forked from M-Labs/humpback-dds
tcp_client: rm print
This commit is contained in:
parent
79ce44552b
commit
4c88c31aca
|
|
@ -1,195 +1,182 @@
|
|||
#![no_std]
|
||||
#![no_main]
|
||||
#![no_std]
|
||||
|
||||
use smoltcp as net;
|
||||
use stm32h7_ethernet as ethernet;
|
||||
use stm32h7xx_hal::{gpio::Speed, prelude::*, spi, pac};
|
||||
use embedded_hal::{blocking::spi::Transfer};
|
||||
use core::sync::atomic::{AtomicU32, Ordering};
|
||||
|
||||
use heapless::{consts, String};
|
||||
// extern crate cortex_m;
|
||||
use panic_semihosting as _;
|
||||
|
||||
use cortex_m;
|
||||
use cortex_m::asm::nop;
|
||||
use cortex_m_rt::{
|
||||
entry,
|
||||
exception,
|
||||
};
|
||||
use cortex_m_semihosting::hprintln;
|
||||
|
||||
use panic_halt as _;
|
||||
extern crate smoltcp;
|
||||
|
||||
use rtic::cyccnt::{Instant, U32Ext};
|
||||
// Ethernet crate for STM32H7 has been merged into HAL in the latest commit
|
||||
extern crate stm32h7_ethernet as ethernet;
|
||||
|
||||
use minimq::{
|
||||
embedded_nal::{IpAddr, Ipv4Addr},
|
||||
MqttClient, QoS,
|
||||
use stm32h7xx_hal::gpio::Speed;
|
||||
use stm32h7xx_hal::hal::digital::v2::{
|
||||
OutputPin,
|
||||
InputPin,
|
||||
};
|
||||
use stm32h7xx_hal::rcc::CoreClocks;
|
||||
use stm32h7xx_hal::{pac, prelude::*, spi, stm32, stm32::interrupt};
|
||||
use Speed::*;
|
||||
|
||||
use firmware::nal_tcp_client::{NetworkStack, NetStorage, NetworkInterface};
|
||||
use firmware::{Urukul};
|
||||
use firmware::cpld::{CPLD};
|
||||
use libm::round;
|
||||
|
||||
static mut NET_STORE: NetStorage = NetStorage {
|
||||
// Placeholder for the real IP address, which is initialized at runtime.
|
||||
ip_addrs: [net::wire::IpCidr::Ipv6(
|
||||
net::wire::Ipv6Cidr::SOLICITED_NODE_PREFIX,
|
||||
)],
|
||||
neighbor_cache: [None; 8],
|
||||
use core::{
|
||||
str,
|
||||
fmt::Write
|
||||
};
|
||||
use core::mem::uninitialized;
|
||||
|
||||
use smoltcp::wire::{EthernetAddress, IpAddress, IpCidr, Ipv4Address};
|
||||
use smoltcp::iface::{NeighborCache, EthernetInterfaceBuilder, Routes};
|
||||
use smoltcp::socket::SocketSet;
|
||||
use smoltcp::socket::{SocketHandle, TcpSocket, TcpSocketBuffer};
|
||||
use smoltcp::time::{Duration, Instant};
|
||||
|
||||
use embedded_nal::TcpStack;
|
||||
|
||||
use firmware;
|
||||
use firmware::{
|
||||
attenuator::Attenuator,
|
||||
config_register::{
|
||||
ConfigRegister,
|
||||
CFGMask,
|
||||
StatusMask,
|
||||
},
|
||||
dds::{
|
||||
DDS,
|
||||
DDSCFRMask,
|
||||
},
|
||||
cpld::{
|
||||
CPLD,
|
||||
},
|
||||
Urukul,
|
||||
};
|
||||
use scpi::prelude::*;
|
||||
|
||||
/// Configure SYSTICK for 1ms timebase
|
||||
fn systick_init(syst: &mut stm32::SYST, clocks: CoreClocks) {
|
||||
let c_ck_mhz = clocks.c_ck().0 / 1_000_000;
|
||||
|
||||
let syst_calib = 0x3E8;
|
||||
|
||||
syst.set_clock_source(cortex_m::peripheral::syst::SystClkSource::Core);
|
||||
syst.set_reload((syst_calib * c_ck_mhz) - 1);
|
||||
syst.enable_interrupt();
|
||||
syst.enable_counter();
|
||||
}
|
||||
|
||||
/// ======================================================================
|
||||
/// Entry point
|
||||
/// ======================================================================
|
||||
|
||||
/// TIME is an atomic u32 that counts milliseconds. Although not used
|
||||
/// here, it is very useful to have for network protocols
|
||||
static TIME: AtomicU32 = AtomicU32::new(0);
|
||||
|
||||
/// Locally administered MAC address
