mirror of https://github.com/m-labs/artiq.git
drtio: add GTH transceiver code from Florent (197c79d47)
This commit is contained in:
parent
ebdbaaad32
commit
77897228ca
|
|
@ -0,0 +1,113 @@
|
|||
from math import ceil
|
||||
from functools import reduce
|
||||
from operator import add
|
||||
|
||||
from litex.gen import *
|
||||
from litex.gen.genlib.cdc import MultiReg, PulseSynchronizer
|
||||
|
||||
|
||||
# Changes the phase of the transceiver RX clock to align the comma to
|
||||
# the LSBs of RXDATA, fixing the latency.
|
||||
#
|
||||
# This is implemented by repeatedly resetting the transceiver until it
|
||||
# gives out the correct phase. Each reset gives a random phase.
|
||||
#
|
||||
# If Xilinx had designed the GTX transceiver correctly, RXSLIDE_MODE=PMA
|
||||
# would achieve this faster and in a cleaner way. But:
|
||||
# * the phase jumps are of 2 UI at every second RXSLIDE pulse, instead
|
||||
# of 1 UI at every pulse. It is unclear what the latency becomes.
|
||||
# * RXSLIDE_MODE=PMA cannot be used with the RX buffer bypassed.
|
||||
# Those design flaws make RXSLIDE_MODE=PMA yet another broken and useless
|
||||
# transceiver "feature".
|
||||
#
|
||||
# Warning: Xilinx transceivers are LSB first, and comma needs to be flipped
|
||||
# compared to the usual 8b10b binary representation.
|
||||
class BruteforceClockAligner(Module):
|
||||
def __init__(self, comma, tx_clk_freq, check_period=6e-3):
|
||||
self.rxdata = Signal(20)
|
||||
self.restart = Signal()
|
||||
|
||||
self.ready = Signal()
|
||||
|
||||
check_max_val = ceil(check_period*tx_clk_freq)
|
||||
check_counter = Signal(max=check_max_val+1)
|
||||
check = Signal()
|
||||
reset_check_counter = Signal()
|
||||
self.sync.rtio_tx += [
|
||||
check.eq(0),
|
||||
If(reset_check_counter,
|
||||
check_counter.eq(check_max_val)
|
||||
).Else(
|
||||
If(check_counter == 0,
|
||||
check.eq(1),
|
||||
check_counter.eq(check_max_val)
|
||||
).Else(
|
||||
check_counter.eq(check_counter-1)
|
||||
)
|
||||
)
|
||||
]
|
||||
|
||||
checks_reset = PulseSynchronizer("rtio_tx", "rtio_rx")
|
||||
self.submodules += checks_reset
|
||||
|
||||
comma_n = ~comma & 0b1111111111
|
||||
comma_seen_rxclk = Signal()
|
||||
comma_seen = Signal()
|
||||
comma_seen_rxclk.attr.add("no_retiming")
|
||||
self.specials += MultiReg(comma_seen_rxclk, comma_seen)
|
||||
self.sync.rtio_rx += \
|
||||
If(checks_reset.o,
|
||||
comma_seen_rxclk.eq(0)
|
||||
).Elif((self.rxdata[:10] == comma) | (self.rxdata[:10] == comma_n),
|
||||
comma_seen_rxclk.eq(1)
|
||||
)
|
||||
|
||||
error_seen_rxclk = Signal()
|
||||
error_seen = Signal()
|
||||
error_seen_rxclk.attr.add("no_retiming")
|
||||
self.specials += MultiReg(error_seen_rxclk, error_seen)
|
||||
rx1cnt = Signal(max=11)
|
||||
self.sync.rtio_rx += [
|
||||
rx1cnt.eq(reduce(add, [self.rxdata[i] for i in range(10)])),
|
||||
If(checks_reset.o,
|
||||
error_seen_rxclk.eq(0)
|
||||
).Elif((rx1cnt != 4) & (rx1cnt != 5) & (rx1cnt != 6),
|
||||
error_seen_rxclk.eq(1)
|
||||
)
|
||||
]
|
||||
|
||||
fsm = ClockDomainsRenamer("rtio_tx")(FSM(reset_state="WAIT_COMMA"))
