Sebastien Bourdeauducq
d7ad72efa2
doc: point to artiq_flash hardware selection options when writing flash storage. Closes #766
2017-07-02 10:40:52 +08:00
Sebastien Bourdeauducq
9ab63920e0
Remove Pipistrello support
...
Closes #658
Closes #381
2017-05-15 17:17:44 +08:00
Sebastien Bourdeauducq
99196986c0
conda: use conda-forge and depend on pyqtgraph 0.10.0 ( #704 )
2017-04-13 00:55:16 +08:00
Robert Jördens
3f556a3f58
doc: remove qt5 note
2017-02-28 13:22:47 +01:00
Robert Jördens
5a30536d59
doc: write section on developing with a conda env
2017-02-02 19:53:18 +01:00
e5085c063f
doc: test mode was removed, clean up.
2017-01-24 22:25:21 +00:00
Robert Jördens
f7e8961ab0
Merge branch 'master' into phaser
...
* master: (23 commits)
RELEASE_NOTES: update
pipistrello: add some inputs
Remove last vestiges of nist_qc1.
Fully drop AD9858 and kc705-nist_qc1 support (closes #576 ).
coredevice.dds: reimplement fully in ARTIQ Python.
compiler: unbreak casts to int32/int64.
analyses.constness: fix false positive on x[...].
inferencer: significantly improve the op-assignment diagnostic.
Fix tests.
Move mu_to_seconds, seconds_to_mu to Core.
artiq_devtool: don't crash on invalid utf-8.
artiq_devtool: detect a race condition during connect.
llvm_ir_generator: handle no-op coercions.
conda: use development version of migen/misoc
Revert accidentally committed code.
Revert "gateware: increase RTIO FIFO sizes for NIST_CLOCK. Closes #623 "
analyses.invariant_detection: implement (#622 ).
Fix whitespace.
coredevice.dds: work around the round(numpy.float64()) snafu.
coredevice.dds: update from obsolete int(width=) syntax (fixes #621 ).
...
2016-11-21 17:29:39 +01:00
6aa5d9f6c6
Remove last vestiges of nist_qc1.
2016-11-21 15:36:22 +00:00
5e8888d5f3
Fully drop AD9858 and kc705-nist_qc1 support ( closes #576 ).
2016-11-21 15:14:17 +00:00
Robert Jördens
4a0eaf0f95
phaser: add jesd204b rtio dds
...
gateware: add jesd204b awg
gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce
sawg: kernel support and docs
sawg: coredevice api fixes
sawg: example ddb/experiment
phaser: add conda package
examples/phaser: typo
sawg: adapt tests, fix accu stb
sawg: tweak dds parameters
sawg: move/adapt/extend tests
sawg: test phy, refactor
phaser: non-rtio spi
phaser: target cli update
phaser: ad9154-fmc-ebz pins
phaser: reorganize fmc signal naming
phaser: add test mode stubs
phaser: txen is LVTTL
phaser: clk spi xfer test
phaser: spi for ad9154 and ad9516
phaser: spi tweaks
ad9154: add register map from ad9144.xml
ad9516: add register map from ad9517.xml and manual adaptation
ad9154_reg: just generate getter/setter macros as well
ad9154: reg WIP
ad9154: check and fix registers
kc705: single ended rtio_external_clk
use single ended user_sma_clk_n instead of p/n to free up one clock sma
kc705: mirror clk200 at user_sma_clock_p
ad9516_regs.h: fix B_COUNTER_MSB
phase: wire up clocking differently
needs patched misoc
kc705: feed rtio_external_clock directly
kc705: remove rtio_external_clk for phaser
phaser: spi tweaks
ad9516: some startup
ad9516_reg fixes
phaser: setup ad9516 for supposed 500 MHz operation
ad9516: use full duplex spi
ad9154_reg: add CONFIG_REG_2
ad9154_reg: fixes
phaser: write some ad9154 config
ad9154_reg: fixes
ad9154: more init, and human readable setup
ad9154/ad9516: merge spi support
ad9154: status readout
Revert "kc705: remove rtio_external_clk for phaser"
This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.
Revert "kc705: feed rtio_external_clock directly"
This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.
Revert "phase: wire up clocking differently"
This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.
Revert "kc705: mirror clk200 at user_sma_clock_p"
This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.
Revert "kc705: single ended rtio_external_clk"
This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.
ad9516: 2000 MHz clock
phaser: test clock dist
phaser: test freqs
ad9154: iostandards
phaser: drop clock monitor
phaser: no separate i2c
phaser: drive rtio from refclk, wire up sysref
phaser: ttl channel for sync
ad9154: 4x interp, status, tweaks
phaser: sync/sysref 33V banks
phaser: sync/sysref LVDS_25 inputs are VCCO tolerant
phaser: user input-only ttls
phaser: rtio fully from refclk
ad9154: reg name usage fix
ad9154: check register modifications
Revert "ad9154: check register modifications"
This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.
ad9154: fix status code
ad9154: addrinc, recal serdes pll
phaser: coredevice, example tweaks
sawg: missing import
sawg: type fixes
ad9514: move setup functions
ad9154: msb first also decreasing addr
phaser: use sys4x for rtio internal ref
phaser: move init code to main
phaser: naming cleanup
phaser: cleanup pins
phaser: move spi to kernel cpu
phaser: kernel support for ad9154 spi
ad9154: add r/w methods
ad9154: need return annotations
ad9154: r/w methods are kernels
ad9154_reg: portable helpers
phaser: cleanup startup kernel
ad9154: status test
ad9154: prbs test
ad9154: move setup, document
phaser: more documentation
2016-10-05 16:17:50 +02:00
Sebastien Bourdeauducq
3befe37221
manual: minor cleanup
2016-06-22 10:01:56 +08:00
Sebastien Bourdeauducq
48c0812df0
manual: split source install instructions to a separate page
2016-06-22 09:45:56 +08:00
284e0d6876
doc: update installing.rst to reflect openocd packaged in conda.
