forked from M-Labs/artiq-zynq
gateware: add DRTIO
Reviewed-on: M-Labs/artiq-zynq#140 Co-authored-by: mwojcik <mw@m-labs.hk> Co-committed-by: mwojcik <mw@m-labs.hk>
This commit is contained in:
parent
8d2bb09149
commit
ab0c205dd2
|
@ -0,0 +1,85 @@
|
|||
"""Auxiliary controller, common to satellite and master"""
|
||||
|
||||
from artiq.gateware.drtio.aux_controller import Transmitter, Receiver
|
||||
from migen.fhdl.simplify import FullMemoryWE
|
||||
from misoc.interconnect.csr import *
|
||||
from migen_axi.interconnect.sram import SRAM
|
||||
from migen_axi.interconnect import axi
|
||||
|
||||
max_packet = 1024
|
||||
|
||||
class _DRTIOAuxControllerBase(Module):
|
||||
def __init__(self, link_layer):
|
||||
self.bus = axi.Interface()
|
||||
self.submodules.transmitter = Transmitter(link_layer, len(self.bus.w.data))
|
||||
self.submodules.receiver = Receiver(link_layer, len(self.bus.w.data))
|
||||
|
||||
def get_csrs(self):
|
||||
return self.transmitter.get_csrs() + self.receiver.get_csrs()
|
||||
|
||||
|
||||
# TODO: FullMemoryWE should be applied by migen.build
|
||||
@FullMemoryWE()
|
||||
class DRTIOAuxControllerAxi(_DRTIOAuxControllerBase):
|
||||
def __init__(self, link_layer):
|
||||
_DRTIOAuxControllerBase.__init__(self, link_layer)
|
||||
|
||||
tx_sdram_if = SRAM(self.transmitter.mem, read_only=False)
|
||||
rx_sdram_if = SRAM(self.receiver.mem, read_only=True)
|
||||
aw_decoder = axi.AddressDecoder(self.bus.aw,
|
||||
[(lambda a: a[log2_int(max_packet)] == 0, tx_sdram_if.bus.aw),
|
||||
(lambda a: a[log2_int(max_packet)] == 1, rx_sdram_if.bus.aw)],
|
||||
register=True)
|
||||
ar_decoder = axi.AddressDecoder(self.bus.ar,
|
||||
[(lambda a: a[log2_int(max_packet)] == 0, tx_sdram_if.bus.ar),
|
||||
(lambda a: a[log2_int(max_packet)] == 1, rx_sdram_if.bus.ar)],
|
||||
register=True)
|
||||
# unlike wb, axi address decoder only connects ar/aw lanes,
|
||||
# the rest must also be connected!
|
||||
# not quite unlike an address decoder itself.
|
||||
|
||||
# connect bus.b with tx.b
|
||||
self.comb += [tx_sdram_if.bus.b.ready.eq(self.bus.b.ready),
|
||||
self.bus.b.id.eq(tx_sdram_if.bus.b.id),
|
||||
self.bus.b.resp.eq(tx_sdram_if.bus.b.resp),
|
||||
self.bus.b.valid.eq(tx_sdram_if.bus.b.valid)]
|
||||
# connect bus.w with tx.w
|
||||
# no worries about w.valid and slave sel here, only tx will be written to
|
||||
self.comb += [tx_sdram_if.bus.w.id.eq(self.bus.w.id),
|
||||
tx_sdram_if.bus.w.data.eq(self.bus.w.data),
|
||||
tx_sdram_if.bus.w.strb.eq(self.bus.w.strb),
|
||||
tx_sdram_if.bus.w.last.eq(self.bus.w.last),
|
||||
tx_sdram_if.bus.w.valid.eq(self.bus.w.valid),
|
||||
self.bus.w.ready.eq(tx_sdram_if.bus.w.ready)]
|
||||
# connect bus.r with rx.r and tx.r w/o data
|
||||
self.comb += [self.bus.r.id.eq(rx_sdram_if.bus.r.id | tx_sdram_if.bus.r.id),
|
||||
#self.bus.r.data.eq(rx_sdram_if.bus.r.data | tx_sdram_if.bus.r.data),
|
||||
self.bus.r.resp.eq(rx_sdram_if.bus.r.resp | tx_sdram_if.bus.r.resp),
|
||||
self.bus.r.last.eq(rx_sdram_if.bus.r.last | tx_sdram_if.bus.r.last),
|
||||
self.bus.r.valid.eq(rx_sdram_if.bus.r.valid | tx_sdram_if.bus.r.valid),
|
||||
rx_sdram_if.bus.r.ready.eq(self.bus.r.ready),
|
||||
tx_sdram_if.bus.r.ready.eq(self.bus.r.ready)]
|
||||
# connect read data after being masked
|
||||
masked = [Replicate(rx_sdram_if.bus.r.valid,
|
||||
len(self.bus.r.data)
|
||||
) & rx_sdram_if.bus.r.data,
|
||||
Replicate(tx_sdram_if.bus.r.valid,
|
||||
len(self.bus.r.data)
|
||||
) & tx_sdram_if.bus.r.data]
|
||||
self.comb += self.bus.r.data.eq(reduce(or_, masked))
|
||||
|
||||
self.submodules += tx_sdram_if, rx_sdram_if, aw_decoder, ar_decoder
|
||||
|
||||
|
||||
@FullMemoryWE()
|
||||
class DRTIOAuxControllerBare(_DRTIOAuxControllerBase):