|
||||
self.submodules += fsm
|
||||
|
||||
fsm.act("WAIT_COMMA",
|
||||
If(check,
|
||||
# Errors are still OK at this stage, as the transceiver
|
||||
# has just been reset and may output garbage data.
|
||||
If(comma_seen,
|
||||
NextState("WAIT_NOERROR")
|
||||
).Else(
|
||||
self.restart.eq(1)
|
||||
),
|
||||
checks_reset.i.eq(1)
|
||||
)
|
||||
)
|
||||
fsm.act("WAIT_NOERROR",
|
||||
If(check,
|
||||
If(comma_seen & ~error_seen,
|
||||
NextState("READY")
|
||||
).Else(
|
||||
self.restart.eq(1),
|
||||
NextState("WAIT_COMMA")
|
||||
),
|
||||
checks_reset.i.eq(1)
|
||||
)
|
||||
)
|
||||
fsm.act("READY",
|
||||
reset_check_counter.eq(1),
|
||||
self.ready.eq(1),
|
||||
If(error_seen,
|
||||
checks_reset.i.eq(1),
|
||||
self.restart.eq(1),
|
||||
NextState("WAIT_COMMA")
|
||||
)
|
||||
)
|
||||
|
|
@ -0,0 +1,453 @@
|
|||
from litex.gen import *
|
||||
from litex.gen.genlib.resetsync import AsyncResetSynchronizer
|
||||
from litex.gen.genlib.cdc import MultiReg
|
||||
|
||||
from litex.soc.interconnect.csr import *
|
||||
from litex.soc.cores.code_8b10b import Encoder, Decoder
|
||||
|
||||
from drtio.common import TransceiverInterface, ChannelInterface
|
||||
from drtio.gth_ultrascale_init import GTHInit
|
||||
from drtio.clock_aligner import BruteforceClockAligner
|
||||
|
||||
|
||||
class GTHChannelPLL(Module):
|
||||
def __init__(self, refclk, refclk_freq, linerate):
|
||||
self.refclk = refclk
|
||||
self.reset = Signal()
|
||||
self.lock = Signal()
|
||||
self.config = self.compute_config(refclk_freq, linerate)
|
||||
|
||||
@staticmethod
|
||||
def compute_config(refclk_freq, linerate):
|
||||
for n1 in 4, 5:
|
||||
for n2 in 1, 2, 3, 4, 5:
|
||||
for m in 1, 2:
|
||||
vco_freq = refclk_freq*(n1*n2)/m
|
||||
if 2.0e9 <= vco_freq <= 6.25e9:
|
||||
for d in 1, 2, 4, 8, 16:
|
||||
current_linerate = vco_freq*2/d
|
||||
if current_linerate == linerate:
|
||||
return {"n1": n1, "n2": n2, "m": m, "d": d,
|
||||
"vco_freq": vco_freq,
|
||||
"clkin": refclk_freq,
|
||||
"linerate": linerate}
|
||||
msg = "No config found for {:3.2f} MHz refclk / {:3.2f} Gbps linerate."
|
||||
raise ValueError(msg.format(refclk_freq/1e6, linerate/1e9))
|
||||
|
||||
def __repr__(self):
|
||||
r = """
|
||||
GTHChannelPLL
|
||||
==============
|
||||
overview:
|
||||
---------
|
||||
+--------------------------------------------------+
|
||||
| |
|
||||
| +-----+ +---------------------------+ +-----+ |
|
||||
| | | | Phase Frequency Detector | | | |
|
||||
CLKIN +----> /M +--> Charge Pump +-> VCO +---> CLKOUT
|
||||
| | | | Loop Filter | | | |
|
||||
| +-----+ +---------------------------+ +--+--+ |
|
||||
| ^ | |
|
||||
| | +-------+ +-------+ | |
|
||||
| +----+ /N2 <----+ /N1 <----+ |
|
||||
| +-------+ +-------+ |
|
||||
+--------------------------------------------------+
|
||||
+-------+
|
||||
CLKOUT +-> 2/D +-> LINERATE
|
||||
+-------+
|
||||
config:
|
||||
-------
|
||||
CLKIN = {clkin}MHz
|
||||
CLKOUT = CLKIN x (N1 x N2) / M = {clkin}MHz x ({n1} x {n2}) / {m}
|
||||
= {vco_freq}GHz
|
