forked from M-Labs/humpback-dds
47 lines
815 B
Markdown
47 lines
815 B
Markdown
# Firmware development
|
|
|
|
RF signal generator using Urukul, Humpback and STM32
|
|
|
|
## Nix commands
|
|
|
|
Open nix shell before anything.
|
|
```bash
|
|
nix-shell
|
|
```
|
|
|
|
Start OpenOCD server in unblocking mode.
|
|
```bash
|
|
run-openocd
|
|
```
|
|
|
|
Start OpenOCD server in blocking mode, for console print through semihosting.
|
|
```bash
|
|
run-openocd-block
|
|
```
|
|
|
|
Reset STM32 flash before flashing bitstream for Humpback FPGA.
|
|
```bash
|
|
reset-flash
|
|
```
|
|
|
|
Load bitstream to Humpback FPGA.
|
|
```bash
|
|
configure-fpga
|
|
```
|
|
|
|
Verify a proper bitstream is loaded to STM32 flash.
|
|
```bash
|
|
verify-fpga-config
|
|
```
|
|
|
|
Run a Ethernet server with TCP socket examples.
|
|
```bash
|
|
run-ethernet-server
|
|
```
|
|
|
|
Select a different gdb config file from ```gdb_config``` directory.
|
|
```bash
|
|
set-gdb-config-file <filename>
|
|
```
|
|
Leave <filename> as blank for default openocd.gdb configuration.
|