|
||||
const MAC_ADDRESS: [u8; 6] = [0x02, 0x00, 0x11, 0x22, 0x33, 0x44];
|
||||
|
||||
/// Ethernet descriptor rings are a global singleton
|
||||
#[link_section = ".sram3.eth"]
|
||||
static mut DES_RING: ethernet::DesRing = ethernet::DesRing::new();
|
||||
|
||||
macro_rules! add_socket {
|
||||
($sockets:ident, $tx_storage:ident, $rx_storage:ident) => {
|
||||
let mut $rx_storage = [0; 4096];
|
||||
let mut $tx_storage = [0; 4096];
|
||||
// Theoratical maximum number of socket that can be handled
|
||||
const SOCKET_COUNT: usize = 2;
|
||||
|
||||
let tcp_socket = {
|
||||
let tx_buffer = net::socket::TcpSocketBuffer::new(&mut $tx_storage[..]);
|
||||
let rx_buffer = net::socket::TcpSocketBuffer::new(&mut $rx_storage[..]);
|
||||
|
||||
net::socket::TcpSocket::new(tx_buffer, rx_buffer)
|
||||
};
|
||||
|
||||
let _handle = $sockets.add(tcp_socket);
|
||||
};
|
||||
}
|
||||
|
||||
pub type UrukulType = Urukul<
|
||||
firmware::spi_slave::SPISlave<
|
||||
'static,
|
||||
firmware::cpld::CPLD<
|
||||
stm32h7xx_hal::spi::Spi<stm32h7xx_hal::device::SPI1>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB12<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioa::PA15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioc::PC7<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>
|
||||
>,
|
||||
stm32h7xx_hal::spi::Spi<stm32h7xx_hal::device::SPI1>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB12<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioa::PA15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioc::PC7<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>
|
||||
>
|
||||
>;
|
||||
|
||||
pub type CPLDType = CPLD<
|
||||
stm32h7xx_hal::spi::Spi<stm32h7xx_hal::device::SPI1>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB12<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioa::PA15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioc::PC7<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>
|
||||
>;
|
||||
|
||||
pub type IoUpdateType = stm32h7xx_hal::gpio::gpiob::PB15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>;
|
||||
pub type SpiType = stm32h7xx_hal::spi::Spi<stm32h7xx_hal::device::SPI1, u8>;
|
||||
pub type PartsType = firmware::spi_slave::Parts<
|
||||
'static,
|
||||
firmware::cpld::CPLD<
|
||||
stm32h7xx_hal::spi::Spi<stm32h7xx_hal::device::SPI1>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB12<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioa::PA15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioc::PC7<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>
|
||||
>,
|
||||
stm32h7xx_hal::spi::Spi<stm32h7xx_hal::device::SPI1>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB12<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioa::PA15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpioc::PC7<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>,
|
||||
stm32h7xx_hal::gpio::gpiob::PB15<stm32h7xx_hal::gpio::Output<stm32h7xx_hal::gpio::PushPull>>
|
||||
>;
|
||||
// Give buffer sizes of transmitting and receiving TCP packets
|
||||
const BUFFER_SIZE: usize = 2048;
|
||||
|
||||
// the program entry point
|
||||
#[entry]
|
||||
fn main() -> ! {
|
||||
|
||||
let mut cp = cortex_m::Peripherals::take().unwrap();
|
||||
let dp = pac::Peripherals::take().unwrap();
|
||||
|
||||
cp.DWT.enable_cycle_counter();
|
||||
|
||||
// Enable SRAM3 for the descriptor ring.
