topquark12 pushed to master at sinara-hw/kirdyAdapter
- 03c940af89 add box and eudyna variants
topquark12 created repository sinara-hw/kirdyAdapter
topquark12 commented on issue sinara-hw/kirdy#21
[TEST] Power suppliesThe following changes are made to the frequency compensation network: C151: 39pF -> DNP C150: 22nF -> 22nF R64 : 4k12 -> 15k Bode plot results: Phase margin: 95 deg Gain margin : 11.77…
topquark12 commented on issue sinara-hw/kirdy#21
[TEST] Power suppliesBuck regulator load step response Test condition: Base load: 1A Step load: 3A Slew rate: 2.5A/us Step duration: 1ms Test results: Undershoot: 85mV Response time: 384us Comments: -…
topquark12 commented on issue sinara-hw/kirdy#21
[TEST] Power suppliesTesting buck regulator control loop stability and response. Test condition: Load current: 3A Vout: 5V Test results: Phase margin: 93 deg Gain margin: n/a Crossover frequency: 3.6…
topquark12 commented on issue sinara-hw/kirdy#19
[TEST] Testing PD monitorFrequency response of kirdy photo diode input. Setup: Stimulus : 408 uA RMS DC bias : 1.44 mA Injected current measured through ZCP30 50MHz AC/DC current probe. Output signal measured…
topquark12 commented on issue sinara-hw/kirdy#16
[TEST] Current modulation frequency responseFrequency response of kirdy modulation input. Setup: - Gain : 25mA / V - Input : 1V p-p - DC bias : 150mA Current measured through ZCP30 50MHz AC/DC current probe. Input stimulus…
topquark12 opened issue sinara-hw/kirdy#20
[TEST] Turn on / Turn off behaviortopquark12 opened issue sinara-hw/kirdy#17
[TEST] LD Driver Current Noisetopquark12 opened issue sinara-hw/kirdy#16
[TEST] Current modulation frequency responsetopquark12 pushed to rtic at M-Labs/kirdy
- 7e314410a0 rustfmt, squash warnings, add bmp support
topquark12 pushed to rtic at M-Labs/kirdy
- c3056b8f1b broken, systemview needs implementation