MQTT-controlled 4-channel DDS signal generator using Urukul, Humpback and STM32 NUCLEO

Go to file

occheung 52b285742e migen: use extension		2020-09-17 09:55:20 +08:00
.cargo	scpi: add switch ctrl command	2020-09-03 17:41:27 +08:00
examples	fpga config: use include_bytes	2020-09-16 17:46:58 +08:00
gdb_config	scpi: adopt rust standard on result/option handling	2020-09-14 15:36:03 +08:00
migen	migen: use extension	2020-09-17 09:55:20 +08:00
nix	nmigen: purgred nmigen nix config	2020-08-12 12:45:19 +08:00
openocd	openocd: add flash command	2020-09-16 17:46:13 +08:00
src	dds: allow single tone iterative setup	2020-09-16 14:23:01 +08:00
.gitignore	cargo.lock: commit	2020-09-16 17:45:14 +08:00
Cargo.lock	cargo.lock: commit	2020-09-16 17:45:14 +08:00
Cargo.toml	dds: more clk ctrl; scpi: sys_clk ctrl	2020-09-16 12:05:45 +08:00
memory.x	scpi: introduce master clock setup	2020-09-07 14:07:39 +08:00
README.md	README: update	2020-09-16 15:24:27 +08:00
shell.nix	rm migen edit	2020-09-16 17:45:41 +08:00

Humpback DDS

RF signal generator using Urukul, Humpback and STM32 NUCLEO-H743ZI2

Nix commands

Open nix shell before anything.

nix-shell

Start OpenOCD server in unblocking mode.

run-openocd

Start OpenOCD server in blocking mode, for console print through semihosting.

run-openocd-block

Reset STM32 flash before flashing bitstream for Humpback FPGA.

reset-flash

Load bitstream to Humpback FPGA.

configure-fpga

Verify a proper bitstream is loaded to STM32 flash.

verify-fpga-config

Run a Ethernet server with TCP socket examples.

run-ethernet-server

Select a different gdb config file from gdb_config directory.

set-gdb-config-file <filename>

Leave as blank for default openocd.gdb configuration.