svenover/artiq-zynq
1
0
Fork 0
forked from M-Labs/artiq-zynq
Code Pull Requests Activity

Compare commits

base: svenover:master
Branches Tags
svenover:master
svenover:release-7
svenover:release-6
M-Labs:master
M-Labs:release-8
M-Labs:release-7
M-Labs:release-6
..
compare: svenover:release-7
Branches Tags
svenover:master
svenover:release-7
svenover:release-6
M-Labs:master
M-Labs:release-8
M-Labs:release-7
M-Labs:release-6

33 Commits
master ... release-7

Author SHA1 Message Date
morgan
00c5ee01b0 feature: add SFP0..3 LED indication 
io_expander.rs: add virtual_led_mapping in IoExpander
                set SFP LED at .service()
kasli_soc.py: add virtual_leds csr device
              couple virtual_leds.get(i) with rx_ready status
runtime main: add async task io_expanders_service()
satman main: add io_expander service after link up/down
 2023-09-04 16:08:36 +08:00
morgan
b47152f2c2 Fix I2C I/O expander settings for VUSB_PRESENT_N on Kasli-SoC 1.1 
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
 2023-09-04 15:50:45 +08:00
morgan
5597927df9 change io_expander not to borrow i2c indefinitely 2023-08-31 14:58:00 +08:00
morgan
d019021ff5 change write_rustc_cfg_file to follow artiq repo 2023-08-31 11:54:47 +08:00
morgan
3d43bc8b15 fix compilation error when cfg has has_rtio_moninj 2023-08-31 10:26:55 +08:00
Sebastien Bourdeauducq
c4d5ab96cc flake: update dependencies 2023-07-27 11:07:15 +08:00
Sebastien Bourdeauducq
a89a7dc495 flake: update dependencies 2023-07-13 16:55:38 +08:00
Sebastien Bourdeauducq
832a861477 flake: update dependencies 2023-06-02 17:22:05 +08:00
Sebastien Bourdeauducq
201953f96b Revert "flake: update dependencies" 
This reverts commit 7aa6ddeaf2.
 2023-06-01 11:30:27 +08:00
Sebastien Bourdeauducq
7aa6ddeaf2 flake: update dependencies 2023-05-30 12:15:24 +08:00
Sebastien Bourdeauducq
b0fde30e8f Revert "flake: update dependencies" 
This reverts commit 66d80bf51a.
 2023-05-30 12:12:05 +08:00
Sebastien Bourdeauducq
66d80bf51a flake: update dependencies 2023-05-30 12:10:57 +08:00
Sebastien Bourdeauducq
6f867098b0 flake: update dependencies 2023-05-23 11:27:51 +08:00
spaqin
d51f86672a fix analyzer target for masters 2023-05-22 15:32:49 +08:00
Sebastien Bourdeauducq
6b9212525a README: update copyright year 2023-05-09 16:28:59 +08:00
Sebastien Bourdeauducq
201470485c README: update use instructions 2023-05-09 16:28:50 +08:00
Sebastien Bourdeauducq
b7c49be238 flake: update dependencies 2023-05-01 09:35:58 +08:00
Jonathan Coates
da0eedaa76 Fix mismatched signatures for the wide interface 2023-04-17 10:16:33 +08:00
mwojcik
a44a21436c qc2: add 4 edge counters to the end of rtio 2023-04-03 12:33:28 +08:00
Sebastien Bourdeauducq
e946bcc3ed kasli_soc: add fix_serdes_timing_path 2023-02-20 17:44:15 +08:00
Sebastien Bourdeauducq
4f49c58d3b flake: update dependencies 2023-02-20 17:44:07 +08:00
Egor Savkin
2a71b2fc62 satman: drive SFP TX_DISABLE 2023-02-19 16:47:24 +08:00
David Nadlinger
2ad1970004 rpc: Port over size/alignment fix for structs (tuples) with tail padding 
This ports over the following commits from the main ARTIQ repo:
 - 8740ec3dd52d85084237797881ea137492bfe070
 - dbbe8e8ed4f852e623775b7bd3aec818cdd03376
 - b9f13d48aa7e2c0652210152b971b21c3c419347
 2023-02-17 17:31:35 +08:00
Sebastien Bourdeauducq
d6bcc516cd flake: update dependencies 2023-02-17 16:49:52 +08:00
Egor Savkin
99ebc2fcdb runtime: drive SFP TX_DISABLE 
Signed-off-by: Egor Savkin <es@m-labs.hk>
 2023-02-17 16:48:51 +08:00
Egor Savkin
709aa8195b Fix idle/startup_kernel typos in config 
Signed-off-by: Egor Savkin <es@m-labs.hk>
 2023-01-03 11:03:58 +08:00
Sebastien Bourdeauducq
733f270819 flake: update dependencies 2022-10-21 19:00:12 +08:00
Sebastien Bourdeauducq
d30fb96674 examples: fix ref_multiplier 2022-10-21 18:59:32 +08:00
mwojcik
facc5808ef match ident message with mainline 2022-10-21 12:28:50 +08:00
mwojcik
6f74cff4c5 kasli_soc: ident = variant name 2022-10-21 12:28:50 +08:00
Sebastien Bourdeauducq
3ea2690f15 flake: update dependencies 2022-08-01 10:25:20 +08:00
Sebastien Bourdeauducq
e02b8e25fe README: update required versions 2022-07-09 12:28:24 +08:00
Sebastien Bourdeauducq
561efb0466 flake: switch to ARTIQ release 7 2022-07-08 18:20:49 +08:00
58 changed files with 2267 additions and 4683 deletions
Show Stats Expand all files Collapse all files

95
flake.lock generated
View File

@ -11,15 +11,16 @@
"src-pythonparser": "src-pythonparser"
},
"locked": {
"lastModified": 1693998161,
"narHash": "sha256-GbJbBQF8i0FrBOecaAGJFv+0i37wLPgy0uoeyuiq4IM=",
"ref": "refs/heads/master",
"rev": "2f3329181c2579ed77334e5875e8698a804be91d",
"revCount": 8495,
"lastModified": 1690427113,
"narHash": "sha256-10XRV7vbdyr/NKDKmBWcVs+9/iYbj6f2bulMRhwy0JY=",
"ref": "release-7",
"rev": "21c6f57ce18cdd0c41f467434d58c0b9193da374",
"revCount": 8180,
"type": "git",
"url": "https://github.com/m-labs/artiq.git"
},
"original": {
"ref": "release-7",
"type": "git",
"url": "https://github.com/m-labs/artiq.git"
}
@ -37,11 +38,11 @@
]
},
"locked": {
"lastModified": 1693473687,
"narHash": "sha256-BdLddCWbvoEyakcGwhph9b5dIU1iA0hCQV7KYgU8nos=",
"lastModified": 1664405593,
"narHash": "sha256-yP441NerlLGig7n+9xHsx8yCtZ+Ggd0VqfBSzc20E04=",
"owner": "m-labs",
"repo": "artiq-comtools",
"rev": "f522ef3dbc65961f17b2d3d41e927409d970fd79",
"rev": "15ddac62813ef623a076ccf982b3bc63d314e651",
"type": "github"
},
"original": {
@ -51,15 +52,12 @@
}
},
"flake-utils": {
"inputs": {
"systems": "systems"
},
"locked": {
"lastModified": 1692799911,
"narHash": "sha256-3eihraek4qL744EvQXsK1Ha6C3CR7nnT8X2qWap4RNk=",
"lastModified": 1659877975,
"narHash": "sha256-zllb8aq3YO3h8B/U0/J1WBgAL8EX5yWf5pMj3G0NAmc=",
"owner": "numtide",
"repo": "flake-utils",
"rev": "f9e7cf818399d17d347f847525c5a5a8032e4e44",
"rev": "c0e246b9b83f637f4681389ecabcb2681b4f3af0",
"type": "github"
},
"original": {
@ -71,11 +69,11 @@
"mozilla-overlay": {
"flake": false,
"locked": {
"lastModified": 1690536331,
"narHash": "sha256-aRIf2FB2GTdfF7gl13WyETmiV/J7EhBGkSWXfZvlxcA=",
"lastModified": 1687771476,
"narHash": "sha256-TSpqz6qYVRoqkEdOCawEQ4/cWt/4pracmvw17HK1tgE=",
"owner": "mozilla",
"repo": "nixpkgs-mozilla",
"rev": "db89c8707edcffefcd8e738459d511543a339ff5",
"rev": "3a44b8783514e7d6db4b63df96071b6c2b014b07",
"type": "github"
},
"original": {
@ -87,11 +85,11 @@
"mozilla-overlay_2": {
"flake": false,
"locked": {
"lastModified": 1690536331,
"narHash": "sha256-aRIf2FB2GTdfF7gl13WyETmiV/J7EhBGkSWXfZvlxcA=",
"lastModified": 1687771476,
"narHash": "sha256-TSpqz6qYVRoqkEdOCawEQ4/cWt/4pracmvw17HK1tgE=",
"owner": "mozilla",
"repo": "nixpkgs-mozilla",
"rev": "db89c8707edcffefcd8e738459d511543a339ff5",
"rev": "3a44b8783514e7d6db4b63df96071b6c2b014b07",
"type": "github"
},
"original": {
@ -103,11 +101,11 @@
"mozilla-overlay_3": {
"flake": false,
"locked": {
"lastModified": 1690536331,
"narHash": "sha256-aRIf2FB2GTdfF7gl13WyETmiV/J7EhBGkSWXfZvlxcA=",
"lastModified": 1684487559,
"narHash": "sha256-SZcJEM+NnLr8ctzeQf1BGAqBHzJ3jn+tdSeO7lszIJc=",
"owner": "mozilla",
"repo": "nixpkgs-mozilla",
"rev": "db89c8707edcffefcd8e738459d511543a339ff5",
"rev": "e6ca26fe8b9df914d4567604e426fbc185d9ef3e",
"type": "github"
},
"original": {
@ -118,16 +116,16 @@
},
"nixpkgs": {
"locked": {
"lastModified": 1693771906,
"narHash": "sha256-32EnPCaVjOiEERZ+o/2Ir7JH9pkfwJZJ27SKHNvt4yk=",
"lastModified": 1685573264,
"narHash": "sha256-Zffu01pONhs/pqH07cjlF10NnMDLok8ix5Uk4rhOnZQ=",
"owner": "NixOS",
"repo": "nixpkgs",
"rev": "da5adce0ffaff10f6d0fee72a02a5ed9d01b52fc",
"rev": "380be19fbd2d9079f677978361792cb25e8a3635",
"type": "github"
},
"original": {
"owner": "NixOS",
"ref": "nixos-23.05",
"ref": "nixos-22.05",
"repo": "nixpkgs",
"type": "github"
}
@ -147,11 +145,11 @@
]
},
"locked": {
"lastModified": 1693473454,
"narHash": "sha256-kr8Ur6JNW/xVRHdPn3ou980IAxg/n+f3ZQBHuJ1uaC4=",
"lastModified": 1685540542,
"narHash": "sha256-wQJwL3xc6QVQbiJrt71/Z9tp4Eq1yqdGddcEiv7sPCw=",
"owner": "m-labs",
"repo": "sipyco",
"rev": "5467dcf9738673ab9a49e6f2377bda7c551b5f90",
"rev": "f5bf2ba875340a31a135aea14ad184575ca800ac",
"type": "github"
},
"original": {
@ -163,11 +161,11 @@
"src-migen": {
"flake": false,
"locked": {
"lastModified": 1693990700,
"narHash": "sha256-qJLA03QcZ5S9DrqrseuzIQBTWS7rjAbYJxLYZEQ8rxA=",
"lastModified": 1674045327,
"narHash": "sha256-oYdeY0MbTReKbAwmSznnqw0wNawdInJoFJVWW3tesFA=",
"owner": "m-labs",
"repo": "migen",
"rev": "2cfee3e0db6fdca9b5918686ea77c93252e7cebd",
"rev": "ccaee68e14d3636e1d8fb2e0864dd89b1b1f7384",
"type": "github"
},
"original": {
@ -179,11 +177,11 @@
"src-misoc": {
"flake": false,
"locked": {
"lastModified": 1693709836,
"narHash": "sha256-YiCk05RYLzZu1CYkQ2r7XtjwVEqkUGTQn388uOls9tI=",
"lastModified": 1685415268,
"narHash": "sha256-g4+yeSV+HtWjcllM5wk4vNBUVCXtDOzUSKhxXPT7Fyc=",
"ref": "refs/heads/master",
"rev": "58dc4ee60d165ce9145cf3d904241fc154b6407f",
"revCount": 2448,
"rev": "6d48ce77b6746d3226a682790fbc95b90340986e",
"revCount": 2440,
"submodules": true,
"type": "git",
"url": "https://github.com/m-labs/misoc.git"
@ -210,21 +208,6 @@
"type": "github"
}
},
"systems": {
"locked": {
"lastModified": 1681028828,
"narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
"owner": "nix-systems",
"repo": "default",
"rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
"type": "github"
},
"original": {
"owner": "nix-systems",
"repo": "default",
"type": "github"
}
},
"zynq-rs": {
"inputs": {
"mozilla-overlay": "mozilla-overlay_3",
@ -234,11 +217,11 @@
]
},
"locked": {
"lastModified": 1693479539,
"narHash": "sha256-MppR7yxs3cjG7tQc82vX0MhyN71CJL2QWkM65F5hrFU=",
"lastModified": 1685182853,
"narHash": "sha256-bEgE8Ph7MEHQr7S+xL33CxLuIm3AqvsaxBwUE1vHTdU=",
"ref": "refs/heads/master",
"rev": "c15b54f92b3d4e125ae47a0dce7abe4b2bc9e054",
"revCount": 628,
"rev": "f20c0082645cfef34575661aeeff8d9c1ed1f127",
"revCount": 625,
"type": "git",
"url": "https://git.m-labs.hk/m-labs/zynq-rs"
},