|
||||
dp.RCC.ahb2enr.modify(|_, w| w.sram3en().set_bit());
|
||||
|
||||
let rcc = dp.RCC.constrain();
|
||||
// Initialise power...
|
||||
let pwr = dp.PWR.constrain();
|
||||
let vos = pwr.freeze();
|
||||
|
||||
let ccdr = rcc
|
||||
.sysclk(400.mhz())
|
||||
.hclk(200.mhz())
|
||||
.per_ck(100.mhz())
|
||||
.pll1_q_ck(48.mhz()) // for SPI
|
||||
.pll2_p_ck(100.mhz())
|
||||
.pll2_q_ck(100.mhz())
|
||||
.freeze(vos, &dp.SYSCFG);
|
||||
// Initialise SRAM3
|
||||
dp.RCC.ahb2enr.modify(|_, w| w.sram3en().set_bit());
|
||||
|
||||
// Initialise clocks...
|
||||
let rcc = dp.RCC.constrain();
|
||||
let ccdr = rcc
|
||||
.sys_ck(200.mhz())
|
||||
.hclk(200.mhz())
|
||||
.pll1_r_ck(100.mhz()) // for TRACECK
|
||||
.pll1_q_ck(48.mhz()) // for SPI
|
||||
.freeze(vos, &dp.SYSCFG);
|
||||
|
||||
// Get the delay provider.
|
||||
let delay = cp.SYST.delay(ccdr.clocks);
|
||||
|
||||
// Initialise system...
|
||||
cp.SCB.invalidate_icache();
|
||||
cp.SCB.enable_icache();
|
||||
// TODO: ETH DMA coherence issues
|
||||
// cp.SCB.enable_dcache(&mut cp.CPUID);
|
||||
cp.DWT.enable_cycle_counter();
|
||||
|
||||
// Initialise IO...
|
||||
let gpioa = dp.GPIOA.split(ccdr.peripheral.GPIOA);
|
||||
let gpiob = dp.GPIOB.split(ccdr.peripheral.GPIOB);
|
||||
let gpioc = dp.GPIOC.split(ccdr.peripheral.GPIOC);
|
||||
let gpiod = dp.GPIOD.split(ccdr.peripheral.GPIOD);
|
||||
let gpioe = dp.GPIOE.split(ccdr.peripheral.GPIOE);
|
||||
let gpiof = dp.GPIOF.split(ccdr.peripheral.GPIOF);
|
||||
let gpiod = dp.GPIOD.split(ccdr.peripheral.GPIOD);
|
||||
let gpioe = dp.GPIOE.split(ccdr.peripheral.GPIOE);
|
||||
let gpiof = dp.GPIOF.split(ccdr.peripheral.GPIOF);
|
||||
let gpiog = dp.GPIOG.split(ccdr.peripheral.GPIOG);
|
||||
// let mut link_led = gpiob.pb0.into_push_pull_output(); // LED1, green
|
||||
// let mut status_led = gpioe.pe1.into_push_pull_output(); // LD2, yellow
|
||||
// let mut listen_led = gpiob.pb14.into_push_pull_output(); // LD3, red
|
||||
// link_led.set_low().ok();
|
||||
// status_led.set_low().ok();
|
||||
// listen_led.set_low().ok();
|
||||
|
||||
// Configure ethernet IO
|
||||
{
|
||||
let _rmii_refclk = gpioa.pa1.into_alternate_af11().set_speed(Speed::VeryHigh);
|
||||
let _rmii_mdio = gpioa.pa2.into_alternate_af11().set_speed(Speed::VeryHigh);
|
||||
let _rmii_mdc = gpioc.pc1.into_alternate_af11().set_speed(Speed::VeryHigh);
|
||||
let _rmii_crs_dv = gpioa.pa7.into_alternate_af11().set_speed(Speed::VeryHigh);
|
||||
let _rmii_rxd0 = gpioc.pc4.into_alternate_af11().set_speed(Speed::VeryHigh);
|
||||
let _rmii_rxd1 = gpioc.pc5.into_alternate_af11().set_speed(Speed::VeryHigh);
|
||||
let _rmii_tx_en = gpiog.pg11.into_alternate_af11().set_speed(Speed::VeryHigh);
|
||||
let _rmii_txd0 = gpiog.pg13.into_alternate_af11().set_speed(Speed::VeryHigh);
|
||||
let _rmii_txd1 = gpiob.pb13.into_alternate_af11().set_speed(Speed::VeryHigh);
|
||||
}
|
||||
// Setup CDONE for checking
|
||||
