grabber: complete RTIO PHY, untested

artiq/gateware/rtio/phy/grabber.py

@@ -1,20 +1,94 @@
 from migen import *
+from migen.genlib.cdc import MultiReg, PulseSynchronizer
+from migen.genlib.fsm import FSM
 
 from artiq.gateware.rtio import rtlink
 from artiq.gateware.grabber import deserializer_7series
 from artiq.gateware.grabber.core import *
 
 
+__all__ = ["Grabber"]
+
+
+class Synchronizer(Module):
+    def __init__(self, roi_engines):
+        counts_in = [roi_engine.out.count for roi_engine in roi_engines]
+
+        # This assumes all ROI engines update at the same time.
+        self.update = Signal()
+        # stays valid until the next frame after self.update is pulsed.
+        self.counts = [Signal.like(count) for count in counts_in]
+
+        # # #
+
+        for count in counts_in:
+            count.attr.add("no_retiming")
+        counts_rtio = [Signal.like(count) for count in counts_in]
+        self.specials += [MultiReg(i, o, "rtio") for i, o in zip(counts_in, self.counts)]
+
+        ps = PulseSynchronizer("cl", "rtio")
+        self.submodules += ps
+        self.comb += ps.i.eq(roi_engines[0].out.update)
+        self.sync.rtio += self.update.eq(ps.o)
+
+
+class Serializer(Module):
+    def __init__(self, update, counts, rtlink_i):
+        self.gate = Signal(len(counts))
+
+        # # #
+
+        gate = Signal(len(counts))
+        sentinel = 2**(len(rtlink_i.data) - 1)
+
+        fsm = ClockDomainsRenamer("rio")(FSM())
+        self.submodules += fsm
+
+        fsm.act("INIT",
+            rtlink_i.data.eq(sentinel),
+            If(update & (self.gate != 0),
+                NextValue(gate, self.gate),
+                rtlink_i.stb.eq(1),
+                NextState(0)
+            )
+        )
+        for n, count in enumerate(counts):
+            last = n == len(counts)-1
+            fsm.act(n,
+                rtlink_i.data.eq(count),
+                rtlink_i.stb.eq(gate[n]),
+                NextState("INIT" if last else n+1)
+            )
+
+
 class Grabber(Module):
-    def __init__(self, pins):
-        self.config = rtlink.Interface(rtlink.OInterface(10))
-        self.gate_data = rtlink.Interface(rtlink.OInterface(1),
-                                          rtlink.IInterface(10))
+    def __init__(self, pins, roi_engine_count=16, res_width=12, count_shift=0):
+        self.config = rtlink.Interface(
+            rtlink.OInterface(res_width,
+                              bits_for(4*roi_engine_count-1)))
+        self.gate_data = rtlink.Interface(
+            rtlink.OInterface(roi_engine_count),
+            rtlink.IInterface(1+ROI.count_len(res_width, count_shift),
+                              timestamped=False))
 
         self.submodules.deserializer = deserializer_7series.Deserializer(pins)
         self.submodules.frequency_counter = FrequencyCounter()
-        self.submodules.parser = Parser()
+        self.submodules.parser = Parser(res_width)
         self.comb += self.parser.cl.eq(self.deserializer.q)
+        self.roi_engines = [ROI(self.parser.pix, count_shift) for _ in range(roi_engine_count)]
+        self.submodules += self.roi_engines
+        self.submodules.synchronizer = Synchronizer(self.roi_engines)
+        self.submodules.serializer = Serializer(self.synchronizer.update, self.synchronizer.counts,
+                                                self.gate_data.i)
+
+        for n, roi_engine in enumerate(self.roi_engines):
+            for offset, target in enumerate([roi_engine.cfg.x0, roi_engine.cfg.x1,
+                                             roi_engine.cfg.y0, roi_engine.cfg.y1]):
+                self.sync.rtio += If(self.config.o.stb & (self.config.o.address == 4*n+offset),
+                    target.eq(self.config.o.data))
+
+        self.sync.rio += If(self.gate_data.o.stb,
+            self.serializer.gate.eq(self.gate_data.o.data))
 
     def get_csrs(self):
         return (