102
flake.nix
View File

@ -1,7 +1,7 @@
{
description = "ARTIQ port to the Zynq-7000 platform";
inputs.artiq.url = git+https://github.com/m-labs/artiq.git;
inputs.artiq.url = git+https://github.com/m-labs/artiq.git?ref=release-7;
inputs.mozilla-overlay = { url = github:mozilla/nixpkgs-mozilla; flake = false; };
inputs.zynq-rs.url = git+https://git.m-labs.hk/m-labs/zynq-rs;
inputs.zynq-rs.inputs.nixpkgs.follows = "artiq/nixpkgs";
@ -12,7 +12,6 @@
zynqpkgs = zynq-rs.packages.x86_64-linux;
artiqpkgs = artiq.packages.x86_64-linux;
rust = zynq-rs.rust;
rustPlatform = zynq-rs.rustPlatform;
fastnumbers = pkgs.python3Packages.buildPythonPackage rec {
@ -38,52 +37,63 @@
ramda = pkgs.python3Packages.buildPythonPackage {
pname = "ramda";
version = "unstable-2020-04-11";
version = "unstable-2019-02-01";
src = pkgs.fetchFromGitHub {
owner = "peteut";
repo = "ramda.py";
rev = "d315a9717ebd639366bf3fe26bad9e3d08ec3c49";
sha256 = "sha256-bmSt/IHDnULsZjsC6edELnNH7LoJSVF4L4XhwBAXRkY=";
rev = "bd58f8e69d0e9a713d9c1f286a1ac5e5603956b1";
sha256 = "0qzd5yp9lbaham8p1wiymdjapzbqsli7lvngv24c3z4ybd9jlq9g";
};
nativeBuildInputs = with pkgs.python3Packages; [ pbr ];
propagatedBuildInputs = with pkgs.python3Packages; [ future fastnumbers ];
checkInputs = with pkgs.python3Packages; [ pytest ];
checkInputs = with pkgs.python3Packages; [ pytest pytest-flake8 ];
checkPhase = "pytest";
doCheck = false;
preBuild = ''
export PBR_VERSION=0.5.5
export PBR_VERSION=0.0.1
'';
};
migen-axi = pkgs.python3Packages.buildPythonPackage {
pname = "migen-axi";
version = "unstable-2023-01-06";
version = "unstable-2021-09-15";
src = pkgs.fetchFromGitHub {
owner = "peteut";
repo = "migen-axi";
rev = "27eaa84a70a3abfe1930c86c36c4de2cd652da35";
sha256 = "sha256-3Y9W5ns+1wbVd14iePzgSBzE+LxnGMUDtUw3BccFt80=";
rev = "9763505ee96acd7572280a2d1233721342dc7c3f";
sha256 = "15c7g05n183rka66fl1glzp6h7xjlpy1p6k8biry24dangsmxmvg";
};
format = "pyproject";
nativeBuildInputs = with pkgs.python3Packages; [ pbr ];
propagatedBuildInputs = with pkgs.python3Packages; [ setuptools click numpy toolz jinja2 ramda artiqpkgs.migen artiqpkgs.misoc ];
checkInputs = with pkgs.python3Packages; [ pytest-runner pytestCheckHook pytest-timeout ];
# migen/misoc version checks are broken with pyproject for some reason
postPatch = ''
substituteInPlace pyproject.toml \
--replace '"migen@git+https://github.com/m-labs/migen",' ""
substituteInPlace pyproject.toml \
--replace '"misoc@git+https://github.com/m-labs/misoc.git",' ""
# pytest-flake8 is broken with recent flake8. Re-enable after fix.
substituteInPlace setup.cfg --replace '--flake8' ""
substituteInPlace requirements.txt \
--replace "jinja2==2.11.3" "jinja2"
substituteInPlace requirements.txt \
--replace "future==0.18.2" "future"
substituteInPlace requirements.txt \
--replace "ramda==0.5.5" "ramda"
substituteInPlace requirements.txt \
--replace "colorama==0.4.3" "colorama"
substituteInPlace requirements.txt \
--replace "toolz==0.10.0" "toolz"
substituteInPlace requirements.txt \
--replace "pyserial==3.4" "pyserial"
substituteInPlace requirements.txt \
--replace "markupsafe==1.1.1" "markupsafe"
'';
checkInputs = with pkgs.python3Packages; [ pytest pytest-timeout pytest-flake8 ];
checkPhase = "pytest";
preBuild = ''
export PBR_VERSION=0.0.1
'';
};
binutils = { platform, target, zlib }: pkgs.stdenv.mkDerivation rec {
@ -118,24 +128,26 @@
fwtype = if builtins.elem variant sat_variants then "satman" else "runtime";
firmware = rustPlatform.buildRustPackage rec {
name = "firmware";
src = ./src;
cargoLock = {
lockFile = src/Cargo.lock;
outputHashes = {
"libasync-0.0.0" = "sha256-MppR7yxs3cjG7tQc82vX0MhyN71CJL2QWkM65F5hrFU=";
"libasync-0.0.0" = "sha256-xuwesRrQiccopPTCkwGqQxld74X74q7EVsKIrE0zirc=";
};
};
nativeBuildInputs = [
pkgs.gnumake
(pkgs.python3.withPackages(ps: [ ps.jsonschema artiqpkgs.migen migen-axi artiqpkgs.misoc artiqpkgs.artiq ]))
(pkgs.python3.withPackages(ps: (with artiqpkgs; [ ps.jsonschema migen migen-axi misoc artiq ])))
artiqpkgs.artiq
zynqpkgs.cargo-xbuild
pkgs.llvmPackages_9.llvm
pkgs.llvmPackages_9.clang-unwrapped
];
buildPhase = ''
export XARGO_RUST_SRC="${rust}/lib/rustlib/src/rust/library"
export XARGO_RUST_SRC="${rustPlatform.rust.rustc}/lib/rustlib/src/rust/library"
export CLANG_EXTRA_INCLUDE_DIR="${pkgs.llvmPackages_9.clang-unwrapped.lib}/lib/clang/9.0.1/include"
export CARGO_HOME=$(mktemp -d cargo-home.XXX)
make TARGET=${target} GWARGS="${if json == null then "-V ${variant}" else json}" ${fwtype}
@ -155,7 +167,8 @@
gateware = pkgs.runCommand "${target}-${variant}-gateware"
{
nativeBuildInputs = [
(pkgs.python3.withPackages(ps: [ ps.jsonschema artiqpkgs.migen migen-axi artiqpkgs.misoc artiqpkgs.artiq ]))
(pkgs.python3.withPackages(ps: (with artiqpkgs; [ ps.jsonschema migen migen-axi misoc artiq ])))
artiqpkgs.artiq
artiqpkgs.vivado
];
}
@ -239,7 +252,8 @@
name = "gateware-sim";
nativeBuildInputs = [
(pkgs.python3.withPackages(ps: [ artiqpkgs.migen migen-axi artiqpkgs.artiq ]))
(pkgs.python3.withPackages(ps: (with artiqpkgs; [ migen migen-axi artiq ])))
artiqpkgs.artiq
];
phases = [ "buildPhase" ];
@ -251,23 +265,6 @@
'';
};
fmt-check = pkgs.stdenv.mkDerivation {
name = "fmt-check";
nativeBuildInputs = [
rust
];
phases = [ "buildPhase" ];
buildPhase =
''
cd ${self}/src
cargo fmt -- --check
touch $out
'';
};
# for hitl-tests
zc706-nist_qc2 = (build { target = "zc706"; variant = "nist_qc2"; });
zc706-hitl-tests = pkgs.stdenv.mkDerivation {
@ -332,40 +329,33 @@
'';
};
in rec {
packages.x86_64-linux =
{
inherit fastnumbers artiq-netboot ramda migen-axi binutils-arm;
} //
(build { target = "zc706"; variant = "nist_clock"; }) //
packages.x86_64-linux = (build { target = "zc706"; variant = "nist_clock"; }) //
(build { target = "zc706"; variant = "nist_clock_master"; }) //
(build { target = "zc706"; variant = "nist_clock_master_100mhz"; }) //
(build { target = "zc706"; variant = "nist_clock_satellite"; }) //
(build { target = "zc706"; variant = "nist_clock_satellite_100mhz"; }) //
(build { target = "zc706"; variant = "nist_qc2"; }) //
(build { target = "zc706"; variant = "nist_qc2_master"; }) //
(build { target = "zc706"; variant = "nist_qc2_master_100mhz"; }) //
(build { target = "zc706"; variant = "nist_qc2_satellite"; }) //
(build { target = "zc706"; variant = "nist_qc2_satellite_100mhz"; }) //
(build { target = "zc706"; variant = "acpki_nist_clock"; }) //
(build { target = "zc706"; variant = "acpki_nist_clock_master"; }) //
(build { target = "zc706"; variant = "acpki_nist_clock_master_100mhz"; }) //
(build { target = "zc706"; variant = "acpki_nist_clock_satellite"; }) //
(build { target = "zc706"; variant = "acpki_nist_clock_satellite_100mhz"; }) //
(build { target = "zc706"; variant = "acpki_nist_qc2"; }) //
(build { target = "zc706"; variant = "acpki_nist_qc2_master"; }) //
(build { target = "zc706"; variant = "acpki_nist_qc2_master_100mhz"; }) //
(build { target = "zc706"; variant = "acpki_nist_qc2_satellite"; }) //
(build { target = "zc706"; variant = "acpki_nist_qc2_satellite_100mhz"; }) //
(build { target = "kasli_soc"; variant = "demo"; json = ./demo.json; }) //
(build { target = "kasli_soc"; variant = "master"; json = ./kasli-soc-master.json; }) //
(build { target = "kasli_soc"; variant = "satellite"; json = ./kasli-soc-satellite.json; });
hydraJobs = packages.x86_64-linux // { inherit zc706-hitl-tests; inherit gateware-sim; inherit fmt-check; };
hydraJobs = packages.x86_64-linux // { inherit zc706-hitl-tests; inherit gateware-sim; };
devShell.x86_64-linux = pkgs.mkShell {
name = "artiq-zynq-dev-shell";
buildInputs = with pkgs; [
rust
rustPlatform.rust.rustc
rustPlatform.rust.cargo
llvmPackages_9.llvm
llvmPackages_9.clang-unwrapped
gnumake
@ -379,7 +369,7 @@
artiqpkgs.vivado
binutils-arm
];
XARGO_RUST_SRC = "${rust}/lib/rustlib/src/rust/library";
XARGO_RUST_SRC = "${rustPlatform.rust.rustc}/lib/rustlib/src/rust/library";
CLANG_EXTRA_INCLUDE_DIR = "${pkgs.llvmPackages_9.clang-unwrapped.lib}/lib/clang/9.0.1/include";
OPENOCD_ZYNQ = "${zynq-rs}/openocd";
SZL = "${zynqpkgs.szl}";
@ -388,4 +378,4 @@
makeArtiqZynqPackage = build;
};
}
}