||||
LINERATE = CLKOUT x 2 / D = {vco_freq}GHz x 2 / {d}
|
||||
= {linerate}GHz
|
||||
""".format(clkin=self.config["clkin"]/1e6,
|
||||
n1=self.config["n1"],
|
||||
n2=self.config["n2"],
|
||||
m=self.config["m"],
|
||||
vco_freq=self.config["vco_freq"]/1e9,
|
||||
d=self.config["d"],
|
||||
linerate=self.config["linerate"]/1e9)
|
||||
return r
|
||||
|
||||
|
||||
class GTHQuadPLL(Module):
|
||||
def __init__(self, refclk, refclk_freq, linerate):
|
||||
self.clk = Signal()
|
||||
self.refclk = Signal()
|
||||
self.reset = Signal()
|
||||
self.lock = Signal()
|
||||
self.config = self.compute_config(refclk_freq, linerate)
|
||||
|
||||
# # #
|
||||
|
||||
self.specials += \
|
||||
Instance("GTHE3_COMMON",
|
||||
# common
|
||||
i_GTREFCLK00=refclk,
|
||||
i_GTREFCLK01=refclk,
|
||||
i_QPLLRSVD1=0,
|
||||
i_QPLLRSVD2=0,
|
||||
i_QPLLRSVD3=0,
|
||||
i_QPLLRSVD4=0,
|
||||
i_BGBYPASSB=1,
|
||||
i_BGMONITORENB=1,
|
||||
i_BGPDB=1,
|
||||
i_BGRCALOVRD=0b11111,
|
||||
i_BGRCALOVRDENB=0b1,
|
||||
i_RCALENB=1,
|
||||
|
||||
# qpll0
|
||||
p_QPLL0_FBDIV=self.config["n"],
|
||||
p_QPLL0_REFCLK_DIV=self.config["m"],
|
||||
i_QPLL0CLKRSVD0=0,
|
||||
i_QPLL0CLKRSVD1=0,
|
||||
i_QPLL0LOCKDETCLK=ClockSignal(),
|
||||
i_QPLL0LOCKEN=1,
|
||||
o_QPLL0LOCK=self.lock if self.config["qpll"] == "qpll0" else
|
||||
Signal(),
|
||||
o_QPLL0OUTCLK=self.clk if self.config["qpll"] == "qpll0" else
|
||||
Signal(),
|
||||
o_QPLL0OUTREFCLK=self.refclk if self.config["qpll"] == "qpll0" else
|
||||
Signal(),
|
||||
i_QPLL0PD=0 if self.config["qpll"] == "qpll0" else 1,
|
||||
i_QPLL0REFCLKSEL=0b001,
|
||||
i_QPLL0RESET=self.reset,
|
||||
|
||||
# qpll1
|
||||
p_QPLL1_FBDIV=self.config["n"],
|
||||
p_QPLL1_REFCLK_DIV=self.config["m"],
|
||||
i_QPLL1CLKRSVD0=0,
|
||||
i_QPLL1CLKRSVD1=0,
|
||||
i_QPLL1LOCKDETCLK=ClockSignal(),
|
||||
i_QPLL1LOCKEN=1,
|
||||
o_QPLL1LOCK=self.lock if self.config["qpll"] == "qpll1" else
|
||||
Signal(),
|
||||
o_QPLL1OUTCLK=self.clk if self.config["qpll"] == "qpll1" else
|
||||
Signal(),
|
||||
o_QPLL1OUTREFCLK=self.refclk if self.config["qpll"] == "qpll1" else
|
||||
Signal(),
|
||||
i_QPLL1PD=0 if self.config["qpll"] == "qpll1" else 1,
|
||||
i_QPLL1REFCLKSEL=0b001,
|
||||
i_QPLL1RESET=self.reset,
|
||||
)
|
||||
|
||||
@staticmethod
|
||||
def compute_config(refclk_freq, linerate):
|
||||
for n in [16, 20, 32, 40, 60, 64, 66, 75, 80, 84,
|
||||
90, 96, 100, 112, 120, 125, 150, 160]:
|
||||
for m in 1, 2, 3, 4:
|
||||
vco_freq = refclk_freq*n/m
|
||||
if 8e9 <= vco_freq <= 13e9:
|
||||
qpll = "qpll1"
|
||||
elif 9.8e9 <= vco_freq <= 16.375e9:
|
||||
qpll = "qpll0"
|
||||
else:
|
||||
qpll = None
|
||||
if qpll is not None:
|
||||
for d in 1, 2, 4, 8, 16:
|
||||
current_linerate = (vco_freq/2)*2/d
|
||||
if current_linerate == linerate:
|
||||
return {"n": n, "m": m, "d": d,
|
||||
"vco_freq": vco_freq,
|
||||
"qpll": qpll,
|
||||
"clkin": refclk_freq,
|
||||
"clkout": vco_freq/2,
|
||||
"linerate": linerate}
|
||||
msg = "No config found for {:3.2f} MHz refclk / {:3.2f} Gbps linerate."