let fpga_cdone = gpiod.pd15.into_pull_up_input();
|
||||
|
||||
// Configure ethernet
|
||||
let mut net_interface = {
|
||||
let mac_addr = net::wire::EthernetAddress([0xAC, 0x6F, 0x7A, 0xDE, 0xD6, 0xC8]);
|
||||
let (eth_dma, _eth_mac) = unsafe {
|
||||
ethernet::ethernet_init(
|
||||
dp.ETHERNET_MAC,
|
||||
dp.ETHERNET_MTL,
|
||||
dp.ETHERNET_DMA,
|
||||
&mut DES_RING,
|
||||
mac_addr.clone(),
|
||||
)
|
||||
};
|
||||
match fpga_cdone.is_high() {
|
||||
Ok(true) => hprintln!("FPGA is ready."),
|
||||
Ok(_) => hprintln!("FPGA is in reset state."),
|
||||
Err(_) => hprintln!("Error: Cannot read C_DONE"),
|
||||
}.unwrap();
|
||||
|
||||
// Setup Urukul
|
||||
/*
|
||||
* Using SPI1, AF5
|
||||
* SCLK -> PA5
|
||||
* MOSI -> PB5
|
||||
* MISO -> PA6
|
||||
* CS -> 0: PB12, 1: PA15, 2: PC7
|
||||
*/
|
||||
|
||||
unsafe { ethernet::enable_interrupt() }
|
||||
|
||||
let store = unsafe { &mut NET_STORE };
|
||||
|
||||
store.ip_addrs[0] = net::wire::IpCidr::new(net::wire::IpAddress::v4(192, 168, 1, 200), 24);
|
||||
|
||||
let neighbor_cache = net::iface::NeighborCache::new(&mut store.neighbor_cache[..]);
|
||||
|
||||
net::iface::EthernetInterfaceBuilder::new(eth_dma)
|
||||
.ethernet_addr(mac_addr)
|
||||
.neighbor_cache(neighbor_cache)
|
||||
.ip_addrs(&mut store.ip_addrs[..])
|
||||
.finalize()
|
||||
};
|
||||
|
||||
/*
|
||||
* Using SPI1, AF5
|
||||
* SCLK -> PA5
|
||||
* MOSI -> PB5
|
||||
* MISO -> PA6
|
||||
* CS -> 0: PB12, 1: PA15, 2: PC7
|
||||
* I/O_Update -> PB15
|
||||
*/
|
||||
let sclk = gpioa.pa5.into_alternate_af5();
|
||||
let mosi = gpiob.pb5.into_alternate_af5();
|
||||
let miso = gpioa.pa6.into_alternate_af5();
|
||||
|
||||
|
||||
let (cs0, cs1, cs2) = (
|
||||
gpiob.pb12.into_push_pull_output(),
|
||||
gpioa.pa15.into_push_pull_output(),
|
||||
gpioc.pc7.into_push_pull_output(),
|
||||
);
|
||||
|
||||
let io_update = gpiob.pb15.into_push_pull_output();
|
||||
/*
|
||||
* I/O_Update -> PB15
|
||||
*/
|
||||
let io_update = gpiob.pb15.into_push_pull_output();
|
||||
|
||||
let spi = dp.SPI1.spi(
|
||||
(sclk, miso, mosi),
|
||||
|
|
@ -199,63 +186,201 @@ fn main() -> ! {
|
|||
&ccdr.clocks,
|
||||
);
|
||||
|
||||
let cpld = CPLD::new(spi, (cs0, cs1, cs2), io_update);
|
||||
let parts = cpld.split();
|
||||
|
||||
let urukul = Urukul::new(
|
||||
let switch = CPLD::new(spi, (cs0, cs1, cs2), io_update);
|
||||
let parts = switch.split();
|
||||
let mut urukul = Urukul::new(
|
||||
parts.spi1, parts.spi2, parts.spi3, parts.spi4, parts.spi5, parts.spi6, parts.spi7,
|
||||
[25_000_000, 25_000_000, 25_000_000, 25_000_000]
|
||||
);
|
||||
|
||||
cp.SCB.enable_icache();
|
||||
// Setup ethernet pins
|
||||
setup_ethernet_pins(
|
||||
gpioa.pa1, gpioa.pa2, gpioc.pc1, gpioa.pa7, gpioc.pc4,
|
||||
gpioc.pc5, gpiog.pg11, gpiog.pg13, gpiob.pb13
|
||||
);
|
||||
|
||||
let mut time: u32 = 0;
|
||||
let mut next_ms = Instant::now();
|
||||
// Initialise ethernet...