88
src/Cargo.lock generated
View File

@ -1,7 +1,5 @@
# This file is automatically @generated by Cargo.
# It is not intended for manual editing.
version = 3
[[package]]
name = "async-recursion"
version = "0.3.2"
@ -49,9 +47,9 @@ checksum = "14c189c53d098945499cdfa7ecc63567cf3886b3332b312a5b4585d8d3a6a610"
[[package]]
name = "cc"
version = "1.0.77"
version = "1.0.73"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "e9f73505338f7d905b19d18738976aae232eb46b8efc15554ffc56deb5d9ebe4"
checksum = "2fff2a6927b3bb87f9595d67196a70493f627687a71d87a0d692242c33f58c11"
[[package]]
name = "cfg-if"
@ -138,9 +136,9 @@ dependencies = [
[[package]]
name = "futures"
version = "0.3.25"
version = "0.3.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "38390104763dc37a5145a53c29c63c1290b5d316d6086ec32c293f6736051bb0"
checksum = "f73fe65f54d1e12b726f517d3e2135ca3125a437b6d998caf1962961f7172d9e"
dependencies = [
"futures-channel",
"futures-core",
@ -152,9 +150,9 @@ dependencies = [
[[package]]
name = "futures-channel"
version = "0.3.25"
version = "0.3.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "52ba265a92256105f45b719605a571ffe2d1f0fea3807304b522c1d778f79eed"
checksum = "c3083ce4b914124575708913bca19bfe887522d6e2e6d0952943f5eac4a74010"
dependencies = [
"futures-core",
"futures-sink",
@ -162,21 +160,21 @@ dependencies = [
[[package]]
name = "futures-core"
version = "0.3.25"
version = "0.3.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "04909a7a7e4633ae6c4a9ab280aeb86da1236243a77b694a49eacd659a4bd3ac"
checksum = "0c09fd04b7e4073ac7156a9539b57a484a8ea920f79c7c675d05d289ab6110d3"
[[package]]
name = "futures-io"
version = "0.3.25"
version = "0.3.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "00f5fb52a06bdcadeb54e8d3671f8888a39697dcb0b81b23b55174030427f4eb"
checksum = "fc4045962a5a5e935ee2fdedaa4e08284547402885ab326734432bed5d12966b"
[[package]]
name = "futures-macro"
version = "0.3.25"
version = "0.3.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "bdfb8ce053d86b91919aad980c220b1fb8401a9394410e1c289ed7e66b61835d"
checksum = "33c1e13800337f4d4d7a316bf45a567dbcb6ffe087f16424852d97e97a91f512"
dependencies = [
"proc-macro2",
"quote",
@ -185,21 +183,21 @@ dependencies = [
[[package]]
name = "futures-sink"
version = "0.3.25"
version = "0.3.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "39c15cf1a4aa79df40f1bb462fb39676d0ad9e366c2a33b590d7c66f4f81fcf9"
checksum = "21163e139fa306126e6eedaf49ecdb4588f939600f0b1e770f4205ee4b7fa868"
[[package]]
name = "futures-task"
version = "0.3.25"
version = "0.3.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "2ffb393ac5d9a6eaa9d3fdf37ae2776656b706e200c8e16b1bdb227f5198e6ea"
checksum = "57c66a976bf5909d801bbef33416c41372779507e7a6b3a5e25e4749c58f776a"
[[package]]
name = "futures-util"
version = "0.3.25"
version = "0.3.21"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "197676987abd2f9cadff84926f410af1c183608d36641465df73ae8211dc65d6"
checksum = "d8b7abd5d659d9b90c8cba917f6ec750a74e2dc23902ef9cd4cc8c8b22e6036a"
dependencies = [
"futures-core",
"futures-macro",
@ -221,7 +219,7 @@ dependencies = [
[[package]]
name = "libasync"
version = "0.0.0"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#c15b54f92b3d4e125ae47a0dce7abe4b2bc9e054"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#605c8f73a60cf41a6e2d535c5850933d3154e935"
dependencies = [
"embedded-hal",
"libcortex_a9",
@ -253,7 +251,7 @@ dependencies = [
[[package]]
name = "libboard_zynq"
version = "0.0.0"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#c15b54f92b3d4e125ae47a0dce7abe4b2bc9e054"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#605c8f73a60cf41a6e2d535c5850933d3154e935"
dependencies = [
"bit_field",
"embedded-hal",
@ -278,7 +276,7 @@ dependencies = [
[[package]]
name = "libconfig"
version = "0.1.0"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#c15b54f92b3d4e125ae47a0dce7abe4b2bc9e054"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#605c8f73a60cf41a6e2d535c5850933d3154e935"
dependencies = [
"core_io",
"fatfs",
@ -289,7 +287,7 @@ dependencies = [
[[package]]
name = "libcortex_a9"
version = "0.0.0"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#c15b54f92b3d4e125ae47a0dce7abe4b2bc9e054"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#605c8f73a60cf41a6e2d535c5850933d3154e935"
dependencies = [
"bit_field",
"libregister",
@ -298,14 +296,14 @@ dependencies = [
[[package]]
name = "libm"
version = "0.2.6"
version = "0.2.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "348108ab3fba42ec82ff6e9564fc4ca0247bdccdc68dd8af9764bbc79c3c8ffb"
checksum = "33a33a362ce288760ec6a508b94caaec573ae7d3bbbd91b87aa0bad4456839db"
[[package]]
name = "libregister"
version = "0.0.0"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#c15b54f92b3d4e125ae47a0dce7abe4b2bc9e054"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#605c8f73a60cf41a6e2d535c5850933d3154e935"
dependencies = [
"bit_field",
"vcell",
@ -315,7 +313,7 @@ dependencies = [
[[package]]
name = "libsupport_zynq"
version = "0.0.0"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#c15b54f92b3d4e125ae47a0dce7abe4b2bc9e054"
source = "git+https://git.m-labs.hk/M-Labs/zynq-rs.git#605c8f73a60cf41a6e2d535c5850933d3154e935"
dependencies = [
"cc",
"compiler_builtins",
@ -334,9 +332,9 @@ checksum = "822add9edb1860698b79522510da17bef885171f75aa395cff099d770c609c24"
[[package]]
name = "log"
version = "0.4.17"
version = "0.4.14"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "abb12e687cfb44aa40f41fc3978ef76448f9b6038cad6aef4259d3c095a2382e"
checksum = "51b9bbe6c47d51fc3e1a9b945965946b4c44142ab8792c50835a980d362c2710"
dependencies = [
"cfg-if 1.0.0",
]
@ -381,18 +379,18 @@ dependencies = [
[[package]]
name = "num-traits"
version = "0.2.15"
version = "0.2.14"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "578ede34cf02f8924ab9447f50c28075b4d3e5b269972345e7e0372b38c6cdcd"
checksum = "9a64b1ec5cda2586e284722486d802acf1f7dbdc623e2bfc57e65ca1cd099290"
dependencies = [
"autocfg",
]
[[package]]
name = "pin-project-lite"
version = "0.2.9"
version = "0.2.8"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "e0a7ae3ac2f1173085d398531c705756c94a4c56843785df85a60c1a0afac116"
checksum = "e280fbe77cc62c91527259e9442153f4688736748d24660126286329742b4c6c"
[[package]]
name = "pin-utils"
@ -402,18 +400,18 @@ checksum = "8b870d8c151b6f2fb93e84a13146138f05d02ed11c7e7c54f8826aaaf7c9f184"
[[package]]
name = "proc-macro2"
version = "1.0.43"
version = "1.0.36"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "0a2ca2c61bc9f3d74d2886294ab7b9853abd9c1ad903a3ac7815c58989bb7bab"
checksum = "c7342d5883fbccae1cc37a2353b09c87c9b0f3afd73f5fb9bba687a1f733b029"
dependencies = [
"unicode-ident",
"unicode-xid",
]
[[package]]
name = "quote"
version = "1.0.21"
version = "1.0.15"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "bbe448f377a7d6961e30f5955f9b8d106c3f5e449d493ee1b125c1d43c2b5179"
checksum = "864d3e96a899863136fc6e99f3d7cae289dafe43bf2c5ac19b70df7210c0a145"
dependencies = [
"proc-macro2",
]
@ -503,20 +501,20 @@ dependencies = [
[[package]]
name = "syn"
version = "1.0.101"
version = "1.0.86"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "e90cde112c4b9690b8cbe810cba9ddd8bc1d7472e2cae317b69e9438c1cba7d2"
checksum = "8a65b3f4ffa0092e9887669db0eae07941f023991ab58ea44da8fe8e2d511c6b"
dependencies = [
"proc-macro2",
"quote",
"unicode-ident",
"unicode-xid",
]
[[package]]
name = "unicode-ident"
version = "1.0.5"
name = "unicode-xid"
version = "0.2.2"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "6ceab39d59e4c9499d4e5a8ee0e2735b891bb7308ac83dfb4e80cad195c9f6f3"
checksum = "8ccb82d61f80a663efe1f787a51b16b5a51e3314d6ac365b08639f52387b33f3"
[[package]]
name = "unwind"

