MQTT-controlled 4-channel DDS signal generator using Urukul, Humpback and STM32 NUCLEO

Go to file

occheung 171ce942c3 ethernet: handle exit		2020-09-02 17:23:03 +08:00
.cargo	tcp_client: init	2020-09-02 11:00:04 +08:00
examples	ethernet: handle exit	2020-09-02 17:23:03 +08:00
gdb_config	gdb_config: less destructive flash reset	2020-08-20 11:18:33 +08:00
migen	migen: replace ethernet conflict pin	2020-08-24 10:57:37 +08:00
nix	nmigen: purgred nmigen nix config	2020-08-12 12:45:19 +08:00
src	nal: use minimq example	2020-09-01 17:41:40 +08:00
.gitignore	gitignore: migrated	2020-08-07 13:08:40 +08:00
Cargo.toml	tcp_client: init	2020-09-02 11:00:04 +08:00
memory.x	rust: migrated	2020-08-07 13:36:00 +08:00
README.md	readme: rm issue	2020-09-01 15:06:09 +08:00
shell.nix	migen: fix lvds input	2020-08-21 11:17:08 +08:00

Firmware development

RF signal generator using Urukul, Humpback and STM32

Nix commands

Open nix shell before anything.

nix-shell

Start OpenOCD server in unblocking mode.

run-openocd

Start OpenOCD server in blocking mode, for console print through semihosting.

run-openocd-block

Reset STM32 flash before flashing bitstream for Humpback FPGA.

reset-flash

Load bitstream to Humpback FPGA.

configure-fpga

Verify a proper bitstream is loaded to STM32 flash.

verify-fpga-config

Run a Ethernet server with TCP socket examples.

run-ethernet-server

Select a different gdb config file from gdb_config directory.

set-gdb-config-file <filename>

Leave as blank for default openocd.gdb configuration.