itm: enable itm logging

examples/tcp_client.rs

@@ -30,6 +30,7 @@ use cortex_m_rt::{
 // use cortex_m_semihosting::hprintln;
 
 // use panic_halt as _;
+use panic_itm as _;
 
 use rtic::cyccnt::{Instant, U32Ext};
 
@@ -83,14 +84,20 @@ fn main() -> ! {
     let ccdr = rcc
                 .use_hse(8.mhz())
                 .sysclk(400.mhz())
-                // .hclk(200.mhz())
-                // .per_ck(100.mhz())
+                .hclk(200.mhz())
+                .per_ck(100.mhz())
                 .pll1_q_ck(48.mhz())    // for SPI
-                // .pll1_r_ck(400.mhz())   // for TRACECK
-                // .pll2_p_ck(100.mhz())
-                // .pll2_q_ck(100.mhz())
+                .pll1_r_ck(400.mhz())   // for TRACECK
+                .pll2_p_ck(100.mhz())
+                .pll2_q_ck(100.mhz())
                 .freeze(vos, &dp.SYSCFG);
 
+    // info!("{}", ccdr.clocks.c_ck().0);
+    
+    unsafe {
+        logger::enable_itm(&dp.DBGMCU, &mut cp.DCB, &mut cp.ITM);
+    }
+
     let mut delay = cp.SYST.delay(ccdr.clocks);
 
     let gpioa = dp.GPIOA.split(ccdr.peripheral.GPIOA);
@@ -108,6 +115,10 @@ fn main() -> ! {
     let mut green_led = gpiob.pb0.into_push_pull_output();
     green_led.set_low().unwrap();
 
+    gpiob.pb3.into_alternate_af0().set_speed(Speed::VeryHigh);
+
+    logger::init();
+
     // Configure ethernet IO
     {
         let _rmii_refclk = gpioa.pa1.into_alternate_af11().set_speed(Speed::VeryHigh);
@@ -254,9 +265,10 @@ fn main() -> ! {
         }
 
         match net_interface.poll_delay(&sockets, clock.elapsed()) {
-            Some(net::time::Duration {millis :0}) => debug!("resuming"),
+            Some(net::time::Duration {millis :0}) => {
+                continue;
+            }
             Some(time_delay) => {
-                info!("sleeping for {} ms", time_delay);
                 // green_led.set_low().unwrap();
                 // delay.delay_ms(time_delay.total_millis() as u32);
                 // green_led.set_high().unwrap();

examples/util/logger.rs

@@ -26,7 +26,7 @@ pub unsafe fn enable_itm(
     *(0x5c00_4fb0 as *mut u32) = 0xC5ACCE55;
 
     // SWO CODR Register: Set SWO speed
-    *(0x5c00_3010 as *mut _) = 400 - 1;
+    *(0x5c00_3010 as *mut _) = 200;
 
     // SWO SPPR Register:
     // 1 = Manchester
@@ -64,7 +64,7 @@ use cortex_m_log::{
 
 lazy_static! {
     static ref LOGGER: Logger<ItmSync<InterruptFree>> = Logger {
-        level: LevelFilter::Debug,
+        level: LevelFilter::Trace,
         inner: unsafe {
             InterruptSync::new(
                 ItmDest::new(cortex_m::Peripherals::steal().ITM)
@@ -77,7 +77,7 @@ pub fn init() {
     cortex_m_log::log::init(&LOGGER).unwrap();
 }
 
-use panic_semihosting as _;
+// use panic_semihosting as _;
 
 use cortex_m_log::printer::semihosting;
 use cortex_m_log::printer::semihosting::Semihosting;

gdb_config/debug.gdb

@@ -12,7 +12,9 @@ break HardFault
 break rust_begin_unwind
 
 # print using semihosting, slow af
-monitor arm semihosting enable
+# monitor arm semihosting enable
+monitor tpiu config internal itm.fifo uart off 400000000
+monitor itm port 0 on
 
 # flash the program to STM32
 load

gdb_config/openocd.gdb

@@ -12,9 +12,9 @@ break HardFault
 break rust_begin_unwind
 
 # print using semihosting, slow af
-monitor arm semihosting enable
-# monitor tpiu config internal itm.fifo uart off 400000000
-# monitor itm port 0 on
+# monitor arm semihosting enable
+monitor tpiu config internal itm.fifo uart off 400000000
+monitor itm port 0 on
 
 # flash the program to STM32
 load