16
src/gateware/config.py
View File

@ -1,16 +0,0 @@
from misoc.integration import cpu_interface
def write_csr_file(soc, filename):
with open(filename, "w") as f:
f.write(cpu_interface.get_csr_rust(
soc.get_csr_regions(), soc.get_csr_groups(), soc.get_constants()))
def write_mem_file(soc, filename):
with open(filename, "w") as f:
f.write(cpu_interface.get_mem_rust(
soc.get_memory_regions(), soc.get_memory_groups(), None))
def write_rustc_cfg_file(soc, filename):
with open(filename, "w") as f:
f.write(cpu_interface.get_rust_cfg(
soc.get_csr_regions(), soc.get_constants()))

298
src/gateware/kasli_soc.py
View File

@ -11,11 +11,13 @@ from migen_axi.integration.soc_core import SoCCore
from migen_axi.platforms import kasli_soc
from misoc.interconnect.csr import *
from misoc.cores import virtual_leds
from misoc.integration import cpu_interface
from artiq.coredevice import jsondesc
from artiq.gateware import rtio, eem_7series
from artiq.gateware.rtio.xilinx_clocking import fix_serdes_timing_path
from artiq.gateware.rtio.phy import ttl_simple
from artiq.gateware.rtio.xilinx_clocking import fix_serdes_timing_path
from artiq.gateware.rtio.xilinx_clocking import RTIOClockMultiplier
from artiq.gateware.drtio.transceiver import gtx_7series
from artiq.gateware.drtio.siphaser import SiPhaser7Series
from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
@ -25,9 +27,57 @@ import dma
import analyzer
import acpki
import drtio_aux_controller
import zynq_clocking
from config import write_csr_file, write_mem_file, write_rustc_cfg_file
class RTIOCRG(Module, AutoCSR):
def __init__(self, platform):
self.pll_reset = CSRStorage(reset=1)
self.pll_locked = CSRStatus()
self.clock_domains.cd_rtio = ClockDomain()
self.clock_domains.cd_rtiox4 = ClockDomain(reset_less=True)
clk_synth = platform.request("cdr_clk_clean_fabric")
clk_synth_se = Signal()
platform.add_period_constraint(clk_synth.p, 8.0)
self.specials += [
Instance("IBUFGDS",
p_DIFF_TERM="TRUE", p_IBUF_LOW_PWR="FALSE",
i_I=clk_synth.p, i_IB=clk_synth.n, o_O=clk_synth_se),
]
pll_locked = Signal()
rtio_clk = Signal()
rtiox4_clk = Signal()
fb_clk = Signal()
self.specials += [
Instance("PLLE2_ADV",
p_STARTUP_WAIT="FALSE", o_LOCKED=pll_locked,
p_BANDWIDTH="HIGH",
p_REF_JITTER1=0.001,
p_CLKIN1_PERIOD=8.0, p_CLKIN2_PERIOD=8.0,
i_CLKIN2=clk_synth_se,
# Warning: CLKINSEL=0 means CLKIN2 is selected
i_CLKINSEL=0,
# VCO @ 1.5GHz when using 125MHz input
p_CLKFBOUT_MULT=12, p_DIVCLK_DIVIDE=1,
i_CLKFBIN=fb_clk,
i_RST=self.pll_reset.storage,
o_CLKFBOUT=fb_clk,
p_CLKOUT0_DIVIDE=3, p_CLKOUT0_PHASE=0.0,
o_CLKOUT0=rtiox4_clk,
p_CLKOUT1_DIVIDE=12, p_CLKOUT1_PHASE=0.0,
o_CLKOUT1=rtio_clk),
Instance("BUFG", i_I=rtio_clk, o_O=self.cd_rtio.clk),
Instance("BUFG", i_I=rtiox4_clk, o_O=self.cd_rtiox4.clk),
AsyncResetSynchronizer(self.cd_rtio, ~pll_locked),
MultiReg(pll_locked, self.pll_locked.status)
]
eem_iostandard_dict = {
0: "LVDS_25",
1: "LVDS_25",
@ -61,49 +111,6 @@ class SMAClkinForward(Module):
]
class GTPBootstrapClock(Module):
def __init__(self, platform, freq=125e6):
self.clock_domains.cd_bootstrap = ClockDomain(reset_less=True)
self.cd_bootstrap.clk.attr.add("keep")
bootstrap_125 = platform.request("clk125_gtp")
bootstrap_se = Signal()
clk_out = Signal()
platform.add_period_constraint(bootstrap_125.p, 8.0)
self.specials += [
Instance("IBUFDS_GTE2",
i_CEB=0,
i_I=bootstrap_125.p, i_IB=bootstrap_125.n,
o_O=bootstrap_se,
p_CLKCM_CFG="TRUE",
p_CLKRCV_TRST="TRUE",
p_CLKSWING_CFG=3),
Instance("BUFG", i_I=bootstrap_se, o_O=clk_out)
]
if freq == 125e6:
self.comb += self.cd_bootstrap.clk.eq(clk_out)
elif freq == 100e6:
pll_fb = Signal()
pll_out = Signal()
self.specials += [
Instance("PLLE2_BASE",
p_CLKIN1_PERIOD=8.0,
i_CLKIN1=clk_out,
i_CLKFBIN=pll_fb,
o_CLKFBOUT=pll_fb,
# VCO @ 1GHz
p_CLKFBOUT_MULT=8, p_DIVCLK_DIVIDE=1,
# 100MHz for bootstrap
p_CLKOUT1_DIVIDE=10, p_CLKOUT1_PHASE=0.0, o_CLKOUT1=pll_out,
),
Instance("BUFG", i_I=pll_out, o_O=self.cd_bootstrap.clk)
]
else:
raise ValueError("Bootstrap frequency must be 100 or 125MHz")
class GenericStandalone(SoCCore):
def __init__(self, description, acpki=False):
self.acpki = acpki
@ -115,32 +122,26 @@ class GenericStandalone(SoCCore):
ident = description["variant"]
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident, ps_cd_sys=False)
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
self.config["HW_REV"] = description["hw_rev"]
self.config["hw_rev"] = description["hw_rev"]
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
self.submodules += SMAClkinForward(self.platform)
self.config["HAS_SI5324"] = None
self.config["SI5324_SOFT_RESET"] = None
clk_synth = platform.request("cdr_clk_clean_fabric")
clk_synth_se = Signal()
platform.add_period_constraint(clk_synth.p, 8.0)
self.specials += Instance("IBUFGDS",
p_DIFF_TERM="TRUE", p_IBUF_LOW_PWR="FALSE",
i_I=clk_synth.p, i_IB=clk_synth.n, o_O=clk_synth_se)
fix_serdes_timing_path(platform)
self.submodules.bootstrap = GTPBootstrapClock(self.platform, description["rtio_frequency"])
self.submodules.sys_crg = zynq_clocking.SYSCRG(self.platform, self.ps7, clk_synth_se)
platform.add_false_path_constraints(
self.bootstrap.cd_bootstrap.clk, self.sys_crg.cd_sys.clk)
self.csr_devices.append("sys_crg")
self.crg = self.ps7 # HACK for eem_7series to find the clock
self.crg.cd_sys = self.sys_crg.cd_sys
self.submodules.rtio_crg = RTIOCRG(self.platform)
self.csr_devices.append("rtio_crg")
self.platform.add_period_constraint(self.rtio_crg.cd_rtio.clk, 8.)
self.platform.add_false_path_constraints(
self.ps7.cd_sys.clk,
self.rtio_crg.cd_rtio.clk)
fix_serdes_timing_path(platform)
self.rtio_channels = []
has_grabber = any(peripheral["type"] == "grabber" for peripheral in description["peripherals"])
@ -156,10 +157,8 @@ class GenericStandalone(SoCCore):
self.config["RTIO_LOG_CHANNEL"] = len(self.rtio_channels)
self.rtio_channels.append(rtio.LogChannel())
self.submodules.rtio_tsc = rtio.TSC(glbl_fine_ts_width=3)
self.submodules.rtio_core = rtio.Core(
self.rtio_tsc, self.rtio_channels, lane_count=description["sed_lanes"]
)
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
self.submodules.rtio_core = rtio.Core(self.rtio_tsc, self.rtio_channels)
self.csr_devices.append("rtio_core")
if self.acpki:
@ -194,12 +193,13 @@ class GenericStandalone(SoCCore):
self.add_csr_group("grabber", self.grabber_csr_group)
for grabber in self.grabber_csr_group:
self.platform.add_false_path_constraints(
self.sys_crg.cd_sys.clk, getattr(self, grabber).deserializer.cd_cl.clk)
self.rtio_crg.cd_rtio.clk, getattr(self, grabber).deserializer.cd_cl.clk)
class GenericMaster(SoCCore):
def __init__(self, description, acpki=False):
clk_freq = description["rtio_frequency"]
sys_clk_freq = 125e6
rtio_clk_freq = description["rtio_frequency"]
self.acpki = acpki
@ -210,35 +210,26 @@ class GenericMaster(SoCCore):
ident = description["variant"]
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident, ps_cd_sys=False)
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
self.config["HW_REV"] = description["hw_rev"]
self.config["hw_rev"] = description["hw_rev"]
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
self.submodules += SMAClkinForward(self.platform)
data_pads = [platform.request("sfp", i) for i in range(4)]
self.submodules.gt_drtio = gtx_7series.GTX(
self.submodules.drtio_transceiver = gtx_7series.GTX(
clock_pads=platform.request("clk_gtp"),
pads=data_pads,
clk_freq=clk_freq)
self.csr_devices.append("gt_drtio")
sys_clk_freq=sys_clk_freq)
self.csr_devices.append("drtio_transceiver")
txout_buf = Signal()
gtx0 = self.gt_drtio.gtxs[0]
self.specials += Instance("BUFG", i_I=gtx0.txoutclk, o_O=txout_buf)
self.submodules.bootstrap = GTPBootstrapClock(self.platform, clk_freq)
self.submodules.sys_crg = zynq_clocking.SYSCRG(
self.platform,
self.ps7,
txout_buf,
clk_sw=gtx0.tx_init.done)
self.csr_devices.append("sys_crg")
self.crg = self.ps7 # HACK for eem_7series to find the clock
self.crg.cd_sys = self.sys_crg.cd_sys
platform.add_false_path_constraints(
self.bootstrap.cd_bootstrap.clk, self.sys_crg.cd_sys.clk)
self.submodules.rtio_crg = RTIOClockMultiplier(rtio_clk_freq)
self.csr_devices.append("rtio_crg")
fix_serdes_timing_path(platform)
self.config["HAS_SI5324"] = None
@ -258,13 +249,13 @@ class GenericMaster(SoCCore):
self.config["RTIO_LOG_CHANNEL"] = len(self.rtio_channels)
self.rtio_channels.append(rtio.LogChannel())
self.submodules.rtio_tsc = rtio.TSC(glbl_fine_ts_width=3)
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
drtio_csr_group = []
drtioaux_csr_group = []
drtioaux_memory_group = []
