rtio_clocking: switch clocks and reboot

This commit is contained in:
mwojcik 2022-10-28 17:31:34 +08:00 committed by Sébastien Bourdeauducq
parent f8eb695c0f
commit 5cd57e8688
1 changed files with 49 additions and 23 deletions

View File

@ -1,8 +1,10 @@
use board_misoc::config;
#[cfg(si5324_as_synthesizer)]
use board_artiq::si5324;
#[cfg(any(soc_platform = "kasli", has_drtio))]
use board_misoc::csr;
#[cfg(has_drtio)]
use board_misoc::{csr, clock};
use board_misoc::clock;
#[derive(Debug, PartialEq)]
#[allow(non_camel_case_types)]
@ -54,9 +56,9 @@ fn get_rtio_clock_cfg() -> RtioClock {
return RtioClock::Ext0_Synth0_125to125;
#[cfg(all(rtio_frequency = "125.0", not(si5324_ext_ref)))]
return RtioClock::Int_125;
#[cfg(all(rtio_frequency = "150.0", not(si5324_ext_ref)))]
#[cfg(all(rtio_frequency = "150.0", not(si5324_ext_ref), not(soc_platform = "kasli")))]
return RtioClock::Int_150;
#[cfg(all(rtio_frequency = "100.0", not(si5324_ext_ref)))]
#[cfg(all(rtio_frequency = "100.0", not(si5324_ext_ref), not(soc_platform = "kasli")))]
return RtioClock::Int_100;
//in case nothing is set
return RtioClock::Int_125;
@ -134,7 +136,7 @@ fn setup_si5324_as_synthesizer(cfg: RtioClock) {
}
},
RtioClock::Ext0_Synth0_100to125 => { // 125MHz output, from 100MHz CLKINx reference, 586 Hz loop bandwidth
info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
info!("using 100MHz reference to make 125MHz RTIO clock with PLL");
si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
@ -147,7 +149,7 @@ fn setup_si5324_as_synthesizer(cfg: RtioClock) {
}
},
RtioClock::Ext0_Synth0_125to125 => { // 125MHz output, from 125MHz CLKINx reference, 606 Hz loop bandwidth
info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
info!("using 125MHz reference to make 125MHz RTIO clock with PLL");
si5324::FrequencySettings {
n1_hs : 5,
nc1_ls : 8,
@ -197,7 +199,7 @@ fn setup_si5324_as_synthesizer(cfg: RtioClock) {
bwsel : 4,
crystal_ref: true
}
}
},
_ => { // 125MHz output like above, default (if chosen option is not supported)
warn!("rtio_clock setting '{:?}' is not supported. Falling back to default internal 125MHz RTIO clock.", cfg);
si5324::FrequencySettings {
@ -225,10 +227,18 @@ fn setup_si5324_as_synthesizer(cfg: RtioClock) {
si5324::setup(&si5324_settings, si5324_ref_input).expect("cannot initialize Si5324");
}
pub fn init() {
let clock_cfg = get_rtio_clock_cfg();
#[cfg(si5324_as_synthesizer)]
fn setup_si5324(clock_cfg: RtioClock) {
#[cfg(soc_platform = "kasli")]
{
let switched = unsafe {
csr::crg::switch_done_read()
};
if switched == 1 {
info!("Clocking has already been set up.");
return;
}
}
#[cfg(all(soc_platform = "kasli", hw_rev = "v2.0"))]
let si5324_ext_input = si5324::Input::Ckin1;
#[cfg(all(soc_platform = "kasli", not(hw_rev = "v2.0")))]
@ -244,7 +254,23 @@ pub fn init() {
},
_ => setup_si5324_as_synthesizer(clock_cfg),
}
// switch sysclk source to si5324
#[cfg(soc_platform = "kasli")]
{
// excessive dots will be cut off by the reboot
info!("Switching sys clock, rebooting..................");
unsafe {
csr::crg::clock_sel_write(1);
}
}
}
pub fn init() {
let clock_cfg = get_rtio_clock_cfg();
#[cfg(si5324_as_synthesizer)]
setup_si5324(clock_cfg);
#[cfg(has_drtio)]
{