humpback: fixed migen mapping

nmigen/humpback.py

@@ -31,7 +31,7 @@ class HumpbackPlatform(LatticeICE40Platform):
 			Attrs(IO_STANDARD="SB_LVCMOS")
 		),
 
-		# Define UART interfaces
+		# TODO: Define UART interfaces somewhere else, make it optional
 		UARTResource(0,
 			rx="T11", tx="M13", rts="M15", cts="T10",
 			attrs=Attrs(IO_STANDARD="SB_LVCMOS", PULLUP=1)
@@ -46,6 +46,7 @@ class HumpbackPlatform(LatticeICE40Platform):
 #		),
 
 		# Define SPI interfaces
+		# TODO; Make it optional, define it in a block
 		# Note: Use "role=device" to make humpback a SPI slave
 		#	The ~CS pin is a global pin, but not being configured global.
 		SPIResource(0,
@@ -54,6 +55,7 @@ class HumpbackPlatform(LatticeICE40Platform):
 		),
 
 		# Define I2C interface
+		# TODO: Make it optional, declare it in a block itself
 		#	Use "role=device" to make humpback a I2C slave
 		I2CResource(0,
 			sda="T16", scl="M12",
@@ -126,11 +128,14 @@ class HumpbackPlatform(LatticeICE40Platform):
 		}),
 
 		# STM32 Nucleo/ Arduino Connector
+		# TODO: SPI signal matching
 		Connector("stm32", "pins", {
 	        "PA0": "A2",
-            "PA1": "P14",
-            "PA2": "B8",
+			"PA1": "P14",
+			"PA2": "B8",
 	        "PA3": "L13",
+	        "PA5": "C8",
+	        "PA6": "T2",
 		    "PA7": "N12",
 		    "PA8": "M9",
 		    "PA9": "P10",
@@ -140,7 +145,10 @@ class HumpbackPlatform(LatticeICE40Platform):
 		    "PB0": "A1",
 		    "PB1": "G12",
 		    "PB2": "B6",
+		    "PB5": "N5",
 		    "PB6": "A7",
+		    "PB8": "M12",
+		    "PB9": "T16",
 		    "PB10": "C3",
 		    "PB11": "F7",
 		    "PB12": "B13",
@@ -164,20 +172,44 @@ class HumpbackPlatform(LatticeICE40Platform):
 			"PD0": "T9",
 			"PD1": "N9",
 			"PD2": "K13",
+			"PD3": "T10",
+			"PD4": "A6",
+			"PD5": "T11",
+			"PD6": "M13",
 			"PD7": "L12",
 			"PD11": "E5",
 			"PD12": "D5",
 			"PD13": "C5",
+			"PD14": "R2",
+
+			"PE0": "D3",
+			"PE2": "P15",
+			"PE3": "N10",
+			"PE4": "R15",
+			"PE5": "T15",
+			"PE6": "M8",
+			"PE7": "E6",
+			"PE8": "D6",
+			"PE9": "F12",
+			"PE10": "A5",
+			"PE11": "G11",
+			"PE12": "B4",
+			"PE13": "F11",
+			"PE14": "C4",
+			"PE15": "B3",
 
 	        "PF7": "L9",
 			"PF8": "L10",
 			"PF9": "P9",
 			"PF14": "B9",
+			"PF15": "B16",
 
 			"PG0": "M7",
 			"PG1": "P8",
 			"PG2": "K14",
 			"PG3": "K15",
+			"PG9": "T13",
+			"PG10": "M11",
 		}),
 
 		# Beaglebone Black Connector