self.drtio_cri = []
for i in range(len(self.gt_drtio.channels)):
for i in range(len(self.drtio_transceiver.channels)):
core_name = "drtio" + str(i)
coreaux_name = "drtioaux" + str(i)
memory_name = "drtioaux" + str(i) + "_mem"
@ -274,7 +265,7 @@ class GenericMaster(SoCCore):
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
core = cdr(DRTIOMaster(self.rtio_tsc, self.gt_drtio.channels[i]))
core = cdr(DRTIOMaster(self.rtio_tsc, self.drtio_transceiver.channels[i]))
setattr(self.submodules, core_name, core)
self.drtio_cri.append(core.cri)
self.csr_devices.append(core_name)
@ -293,9 +284,7 @@ class GenericMaster(SoCCore):
self.add_csr_group("drtioaux", drtioaux_csr_group)
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
self.submodules.rtio_core = rtio.Core(
self.rtio_tsc, self.rtio_channels, lane_count=description["sed_lanes"]
)
self.submodules.rtio_core = rtio.Core(self.rtio_tsc, self.rtio_channels)
self.csr_devices.append("rtio_core")
if self.acpki:
@ -325,26 +314,24 @@ class GenericMaster(SoCCore):
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
self.csr_devices.append("routing_table")
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.rtio_core.cri,
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.cri_con.switch.slave,
self.ps7.s_axi_hp1)
self.csr_devices.append("rtio_analyzer")
if has_grabber:
self.config["HAS_GRABBER"] = None
self.add_csr_group("grabber", self.grabber_csr_group)
self.submodules.virtual_leds = virtual_leds.VirtualLeds()
self.csr_devices.append("virtual_leds")
self.comb += [self.virtual_leds.get(i).eq(channel.rx_ready)
for i, channel in enumerate(self.gt_drtio.channels)]
for i, channel in enumerate(self.drtio_transceiver.channels)]
class GenericSatellite(SoCCore):
def __init__(self, description, acpki=False):
clk_freq = description["rtio_frequency"]
sys_clk_freq = 125e6
rtio_clk_freq = description["rtio_frequency"]
self.acpki = acpki
@ -355,35 +342,25 @@ class GenericSatellite(SoCCore):
ident = description["variant"]
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident, ps_cd_sys=False)
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
self.config["HW_REV"] = description["hw_rev"]
self.config["hw_rev"] = description["hw_rev"]
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
self.crg = self.ps7 # HACK for eem_7series to find the clock
self.submodules.rtio_crg = RTIOClockMultiplier(rtio_clk_freq)
self.csr_devices.append("rtio_crg")
fix_serdes_timing_path(platform)
data_pads = [platform.request("sfp", i) for i in range(4)]
self.submodules.gt_drtio = gtx_7series.GTX(
self.submodules.drtio_transceiver = gtx_7series.GTX(
clock_pads=platform.request("clk_gtp"),
pads=data_pads,
clk_freq=clk_freq)
self.csr_devices.append("gt_drtio")
txout_buf = Signal()
gtx0 = self.gt_drtio.gtxs[0]
self.specials += Instance("BUFG", i_I=gtx0.txoutclk, o_O=txout_buf)
self.submodules.bootstrap = GTPBootstrapClock(self.platform, clk_freq)
self.submodules.sys_crg = zynq_clocking.SYSCRG(
self.platform,
self.ps7,
txout_buf,
clk_sw=gtx0.tx_init.done)
platform.add_false_path_constraints(
self.bootstrap.cd_bootstrap.clk, self.sys_crg.cd_sys.clk)
self.csr_devices.append("sys_crg")
self.crg = self.ps7 # HACK for eem_7series to find the clock
self.crg.cd_sys = self.sys_crg.cd_sys
fix_serdes_timing_path(platform)
sys_clk_freq=sys_clk_freq)
self.csr_devices.append("drtio_transceiver")
self.rtio_channels = []
has_grabber = any(peripheral["type"] == "grabber" for peripheral in description["peripherals"])
@ -399,13 +376,13 @@ class GenericSatellite(SoCCore):
self.config["RTIO_LOG_CHANNEL"] = len(self.rtio_channels)
self.rtio_channels.append(rtio.LogChannel())
self.submodules.rtio_tsc = rtio.TSC(glbl_fine_ts_width=3)
self.submodules.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3)
drtioaux_csr_group = []
drtioaux_memory_group = []
drtiorep_csr_group = []
self.drtio_cri = []
for i in range(len(self.gt_drtio.channels)):
for i in range(len(self.drtio_transceiver.channels)):
coreaux_name = "drtioaux" + str(i)
memory_name = "drtioaux" + str(i) + "_mem"
drtioaux_csr_group.append(coreaux_name)
@ -416,7 +393,7 @@ class GenericSatellite(SoCCore):
if i == 0:
self.submodules.rx_synchronizer = cdr(XilinxRXSynchronizer())
core = cdr(DRTIOSatellite(
self.rtio_tsc, self.gt_drtio.channels[i],
self.rtio_tsc, self.drtio_transceiver.channels[i],
self.rx_synchronizer))
self.submodules.drtiosat = core
self.csr_devices.append("drtiosat")
@ -425,7 +402,7 @@ class GenericSatellite(SoCCore):
drtiorep_csr_group.append(corerep_name)
core = cdr(DRTIORepeater(
self.rtio_tsc, self.gt_drtio.channels[i]))
self.rtio_tsc, self.drtio_transceiver.channels[i]))
setattr(self.submodules, corerep_name, core)
self.drtio_cri.append(core.cri)
self.csr_devices.append(corerep_name)
@ -464,15 +441,13 @@ class GenericSatellite(SoCCore):
self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
self.csr_devices.append("rtio_dma")
self.submodules.local_io = SyncRTIO(
self.rtio_tsc, self.rtio_channels, lane_count=description["sed_lanes"]
)
self.submodules.local_io = SyncRTIO(self.rtio_tsc, self.rtio_channels)
self.comb += self.drtiosat.async_errors.eq(self.local_io.async_errors)
self.submodules.cri_con = rtio.CRIInterconnectShared(
[self.drtiosat.cri, self.rtio_dma.cri],
[self.drtiosat.cri],
[self.local_io.cri] + self.drtio_cri,
enable_routing=True)
mode="sync", enable_routing=True)
self.csr_devices.append("cri_con")
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
@ -481,36 +456,65 @@ class GenericSatellite(SoCCore):
self.submodules.rtio_moninj = rtio.MonInj(self.rtio_channels)
self.csr_devices.append("rtio_moninj")
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.local_io.cri,
self.ps7.s_axi_hp1)
self.csr_devices.append("rtio_analyzer")
rtio_clk_period = 1e9/clk_freq
self.config["RTIO_FREQUENCY"] = str(clk_freq/1e6)
rtio_clk_period = 1e9/rtio_clk_freq
self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq/1e6)
self.submodules.siphaser = SiPhaser7Series(
si5324_clkin=platform.request("cdr_clk"),
rx_synchronizer=self.rx_synchronizer,
ultrascale=False,
rtio_clk_freq=self.gt_drtio.rtio_clk_freq)
rtio_clk_freq=self.drtio_transceiver.rtio_clk_freq)
platform.add_false_path_constraints(
self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
self.csr_devices.append("siphaser")
self.config["HAS_SI5324"] = None
self.config["SI5324_SOFT_RESET"] = None
gtx0 = self.gt_drtio.gtxs[0]
gtx0 = self.drtio_transceiver.gtxs[0]
platform.add_period_constraint(gtx0.txoutclk, rtio_clk_period)
platform.add_period_constraint(gtx0.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.crg.cd_sys.clk,
gtx0.txoutclk, gtx0.rxoutclk)
for gtx in self.drtio_transceiver.gtxs[1:]:
platform.add_period_constraint(gtx.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.crg.cd_sys.clk, gtx.rxoutclk)
if has_grabber:
self.config["HAS_GRABBER"] = None
self.add_csr_group("grabber", self.grabber_csr_group)
# no RTIO CRG here
self.submodules.virtual_leds = virtual_leds.VirtualLeds()
self.csr_devices.append("virtual_leds")
self.comb += [self.virtual_leds.get(i).eq(channel.rx_ready)
for i, channel in enumerate(self.gt_drtio.channels)]
for i, channel in enumerate(self.drtio_transceiver.channels)]
def write_mem_file(soc, filename):
with open(filename, "w") as f:
f.write(cpu_interface.get_mem_rust(
soc.get_memory_regions(), soc.get_memory_groups(), None))
def write_csr_file(soc, filename):
with open(filename, "w") as f:
f.write(cpu_interface.get_csr_rust(
soc.get_csr_regions(), soc.get_csr_groups(), soc.get_constants()))
def write_rustc_cfg_file(soc, filename):
with open(filename, "w") as f:
for name, origin, busword, obj in soc.get_csr_regions():
f.write("has_{}\n".format(name.lower()))
for name, value in soc.get_constants():
if name.upper().startswith("CONFIG_"):
if value is None:
f.write("{}\n".format(name.lower()[7:]))
else:
f.write("{}=\"{}\"\n".format(name.lower()[7:], str(value)))
def main():
parser = argparse.ArgumentParser(
@ -533,14 +537,14 @@ def main():
if description["target"] != "kasli_soc":
raise ValueError("Description is for a different target")
if description["drtio_role"] == "standalone":
if description["base"] == "standalone":
cls = GenericStandalone
elif description["drtio_role"] == "master":
elif description["base"] == "master":
cls = GenericMaster
elif description["drtio_role"] == "satellite":
elif description["base"] == "satellite":
cls = GenericSatellite
else:
raise ValueError("Invalid DRTIO role")
raise ValueError("Invalid base")
soc = cls(description, acpki=args.acpki)
soc.finalize()

