890 B
890 B
Network
Setup
Ethernet, IP: 192.168.1.26/24
Use telnet or netcat to connect to port 23/tcp (telnet)
Reading ADC input
Set report mode to once to obtain the single next value. Report mode
will turn itself off after the next reading.
Set report mode to continuous for a continuous stream of input data.
The scope of this setting is per TCP session.
Commands
| Syntax | Function |
|---|---|
report |
Report mode: once |
report mode |
Show current report mode |
report mode <off or once or continuous> |
Set report mode |
pwm <width> <total> |
Set PWM duty cycle to width / total |