|
||||
# Barebones version of the AuxController. No SRAM, no decoders.
|
||||
# add memories manually from tx and rx in target code.
|
||||
def get_tx_port(self):
|
||||
return self.transmitter.mem.get_port(write_capable=True)
|
||||
|
||||
def get_rx_port(self):
|
||||
return self.receiver.mem.get_port(write_capable=False)
|
||||
|
||||
def get_mem_size(self):
|
||||
return max_packet
|
|
@ -15,11 +15,16 @@ from misoc.integration import cpu_interface
|
|||
from artiq.coredevice import jsondesc
|
||||
from artiq.gateware import rtio, eem_7series
|
||||
from artiq.gateware.rtio.phy import ttl_simple
|
||||
from artiq.gateware.rtio.xilinx_clocking import RTIOClockMultiplier
|
||||
from artiq.gateware.drtio.transceiver import gtx_7series
|
||||
from artiq.gateware.drtio.siphaser import SiPhaser7Series
|
||||
from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
|
||||
from artiq.gateware.drtio import *
|
||||
|
||||
import dma
|
||||
import analyzer
|
||||
import acpki
|
||||
|
||||
import drtio_aux_controller
|
||||
|
||||
class RTIOCRG(Module, AutoCSR):
|
||||
def __init__(self, platform):
|
||||
|
@ -173,13 +178,289 @@ class GenericStandalone(SoCCore):
|
|||
|
||||
|
||||
class GenericMaster(SoCCore):
|
||||
def __init__(self, description, **kwargs):
|
||||
raise NotImplementedError
|
||||
def __init__(self, description, acpki=False):
|
||||
sys_clk_freq = 125e6
|
||||
rtio_clk_freq = 125e6
|
||||
|
||||
self.acpki = acpki
|
||||
self.rustc_cfg = dict()
|
||||
|
||||
platform = kasli_soc.Platform()
|
||||
platform.toolchain.bitstream_commands.extend([
|
||||
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
|
||||
])
|
||||
ident = self.__class__.__name__
|
||||
if self.acpki:
|
||||
ident = "acpki_" + ident
|
||||
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
|
||||
|
||||
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
|
||||
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
|
||||
|
||||
# kasli_soc has no SATA, but it has 4x SFP
|
||||
# not sure yet why sfp0 is omitted in MasterMode
|
||||
data_pads = [platform.request("sfp", i) for i in range(4)]
|
||||
|
||||
self.submodules.drtio_transceiver = gtx_7series.GTX(
|
||||
clock_pads=platform.request("clk125_gtp"),
|
||||
pads=data_pads,
|
||||
sys_clk_freq=sys_clk_freq)
|
||||
self.csr_devices.append("drtio_transceiver")
|
||||
|
||||
self.crg = self.ps7 # HACK for eem_7series to find the clock
|
||||
self.submodules.rtio_crg = RTIOClockMultiplier(rtio_clk_freq)
|
||||
self.csr_devices.append("rtio_crg")
|
||||
|
||||
self.rtio_channels = []
|
||||
has_grabber = any(peripheral["type"] == "grabber" for peripheral in description["peripherals"])
|
||||
if has_grabber:
|
||||
self.grabber_csr_group = []
|
||||
eem_7series.add_peripherals(self, description["peripherals"], iostandard=eem_iostandard)
|
||||
for i in (0, 1):
|
||||
print("USER LED at RTIO channel 0x{:06x}".format(len(self.rtio_channels)))
|
||||
user_led = self.platform.request("user_led", i)
|
||||
phy = ttl_simple.Output(user_led)
|
||||
self.submodules += phy
|
||||
self.rtio_channels.append(rtio.Channel.from_phy(phy))
|
||||
self.config["RTIO_LOG_CHANNEL"] = len(self.rtio_channels)
|
||||
self.rtio_channels.append(rtio.LogChannel())
|
||||
|
||||
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
|
||||
|
||||
drtio_csr_group = []
|
||||
drtioaux_csr_group = []
|
||||
drtioaux_memory_group = []
|
||||
self.drtio_cri = []
|
||||
for i in range(len(self.drtio_transceiver.channels)):
|
||||
core_name = "drtio" + str(i)
|
||||
coreaux_name = "drtioaux" + str(i)
|
||||
memory_name = "drtioaux" + str(i) + "_mem"
|
||||
drtio_csr_group.append(core_name)
|
||||
drtioaux_csr_group.append(coreaux_name)
|
||||
drtioaux_memory_group.append(memory_name)
|
||||
|
||||
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
|
||||
|
||||
core = cdr(DRTIOMaster(self.rtio_tsc, self.drtio_transceiver.channels[i]))
|
||||
setattr(self.submodules, core_name, core)
|
||||
self.drtio_cri.append(core.cri)
|
||||
self.csr_devices.append(core_name)
|
||||
|
||||
coreaux = cdr(drtio_aux_controller.DRTIOAuxControllerBare(core.link_layer))
|
||||
setattr(self.submodules, coreaux_name, coreaux)
|
||||
self.csr_devices.append(coreaux_name)
|
||||
|
||||
size = coreaux.get_mem_size()
|
||||
memory_address = self.axi2csr.register_port(coreaux.get_tx_port(), size)
|
||||
self.axi2csr.register_port(coreaux.get_rx_port(), size)
|
||||
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, size * 2)
|
||||
self.rustc_cfg["has_drtio"] = None
|
||||
self.rustc_cfg["has_drtio_routing"] = None
|
||||
self.add_csr_group("drtio", drtio_csr_group)
|
||||
self.add_csr_group("drtioaux", drtioaux_csr_group)
|
||||
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
|
||||
|
||||
self.submodules.rtio_core = rtio.Core(self.rtio_tsc, self.rtio_channels)
|
||||
self.csr_devices.append("rtio_core")
|
||||
|
||||
if self.acpki:
|
||||