4
src/gateware/test_dma.py
View File

@ -168,7 +168,7 @@ class FullStackTB(Module):
bus = axi.Interface(ws*8)
self.memory = AXIMemorySim(bus, sequence)
self.submodules.dut = dma.DMA(bus)
self.submodules.tsc = rtio.TSC()
self.submodules.tsc = rtio.TSC("async")
self.submodules.rtio = rtio.Core(self.tsc, rtio_channels)
self.comb += self.dut.cri.connect(self.rtio.cri)
@ -229,7 +229,7 @@ class TestDMA(unittest.TestCase):
do_dma(tb.dut, 0), monitor(),
(None for _ in range(70)),
tb.memory.ar(), tb.memory.r()
]}, {"sys": 8, "rsys": 8, "rio": 8, "rio_phy": 8})
]}, {"sys": 8, "rsys": 8, "rtio": 8, "rio": 8, "rio_phy": 8})
correct_changes = [(timestamp + 11, channel)
for channel, timestamp, _, _ in test_writes_full_stack]

305
src/gateware/zc706.py
View File

@ -10,11 +10,12 @@ from migen.genlib.cdc import MultiReg
from migen_axi.integration.soc_core import SoCCore
from migen_axi.platforms import zc706
from misoc.interconnect.csr import *
from misoc.integration import cpu_interface
from misoc.cores import gpio
from artiq.gateware import rtio, nist_clock, nist_qc2
from artiq.gateware.rtio.phy import ttl_simple, ttl_serdes_7series, dds, spi2, edge_counter
from artiq.gateware.rtio.xilinx_clocking import fix_serdes_timing_path
from artiq.gateware.rtio.xilinx_clocking import RTIOClockMultiplier, fix_serdes_timing_path
from artiq.gateware.drtio.transceiver import gtx_7series
from artiq.gateware.drtio.siphaser import SiPhaser7Series
from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
@ -24,8 +25,51 @@ import dma
import analyzer
import acpki
import drtio_aux_controller
import zynq_clocking
from config import write_csr_file, write_mem_file, write_rustc_cfg_file
class RTIOCRG(Module, AutoCSR):
def __init__(self, platform, rtio_internal_clk):
self.clock_sel = CSRStorage()
self.pll_reset = CSRStorage(reset=1)
self.pll_locked = CSRStatus()
self.clock_domains.cd_rtio = ClockDomain()
self.clock_domains.cd_rtiox4 = ClockDomain(reset_less=True)
rtio_external_clk = Signal()
user_sma_clock = platform.request("user_sma_clock")
platform.add_period_constraint(user_sma_clock.p, 8.0)
self.specials += Instance("IBUFDS",
i_I=user_sma_clock.p, i_IB=user_sma_clock.n,
o_O=rtio_external_clk)
pll_locked = Signal()
rtio_clk = Signal()
rtiox4_clk = Signal()
self.specials += [
Instance("PLLE2_ADV",
p_STARTUP_WAIT="FALSE", o_LOCKED=pll_locked,
p_REF_JITTER1=0.01,
p_CLKIN1_PERIOD=8.0, p_CLKIN2_PERIOD=8.0,
i_CLKIN1=rtio_internal_clk, i_CLKIN2=rtio_external_clk,
# Warning: CLKINSEL=0 means CLKIN2 is selected
i_CLKINSEL=~self.clock_sel.storage,
# VCO @ 1GHz when using 125MHz input
p_CLKFBOUT_MULT=8, p_DIVCLK_DIVIDE=1,
i_CLKFBIN=self.cd_rtio.clk,
i_RST=self.pll_reset.storage,
o_CLKFBOUT=rtio_clk,
p_CLKOUT0_DIVIDE=2, p_CLKOUT0_PHASE=0.0,
o_CLKOUT0=rtiox4_clk),
Instance("BUFG", i_I=rtio_clk, o_O=self.cd_rtio.clk),
Instance("BUFG", i_I=rtiox4_clk, o_O=self.cd_rtiox4.clk),
AsyncResetSynchronizer(self.cd_rtio, ~pll_locked),
MultiReg(pll_locked, self.pll_locked.status)
]
class SMAClkinForward(Module):
def __init__(self, platform):
@ -40,37 +84,6 @@ class SMAClkinForward(Module):
]
class CLK200BootstrapClock(Module):
def __init__(self, platform, freq=125e6):
self.clock_domains.cd_bootstrap = ClockDomain(reset_less=True)
self.cd_bootstrap.clk.attr.add("keep")
clk200 = platform.request("clk200")
clk200_se = Signal()
pll_fb = Signal()
pll_clkout = Signal()
assert freq in [125e6, 100e6]
divide = int(1e9/freq)
self.specials += [
Instance("IBUFDS",
i_I=clk200.p, i_IB=clk200.n, o_O=clk200_se),
Instance("PLLE2_BASE",
p_CLKIN1_PERIOD=5.0,
i_CLKIN1=clk200_se,
i_CLKFBIN=pll_fb,
o_CLKFBOUT=pll_fb,
# VCO @ 1GHz
p_CLKFBOUT_MULT=5, p_DIVCLK_DIVIDE=1,
# 125MHz/100MHz for bootstrap
p_CLKOUT1_DIVIDE=divide, p_CLKOUT1_PHASE=0.0, o_CLKOUT1=pll_clkout,
),
Instance("BUFG", i_I=pll_clkout, o_O=self.cd_bootstrap.clk)
]
# The NIST backplanes require setting VADJ to 3.3V by reprogramming the power supply.
# This also changes the I/O standard for some on-board LEDs.
leds_fmc33 = [
@ -122,10 +135,14 @@ def prepare_zc706_platform(platform):
platform.toolchain.bitstream_commands.extend([
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
])
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
class ZC706(SoCCore):
def __init__(self, acpki=False):
self.acpki = acpki
self.rustc_cfg = dict()
platform = zc706.Platform()
prepare_zc706_platform(platform)
@ -133,49 +150,30 @@ class ZC706(SoCCore):
ident = self.__class__.__name__
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident, ps_cd_sys=False)
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
platform.add_extension(si5324_fmc33)
self.comb += platform.request("si5324_33").rst_n.eq(1)
cdr_clk = Signal()
cdr_clk_buf = Signal()
si5324_out = platform.request("si5324_clkout")
platform.add_period_constraint(si5324_out.p, 8.0)
self.specials += [
Instance("IBUFDS_GTE2",
i_CEB=0,
i_I=si5324_out.p, i_IB=si5324_out.n,
o_O=cdr_clk,
p_CLKCM_CFG="TRUE",
p_CLKRCV_TRST="TRUE",
p_CLKSWING_CFG=3),
Instance("BUFG", i_I=cdr_clk, o_O=cdr_clk_buf)
]
self.config["HAS_SI5324"] = None
self.config["SI5324_AS_SYNTHESIZER"] = None
self.config["SI5324_SOFT_RESET"] = None
self.submodules.bootstrap = CLK200BootstrapClock(platform)
self.submodules.sys_crg = zynq_clocking.SYSCRG(self.platform, self.ps7, cdr_clk_buf)
platform.add_false_path_constraints(
self.bootstrap.cd_bootstrap.clk, self.sys_crg.cd_sys.clk)
self.csr_devices.append("sys_crg")
self.submodules.rtio_crg = RTIOCRG(self.platform, self.ps7.cd_sys.clk)
self.csr_devices.append("rtio_crg")
self.rustc_cfg["has_rtio_crg_clock_sel"] = None
self.platform.add_period_constraint(self.rtio_crg.cd_rtio.clk, 8.)
self.platform.add_false_path_constraints(
self.ps7.cd_sys.clk,
self.rtio_crg.cd_rtio.clk)
def add_rtio(self, rtio_channels):
self.submodules.rtio_tsc = rtio.TSC(glbl_fine_ts_width=3)
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
self.submodules.rtio_core = rtio.Core(self.rtio_tsc, rtio_channels)
self.csr_devices.append("rtio_core")
if self.acpki:
self.config["KI_IMPL"] = "acp"
self.rustc_cfg["ki_impl"] = "acp"
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
bus=self.ps7.s_axi_acp,
user=self.ps7.s_axi_acp_user,
evento=self.ps7.event.o)
self.csr_devices.append("rtio")
else:
self.config["KI_IMPL"] = "csr"
self.rustc_cfg["ki_impl"] = "csr"
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
self.csr_devices.append("rtio")
@ -198,18 +196,22 @@ class ZC706(SoCCore):
class _MasterBase(SoCCore):
def __init__(self, acpki=False, drtio100mhz=False):
self.acpki = acpki
clk_freq = 100e6 if drtio100mhz else 125e6
self.rustc_cfg = dict()
platform = zc706.Platform()
prepare_zc706_platform(platform)
ident = self.__class__.__name__
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident, ps_cd_sys=False)
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
platform.add_extension(si5324_fmc33)
self.sys_clk_freq = 125e6
rtio_clk_freq = 100e6 if drtio100mhz else self.sys_clk_freq
platform = self.platform
self.comb += platform.request("sfp_tx_disable_n").eq(1)
data_pads = [
platform.request("sfp"),
@ -219,32 +221,20 @@ class _MasterBase(SoCCore):
self.submodules += SMAClkinForward(self.platform)
# 1000BASE_BX10 Ethernet compatible, 125MHz RTIO clock
self.submodules.gt_drtio = gtx_7series.GTX(
self.submodules.drtio_transceiver = gtx_7series.GTX(
clock_pads=platform.request("si5324_clkout"),
pads=data_pads,
clk_freq=clk_freq)
self.csr_devices.append("gt_drtio")
sys_clk_freq=self.sys_clk_freq,
rtio_clk_freq=rtio_clk_freq)
self.csr_devices.append("drtio_transceiver")
self.submodules.rtio_tsc = rtio.TSC(glbl_fine_ts_width=3)
txout_buf = Signal()
gtx0 = self.gt_drtio.gtxs[0]
self.specials += Instance("BUFG", i_I=gtx0.txoutclk, o_O=txout_buf)
self.submodules.bootstrap = CLK200BootstrapClock(platform, clk_freq)
self.submodules.sys_crg = zynq_clocking.SYSCRG(
self.platform,
self.ps7,
txout_buf,
clk_sw=gtx0.tx_init.done,
freq=clk_freq)
platform.add_false_path_constraints(
self.bootstrap.cd_bootstrap.clk, self.sys_crg.cd_sys.clk)
self.csr_devices.append("sys_crg")
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
drtio_csr_group = []
drtioaux_csr_group = []
drtioaux_memory_group = []
self.drtio_cri = []
for i in range(len(self.gt_drtio.channels)):
for i in range(len(self.drtio_transceiver.channels)):
core_name = "drtio" + str(i)
coreaux_name = "drtioaux" + str(i)
memory_name = "drtioaux" + str(i) + "_mem"
@ -255,7 +245,7 @@ class _MasterBase(SoCCore):
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
core = cdr(DRTIOMaster(
self.rtio_tsc, self.gt_drtio.channels[i]))
self.rtio_tsc, self.drtio_transceiver.channels[i]))
setattr(self.submodules, core_name, core)
self.drtio_cri.append(core.cri)
self.csr_devices.append(core_name)
@ -268,45 +258,53 @@ class _MasterBase(SoCCore):
memory_address = self.axi2csr.register_port(coreaux.get_tx_port(), mem_size)
self.axi2csr.register_port(coreaux.get_rx_port(), mem_size)
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, mem_size * 2)
self.config["HAS_DRTIO"] = None
self.config["HAS_DRTIO_ROUTING"] = None
self.rustc_cfg["has_drtio"] = None
self.rustc_cfg["has_drtio_routing"] = None
self.add_csr_group("drtio", drtio_csr_group)
self.add_csr_group("drtioaux", drtioaux_csr_group)
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
self.config["RTIO_FREQUENCY"] = str(self.gt_drtio.rtio_clk_freq/1e6)
self.rustc_cfg["rtio_frequency"] = str(self.drtio_transceiver.rtio_clk_freq/1e6)
self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324_33").rst_n)
self.csr_devices.append("si5324_rst_n")
self.config["HAS_SI5324"] = None
self.config["SI5324_AS_SYNTHESIZER"] = None
self.rustc_cfg["has_si5324"] = None
self.rustc_cfg["si5324_as_synthesizer"] = None
rtio_clk_period = 1e9/self.drtio_transceiver.rtio_clk_freq
# Constrain TX & RX timing for the first transceiver channel
# (First channel acts as master for phase alignment for all channels' TX)
gtx0 = self.drtio_transceiver.gtxs[0]