|
||||
raise ValueError(msg.format(refclk_freq/1e6, linerate/1e9))
|
||||
|
||||
def __repr__(self):
|
||||
r = """
|
||||
GTXQuadPLL
|
||||
===========
|
||||
overview:
|
||||
---------
|
||||
+-------------------------------------------------------------++
|
||||
| +------------+ |
|
||||
| +-----+ +---------------------------+ | QPLL0 | +--+ |
|
||||
| | | | Phase Frequency Detector +-> VCO | | | |
|
||||
CLKIN +----> /M +--> Charge Pump | +------------+->/2+--> CLKOUT
|
||||
| | | | Loop Filter +-> QPLL1 | | | |
|
||||
| +-----+ +---------------------------+ | VCO | +--+ |
|
||||
| ^ +-----+------+ |
|
||||
| | +-------+ | |
|
||||
| +--------+ /N <----------------+ |
|
||||
| +-------+ |
|
||||
+--------------------------------------------------------------+
|
||||
+-------+
|
||||
CLKOUT +-> 2/D +-> LINERATE
|
||||
+-------+
|
||||
config:
|
||||
-------
|
||||
CLKIN = {clkin}MHz
|
||||
CLKOUT = CLKIN x N / (2 x M) = {clkin}MHz x {n} / (2 x {m})
|
||||
= {clkout}GHz
|
||||
VCO = {vco_freq}GHz ({qpll})
|
||||
LINERATE = CLKOUT x 2 / D = {clkout}GHz x 2 / {d}
|
||||
= {linerate}GHz
|
||||
""".format(clkin=self.config["clkin"]/1e6,
|
||||
n=self.config["n"],
|
||||
m=self.config["m"],
|
||||
clkout=self.config["clkout"]/1e9,
|
||||
vco_freq=self.config["vco_freq"]/1e9,
|
||||
qpll=self.config["qpll"].upper(),
|
||||
d=self.config["d"],
|
||||
linerate=self.config["linerate"]/1e9)
|
||||
return r
|
||||
|
||||
|
||||
class GTHSingle(Module):
|
||||
def __init__(self, pll, tx_pads, rx_pads, sys_clk_freq, dw=20, mode="master"):
|
||||
assert (dw == 20) or (dw == 40)
|
||||
assert mode in ["master", "slave"]
|
||||
|
||||
# # #
|
||||
|
||||
nwords = dw//10
|
||||
|
||||
use_cpll = isinstance(pll, GTHChannelPLL)
|
||||
use_qpll0 = isinstance(pll, GTHQuadPLL) and pll.config["qpll"] == "qpll0"
|
||||
use_qpll1 = isinstance(pll, GTHQuadPLL) and pll.config["qpll"] == "qpll1"
|
||||
|
||||
self.submodules.encoder = encoder = ClockDomainsRenamer("rtio_tx")(
|
||||
Encoder(nwords, True))
|
||||
self.submodules.decoders = decoders = [ClockDomainsRenamer("rtio_rx")(
|
||||
(Decoder(True))) for _ in range(nwords)]
|
||||
self.rx_ready = Signal()
|
||||
|
||||
self.rtio_clk_freq = pll.config["linerate"]/dw
|
||||
|
||||
# transceiver direct clock outputs
|
||||
# useful to specify clock constraints in a way palatable to Vivado
|
||||
self.txoutclk = Signal()
|
||||
self.rxoutclk = Signal()
|
||||
|
||||
# # #
|
||||
|
||||
# TX generates RTIO clock, init must be in system domain
|
||||
tx_init = GTHInit(sys_clk_freq, False)
|
||||
# RX receives restart commands from RTIO domain
|
||||
rx_init = ClockDomainsRenamer("rtio_tx")(
|
||||
GTHInit(self.rtio_clk_freq, True))
|
||||
self.submodules += tx_init, rx_init
|
||||
self.comb += [
|
||||
tx_init.plllock.eq(pll.lock),
|
||||
rx_init.plllock.eq(pll.lock)
|
||||
]
|
||||
|
||||
txdata = Signal(dw)
|
||||