self.rustc_cfg["ki_impl"] = "acp"
|
||||
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
|
||||
bus=self.ps7.s_axi_acp,
|
||||
user=self.ps7.s_axi_acp_user,
|
||||
evento=self.ps7.event.o)
|
||||
self.csr_devices.append("rtio")
|
||||
else:
|
||||
self.rustc_cfg["ki_impl"] = "csr"
|
||||
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
|
||||
self.csr_devices.append("rtio")
|
||||
|
||||
self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
|
||||
self.csr_devices.append("rtio_dma")
|
||||
|
||||
self.submodules.cri_con = rtio.CRIInterconnectShared(
|
||||
[self.rtio.cri, self.rtio_dma.cri],
|
||||
[self.rtio_core.cri] + self.drtio_cri,
|
||||
enable_routing=True)
|
||||
self.csr_devices.append("cri_con")
|
||||
|
||||
self.submodules.rtio_moninj = rtio.MonInj(self.rtio_channels)
|
||||
self.csr_devices.append("rtio_moninj")
|
||||
|
||||
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
|
||||
self.csr_devices.append("routing_table")
|
||||
|
||||
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.rtio_core.cri,
|
||||
self.ps7.s_axi_hp1)
|
||||
self.csr_devices.append("rtio_analyzer")
|
||||
|
||||
if has_grabber:
|
||||
self.rustc_cfg["has_grabber"] = None
|
||||
self.add_csr_group("grabber", self.grabber_csr_group)
|
||||
|
||||
|
||||
class GenericSatellite(SoCCore):
|
||||
def __init__(self, description, **kwargs):
|
||||
raise NotImplementedError
|
||||
def __init__(self, description, acpki=False):
|
||||
sys_clk_freq = 125e6
|
||||
rtio_clk_freq = 125e6
|
||||
|
||||
self.acpki = acpki
|
||||
self.rustc_cfg = dict()
|
||||
|
||||
platform = kasli_soc.Platform()
|
||||
platform.toolchain.bitstream_commands.extend([
|
||||
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
|
||||
])
|
||||
ident = self.__class__.__name__
|
||||
if self.acpki:
|
||||
ident = "acpki_" + ident
|
||||
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
|
||||
|
||||
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
|
||||
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
|
||||
|
||||
self.crg = self.ps7 # HACK for eem_7series to find the clock
|
||||
self.submodules.rtio_crg = RTIOClockMultiplier(rtio_clk_freq)
|
||||
self.csr_devices.append("rtio_crg")
|
||||
|
||||
data_pads = [platform.request("sfp", i) for i in range(4)]
|
||||
|
||||
self.submodules.drtio_transceiver = gtx_7series.GTX(
|
||||
clock_pads=platform.request("clk125_gtp"),
|
||||
pads=data_pads,
|
||||
sys_clk_freq=sys_clk_freq)
|
||||
self.csr_devices.append("drtio_transceiver")
|
||||
|
||||
self.rtio_channels = []
|
||||
has_grabber = any(peripheral["type"] == "grabber" for peripheral in description["peripherals"])
|
||||
if has_grabber:
|
||||
self.grabber_csr_group = []
|
||||
eem_7series.add_peripherals(self, description["peripherals"], iostandard=eem_iostandard)
|
||||
for i in (0, 1):
|
||||
print("USER LED at RTIO channel 0x{:06x}".format(len(self.rtio_channels)))
|
||||
user_led = self.platform.request("user_led", i)
|
||||
phy = ttl_simple.Output(user_led)
|
||||
self.submodules += phy
|
||||
self.rtio_channels.append(rtio.Channel.from_phy(phy))
|
||||
self.config["RTIO_LOG_CHANNEL"] = len(self.rtio_channels)
|
||||
self.rtio_channels.append(rtio.LogChannel())
|
||||
|
||||
self.submodules.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3)
|
||||
|
||||
drtioaux_csr_group = []
|
||||
drtioaux_memory_group = []
|
||||
drtiorep_csr_group = []
|
||||
self.drtio_cri = []
|
||||
for i in range(len(self.drtio_transceiver.channels)):
|
||||
coreaux_name = "drtioaux" + str(i)
|
||||
memory_name = "drtioaux" + str(i) + "_mem"
|
||||
drtioaux_csr_group.append(coreaux_name)
|
||||
drtioaux_memory_group.append(memory_name)
|
||||
|
||||
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
|
||||
|
||||
if i == 0:
|
||||
self.submodules.rx_synchronizer = cdr(XilinxRXSynchronizer())
|
||||
core = cdr(DRTIOSatellite(
|
||||
self.rtio_tsc, self.drtio_transceiver.channels[i],
|
||||
self.rx_synchronizer))
|
||||
self.submodules.drtiosat = core
|
||||
self.csr_devices.append("drtiosat")
|
||||
else:
|
||||
corerep_name = "drtiorep" + str(i-1)
|
||||
drtiorep_csr_group.append(corerep_name)
|
||||
|
||||
core = cdr(DRTIORepeater(
|
||||
self.rtio_tsc, self.drtio_transceiver.channels[i]))
|
||||
setattr(self.submodules, corerep_name, core)
|
||||
self.drtio_cri.append(core.cri)
|
||||
self.csr_devices.append(corerep_name)
|
||||
|
||||
coreaux = cdr(drtio_aux_controller.DRTIOAuxControllerBare(core.link_layer))
|
||||
setattr(self.submodules, coreaux_name, coreaux)
|
||||
self.csr_devices.append(coreaux_name)
|
||||
|
||||
mem_size = coreaux.get_mem_size()
|
||||
tx_port = coreaux.get_tx_port()
|
||||
rx_port = coreaux.get_rx_port()
|
||||
memory_address = self.axi2csr.register_port(tx_port, mem_size)
|
||||
# rcv in upper half of the memory, thus added second
|
||||
self.axi2csr.register_port(rx_port, mem_size)
|
||||
# and registered in PS interface
|
||||