platform.add_period_constraint(gtx0.txoutclk, rtio_clk_period)
platform.add_period_constraint(gtx0.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.ps7.cd_sys.clk,
gtx0.txoutclk, gtx0.rxoutclk)
# Constrain RX timing for the each transceiver channel
# (Each channel performs single-lane phase alignment for RX)
for gtx in self.gt_drtio.gtxs[1:]:
for gtx in self.drtio_transceiver.gtxs[1:]:
platform.add_period_constraint(gtx.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
gtx0.txoutclk, gtx.rxoutclk)
self.ps7.cd_sys.clk, gtx0.txoutclk, gtx.rxoutclk)
fix_serdes_timing_path(platform)
self.submodules.rtio_crg = RTIOClockMultiplier(self.sys_clk_freq)
self.csr_devices.append("rtio_crg")
fix_serdes_timing_path(self.platform)
def add_rtio(self, rtio_channels):
self.submodules.rtio_tsc = rtio.TSC(glbl_fine_ts_width=3)
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
self.submodules.rtio_core = rtio.Core(self.rtio_tsc, rtio_channels)
self.csr_devices.append("rtio_core")
if self.acpki:
self.config["KI_IMPL"] = "acp"
self.rustc_cfg["ki_impl"] = "acp"
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
bus=self.ps7.s_axi_acp,
user=self.ps7.s_axi_acp_user,
evento=self.ps7.event.o)
self.csr_devices.append("rtio")
else:
self.config["KI_IMPL"] = "csr"
self.rustc_cfg["ki_impl"] = "csr"
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
self.csr_devices.append("rtio")
@ -316,13 +314,13 @@ class _MasterBase(SoCCore):
self.submodules.cri_con = rtio.CRIInterconnectShared(
[self.rtio.cri, self.rtio_dma.cri],
[self.rtio_core.cri] + self.drtio_cri,
enable_routing=True)
mode="sync", enable_routing=True)
self.csr_devices.append("cri_con")
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
self.csr_devices.append("rtio_moninj")
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.rtio_core.cri,
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.cri_con.switch.slave,
self.ps7.s_axi_hp1)
self.csr_devices.append("rtio_analyzer")
@ -333,18 +331,21 @@ class _MasterBase(SoCCore):
class _SatelliteBase(SoCCore):
def __init__(self, acpki=False, drtio100mhz=False):
self.acpki = acpki
clk_freq = 100e6 if drtio100mhz else 125e6
self.rustc_cfg = dict()
platform = zc706.Platform()
prepare_zc706_platform(platform)
ident = self.__class__.__name__
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident, ps_cd_sys=False)
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
platform.add_extension(si5324_fmc33)
self.sys_clk_freq = 125e6
rtio_clk_freq = 100e6 if drtio100mhz else self.sys_clk_freq
platform = self.platform
# SFP
self.comb += platform.request("sfp_tx_disable_n").eq(0)
data_pads = [
@ -352,38 +353,21 @@ class _SatelliteBase(SoCCore):
platform.request("user_sma_mgt")
]
self.submodules.rtio_tsc = rtio.TSC(glbl_fine_ts_width=3)
self.submodules.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3)
# 1000BASE_BX10 Ethernet compatible, 125MHz RTIO clock
self.submodules.gt_drtio = gtx_7series.GTX(
self.submodules.drtio_transceiver = gtx_7series.GTX(
clock_pads=platform.request("si5324_clkout"),
pads=data_pads,
clk_freq=clk_freq)
self.csr_devices.append("gt_drtio")
txout_buf = Signal()
txout_buf.attr.add("keep")
gtx0 = self.gt_drtio.gtxs[0]
self.specials += Instance(
"BUFG",
i_I=gtx0.txoutclk,
o_O=txout_buf)
self.submodules.bootstrap = CLK200BootstrapClock(platform, clk_freq)
self.submodules.sys_crg = zynq_clocking.SYSCRG(
self.platform,
self.ps7,
txout_buf,
clk_sw=gtx0.tx_init.done,
freq=clk_freq)
platform.add_false_path_constraints(
self.bootstrap.cd_bootstrap.clk, self.sys_crg.cd_sys.clk)
self.csr_devices.append("sys_crg")
sys_clk_freq=self.sys_clk_freq,
rtio_clk_freq=rtio_clk_freq)
self.csr_devices.append("drtio_transceiver")
drtioaux_csr_group = []
drtioaux_memory_group = []
drtiorep_csr_group = []
self.drtio_cri = []
for i in range(len(self.gt_drtio.channels)):
for i in range(len(self.drtio_transceiver.channels)):
coreaux_name = "drtioaux" + str(i)
memory_name = "drtioaux" + str(i) + "_mem"
drtioaux_csr_group.append(coreaux_name)
@ -395,7 +379,7 @@ class _SatelliteBase(SoCCore):
if i == 0:
self.submodules.rx_synchronizer = cdr(XilinxRXSynchronizer())
core = cdr(DRTIOSatellite(
self.rtio_tsc, self.gt_drtio.channels[0], self.rx_synchronizer))
self.rtio_tsc, self.drtio_transceiver.channels[0], self.rx_synchronizer))
self.submodules.drtiosat = core
self.csr_devices.append("drtiosat")
# Repeaters
@ -403,7 +387,7 @@ class _SatelliteBase(SoCCore):
corerep_name = "drtiorep" + str(i-1)
drtiorep_csr_group.append(corerep_name)
core = cdr(DRTIORepeater(
self.rtio_tsc, self.gt_drtio.channels[i]))
self.rtio_tsc, self.drtio_transceiver.channels[i]))
setattr(self.submodules, corerep_name, core)
self.drtio_cri.append(core.cri)
self.csr_devices.append(corerep_name)
@ -421,70 +405,72 @@ class _SatelliteBase(SoCCore):
# and registered in PS interface
# manually, because software refers to rx/tx by halves of entire memory block, not names
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, mem_size * 2)
self.config["HAS_DRTIO"] = None
self.config["HAS_DRTIO_ROUTING"] = None
self.rustc_cfg["has_drtio"] = None
self.rustc_cfg["has_drtio_routing"] = None
self.add_csr_group("drtioaux", drtioaux_csr_group)
self.add_csr_group("drtiorep", drtiorep_csr_group)
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
self.config["RTIO_FREQUENCY"] = str(self.gt_drtio.rtio_clk_freq/1e6)
self.rustc_cfg["rtio_frequency"] = str(self.drtio_transceiver.rtio_clk_freq/1e6)
# Si5324 Phaser
self.submodules.siphaser = SiPhaser7Series(
si5324_clkin=platform.request("si5324_clkin"),
rx_synchronizer=self.rx_synchronizer,
ultrascale=False,
rtio_clk_freq=self.gt_drtio.rtio_clk_freq)
rtio_clk_freq=self.drtio_transceiver.rtio_clk_freq)
platform.add_false_path_constraints(
self.sys_crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
self.ps7.cd_sys.clk, self.siphaser.mmcm_freerun_output)
self.csr_devices.append("siphaser")
self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324_33").rst_n)
self.csr_devices.append("si5324_rst_n")
self.config["HAS_SI5324"] = None
self.rustc_cfg["has_si5324"] = None
self.rustc_cfg["has_siphaser"] = None
rtio_clk_period = 1e9/self.gt_drtio.rtio_clk_freq
rtio_clk_period = 1e9/self.drtio_transceiver.rtio_clk_freq
# Constrain TX & RX timing for the first transceiver channel
# (First channel acts as master for phase alignment for all channels' TX)
gtx0 = self.drtio_transceiver.gtxs[0]
platform.add_period_constraint(gtx0.txoutclk, rtio_clk_period)
platform.add_period_constraint(gtx0.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.ps7.cd_sys.clk,
gtx0.txoutclk, gtx0.rxoutclk)
# Constrain RX timing for the each transceiver channel
# (Each channel performs single-lane phase alignment for RX)
for gtx in self.gt_drtio.gtxs[1:]:
for gtx in self.drtio_transceiver.gtxs[1:]:
platform.add_period_constraint(gtx.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.sys_crg.cd_sys.clk, gtx.rxoutclk)
self.ps7.cd_sys.clk, gtx.rxoutclk)
fix_serdes_timing_path(platform)
self.submodules.rtio_crg = RTIOClockMultiplier(self.sys_clk_freq)
self.csr_devices.append("rtio_crg")
self.rustc_cfg["has_rtio_crg"] = None
fix_serdes_timing_path(self.platform)
def add_rtio(self, rtio_channels):
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
self.csr_devices.append("rtio_moninj")
if self.acpki:
self.config["KI_IMPL"] = "acp"
self.rustc_cfg["ki_impl"] = "acp"
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
bus=self.ps7.s_axi_acp,
user=self.ps7.s_axi_acp_user,
evento=self.ps7.event.o)
self.csr_devices.append("rtio")
else:
self.config["KI_IMPL"] = "csr"
self.rustc_cfg["ki_impl"] = "csr"
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
self.csr_devices.append("rtio")
self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
self.csr_devices.append("rtio_dma")
self.submodules.local_io = SyncRTIO(self.rtio_tsc, rtio_channels)
self.submodules.cri_con = rtio.CRIInterconnectShared(
[self.drtiosat.cri, self.rtio_dma.cri],
[self.drtiosat.cri],
[self.local_io.cri] + self.drtio_cri,
enable_routing=True)
mode="sync", enable_routing=True)
self.csr_devices.append("cri_con")
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.local_io.cri,
self.ps7.s_axi_hp1)
self.csr_devices.append("rtio_analyzer")
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
self.csr_devices.append("routing_table")
@ -639,7 +625,6 @@ class _NIST_QC2_RTIO:
class NIST_CLOCK(ZC706, _NIST_CLOCK_RTIO):
def __init__(self, acpki, drtio100mhz):
ZC706.__init__(self, acpki)
self.submodules += SMAClkinForward(self.platform)
_NIST_CLOCK_RTIO.__init__(self)
class NIST_CLOCK_Master(_MasterBase, _NIST_CLOCK_RTIO):
@ -655,7 +640,6 @@ class NIST_CLOCK_Satellite(_SatelliteBase, _NIST_CLOCK_RTIO):
class NIST_QC2(ZC706, _NIST_QC2_RTIO):
def __init__(self, acpki, drtio100mhz):
ZC706.__init__(self, acpki)
self.submodules += SMAClkinForward(self.platform)
_NIST_QC2_RTIO.__init__(self)
class NIST_QC2_Master(_MasterBase, _NIST_QC2_RTIO):
@ -671,6 +655,27 @@ class NIST_QC2_Satellite(_SatelliteBase, _NIST_QC2_RTIO):
VARIANTS = {cls.__name__.lower(): cls for cls in [NIST_CLOCK, NIST_CLOCK_Master, NIST_CLOCK_Satellite,
NIST_QC2, NIST_QC2_Master, NIST_QC2_Satellite]}
def write_csr_file(soc, filename):
with open(filename, "w") as f:
f.write(cpu_interface.get_csr_rust(
soc.get_csr_regions(), soc.get_csr_groups(), soc.get_constants()))
def write_mem_file(soc, filename):
with open(filename, "w") as f:
f.write(cpu_interface.get_mem_rust(
soc.get_memory_regions(), soc.get_memory_groups(), None))
def write_rustc_cfg_file(soc, filename):
with open(filename, "w") as f:
for k, v in sorted(soc.rustc_cfg.items(), key=itemgetter(0)):
if v is None:
f.write("{}\n".format(k))
else:
f.write("{}=\"{}\"\n".format(k, v))
def main():
parser = argparse.ArgumentParser(
description="ARTIQ port to the ZC706 Zynq development kit")

