whitequark
e285fe0d56
test: tighten required TransferTest timings.
...
smoltcp performs significantly better with LTO.
2018-08-12 20:17:37 +00:00
whitequark
46bd96abd1
artiq_devtool: make kasli-tester the default configuration.
2018-08-12 19:17:45 +00:00
whitequark
38d60100ff
firmware: optimize dma_record_output.
...
This removes a number of bounds checks and adds a fast path for
outputting exactly one word to DMA, which is the most common
operation.
2018-08-12 19:17:45 +00:00
whitequark
bdd18de2c1
firmware: globally enable LTO.
...
This used to crash with earlier rustc versions, but doesn't anymore,
and gives significant speedup (e.g. 2x on test_dma_record_time).
2018-08-12 19:17:45 +00:00
whitequark
2648b1b7a1
firmware: migrate to Rust 1.28.0.
...
This also updates / is a prerequisite for updating smoltcp.
Rationale for changes made:
* compiler_builtins is now shipped in the rust prefix.
* rustc's libpanic_unwind no longer works for us because it
has a hard dependency on Box (and it's a horrible hack);
fortunately, we only ever needed a personality function
from it.
* panic and oom handlers are now set in a completely different
way.
* allocators are quite different (and finally stable).
* NLL caused internal compiler errors in runtime, so code using
NLL was rewritten to not rely on it and it was turned off.
2018-08-12 19:17:45 +00:00
d2e47844dd
nix: fixes
2018-08-12 21:20:02 +08:00
Stewart Mackenzie
e48d440fd4
Problem: ARTIQ setup via conda or src is complex
...
Solution: Provide a single command to download, compile and install
dependencies.
2018-08-12 13:04:40 +00:00
738d2c6bcb
hmc7043: REFSYNCIN → RFSYNCIN
2018-08-11 12:07:17 +08:00
bc3e715a8f
examples: fix kasli_tester
2018-08-11 10:51:42 +08:00
whitequark
fab6e5cdff
compiler: skip functional values in attribute writeback.
...
Fixes #1088 .
2018-08-10 12:02:49 +00:00
052e400f12
test: skip test_dma_playback_time on Kasli ( #946 )
2018-08-09 18:08:21 +08:00
957645a7e7
examples: move kasli tester out of kasli_basic
2018-08-09 18:07:44 +08:00
bbc98410e4
test: dds → ad9914dds
...
Prevent confusion with Urukul.
2018-08-09 16:55:09 +08:00
bf78e0c7d2
test: fix handling of missing devices
2018-08-09 16:51:12 +08:00
a061ba2505
grabber/kasli_basic: add grabber test
...
close #1121
2018-08-08 12:43:44 +02:00
f7678cc24a
grabber: refactor state machine
2018-08-07 18:07:46 +02:00
6cd2432e30
grabber: log all resolution changes
...
close #1120
2018-08-07 16:21:21 +02:00
99a15ca0c6
grabber: rationalize derived traits
2018-08-07 16:21:21 +02:00
49f7a1610f
sayma: use GTP_CLK1 only for all variants ( #1080 )
2018-08-07 20:53:14 +08:00
e2a49ce368
drtio: support external IBUFDS_GTE3
2018-08-07 20:52:45 +08:00
8b8e1844f0
kasli_sawgmaster: roughly match Urukul and Sayma amplitudes
2018-08-07 20:07:21 +08:00
9ce6233926
kasli: fix SYSU TTL directions
2018-08-07 19:29:28 +08:00
8aa88cfe70
kasli_sawgmaster: add Urukul-Sayma example
2018-08-07 19:29:28 +08:00
474bc7b65b
browser: handle windows file urls for feeding h5py
...
close #1014
2018-08-07 12:57:01 +02:00
whitequark
93af5d2a03
compiler: handle async RPC as last statement in try block.
...
Fixes #1107 .
2018-08-07 07:06:53 +00:00
whitequark
7bd7b6592a
rpc_proto: serialize keywords correctly.
...
Fixes #1109 .
2018-08-07 06:47:09 +00:00
whitequark
259f1576c3
Fix tests after a74958f0.