rxdata = Signal(dw)
|
||||
rxphaligndone = Signal()
|
||||
self.specials += \
|
||||
Instance("GTHE3_CHANNEL",
|
||||
# Reset modes
|
||||
i_GTRESETSEL=0,
|
||||
i_RESETOVRD=0,
|
||||
|
||||
# PMA Attributes
|
||||
p_PMA_RSV1=0xf800,
|
||||
p_RX_BIAS_CFG0=0x0AB4,
|
||||
p_RX_CM_TRIM=0b1010,
|
||||
p_RX_CLK25_DIV=5,
|
||||
p_TX_CLK25_DIV=5,
|
||||
|
||||
# Power-Down Attributes
|
||||
p_PD_TRANS_TIME_FROM_P2=0x3c,
|
||||
p_PD_TRANS_TIME_NONE_P2=0x19,
|
||||
p_PD_TRANS_TIME_TO_P2=0x64,
|
||||
|
||||
# CPLL
|
||||
p_CPLL_CFG0=0x67f8,
|
||||
p_CPLL_CFG1=0xa4ac,
|
||||
p_CPLL_CFG2=0xf007,
|
||||
p_CPLL_CFG3=0x0000,
|
||||
p_CPLL_FBDIV=1 if use_qpll0 or use_qpll1 else pll.config["n2"],
|
||||
p_CPLL_FBDIV_45=4 if use_qpll0 or use_qpll1 else pll.config["n1"],
|
||||
p_CPLL_REFCLK_DIV=1 if use_qpll0 or use_qpll1 else pll.config["m"],
|
||||
p_RXOUT_DIV=pll.config["d"],
|
||||
p_TXOUT_DIV=pll.config["d"],
|
||||
i_CPLLRESET=0,
|
||||
i_CPLLPD=0 if use_qpll0 or use_qpll1 else pll.reset,
|
||||
o_CPLLLOCK=Signal() if use_qpll0 or use_qpll1 else pll.lock,
|
||||
i_CPLLLOCKEN=1,
|
||||
i_CPLLREFCLKSEL=0b001,
|
||||
i_TSTIN=2**20-1,
|
||||
i_GTREFCLK0=0 if use_qpll0 or use_qpll1 else pll.refclk,
|
||||
|
||||
# QPLL
|
||||
i_QPLL0CLK=0 if use_cpll or use_qpll1 else pll.clk,
|
||||
i_QPLL0REFCLK=0 if use_cpll or use_qpll1 else pll.refclk,
|
||||
i_QPLL1CLK=0 if use_cpll or use_qpll0 else pll.clk,
|
||||
i_QPLL1REFCLK=0 if use_cpll or use_qpll0 else pll.refclk,
|
||||
|
||||
# TX clock
|
||||
p_TXBUF_EN="FALSE",
|
||||
p_TX_XCLK_SEL="TXUSR",
|
||||
o_TXOUTCLK=self.txoutclk,
|
||||
i_TXSYSCLKSEL=0b00 if use_cpll else 0b10 if use_qpll0 else 0b11,
|
||||
i_TXPLLCLKSEL=0b00 if use_cpll else 0b11 if use_qpll0 else 0b10,
|
||||
i_TXOUTCLKSEL=0b11,
|
||||
|
||||
# TX Startup/Reset
|
||||
i_GTTXRESET=tx_init.gtXxreset,
|
||||
o_TXRESETDONE=tx_init.Xxresetdone,
|
||||
i_TXDLYSRESET=tx_init.Xxdlysreset,
|
||||
o_TXDLYSRESETDONE=tx_init.Xxdlysresetdone,
|
||||
o_TXPHALIGNDONE=tx_init.Xxphaligndone,
|
||||
i_TXUSERRDY=tx_init.Xxuserrdy,
|
||||
i_TXSYNCMODE=1,
|
||||
|
||||
# TX data
|
||||
p_TX_DATA_WIDTH=dw,
|
||||
p_TX_INT_DATAWIDTH=dw == 40,
|
||||
i_TXCTRL0=Cat(*[txdata[10*i+8] for i in range(nwords)]),
|
||||
i_TXCTRL1=Cat(*[txdata[10*i+9] for i in range(nwords)]),
|
||||
i_TXDATA=Cat(*[txdata[10*i:10*i+8] for i in range(nwords)]),
|
||||
i_TXUSRCLK=ClockSignal("rtio_tx"),
|
||||
i_TXUSRCLK2=ClockSignal("rtio_tx"),
|
||||
|
||||
# TX electrical
|
||||
i_TXPD=0b00,
|
||||
p_TX_CLKMUX_EN=1,
|
||||
i_TXBUFDIFFCTRL=0b000,
|
||||
i_TXDIFFCTRL=0b1100,
|
||||
|
||||
# RX Startup/Reset
|
||||
i_GTRXRESET=rx_init.gtXxreset,
|
||||
o_RXRESETDONE=rx_init.Xxresetdone,
|
||||
i_RXDLYSRESET=rx_init.Xxdlysreset,
|
||||
o_RXPHALIGNDONE=rxphaligndone,
|
||||
i_RXSYNCALLIN=rxphaligndone,
|
||||
i_RXUSERRDY=rx_init.Xxuserrdy,
|
||||
i_RXSYNCIN=0,
|
||||
i_RXSYNCMODE=1,
|
||||
o_RXSYNCDONE=rx_init.Xxsyncdone,