2016-06-04 07:53:53 +00:00
Sebastien Bourdeauducq
e8aadd0a1a
doc: document common KC705 problems. Closes #450
2016-06-03 23:20:38 -04:00
Sebastien Bourdeauducq
e98fdfa7ca
manual/installing: mention netmask and gateway. Closes #441
2016-05-25 10:32:36 -05:00
Sebastien Bourdeauducq
faa268e814
manual/installing: --toolchain vivado
2016-04-14 01:25:36 +08:00
Sebastien Bourdeauducq
6fc73a0256
manual/installing: -H nist_...
2016-04-14 01:20:13 +08:00
Sebastien Bourdeauducq
56af4e9147
doc/installing: add note about example dependencies
2016-04-11 17:03:49 +08:00
Robert Jördens
36c1fdb5ad
installing.rst: typo
2016-04-10 21:01:00 +08:00
Robert Jördens
62eae5eb34
installing.rst: adapters renaming from ed1c368
2016-04-10 11:21:09 +08:00
Robert Jördens
7f7750eef2
installing.rst: triple colons
2016-04-10 11:17:45 +08:00
Robert Jördens
26f55f2010
installing.rst: update, clarify
2016-04-09 23:58:11 +08:00
32102bc25f
doc: use proper CMAKE_BUILD_TYPE for LLVM.
...
Fixes #380 .
2016-04-06 22:05:55 +00:00
Sebastien Bourdeauducq
eb68ab9ad0
doc: remote execution
2016-04-06 19:13:41 +08:00
Sebastien Bourdeauducq
7453d85d5e
GUI -> dashboard
2016-04-04 22:12:45 +08:00
Robert Jördens
c6516f3c83
doc: conda channel -> label
2016-03-31 10:29:07 +02:00
Robert Jördens
d561681cc1
doc: add note about xcb ( closes #361 )
2016-03-31 10:28:57 +02:00
Sebastien Bourdeauducq
4c622194c2
doc: update flterm instructions. Closes #346
2016-03-25 20:10:53 +08:00
Robert Jördens
22cd12f721
doc: correctly place the openocd section, link it, add explanation
2016-03-20 20:19:12 +01:00
d069380f6b
Fix typo. And in build of openocd on Ubuntu the aclocal dependency is provided by automake.
...
adduser requires root
conda installation requires user to build OpenOCD by hand.
2016-03-20 20:18:32 +01:00
Robert Jördens
8e41d50145
doc: add pipistrello adapter explicitly ( closes : #339 )
2016-03-20 19:57:07 +01:00
Robert Jördens
8fa98f6486
doc: use term 'gateware'
...
FPGA newcomers are not used to the term 'bitstream'. To insist that this file
is the result of the gateware compilation and thus the binary FPGA format,
add the term 'gateware' as a prefix.
2016-02-29 20:50:45 +01:00
Sebastien Bourdeauducq
d0d56bd3fe
doc: update install instructions
2016-03-01 00:19:55 +08:00
Sebastien Bourdeauducq
be6b64a243
doc: fix conda install instructions
2016-02-22 17:52:18 +08:00
Sebastien Bourdeauducq
14683f297a
doc: remove 'Ubuntu 15.10+/Debian jessie+ specific instructions'. Closes #282
2016-02-22 12:08:22 +08:00
3da9bfc704
doc: binutils patch is not needed any more.
2016-02-15 18:25:15 +00:00
Sebastien Bourdeauducq
b68035d162
manual/installing: refresh
2016-02-10 23:37:21 +01:00
Sebastien Bourdeauducq
028ed72b72
doc: typo
2016-01-07 10:06:43 +08:00
Robert Jördens
0bbe886669
doc/manual: umask warning and openocd installation refinement
2016-01-06 13:12:42 -07:00
Robert Jördens
358ad2e927
artiq_flash: drop redundant instruction, tweak doc
2016-01-06 11:24:05 -07:00
Robert Jördens
25ce0928bd
build/doc: simplify proxy bitstream locations
2016-01-05 10:23:50 -07:00
Robert Jördens
d633c8e1f8
doc: update and cleanup flashing/installing/building
2016-01-05 10:21:34 +08:00
Sebastien Bourdeauducq
5f3b69dd19
frontend/coreconfig: simplify action names
2015-12-24 18:54:23 +08:00
Sebastien Bourdeauducq
179c50480f
frontend: split coretool into coreconfig, corelog and coreanalyzer
2015-12-24 18:51:11 +08:00
Sebastien Bourdeauducq
7548229910
doc/manual/installing: remove outdated note
2015-12-11 10:32:01 +08:00
8b4b269371
doc/manual/installing: fix a bug, add Fedora specific instructions
...
Signed-off-by: Felix Held <felix-artiq@felixheld.de>
2015-11-21 10:23:58 +08:00
51f04f6311
Explicitly use the python3.5 binary everywhere.
2015-11-07 13:39:39 +03:00
Sebastien Bourdeauducq
b13ee2ed8f
doc: update compilation instructions
2015-11-04 23:38:24 +08:00
Sebastien Bourdeauducq
73fed53c09
manual: document startup clock and kernel
2015-11-01 00:24:44 +08:00
ff93e3c149
manual: update installing.rst to elaborate QC1/QC2 differences.
2015-10-30 05:07:01 +03:00
Sebastien Bourdeauducq
Robert Jördens
whitequark
Joe Britton
Felix Held