# manually, because software refers to rx/tx by halves of entire memory block, not names
|
||||
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, mem_size * 2)
|
||||
self.rustc_cfg["has_drtio"] = None
|
||||
self.rustc_cfg["has_drtio_routing"] = None
|
||||
self.add_csr_group("drtioaux", drtioaux_csr_group)
|
||||
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
|
||||
self.add_csr_group("drtiorep", drtiorep_csr_group)
|
||||
|
||||
if self.acpki:
|
||||
self.rustc_cfg["ki_impl"] = "acp"
|
||||
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
|
||||
bus=self.ps7.s_axi_acp,
|
||||
user=self.ps7.s_axi_acp_user,
|
||||
evento=self.ps7.event.o)
|
||||
self.csr_devices.append("rtio")
|
||||
else:
|
||||
self.rustc_cfg["ki_impl"] = "csr"
|
||||
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
|
||||
self.csr_devices.append("rtio")
|
||||
|
||||
self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
|
||||
self.csr_devices.append("rtio_dma")
|
||||
|
||||
self.submodules.local_io = SyncRTIO(self.rtio_tsc, self.rtio_channels)
|
||||
self.comb += self.drtiosat.async_errors.eq(self.local_io.async_errors)
|
||||
|
||||
self.submodules.cri_con = rtio.CRIInterconnectShared(
|
||||
[self.drtiosat.cri],
|
||||
[self.local_io.cri] + self.drtio_cri,
|
||||
mode="sync", enable_routing=True)
|
||||
self.csr_devices.append("cri_con")
|
||||
|
||||
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
|
||||
self.csr_devices.append("routing_table")
|
||||
|
||||
self.submodules.rtio_moninj = rtio.MonInj(self.rtio_channels)
|
||||
self.csr_devices.append("rtio_moninj")
|
||||
|
||||
rtio_clk_period = 1e9/rtio_clk_freq
|
||||
self.rustc_cfg["rtio_frequency"] = str(rtio_clk_freq/1e6)
|
||||
|
||||
self.submodules.siphaser = SiPhaser7Series(
|
||||
si5324_clkin=platform.request("cdr_clk"),
|
||||
rx_synchronizer=self.rx_synchronizer,
|
||||
ultrascale=False,
|
||||
rtio_clk_freq=self.drtio_transceiver.rtio_clk_freq)
|
||||
platform.add_false_path_constraints(
|
||||
self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
|
||||
self.csr_devices.append("siphaser")
|
||||
self.rustc_cfg["has_si5324"] = None
|
||||
self.rustc_cfg["has_siphaser"] = None
|
||||
self.rustc_cfg["si5324_soft_reset"] = None
|
||||
|
||||
gtx0 = self.drtio_transceiver.gtxs[0]
|
||||
platform.add_period_constraint(gtx0.txoutclk, rtio_clk_period)
|
||||
platform.add_period_constraint(gtx0.rxoutclk, rtio_clk_period)
|
||||
platform.add_false_path_constraints(
|
||||
self.crg.cd_sys.clk,
|
||||
gtx0.txoutclk, gtx0.rxoutclk)
|
||||
for gtx in self.drtio_transceiver.gtxs[1:]:
|
||||
platform.add_period_constraint(gtx.rxoutclk, rtio_clk_period)
|
||||
platform.add_false_path_constraints(
|
||||
self.crg.cd_sys.clk, gtx.rxoutclk)
|
||||
|
||||
if has_grabber:
|
||||
self.rustc_cfg["has_grabber"] = None
|
||||
self.add_csr_group("grabber", self.grabber_csr_group)
|
||||
# no RTIO CRG here
|
||||
|
||||
|
||||
def write_mem_file(soc, filename):
|
||||
with open(filename, "w") as f:
|
||||
f.write(cpu_interface.get_mem_rust(
|
||||
soc.get_memory_regions(), soc.get_memory_groups(), None))
|
||||
|
||||
|
||||
def write_csr_file(soc, filename):
|
||||
|
@ -204,6 +485,8 @@ def main():
|
|||
help="build Rust interface into the specified file")
|
||||
parser.add_argument("-c", default=None,
|
||||
help="build Rust compiler configuration into the specified file")
|
||||
parser.add_argument("-m", default=None,
|
||||
help="build Rust memory interface into the specified file")
|
||||
parser.add_argument("-g", default=None,
|
||||
help="build gateware into the specified directory")
|
||||
parser.add_argument("--acpki", default=False, action="store_true",
|
||||
|
@ -230,6 +513,8 @@ def main():
|
|||
|
||||
if args.r is not None:
|
||||
write_csr_file(soc, args.r)
|
||||
if args.m is not None:
|
||||
write_mem_file(soc, args.m)
|
||||
if args.c is not None:
|
||||
write_rustc_cfg_file(soc, args.c)
|
||||
if args.g is not None:
|
||||
|
|
|
@ -11,13 +11,20 @@ from migen_axi.integration.soc_core import SoCCore
|
|||
from migen_axi.platforms import zc706
|
||||
from misoc.interconnect.csr import *
|
||||
from misoc.integration import cpu_interface
|
||||
from misoc.cores import gpio
|
||||
|
||||
from artiq.gateware import rtio, nist_clock, nist_qc2
|
||||
from artiq.gateware.rtio.phy import ttl_simple, ttl_serdes_7series, dds, spi2
|
||||
from artiq.gateware.rtio.xilinx_clocking import RTIOClockMultiplier, fix_serdes_timing_path
|
||||
from artiq.gateware.drtio.transceiver import gtx_7series
|
||||
from artiq.gateware.drtio.siphaser import SiPhaser7Series
|
||||
from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
|
||||
from artiq.gateware.drtio import *
|
||||
|
||||
import dma
|
||||
import analyzer
|
||||
import acpki
|
||||
import drtio_aux_controller
|
||||
|
||||
|
||||
class RTIOCRG(Module, AutoCSR):
|
||||
|
@ -64,23 +71,45 @@ class RTIOCRG(Module, AutoCSR):
|
|||
]