|
||||
|
||||
# RX AFE
|
||||
i_RXDFEAGCCTRL=1,
|
||||
i_RXDFEXYDEN=1,
|
||||
i_RXLPMEN=1,
|
||||
i_RXOSINTCFG=0xd,
|
||||
i_RXOSINTEN=1,
|
||||
|
||||
# RX clock
|
||||
i_RXRATE=0,
|
||||
i_RXDLYBYPASS=0,
|
||||
p_RXBUF_EN="FALSE",
|
||||
p_RX_XCLK_SEL="RXUSR",
|
||||
i_RXSYSCLKSEL=0b00,
|
||||
i_RXOUTCLKSEL=0b010,
|
||||
i_RXPLLCLKSEL=0b00,
|
||||
o_RXOUTCLK=self.rxoutclk,
|
||||
i_RXUSRCLK=ClockSignal("rtio_rx"),
|
||||
i_RXUSRCLK2=ClockSignal("rtio_rx"),
|
||||
|
||||
# RX Clock Correction Attributes
|
||||
p_CLK_CORRECT_USE="FALSE",
|
||||
p_CLK_COR_SEQ_1_1=0b0100000000,
|
||||
p_CLK_COR_SEQ_2_1=0b0100000000,
|
||||
p_CLK_COR_SEQ_1_ENABLE=0b1111,
|
||||
p_CLK_COR_SEQ_2_ENABLE=0b1111,
|
||||
|
||||
# RX data
|
||||
p_RX_DATA_WIDTH=dw,
|
||||
p_RX_INT_DATAWIDTH=dw == 40,
|
||||
o_RXCTRL0=Cat(*[rxdata[10*i+8] for i in range(nwords)]),
|
||||
o_RXCTRL1=Cat(*[rxdata[10*i+9] for i in range(nwords)]),
|
||||
o_RXDATA=Cat(*[rxdata[10*i:10*i+8] for i in range(nwords)]),
|
||||
|
||||
# RX electrical
|
||||
i_RXPD=0b00,
|
||||
p_RX_CLKMUX_EN=1,
|
||||
i_RXELECIDLEMODE=0b11,
|
||||
|
||||
# Pads
|
||||
i_GTHRXP=rx_pads.p,
|
||||
i_GTHRXN=rx_pads.n,
|
||||
o_GTHTXP=tx_pads.p,
|
||||
o_GTHTXN=tx_pads.n
|
||||
)
|
||||
|
||||
# tx clocking
|
||||
tx_reset_deglitched = Signal()
|
||||
tx_reset_deglitched.attr.add("no_retiming")
|
||||
self.sync += tx_reset_deglitched.eq(~tx_init.done)
|
||||
self.clock_domains.cd_rtio_tx = ClockDomain()
|
||||
if mode == "master":
|
||||
tx_bufg_div = pll.config["clkin"]/self.rtio_clk_freq
|
||||
assert tx_bufg_div == int(tx_bufg_div)
|
||||
self.specials += \
|
||||
Instance("BUFG_GT", i_I=self.txoutclk, o_O=self.cd_rtio_tx.clk,
|
||||
i_DIV=int(tx_bufg_div)-1)
|
||||
self.specials += AsyncResetSynchronizer(self.cd_rtio_tx, tx_reset_deglitched)
|
||||
|
||||
# rx clocking
|
||||
rx_reset_deglitched = Signal()
|
||||
rx_reset_deglitched.attr.add("no_retiming")
|
||||
self.sync.rtio_tx += rx_reset_deglitched.eq(~rx_init.done)
|
||||
self.clock_domains.cd_rtio_rx = ClockDomain()
|
||||
self.specials += [
|
||||
Instance("BUFG_GT", i_I=self.rxoutclk, o_O=self.cd_rtio_rx.clk),
|
||||
AsyncResetSynchronizer(self.cd_rtio_rx, rx_reset_deglitched)
|
||||
]
|
||||
|
||||
# tx data
|
||||
self.comb += txdata.eq(Cat(*[encoder.output[i] for i in range(nwords)]))
|
||||
|
||||
# rx data
|
||||
for i in range(nwords):
|
||||
self.comb += decoders[i].input.eq(rxdata[10*i:10*(i+1)])
|
||||
|
||||
# clock alignment
|
||||
clock_aligner = BruteforceClockAligner(0b0101111100, self.rtio_clk_freq)
|
||||
self.submodules += clock_aligner
|
||||
self.comb += [
|
||||
clock_aligner.rxdata.eq(rxdata),
|
||||
rx_init.restart.eq(clock_aligner.restart),
|
||||
self.rx_ready.eq(clock_aligner.ready)
|
||||
]
|
||||
|
||||
|
||||
class GTH(Module, TransceiverInterface):
|
||||
def __init__(self, plls, tx_pads, rx_pads, sys_clk_freq, dw, master=0):