2018-08-07 06:06:49 +00:00
whitequark
a74958f01f
ksupport: raise RuntimeError on reraise with no inflight exception.
...
Fixes #1123 .
2018-08-07 05:53:13 +00:00
2008d02f4d
runtime: use different default IP and MAC for different kinds of boards
...
This helps reduce conflicts when having many boards on a development network.
2018-08-07 10:30:50 +08:00
bbe36b94f7
ad9154: enable sync in init
2018-08-06 19:02:27 +08:00
7f0b2ff594
jesd204sync: work around HMC7043 poor behavior with combined delays
...
The HMC7043 outputs poorly controlled signals when adjusting
two delays at once. This commit puts the DAC in one-shot SYSREF mode,
and only triggers synchronizations when SYSREF is stable.
2018-08-06 17:43:17 +08:00
f32f0126e2
Revert "ad9154: use continuous sync mode"
...
The HMC7043 is not really glitchless.
This reverts commit bd968211de
2018-08-06 16:59:53 +08:00
65f198bdee
kasli: use tester EEMs for DRTIO, add Urukul-Sayma sync example
2018-08-06 16:53:13 +08:00
bd968211de
ad9154: use continuous sync mode
2018-08-06 00:27:10 +08:00
b023865b42
sayma: instantiate dummy IBUFDS_GTE3 on unused but driven Si5324 clock pins
...
Solve same problem as e83ee3a0
2018-08-05 23:02:41 +08:00
e83ee3a07a
hmc7043: disable GTP_CLK1 when not in use
...
Termination and biasing are not active at the FPGA when IBUFDS_GTE3 is
not instantiated, and driving a clock then leads to overvoltage.
2018-08-03 10:03:52 +08:00
6fc8439399
tweak moninj to allow old dashboard with new firmware
2018-08-02 19:34:14 +08:00
04cbc3237b
test_moninj: test injection monitoring
2018-08-02 19:34:14 +08:00
47740c8930
share moninj injection state between dashboards
...
Previously if one dashboard overrode a channel this was not visible on
any other dashboard - the channel appeared to operate normally.
2018-08-02 19:34:14 +08:00
7d6a1b528d
ad9912: add ftw_to_frequency
2018-08-02 11:19:12 +00:00
e518a1f1d0
ad53xx: also increase slack after control readback
2018-08-02 11:19:12 +00:00
whitequark
5871d13da8
firmware: actually compact in config::compact().
...
Fixes #1116 .
2018-08-01 16:27:48 +00:00
David Nadlinger
829fca6112
pyon: Correctly deserialize bare NaNs
...
This also fixes (non-numpy) lists containing NaNs.
Previously, accidentally storing a NaN in a dataset would
bring down large parts of the system.
2018-07-30 11:08:56 +01:00
David Nadlinger
08ee91beb2
ad9910: Clarify chip_select range [nfc]
...
`assert 3 <= chip_select <= 7` is rather opaque without looking
at the CPLD source code otherwise.
2018-07-30 11:08:17 +01:00
David Nadlinger
6b89106578
ad53xx: Avoid sporadic RTIOUnderflow in init()
...
I observed sporadic RTIO underflows on Kasli before, by ~2.5 µs,
so 5 µs extra slack should be plenty. No underflows since.
2018-07-28 23:45:48 +01:00
c00eb181fc
conda: bump jesd204b
2018-07-28 13:17:44 +08:00
e4d48a78eb
drtio: wait for remote to ack TSC synchronization
...
Sayma takes a long time after TSC sync to align SYSREF, and this caused two issues:
1. Aux packets getting lost and causing error reports
2. DRTIO links reported up and kernels proceeding despite the DACs not being properly synced.
2018-07-26 20:28:17 +08:00
83de8b2ba2
drtio: add ping timeout during link init
2018-07-26 20:27:53 +08:00
446f791180
firmware: simplify SYSREF DRTIO alignment
2018-07-26 19:37:59 +08:00
f8c17528e7
satman: use new SYSREF code
2018-07-26 16:26:57 +08:00