|
||||
|
||||
|
||||
# The NIST backplanes require setting VADJ to 3.3V by reprogramming the power supply.
|
||||
# This also changes the I/O standard for some on-board LEDs.
|
||||
leds_fmc33 = [
|
||||
("user_led_33", 0, Pins("Y21"), IOStandard("LVCMOS33")),
|
||||
("user_led_33", 1, Pins("G2"), IOStandard("LVCMOS15")),
|
||||
("user_led_33", 2, Pins("W21"), IOStandard("LVCMOS33")),
|
||||
("user_led_33", 3, Pins("A17"), IOStandard("LVCMOS15")),
|
||||
]
|
||||
|
||||
# same deal as with LEDs - changed I/O standard.
|
||||
si5324_fmc33 = [
|
||||
("si5324_33", 0,
|
||||
Subsignal("rst_n", Pins("W23"), IOStandard("LVCMOS33")),
|
||||
Subsignal("int", Pins("AJ25"), IOStandard("LVCMOS33"))
|
||||
),
|
||||
]
|
||||
|
||||
|
||||
def prepare_zc706_platform(platform):
|
||||
platform.toolchain.bitstream_commands.extend([
|
||||
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
|
||||
])
|
||||
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
|
||||
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
|
||||
|
||||
|
||||
class ZC706(SoCCore):
|
||||
def __init__(self, acpki=False):
|
||||
self.acpki = acpki
|
||||
self.rustc_cfg = dict()
|
||||
|
||||
platform = zc706.Platform()
|
||||
platform.toolchain.bitstream_commands.extend([
|
||||
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
|
||||
])
|
||||
prepare_zc706_platform(platform)
|
||||
|
||||
ident = self.__class__.__name__
|
||||
if self.acpki:
|
||||
ident = "acpki_" + ident
|
||||
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
|
||||
|
||||
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
|
||||
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
|
||||
|
||||
self.submodules.rtio_crg = RTIOCRG(self.platform, self.ps7.cd_sys.clk)
|
||||
self.csr_devices.append("rtio_crg")
|
||||
self.rustc_cfg["has_rtio_crg_clock_sel"] = None
|
||||
|
@ -122,10 +151,284 @@ class ZC706(SoCCore):
|
|||
self.csr_devices.append("rtio_analyzer")
|
||||
|
||||
|
||||
class Simple(ZC706):
|
||||
def __init__(self, **kwargs):
|
||||
ZC706.__init__(self, **kwargs)
|
||||
class _MasterBase(SoCCore):
|
||||
def __init__(self, acpki=False):
|
||||
self.acpki = acpki
|
||||
self.rustc_cfg = dict()
|
||||
|
||||
platform = zc706.Platform()
|
||||
prepare_zc706_platform(platform)
|
||||
ident = self.__class__.__name__
|
||||
if self.acpki:
|
||||
ident = "acpki_" + ident
|
||||
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
|
||||
|
||||
platform.add_extension(si5324_fmc33)
|
||||
|
||||
self.sys_clk_freq = 125e6
|
||||
|
||||
platform = self.platform
|
||||
|
||||
self.comb += platform.request("sfp_tx_disable_n").eq(1)
|
||||
data_pads = [
|
||||
platform.request("sfp"),
|
||||
platform.request("user_sma_mgt")
|
||||
]
|
||||
|
||||
# 1000BASE_BX10 Ethernet compatible, 125MHz RTIO clock
|
||||
self.submodules.drtio_transceiver = gtx_7series.GTX(
|
||||
clock_pads=platform.request("si5324_clkout"),
|
||||
pads=data_pads,
|
||||
sys_clk_freq=self.sys_clk_freq)
|
||||
self.csr_devices.append("drtio_transceiver")
|
||||
|
||||
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
|
||||
|
||||
drtio_csr_group = []
|
||||
drtioaux_csr_group = []
|
||||
drtioaux_memory_group = []
|
||||
self.drtio_cri = []
|
||||
for i in range(len(self.drtio_transceiver.channels)):
|
||||
core_name = "drtio" + str(i)
|
||||
coreaux_name = "drtioaux" + str(i)
|
||||
memory_name = "drtioaux" + str(i) + "_mem"
|
||||
drtio_csr_group.append(core_name)
|
||||
drtioaux_csr_group.append(coreaux_name)
|
||||
drtioaux_memory_group.append(memory_name)
|
||||
|
||||
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
|
||||
|
||||
core = cdr(DRTIOMaster(
|
||||
self.rtio_tsc, self.drtio_transceiver.channels[i]))
|
||||
setattr(self.submodules, core_name, core)
|
||||
self.drtio_cri.append(core.cri)
|
||||
self.csr_devices.append(core_name)
|
||||
|
||||
coreaux = cdr(drtio_aux_controller.DRTIOAuxControllerBare(core.link_layer))
|
||||
setattr(self.submodules, coreaux_name, coreaux)
|
||||
self.csr_devices.append(coreaux_name)
|
||||
|
||||
mem_size = coreaux.get_mem_size()
|
||||
memory_address = self.axi2csr.register_port(coreaux.get_tx_port(), mem_size)
|
||||
self.axi2csr.register_port(coreaux.get_rx_port(), mem_size)
|
||||
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, mem_size * 2)
|
||||
self.rustc_cfg["has_drtio"] = None
|
||||
self.rustc_cfg["has_drtio_routing"] = None
|
||||
self.add_csr_group("drtio", drtio_csr_group)
|
||||
self.add_csr_group("drtioaux", drtioaux_csr_group)
|
||||
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
|
||||
|
||||
self.rustc_cfg["RTIO_FREQUENCY"] = str(self.drtio_transceiver.rtio_clk_freq/1e6)
|
||||
|
||||
self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324_33").rst_n)
|
||||
self.csr_devices.append("si5324_rst_n")
|
||||
self.rustc_cfg["has_si5324"] = None
|
||||
self.rustc_cfg["si5324_as_synthesizer"] = None
|
