ionpak-thermostat/firmware/README.md

68 lines
2.3 KiB
Markdown
Raw Normal View History

2019-09-18 06:29:29 +08:00
# Thermostat v1 prototype firmware
## Building
### On Debian-based systems
2019-09-18 07:53:19 +08:00
- install [rustup](https://rustup.rs/)
2019-09-18 06:29:29 +08:00
```shell
apt install gcc gcc-arm-none-eabi git-core
rustup toolchain install nightly
rustup update
rustup target add thumbv7em-none-eabihf --toolchain nightly
rustup default nightly
rustup component add rust-src
cargo install cargo-xbuild
git clone https://github.com/llvm/llvm-project.git
export RUST_COMPILER_RT_ROOT=`pwd`/llvm-project/compiler-rt
cd firmware && cargo xbuild --release
```
The built ELF file will be at `target/thumbv7em-none-eabihf/release/ionpak-firmware`
### Development build on NixOS
Requires NixOS 19.09 or later for cargo-xbuild.
```shell
nix-shell --run "cd firmware && cargo xbuild --release"
```
2019-09-14 22:59:21 +08:00
## Network
### Setup
Ethernet, IP: 192.168.1.26/24
Use telnet or netcat to connect to port 23/tcp (telnet)
### Reading ADC input
Set report mode to `once` to obtain the single next value. Report mode
will turn itself off after the next reading.
Set report mode to `continuous` for a continuous stream of input data.
The scope of this setting is per TCP session.
### Commands
2019-09-18 01:09:47 +08:00
| Syntax | Function |
| --- | --- |
| `report` | Show current input |
| `report mode` | Show current report mode |
| `report mode <off or on>` | Set report mode |
| `pwm <width> <total>` | Set PWM duty cycle to manual *width / total* |
| `pwm pid` | Set PWM to be controlled by PID |
| `pid target <value>` | |
| `pid kp <value>` | |
| `pid ki <value>` | |
| `pid kd <value>` | |
| `pid output_min <value>` | |
| `pid output_max <value>` | |
| `pid integral_min <value>` | |
| `pid integral_max <value>` | |