|
||||
assert_eq!(ccdr.clocks.hclk().0, 200_000_000); // HCLK 200MHz
|
||||
assert_eq!(ccdr.clocks.pclk1().0, 100_000_000); // PCLK 100MHz
|
||||
assert_eq!(ccdr.clocks.pclk2().0, 100_000_000); // PCLK 100MHz
|
||||
assert_eq!(ccdr.clocks.pclk4().0, 100_000_000); // PCLK 100MHz
|
||||
|
||||
next_ms += 400_00.cycles();
|
||||
let mac_addr = smoltcp::wire::EthernetAddress::from_bytes(&MAC_ADDRESS);
|
||||
let (_eth_dma, mut eth_mac) = unsafe {
|
||||
ethernet::ethernet_init(
|
||||
dp.ETHERNET_MAC,
|
||||
dp.ETHERNET_MTL,
|
||||
dp.ETHERNET_DMA,
|
||||
&mut DES_RING,
|
||||
mac_addr.clone(),
|
||||
)
|
||||
};
|
||||
unsafe {
|
||||
ethernet::enable_interrupt();
|
||||
cp.NVIC.set_priority(stm32::Interrupt::ETH, 196); // Mid prio
|
||||
cortex_m::peripheral::NVIC::unmask(stm32::Interrupt::ETH);
|
||||
}
|
||||
|
||||
let mut socket_set_entries: [_; 8] = Default::default();
|
||||
let mut sockets = net::socket::SocketSet::new(&mut socket_set_entries[..]);
|
||||
add_socket!(sockets, rx_storage, tx_storage);
|
||||
// ----------------------------------------------------------
|
||||
// Begin periodic tasks
|
||||
|
||||
let tcp_stack = NetworkStack::new(&mut net_interface, sockets);
|
||||
let mut client = MqttClient::<consts::U256, _>::new(
|
||||
IpAddr::V4(Ipv4Addr::new(192, 168, 1, 125)),
|
||||
"nucleo",
|
||||
tcp_stack,
|
||||
)
|
||||
.unwrap();
|
||||
systick_init(&mut delay.free(), ccdr.clocks);
|
||||
unsafe {
|
||||
cp.SCB.shpr[15 - 4].write(128);
|
||||
} // systick exception priority
|
||||
|
||||
// ----------------------------------------------------------
|
||||
// Main application loop
|
||||
|
||||
// Setup addresses, maybe not MAC?
|
||||
// MAC is set up in prior
|
||||
let local_addr = IpAddress::v4(192, 168, 1, 200);
|
||||
let mut ip_addrs = [IpCidr::new(local_addr, 24)];
|
||||
|
||||
// let neighbor_cache = NeighborCache::new(BTreeMap::new());
|
||||
let mut neighbor_storage = [None; 16];
|
||||
let neighbor_cache = NeighborCache::new(&mut neighbor_storage[..]);
|
||||
|
||||
// Routes
|
||||
let default_v4_gw = Ipv4Address::new(192, 168, 1, 1);
|
||||
let mut routes_storage = [None; 8];
|
||||
let mut routes = Routes::new(&mut routes_storage[..]);
|
||||
routes.add_default_ipv4_route(default_v4_gw).unwrap();
|
||||
|
||||
// Device? _eth_dma, as it implements phy::device
|
||||
let mut iface = EthernetInterfaceBuilder::new(_eth_dma)
|
||||
.ethernet_addr(mac_addr)
|
||||
.neighbor_cache(neighbor_cache)
|
||||
.ip_addrs(&mut ip_addrs[..])