||||
|
||||
rtio_clk_period = 1e9/self.drtio_transceiver.rtio_clk_freq
|
||||
# Constrain TX & RX timing for the first transceiver channel
|
||||
# (First channel acts as master for phase alignment for all channels' TX)
|
||||
gtx0 = self.drtio_transceiver.gtxs[0]
|
||||
platform.add_period_constraint(gtx0.txoutclk, rtio_clk_period)
|
||||
platform.add_period_constraint(gtx0.rxoutclk, rtio_clk_period)
|
||||
platform.add_false_path_constraints(
|
||||
self.ps7.cd_sys.clk,
|
||||
gtx0.txoutclk, gtx0.rxoutclk)
|
||||
# Constrain RX timing for the each transceiver channel
|
||||
# (Each channel performs single-lane phase alignment for RX)
|
||||
for gtx in self.drtio_transceiver.gtxs[1:]:
|
||||
platform.add_period_constraint(gtx.rxoutclk, rtio_clk_period)
|
||||
platform.add_false_path_constraints(
|
||||
self.ps7.cd_sys.clk, gtx0.txoutclk, gtx.rxoutclk)
|
||||
|
||||
self.submodules.rtio_crg = RTIOClockMultiplier(self.sys_clk_freq)
|
||||
self.csr_devices.append("rtio_crg")
|
||||
fix_serdes_timing_path(self.platform)
|
||||
|
||||
def add_rtio(self, rtio_channels):
|
||||
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
|
||||
self.submodules.rtio_core = rtio.Core(self.rtio_tsc, rtio_channels)
|
||||
self.csr_devices.append("rtio_core")
|
||||
|
||||
if self.acpki:
|
||||
self.rustc_cfg["ki_impl"] = "acp"
|
||||
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
|
||||
bus=self.ps7.s_axi_acp,
|
||||
user=self.ps7.s_axi_acp_user,
|
||||
evento=self.ps7.event.o)
|
||||
self.csr_devices.append("rtio")
|
||||
else:
|
||||
self.rustc_cfg["ki_impl"] = "csr"
|
||||
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
|
||||
self.csr_devices.append("rtio")
|
||||
|
||||
self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
|
||||
self.csr_devices.append("rtio_dma")
|
||||
|
||||
self.submodules.local_io = SyncRTIO(self.rtio_tsc, rtio_channels)
|
||||
self.submodules.cri_con = rtio.CRIInterconnectShared(
|
||||
[self.rtio.cri, self.rtio_dma.cri],
|
||||
[self.local_io.cri] + self.drtio_cri,
|
||||
mode="sync", enable_routing=True)
|
||||
self.csr_devices.append("cri_con")
|
||||
|
||||
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
|
||||
self.csr_devices.append("rtio_moninj")
|
||||
|
||||
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.rtio_core.cri,
|
||||
self.ps7.s_axi_hp1)
|
||||
self.csr_devices.append("rtio_analyzer")
|
||||
|
||||
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
|
||||
self.csr_devices.append("routing_table")
|
||||
|
||||
|
||||
class _SatelliteBase(SoCCore):
|
||||
def __init__(self, acpki=False):
|
||||
self.acpki = acpki
|
||||
self.rustc_cfg = dict()
|
||||
|
||||
platform = zc706.Platform()
|
||||
prepare_zc706_platform(platform)
|
||||
ident = self.__class__.__name__
|
||||
if self.acpki:
|
||||
ident = "acpki_" + ident
|
||||
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
|
||||
|
||||
platform.add_extension(si5324_fmc33)
|
||||
|
||||
self.sys_clk_freq = 125e6
|
||||
platform = self.platform
|
||||
|
||||
# SFP
|
||||
self.comb += platform.request("sfp_tx_disable_n").eq(0)
|
||||
data_pads = [
|
||||
platform.request("sfp"),
|
||||
platform.request("user_sma_mgt")
|
||||
]
|
||||
|
||||
self.submodules.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3)
|
||||
|
||||
# 1000BASE_BX10 Ethernet compatible, 125MHz RTIO clock
|
||||
self.submodules.drtio_transceiver = gtx_7series.GTX(
|
||||
clock_pads=platform.request("si5324_clkout"),
|
||||
pads=data_pads,
|
||||
sys_clk_freq=self.sys_clk_freq)
|
||||
self.csr_devices.append("drtio_transceiver")
|
||||
|
||||
drtioaux_csr_group = []
|
||||
drtioaux_memory_group = []
|
||||
drtiorep_csr_group = []
|
||||
self.drtio_cri = []
|
||||
for i in range(len(self.drtio_transceiver.channels)):
|
||||
coreaux_name = "drtioaux" + str(i)
|
||||
memory_name = "drtioaux" + str(i) + "_mem"
|
||||
drtioaux_csr_group.append(coreaux_name)
|
||||
drtioaux_memory_group.append(memory_name)
|
||||
|
||||
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
|
||||
|
||||
# Satellite
|
||||
if i == 0:
|
||||
self.submodules.rx_synchronizer = cdr(XilinxRXSynchronizer())
|
||||
core = cdr(DRTIOSatellite(
|
||||
self.rtio_tsc, self.drtio_transceiver.channels[0], self.rx_synchronizer))
|
||||
self.submodules.drtiosat = core
|
||||
self.csr_devices.append("drtiosat")
|
||||
# Repeaters
|
||||
else:
|
||||
corerep_name = "drtiorep" + str(i-1)
|
||||
drtiorep_csr_group.append(corerep_name)
|
||||
core = cdr(DRTIORepeater(
|
||||
self.rtio_tsc, self.drtio_transceiver.channels[i]))
|
||||
setattr(self.submodules, corerep_name, core)
|
||||
self.drtio_cri.append(core.cri)
|
||||
self.csr_devices.append(corerep_name)
|
||||
|
||||
coreaux = cdr(drtio_aux_controller.DRTIOAuxControllerBare(core.link_layer))
|
||||
setattr(self.submodules, coreaux_name, coreaux)
|
||||
self.csr_devices.append(coreaux_name)
|
||||
|
||||