|
||||
self.nchannels = nchannels = len(tx_pads)
|
||||
self.gths = []
|
||||
|
||||
# # #
|
||||
|
||||
nwords = dw//10
|
||||
|
||||
rtio_tx_clk = Signal()
|
||||
channel_interfaces = []
|
||||
for i in range(nchannels):
|
||||
mode = "master" if i == master else "slave"
|
||||
gth = GTHSingle(plls[i], tx_pads[i], rx_pads[i], sys_clk_freq, dw, mode)
|
||||
if mode == "master":
|
||||
self.comb += rtio_tx_clk.eq(gth.cd_rtio_tx.clk)
|
||||
else:
|
||||
self.comb += gth.cd_rtio_tx.clk.eq(rtio_tx_clk)
|
||||
self.gths.append(gth)
|
||||
setattr(self.submodules, "gth"+str(i), gth)
|
||||
channel_interface = ChannelInterface(gth.encoder, gth.decoders)
|
||||
self.comb += channel_interface.rx_ready.eq(gth.rx_ready)
|
||||
channel_interfaces.append(channel_interface)
|
||||
|
||||
TransceiverInterface.__init__(self, channel_interfaces)
|
||||
|
||||
# rtio clock domain (clock from gth tx0, ored reset from all gth txs)
|
||||
self.comb += self.cd_rtio.clk.eq(ClockSignal("gth0_rtio_tx"))
|
||||
rtio_rst = Signal()
|
||||
for i in range(nchannels):
|
||||
rtio_rst.eq(rtio_rst | ResetSignal("gth" + str(i) + "rtio_tx"))
|
||||
new_rtio_rst = Signal()
|
||||
rtio_rst = new_rtio_rst
|
||||
self.comb += self.cd_rtio.rst.eq(rtio_rst)
|
||||
|
||||
# rtio_rx clock domains
|
||||
for i in range(nchannels):
|
||||
self.comb += [
|
||||
getattr(self, "cd_rtio_rx" + str(i)).clk.eq(self.gths[i].cd_rtio_rx.clk),
|
||||
getattr(self, "cd_rtio_rx" + str(i)).rst.eq(self.gths[i].cd_rtio_rx.rst)
|
||||
]
|
||||
|
|
@ -0,0 +1,137 @@
|
|||
from math import ceil
|
||||
|
||||
from litex.gen import *
|
||||
from litex.gen.genlib.cdc import MultiReg
|
||||
from litex.gen.genlib.misc import WaitTimer
|
||||
|
||||
|
||||
class GTHInit(Module):
|
||||
def __init__(self, sys_clk_freq, rx):
|
||||
self.done = Signal()
|
||||
self.restart = Signal()
|
||||
|
||||
# GTH signals
|
||||
self.plllock = Signal()
|
||||
self.pllreset = Signal()
|
||||
self.gtXxreset = Signal()
|
||||
self.Xxresetdone = Signal()
|
||||
self.Xxdlysreset = Signal()
|
||||
self.Xxdlysresetdone = Signal()
|
||||
self.Xxphaligndone = Signal()
|
||||
self.Xxsyncdone = Signal()
|
||||
self.Xxuserrdy = Signal()
|
||||
|
||||
# # #
|
||||
|
||||
# Double-latch transceiver asynch outputs
|
||||
plllock = Signal()
|
||||
Xxresetdone = Signal()
|
||||
Xxdlysresetdone = Signal()
|
||||
Xxphaligndone = Signal()
|
||||
Xxsyncdone = Signal()
|
||||
self.specials += [
|
||||
MultiReg(self.plllock, plllock),
|
||||
MultiReg(self.Xxresetdone, Xxresetdone),
|
||||
MultiReg(self.Xxdlysresetdone, Xxdlysresetdone),
|
||||
MultiReg(self.Xxphaligndone, Xxphaligndone),
|
||||
MultiReg(self.Xxsyncdone, Xxsyncdone)
|
||||
]
|
||||
|
||||
# Deglitch FSM outputs driving transceiver asynch inputs
|
||||
gtXxreset = Signal()
|
||||
Xxdlysreset = Signal()
|
||||
Xxuserrdy = Signal()
|
||||
self.sync += [
|
||||
self.gtXxreset.eq(gtXxreset),