|
||||
.routes(routes)
|
||||
.finalize();
|
||||
|
||||
// SCPI configs
|
||||
// Device was declared in prior
|
||||
|
||||
// let mut errors = ArrayErrorQueue::<[Error; 10]>::new();
|
||||
// let mut context = Context::new(&mut urukul, &mut errors, TREE);
|
||||
|
||||
// //Response bytebuffer
|
||||
// let mut buf = ArrayVecFormatter::<[u8; 256]>::new();
|
||||
|
||||
// SCPI configs END
|
||||
|
||||
// TCP socket
|
||||
let server_socket = {
|
||||
static mut server_rx_storage :[u8; BUFFER_SIZE] = [0; BUFFER_SIZE];
|
||||
static mut server_tx_storage :[u8; BUFFER_SIZE] = [0; BUFFER_SIZE];
|
||||
let server_rx_buffer = TcpSocketBuffer::new( unsafe { &mut server_rx_storage[..] } );
|
||||
let server_tx_buffer = TcpSocketBuffer::new( unsafe { &mut server_tx_storage[..] } );
|
||||
TcpSocket::new(server_rx_buffer, server_tx_buffer)
|
||||
};
|
||||
|
||||
// Setup a silent socket
|
||||
let client_socket = {
|
||||
static mut client_rx_storage :[u8; BUFFER_SIZE] = [0; BUFFER_SIZE];
|
||||
static mut client_tx_storage :[u8; BUFFER_SIZE] = [0; BUFFER_SIZE];
|
||||
let client_rx_buffer = TcpSocketBuffer::new( unsafe { &mut client_rx_storage[..] } );
|
||||
let client_tx_buffer = TcpSocketBuffer::new( unsafe { &mut client_tx_storage[..] } );
|
||||
TcpSocket::new(client_rx_buffer, client_tx_buffer)
|
||||
};
|
||||
|
||||
// Socket storage
|
||||
let mut sockets_storage: [_; 2] = Default::default();
|
||||
|
||||
let mut socket_set = SocketSet::new(&mut sockets_storage[..]);
|
||||
let server_handle = socket_set.add(server_socket);
|
||||
let client_handle = socket_set.add(client_socket);
|
||||
|
||||
loop {
|
||||
let tick = Instant::now() > next_ms;
|
||||
let _time = TIME.load(Ordering::Relaxed);
|
||||
match iface.poll(&mut socket_set, Instant::from_millis(_time as i64)) {
|
||||
Ok(_) => {
|
||||
// hprintln!("Ethernet up").unwrap();
|
||||
},
|
||||
Err(e) => {
|
||||
hprintln!("Ethernet down!").unwrap();
|
||||
},
|
||||
};
|
||||
|
||||
if tick {
|
||||
next_ms += 400_000.cycles();
|
||||
time += 1;
|
||||
// Conenct to TCP server through port 49500
|
||||
{
|
||||
let mut socket = socket_set.get::<TcpSocket>(server_handle);
|
||||
if !socket.is_active() && !socket.is_listening(){
|
||||
socket.listen(7777).unwrap();
|
||||
hprintln!("Server listening").unwrap();
|
||||
}
|
||||
|
||||
// hprintln!("listener state :{}", socket.state()).unwrap();
|
||||
|
||||
if socket.can_recv() {
|
||||
hprintln!("{:?}", str::from_utf8(socket.recv(|data| {
|
||||
(data.len(), data)
|
||||
}).unwrap()).unwrap()).unwrap();
|
||||
}
|
||||
}
|
||||
|
||||
if tick && (time % 1000) == 0 {
|
||||
client
|
||||
.publish("nucleo", "Hello, World!".as_bytes(), QoS::AtMostOnce, &[])
|
||||
