 25);
|
|
register_bit!(capabilities, voltage_3_3, 24);
|
|
register_bit!(capabilities, suspend_resume, 23);
|
|
register_bit!(capabilities, sdma, 22);
|
|
register_bit!(capabilities, hgih_speed, 21);
|
|
register_bit!(capabilities, adma2, 19);
|
|
register_bit!(capabilities, extended_media_bus, 18);
|
|
register_bits!(
|
|
capabilities,
|
|
/// Length = 2^(9 + v) bytes.
|
|
max_block_len,
|
|
u8,
|
|
16,
|
|
17
|
|
);
|
|
register_bit!(capabilities, timeout_clock_unit, 7);
|
|
|
|
register!(max_current_capabilities, MaxCurrentCapabilities, RO, u32);
|
|
register_bits!(max_current_capabilities, max_current_1_8v, u8, 16, 23);
|
|
register_bits!(max_current_capabilities, max_current_3_0v, u8, 8, 15);
|
|
register_bits!(max_current_capabilities, max_current_3_3v, u8, 0, 7);
|
|
|
|
register!(force_event, ForceEvent, WO, u32);
|
|
register_bit!(force_event, ceata_error, 29);
|
|
register_bit!(force_event, target_response_error, 28);
|
|
register_bit!(force_event, adma_error, 25);
|
|
register_bit!(force_event, auto_cmd12_error, 24);
|
|
register_bit!(force_event, current_limit_error, 23);
|
|
register_bit!(force_event, data_end_bit_error, 22);
|
|
register_bit!(force_event, data_crc_error, 21);
|
|
register_bit!(force_event, data_timeout_error, 20);
|
|
register_bit!(force_event, cmd_index_error, 19);
|
|
register_bit!(force_event, cmd_end_bit_error, 18);
|
|
register_bit!(force_event, cmd_crc_error, 17);
|
|
register_bit!(force_event, cmd_timeout_error, 16);
|
|
register_bit!(force_event, cmd_not_issued_by_auto_cmd12_error, 7);
|
|
register_bit!(force_event, auto_cmd12_index_error, 4);
|
|
register_bit!(force_event, auto_cmd12_end_bit_error, 3);
|
|
register_bit!(force_event, auto_cmd12_crc_error, 2);
|
|
register_bit!(force_event, auto_cmd12_timeout_error, 1);
|
|
register_bit!(force_event, auto_cmd12_not_executed, 0);
|
|
|
|
register!(adma_error_status, AdmaErrorStatus, RW, u32, 0b11);
|
|
register_bit!(adma_error_status, length_mismatch_error, 2, WTC);
|
|
register_bits_typed!(adma_error_status, error_state, u8, AdmaErrorState, 0, 1);
|
|
|
|
register!(debug_selection, DebugSelection, WO, u32);
|
|
register_bit!(debug_selection, debug_select, 0);
|
|
|
|
register!(spi_interrupt_support, SpiInterruptSupport, RW, u32);
|
|
register_bits!(
|
|
spi_interrupt_support,
|
|
/// There should be a problem with the documentation of this field.
|
|
spi_int_support,
|
|
u8,
|
|
0,
|
|
7
|
|
);
|
|
|
|
register!(misc_reg, MiscReg, RO, u32);
|
|
register_bits!(misc_reg, vendor_version_num, u8, 24, 31);
|
|
register_bits_typed!(misc_reg, spec_ver, u8, SpecificationVersion, 16, 23);
|
|
register_bits!(
|
|
misc_reg,
|
|
/// Logical OR of interrupt signal and wakeup signal for each slot.
|
|
slot_interrupt_signal,
|
|
u8,
|
|
0,
|
|
7
|
|
);
|
|
|
|
impl fmt::Debug for interrupt_status::Read {
|
|
fn fmt(&self, fmt: &mut fmt::Formatter) -> fmt::Result {
|
|
fmt.write_fmt(format_args!("status: {:0X}", self.inner))
|
|
}
|
|
}
|