mem_size = coreaux.get_mem_size()
|
||||
tx_port = coreaux.get_tx_port()
|
||||
rx_port = coreaux.get_rx_port()
|
||||
memory_address = self.axi2csr.register_port(tx_port, mem_size)
|
||||
# rcv in upper half of the memory, thus added second
|
||||
self.axi2csr.register_port(rx_port, mem_size)
|
||||
# and registered in PS interface
|
||||
# manually, because software refers to rx/tx by halves of entire memory block, not names
|
||||
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, mem_size * 2)
|
||||
self.rustc_cfg["has_drtio"] = None
|
||||
self.rustc_cfg["has_drtio_routing"] = None
|
||||
self.add_csr_group("drtioaux", drtioaux_csr_group)
|
||||
self.add_csr_group("drtiorep", drtiorep_csr_group)
|
||||
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
|
||||
|
||||
self.rustc_cfg["rtio_frequency"] = str(self.drtio_transceiver.rtio_clk_freq/1e6)
|
||||
|
||||
# Si5324 Phaser
|
||||
self.submodules.siphaser = SiPhaser7Series(
|
||||
si5324_clkin=platform.request("si5324_clkin"),
|
||||
rx_synchronizer=self.rx_synchronizer,
|
||||
ultrascale=False,
|
||||
rtio_clk_freq=self.drtio_transceiver.rtio_clk_freq)
|
||||
platform.add_false_path_constraints(
|
||||
self.ps7.cd_sys.clk, self.siphaser.mmcm_freerun_output)
|
||||
self.csr_devices.append("siphaser")
|
||||
self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324_33").rst_n)
|
||||
self.csr_devices.append("si5324_rst_n")
|
||||
self.rustc_cfg["has_si5324"] = None
|
||||
self.rustc_cfg["has_siphaser"] = None
|
||||
|
||||
rtio_clk_period = 1e9/self.drtio_transceiver.rtio_clk_freq
|
||||
# Constrain TX & RX timing for the first transceiver channel
|
||||
# (First channel acts as master for phase alignment for all channels' TX)
|
||||
gtx0 = self.drtio_transceiver.gtxs[0]
|
||||
platform.add_period_constraint(gtx0.txoutclk, rtio_clk_period)
|
||||
platform.add_period_constraint(gtx0.rxoutclk, rtio_clk_period)
|
||||
platform.add_false_path_constraints(
|
||||
self.ps7.cd_sys.clk,
|
||||
gtx0.txoutclk, gtx0.rxoutclk)
|
||||
# Constrain RX timing for the each transceiver channel
|
||||
# (Each channel performs single-lane phase alignment for RX)
|
||||
for gtx in self.drtio_transceiver.gtxs[1:]:
|
||||
platform.add_period_constraint(gtx.rxoutclk, rtio_clk_period)
|
||||
platform.add_false_path_constraints(
|
||||
self.ps7.cd_sys.clk, gtx.rxoutclk)
|
||||
|
||||
self.submodules.rtio_crg = RTIOClockMultiplier(self.sys_clk_freq)
|
||||
self.csr_devices.append("rtio_crg")
|
||||
fix_serdes_timing_path(self.platform)
|
||||
|
||||
def add_rtio(self, rtio_channels):
|
||||
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
|
||||
self.csr_devices.append("rtio_moninj")
|
||||
|
||||
if self.acpki:
|
||||
self.rustc_cfg["ki_impl"] = "acp"
|
||||
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
|
||||
bus=self.ps7.s_axi_acp,
|
||||
user=self.ps7.s_axi_acp_user,
|
||||
evento=self.ps7.event.o)
|
||||
self.csr_devices.append("rtio")
|
||||
else:
|
||||
self.rustc_cfg["ki_impl"] = "csr"
|
||||
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
|
||||
self.csr_devices.append("rtio")
|
||||
|
||||
self.submodules.local_io = SyncRTIO(self.rtio_tsc, rtio_channels)
|
||||
self.submodules.cri_con = rtio.CRIInterconnectShared(
|
||||
[self.drtiosat.cri],
|
||||
[self.local_io.cri] + self.drtio_cri,
|
||||
mode="sync", enable_routing=True)
|
||||
self.csr_devices.append("cri_con")
|
||||
|
||||
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
|
||||
self.csr_devices.append("routing_table")
|
||||
|
||||
|
||||
class _Simple_RTIO:
|
||||
def __init__(self):
|
||||
platform = self.platform
|
||||
|
||||
rtio_channels = []
|
||||
|
@ -140,23 +443,11 @@ class Simple(ZC706):
|
|||
self.add_rtio(rtio_channels)
|
||||
|
||||
|
||||
# The NIST backplanes require setting VADJ to 3.3V by reprogramming the power supply.
|
||||
# This also changes the I/O standard for some on-board LEDs.
|
||||
leds_fmc33 = [
|
||||
("user_led_33", 0, Pins("Y21"), IOStandard("LVCMOS33")),
|
||||
("user_led_33", 1, Pins("G2"), IOStandard("LVCMOS15")),
|
||||
("user_led_33", 2, Pins("W21"), IOStandard("LVCMOS33")),
|
||||
("user_led_33", 3, Pins("A17"), IOStandard("LVCMOS15")),
|
||||
]
|
||||
|
||||
|
||||
class NIST_CLOCK(ZC706):
|
||||
class _NIST_CLOCK_RTIO:
|
||||
"""
|
||||
NIST clock hardware, with old backplane and 11 DDS channels
|
||||
"""
|
||||
def __init__(self, **kwargs):
|
||||
ZC706.__init__(self, **kwargs)
|
||||
|
||||
def __init__(self):
|
||||
platform = self.platform
|
||||
platform.add_extension(nist_clock.fmc_adapter_io)
|
||||
platform.add_extension(leds_fmc33)
|
||||
|
@ -203,14 +494,12 @@ class NIST_CLOCK(ZC706):
|
|||
self.add_rtio(rtio_channels)
|
||||
|
||||
|
||||
class NIST_QC2(ZC706):
|
||||
class _NIST_QC2_RTIO:
|
||||
"""
|
||||
NIST QC2 hardware, as used in Quantum I and Quantum II, with new backplane
|
||||
and 24 DDS channels. Two backplanes are used.