.unwrap();
|
||||
{
|
||||
let mut socket = socket_set.get::<TcpSocket>(client_handle);
|
||||
if !socket.is_open() || !socket.can_send() {
|
||||
socket.abort();
|
||||
socket.close();
|
||||
// hprintln!("reset state: {}", socket.state()).unwrap();
|
||||
socket.connect((IpAddress::v4(192, 168, 1, 200), 1883),
|
||||
(IpAddress::Unspecified, 45000)).unwrap();
|
||||
// hprintln!("post connect state: {}", socket.state()).unwrap();
|
||||
}
|
||||
|
||||
// hprintln!("client state: {}", socket.state()).unwrap();
|
||||
|
||||
if socket.can_send() {
|
||||
socket.send_slice(b"regards from socket").unwrap();
|
||||
}
|
||||
}
|
||||
|
||||
client
|
||||
.poll(|_client, topic, message, _properties| match topic {
|
||||
_ => hprintln!("On '{:?}', received: {:?}", topic, message).unwrap(),
|
||||
})
|
||||
.unwrap();
|
||||
|
||||
// Update the TCP stack.
|
||||
let sleep = client.network_stack.update(time);
|
||||
if sleep {
|
||||
//cortex_m::asm::wfi();
|
||||
cortex_m::asm::nop();
|
||||
}
|
||||
|
||||
match client.is_connected() {
|
||||
true => hprintln!("Connected"),
|
||||
false => hprintln!("No Connection"),
|
||||
}.unwrap();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
use stm32h7xx_hal::gpio::{
|
||||
gpioa::{PA1, PA2, PA7},
|
||||
gpiob::{PB13},
|
||||
gpioc::{PC1, PC4, PC5},
|
||||
gpiog::{PG11, PG13},
|
||||
Speed::VeryHigh,
|
||||
};
|
||||
|
||||
/*
|
||||
* Migrated ethernet setup pins
|
||||
*/
|
||||
pub fn setup_ethernet_pins<REF_CLK, MDIO, MDC, CRS_DV, RXD0, RXD1, TX_EN, TXD0, TXD1>(
|
||||
pa1: PA1<REF_CLK>, pa2: PA2<MDIO>, pc1: PC1<MDC>, pa7: PA7<CRS_DV>, pc4: PC4<RXD0>,
|
||||
pc5: PC5<RXD1>, pg11: PG11<TX_EN>, pg13: PG13<TXD0>, pb13: PB13<TXD1>
|
||||
) {
|
||||
pa1.into_alternate_af11().set_speed(VeryHigh);
|
||||
pa2.into_alternate_af11().set_speed(VeryHigh);
|
||||
pc1.into_alternate_af11().set_speed(VeryHigh);
|
||||
pa7.into_alternate_af11().set_speed(VeryHigh);
|
||||
pc4.into_alternate_af11().set_speed(VeryHigh);
|
||||
pc5.into_alternate_af11().set_speed(VeryHigh);
|
||||
pg11.into_alternate_af11().set_speed(VeryHigh);
|
||||
pg13.into_alternate_af11().set_speed(VeryHigh);
|
||||
pb13.into_alternate_af11().set_speed(VeryHigh);
|
||||
}
|
||||
|
||||
#[interrupt]
|
||||
fn ETH() {
|
||||
unsafe { ethernet::interrupt_handler() }
|
||||
}
|
||||
|
||||
#[exception]
|
||||
fn SysTick() {
|
||||
TIME.fetch_add(1, Ordering::Relaxed);
|
||||
}
|
||||
|
||||
#[exception]
|
||||
fn HardFault(ef: &cortex_m_rt::ExceptionFrame) -> ! {
|
||||
panic!("HardFault at {:#?}", ef);
|
||||
}
|
||||
|
||||
#[exception]
|
||||
fn DefaultHandler(irqn: i16) {
|
||||
panic!("Unhandled exception (IRQn = {})", irqn);
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue