migen: replace ethernet conflict pin

.cargo/config

@@ -1,5 +1,5 @@
 [target.thumbv7em-none-eabihf]
-runner = "gdb -q -x gdb_config/fpga_config.gdb"
+runner = "gdb -q -x gdb_config/debug.gdb"
 rustflags = [
   "-C", "link-arg=-Tlink.x",
 ]

migen/humpback.py

@@ -33,10 +33,10 @@ _io.append(
 
 # Resource: DDS I/O_Update
 '''
-	io_update -> PB13 : B12
+	io_update -> PB15 : A11
 '''
 _io.append(
-	("io_update", 0, Pins("B12"), IOStandard("LVCMOS33"))
+	("io_update", 0, Pins("A11"), IOStandard("LVCMOS33"))
 )
 
 # Inherit Platform to gain the programmed clock attribute

src/main.rs

@@ -73,9 +73,7 @@ fn main() -> ! {
 	let sclk = gpioa.pa5.into_alternate_af5();
 	let mosi = gpiob.pb5.into_alternate_af5();
 	let miso = gpioa.pa6.into_alternate_af5();
-//	let mut sclk = gpioa.pa5.into_push_pull_output();
+
-//	let mut mosi = gpiob.pb5.into_push_pull_output();
-//	let mut miso = gpioa.pa6.into_pull_up_input();
 
 	let (mut cs0, mut cs1, mut cs2) = (
 		gpiob.pb12.into_push_pull_output(),
@@ -83,6 +81,11 @@ fn main() -> ! {
 		gpioc.pc7.into_push_pull_output(),
 	);
 
+	/*
+	 *	I/O_Update -> PB13
+	 */
+	let mut io_update = gpiob.pb15.into_push_pull_output();
+
 	let mut spi = dp.SPI1.spi(
 		(sclk, miso, mosi),
 		spi::MODE_0,
@@ -94,13 +97,15 @@ fn main() -> ! {
 	// debug led
 	let mut yellow = gpioe.pe1.into_push_pull_output();
 	yellow.set_high().unwrap();
-
+	
+/*
 	let mut switch = CPLD::new(spi, (cs0, cs1, cs2));
 	let parts = switch.split();
 
 	let mut config = ConfigRegister::new(parts.spi1);
 	let mut att = Attenuator::new(parts.spi2);
 	let mut dds0 = DDS::new(parts.spi4);
+
 	loop {
 		let mut counter = config.get_status(StatusMask::RF_SW).unwrap();
 		hprintln!("{}", counter);
@@ -108,36 +113,55 @@ fn main() -> ! {
 			(CFGMask::RF_SW, ((counter + 1)%16) as u32)
 		]).unwrap();
 	}
+*/
 
-/*
 	cs0.set_low().unwrap();
 	cs1.set_low().unwrap();
 	cs2.set_low().unwrap();
 
-	cs2.set_high().unwrap();
+	io_update.set_low().unwrap();
-	let mut arr: [u8; 5] = [0x00, 0x00, 0x00, 0x00, 0x02];
-	hprintln!("Feedback of conf: {:?}", spi.transfer(&mut arr).unwrap()).unwrap();
-	cs2.set_low().unwrap();
 
-	arr[0] = 0x80;
+	let mut dummy :[u8;1] = [0];
-	arr[1] = 0;
+	spi.transfer(&mut dummy);
-	arr[2] = 0;
+
-	arr[3] = 0;
+	// Master reset DDS_0 through CPLD, with LED at 3
-	arr[4] = 0;		
+	cs0.set_high().unwrap();
-	cs1.set_high().unwrap();
+	spi.transfer(&mut [
-	hprintln!("first proper feedback: {:?}", spi.transfer(&mut arr).unwrap()).unwrap();
+		0x08, 0x00, 0x03
+	]).unwrap();
+	cs0.set_low().unwrap();
+
+	// Perform I/O Reset through CPLD, with LED at 4
+	cs0.set_high().unwrap();
+	spi.transfer(&mut [
+		0x10, 0x00, 0x04
+	]).unwrap();
+	cs0.set_low().unwrap();
+
+	// Release reset, control I/O Update through EEM
+	cs0.set_high().unwrap();
+	spi.transfer(&mut [
+		0x00, 0x00, 0x0A
+	]).unwrap();
+	cs0.set_low().unwrap();
+
+	cs0.set_low().unwrap();
 	cs1.set_low().unwrap();
+	cs2.set_high().unwrap();
+	
+	hprintln!("{:?}", spi.transfer(&mut [
+		0x00, 0x00, 0x00, 0x00, 0x02
+	]).unwrap()).unwrap();
 
-	loop {
+	io_update.set_high().unwrap();
-		arr[0] = 0x81;
+	delay.delay_ms(1_u16);
-		arr[1] = 0;
+	io_update.set_low().unwrap();
-		arr[2] = 0;
+
-		arr[3] = 0;
+	hprintln!("{:?}", spi.transfer(&mut [
-		arr[4] = 0;
+		0x80, 0x00, 0x00, 0x00, 0x00
-		cs1.set_high().unwrap();
+	]).unwrap()).unwrap();
-		hprintln!("{:?}", spi.transfer(&mut arr).unwrap()).unwrap();
+	
-		cs1.set_low().unwrap();
+
-	}
+	loop {}
-*/
 }