|
||||
"""
|
||||
def __init__(self, **kwargs):
|
||||
ZC706.__init__(self, **kwargs)
|
||||
|
||||
def __init__(self):
|
||||
platform = self.platform
|
||||
platform.add_extension(nist_qc2.fmc_adapter_io)
|
||||
platform.add_extension(leds_fmc33)
|
||||
|
@ -253,7 +542,56 @@ class NIST_QC2(ZC706):
|
|||
self.add_rtio(rtio_channels)
|
||||
|
||||
|
||||
VARIANTS = {cls.__name__.lower(): cls for cls in [Simple, NIST_CLOCK, NIST_QC2]}
|
||||
class Simple(ZC706, _Simple_RTIO):
|
||||
def __init__(self, acpki):
|
||||
ZC706.__init__(self, acpki)
|
||||
_Simple_RTIO.__init__(self)
|
||||
|
||||
class Master(_MasterBase, _Simple_RTIO):
|
||||
def __init__(self, acpki):
|
||||
_MasterBase.__init__(self, acpki)
|
||||
_Simple_RTIO.__init__(self)
|
||||
|
||||
class Satellite(_SatelliteBase, _Simple_RTIO):
|
||||
def __init__(self, acpki):
|
||||
_SatelliteBase.__init__(self, acpki)
|
||||
_Simple_RTIO.__init__(self)
|
||||
|
||||
class NIST_CLOCK(ZC706, _NIST_CLOCK_RTIO):
|
||||
def __init__(self, acpki):
|
||||
ZC706.__init__(self, acpki)
|
||||
_NIST_CLOCK_RTIO.__init__(self)
|
||||
|
||||
class NIST_CLOCK_Master(_MasterBase, _NIST_CLOCK_RTIO):
|
||||
def __init__(self, acpki):
|
||||
_MasterBase.__init__(self, acpki)
|
||||
|
||||
_NIST_CLOCK_RTIO.__init__(self)
|
||||
|
||||
class NIST_CLOCK_Satellite(_SatelliteBase, _NIST_CLOCK_RTIO):
|
||||
def __init__(self, acpki):
|
||||
_SatelliteBase.__init__(self, acpki)
|
||||
_NIST_CLOCK_RTIO.__init__(self)
|
||||
|
||||
class NIST_QC2(ZC706, _NIST_QC2_RTIO):
|
||||
def __init__(self, acpki):
|
||||
ZC706.__init__(self, acpki)
|
||||
_NIST_QC2_RTIO.__init__(self)
|
||||
|
||||
class NIST_QC2_Master(_MasterBase, _NIST_QC2_RTIO):
|
||||
def __init__(self, acpki):
|
||||
_MasterBase.__init__(self, acpki)
|
||||
_NIST_QC2_RTIO.__init__(self)
|
||||
|
||||
class NIST_QC2_Satellite(_SatelliteBase, _NIST_QC2_RTIO):
|
||||
def __init__(self, acpki):
|
||||
_SatelliteBase.__init__(self, acpki)
|
||||
_NIST_QC2_RTIO.__init__(self)
|
||||
|
||||
|
||||
VARIANTS = {cls.__name__.lower(): cls for cls in [Simple, Master, Satellite,
|
||||
NIST_CLOCK, NIST_CLOCK_Master, NIST_CLOCK_Satellite,
|
||||
NIST_QC2, NIST_QC2_Master, NIST_QC2_Satellite]}
|
||||
|
||||
|
||||
def write_csr_file(soc, filename):
|
||||
|
@ -261,6 +599,11 @@ def write_csr_file(soc, filename):
|
|||
f.write(cpu_interface.get_csr_rust(
|
||||
soc.get_csr_regions(), soc.get_csr_groups(), soc.get_constants()))
|
||||
|
||||
def write_mem_file(soc, filename):
|
||||
with open(filename, "w") as f:
|
||||
f.write(cpu_interface.get_mem_rust(
|
||||
soc.get_memory_regions(), soc.get_memory_groups(), None))
|
||||
|
||||
|
||||
def write_rustc_cfg_file(soc, filename):
|
||||
with open(filename, "w") as f:
|
||||
|
@ -276,6 +619,8 @@ def main():
|
|||
description="ARTIQ port to the ZC706 Zynq development kit")
|
||||
parser.add_argument("-r", default=None,
|
||||
help="build Rust interface into the specified file")
|
||||
parser.add_argument("-m", default=None,
|
||||
help="build Rust memory interface into the specified file")
|
||||
parser.add_argument("-c", default=None,
|
||||
help="build Rust compiler configuration into the specified file")
|
||||
parser.add_argument("-g", default=None,
|
||||
|
@ -300,11 +645,12 @@ def main():
|
|||
|
||||
if args.r is not None:
|
||||
write_csr_file(soc, args.r)
|
||||
if args.m is not None:
|
||||
write_mem_file(soc, args.m)
|
||||
if args.c is not None:
|
||||
write_rustc_cfg_file(soc, args.c)
|
||||
if args.g is not None:
|
||||
soc.build(build_dir=args.g)
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
main()
|
||||
|
|
Loading…
Reference in New Issue