|
||||
self.Xxdlysreset.eq(Xxdlysreset),
|
||||
self.Xxuserrdy.eq(Xxuserrdy)
|
||||
]
|
||||
|
||||
# PLL reset must be at least 2us
|
||||
pll_reset_cycles = ceil(2000*sys_clk_freq/1000000000)
|
||||
pll_reset_timer = WaitTimer(pll_reset_cycles)
|
||||
self.submodules += pll_reset_timer
|
||||
|
||||
startup_fsm = ResetInserter()(FSM(reset_state="RESET_ALL"))
|
||||
self.submodules += startup_fsm
|
||||
|
||||
ready_timer = WaitTimer(int(sys_clk_freq/1000))
|
||||
self.submodules += ready_timer
|
||||
self.comb += [
|
||||
ready_timer.wait.eq(~self.done & ~startup_fsm.reset),
|
||||
startup_fsm.reset.eq(self.restart | ready_timer.done)
|
||||
]
|
||||
|
||||
if rx:
|
||||
cdr_stable_timer = WaitTimer(1024)
|
||||
self.submodules += cdr_stable_timer
|
||||
|
||||
Xxphaligndone_r = Signal(reset=1)
|
||||
Xxphaligndone_rising = Signal()
|
||||
self.sync += Xxphaligndone_r.eq(Xxphaligndone)
|
||||
self.comb += Xxphaligndone_rising.eq(Xxphaligndone & ~Xxphaligndone_r)
|
||||
|
||||
startup_fsm.act("RESET_ALL",
|
||||
gtXxreset.eq(1),
|
||||
self.pllreset.eq(1),
|
||||
pll_reset_timer.wait.eq(1),
|
||||
If(pll_reset_timer.done,
|
||||
NextState("RELEASE_PLL_RESET")
|
||||
)
|
||||
)
|
||||
startup_fsm.act("RELEASE_PLL_RESET",
|
||||
gtXxreset.eq(1),
|
||||
If(plllock, NextState("RELEASE_GTH_RESET"))
|
||||
)
|
||||
# Release GTH reset and wait for GTH resetdone
|
||||
# (from UG476, GTH is reset on falling edge
|
||||
# of gtXxreset)
|
||||
if rx:
|
||||
startup_fsm.act("RELEASE_GTH_RESET",
|
||||
Xxuserrdy.eq(1),
|
||||
cdr_stable_timer.wait.eq(1),
|
||||
If(Xxresetdone & cdr_stable_timer.done, NextState("ALIGN"))
|
||||
)
|
||||
else:
|
||||
startup_fsm.act("RELEASE_GTH_RESET",
|
||||
Xxuserrdy.eq(1),
|
||||
If(Xxresetdone, NextState("ALIGN"))
|
||||
)
|
||||
# Start delay alignment (pulse)
|
||||
startup_fsm.act("ALIGN",
|
||||
Xxuserrdy.eq(1),
|
||||
Xxdlysreset.eq(1),
|
||||
NextState("WAIT_ALIGN")
|
||||
)
|
||||
if rx:
|
||||
# Wait for delay alignment
|
||||
startup_fsm.act("WAIT_ALIGN",
|
||||
Xxuserrdy.eq(1),
|
||||
If(Xxsyncdone,
|
||||
NextState("READY")
|
||||
)
|
||||
)
|
||||
else:
|
||||
# Wait for delay alignment
|
||||
startup_fsm.act("WAIT_ALIGN",
|
||||
Xxuserrdy.eq(1),
|
||||
If(Xxdlysresetdone,
|
||||
NextState("WAIT_FIRST_ALIGN_DONE")
|
||||
)
|
||||
)
|
||||
|
||||
# Wait 2 rising edges of Xxphaligndone
|
||||
# (from UG576 in TX Buffer Bypass in Single-Lane Auto Mode)
|
||||
startup_fsm.act("WAIT_FIRST_ALIGN_DONE",
|
||||
Xxuserrdy.eq(1),
|
||||
If(Xxphaligndone_rising, NextState("WAIT_SECOND_ALIGN_DONE"))
|
||||
)
|
||||
startup_fsm.act("WAIT_SECOND_ALIGN_DONE",
|
||||
Xxuserrdy.eq(1),
|
||||
If(Xxphaligndone_rising, NextState("READY"))
|
||||
)
|
||||
startup_fsm.act("READY",
|
||||
Xxuserrdy.eq(1),
|
||||
self.done.eq(1),
|
||||
If(self.restart, NextState("RESET_ALL"))
|
||||
)
|
||||
Loading…
Reference in New Issue