122
src/gateware/zynq_clocking.py
View File

@ -1,122 +0,0 @@
from migen import *
from migen.genlib.cdc import MultiReg
from migen.genlib.resetsync import AsyncResetSynchronizer
from misoc.interconnect.csr import *
class ClockSwitchFSM(Module):
def __init__(self):
self.i_clk_sw = Signal()
self.o_clk_sw = Signal()
self.o_reset = Signal()
###
i_switch = Signal()
o_switch = Signal()
reset = Signal()
# at 125MHz bootstrap cd, will get around 0.5ms
delay_counter = Signal(16, reset=0xFFFF)
# register to prevent glitches
self.sync.bootstrap += [
self.o_clk_sw.eq(o_switch),
self.o_reset.eq(reset),
]
self.o_clk_sw.attr.add("no_retiming")
self.o_reset.attr.add("no_retiming")
self.i_clk_sw.attr.add("no_retiming")
i_switch.attr.add("no_retiming")
self.specials += MultiReg(self.i_clk_sw, i_switch, "bootstrap")
fsm = ClockDomainsRenamer("bootstrap")(FSM(reset_state="START"))
self.submodules += fsm
fsm.act("START",
If(i_switch & ~o_switch,
NextState("RESET_START"))
)
fsm.act("RESET_START",
reset.eq(1),
If(delay_counter == 0,
NextValue(delay_counter, 0xFFFF),
NextState("CLOCK_SWITCH")
).Else(
NextValue(delay_counter, delay_counter-1),
)
)
fsm.act("CLOCK_SWITCH",
reset.eq(1),
NextValue(o_switch, 1),
NextValue(delay_counter, delay_counter-1),
If(delay_counter == 0,
NextState("END"))
)
fsm.act("END",
NextValue(o_switch, 1),
reset.eq(0))
class SYSCRG(Module, AutoCSR):
def __init__(self, platform, ps7, main_clk, clk_sw=None, freq=125e6):
# assumes bootstrap clock is same freq as main and sys output
self.clock_domains.cd_sys = ClockDomain()
self.clock_domains.cd_sys4x = ClockDomain(reset_less=True)
self.current_clock = CSRStatus()
self.cd_sys.clk.attr.add("keep")
bootstrap_clk = ClockSignal("bootstrap")
period = 1e9/freq
pll_locked = Signal()
pll_sys = Signal()
pll_sys4x = Signal()
fb_clk = Signal()
self.submodules.clk_sw_fsm = ClockSwitchFSM()
if clk_sw is None:
self.clock_switch = CSRStorage()
self.comb += self.clk_sw_fsm.i_clk_sw.eq(self.clock_switch.storage)
else:
self.comb += self.clk_sw_fsm.i_clk_sw.eq(clk_sw)
self.specials += [
Instance("PLLE2_ADV",
p_STARTUP_WAIT="FALSE", o_LOCKED=pll_locked,
p_BANDWIDTH="HIGH",
p_REF_JITTER1=0.001,
p_CLKIN1_PERIOD=period, i_CLKIN1=main_clk,
p_CLKIN2_PERIOD=period, i_CLKIN2=bootstrap_clk,
i_CLKINSEL=self.clk_sw_fsm.o_clk_sw,
# VCO @ 1.5GHz when using 125MHz input
# 1.2GHz for 100MHz (zc706)
p_CLKFBOUT_MULT=12, p_DIVCLK_DIVIDE=1,
i_CLKFBIN=fb_clk,
i_RST=self.clk_sw_fsm.o_reset,
o_CLKFBOUT=fb_clk,
p_CLKOUT0_DIVIDE=3, p_CLKOUT0_PHASE=0.0,
o_CLKOUT0=pll_sys4x,
p_CLKOUT1_DIVIDE=12, p_CLKOUT1_PHASE=0.0,
o_CLKOUT1=pll_sys),
Instance("BUFG", i_I=pll_sys, o_O=self.cd_sys.clk),
Instance("BUFG", i_I=pll_sys4x, o_O=self.cd_sys4x.clk),
AsyncResetSynchronizer(self.cd_sys, ~pll_locked),
]
self.comb += self.current_clock.status.eq(self.clk_sw_fsm.o_clk_sw)

13
src/libboard_artiq/src/drtio_routing.rs
View File

@ -1,10 +1,9 @@
use core::fmt;
use libconfig::Config;
use log::{info, warn};
#[cfg(has_drtio_routing)]
use crate::pl::csr;
use core::fmt;
use log::{warn, info};
#[cfg(has_drtio_routing)]
pub const DEST_COUNT: usize = 256;
@ -19,7 +18,7 @@ impl RoutingTable {
// default routing table is for star topology with no repeaters
pub fn default_master(default_n_links: usize) -> RoutingTable {
let mut ret = RoutingTable([[INVALID_HOP; MAX_HOPS]; DEST_COUNT]);
let n_entries = default_n_links + 1; // include local RTIO
let n_entries = default_n_links + 1; // include local RTIO
for i in 0..n_entries {
ret.0[i][0] = i as u8;
}
@ -59,10 +58,10 @@ impl fmt::Display for RoutingTable {
pub fn config_routing_table(default_n_links: usize, cfg: &Config) -> RoutingTable {
let mut ret = RoutingTable::default_master(default_n_links);
if let Ok(data) = cfg.read("routing_table") {
if data.len() == DEST_COUNT * MAX_HOPS {
if data.len() == DEST_COUNT*MAX_HOPS {
for i in 0..DEST_COUNT {
for j in 0..MAX_HOPS {
ret.0[i][j] = data[i * MAX_HOPS + j];
ret.0[i][j] = data[i*MAX_HOPS+j];
}
}
} else {

36
src/libboard_artiq/src/drtioaux.rs
View File

@ -1,12 +1,14 @@
use core_io::{Error as IoError, ErrorKind as IoErrorKind};
use crc;
use io::{proto::{ProtoRead, ProtoWrite},
Cursor};
use libboard_zynq::{time::Milliseconds, timer::GlobalTimer};
use core_io::{ErrorKind as IoErrorKind, Error as IoError};
use io::{proto::ProtoRead, proto::ProtoWrite, Cursor};
use libboard_zynq::{timer::GlobalTimer, time::Milliseconds};
use libcortex_a9::asm::dmb;
use crate::mem::mem::DRTIOAUX_MEM;
use crate::pl::csr::DRTIOAUX;
use crate::drtioaux_proto::Error as ProtocolError;
pub use crate::drtioaux_proto::Packet;
use crate::{drtioaux_proto::Error as ProtocolError, mem::mem::DRTIOAUX_MEM, pl::csr::DRTIOAUX};
#[derive(Debug)]
pub enum Error {
@ -19,7 +21,7 @@ pub enum Error {
RoutingError,
Protocol(ProtocolError),
Protocol(ProtocolError)
}
impl From<ProtocolError> for Error {
@ -61,7 +63,7 @@ pub fn copy_work_buffer(src: *mut u32, dst: *mut u32, len: isize) {
// and AXI burst reads/writes are not implemented yet in gateware
// thus the need for a work buffer for transmitting and copying it over
unsafe {
for i in 0..(len / 4) {
for i in 0..(len/4) {
*dst.offset(i) = *src.offset(i);
//data memory barrier to prevent bursts
dmb();
@ -70,7 +72,8 @@ pub fn copy_work_buffer(src: *mut u32, dst: *mut u32, len: isize) {
}
fn receive<F, T>(linkno: u8, f: F) -> Result<Option<T>, Error>
where F: FnOnce(&[u8]) -> Result<T, Error> {
where F: FnOnce(&[u8]) -> Result<T, Error>
{
let linkidx = linkno as usize;
unsafe {
if (DRTIOAUX[linkidx].aux_rx_present_read)() == 1 {
@ -90,12 +93,12 @@ where F: FnOnce(&[u8]) -> Result<T, Error> {
pub fn recv(linkno: u8) -> Result<Option<Packet>, Error> {
if has_rx_error(linkno) {
return Err(Error::GatewareError);
return Err(Error::GatewareError)
}
receive(linkno, |buffer| {
if buffer.len() < 8 {
return Err(IoError::new(IoErrorKind::UnexpectedEof, "Unexpected end").into());
return Err(IoError::new(IoErrorKind::UnexpectedEof, "Unexpected end").into())
}
let mut reader = Cursor::new(buffer);
@ -104,7 +107,7 @@ pub fn recv(linkno: u8) -> Result<Option<Packet>, Error> {
let checksum = crc::crc32::checksum_ieee(&reader.get_ref()[0..checksum_at]);
reader.set_position(checksum_at);
if reader.read_u32()? != checksum {
return Err(Error::CorruptedPacket);
return Err(Error::CorruptedPacket)
}
reader.set_position(0);
@ -112,7 +115,9 @@ pub fn recv(linkno: u8) -> Result<Option<Packet>, Error> {
})
}
pub fn recv_timeout(linkno: u8, timeout_ms: Option<u64>, timer: GlobalTimer) -> Result<Packet, Error> {
pub fn recv_timeout(linkno: u8, timeout_ms: Option<u64>,
timer: GlobalTimer) -> Result<Packet, Error>
{
let timeout_ms = Milliseconds(timeout_ms.unwrap_or(10));
let limit = timer.get_time() + timeout_ms;
while timer.get_time() < limit {
@ -125,14 +130,15 @@ pub fn recv_timeout(linkno: u8, timeout_ms: Option<u64>, timer: GlobalTimer) ->
}
fn transmit<F>(linkno: u8, f: F) -> Result<(), Error>
where F: FnOnce(&mut [u8]) -> Result<usize, Error> {
where F: FnOnce(&mut [u8]) -> Result<usize, Error>
{
let linkno = linkno as usize;
unsafe {
while (DRTIOAUX[linkno].aux_tx_read)() != 0 {}
let ptr = DRTIOAUX_MEM[linkno].base as *mut u32;
let len = DRTIOAUX_MEM[linkno].size / 2;
// work buffer, works with unaligned mem access
let mut buf: [u8; 1024] = [0; 1024];
let mut buf: [u8; 1024] = [0; 1024];
let len = f(&mut buf[0..len])?;
copy_work_buffer(buf.as_mut_ptr() as *mut u32, ptr, len as isize);
(DRTIOAUX[linkno].aux_tx_length_write)(len as u16);
@ -146,7 +152,7 @@ pub fn send(linkno: u8, packet: &Packet) -> Result<(), Error> {
let mut writer = Cursor::new(buffer);
packet.write_to(&mut writer)?;
// Pad till offset 4, insert checksum there
let padding = (12 - (writer.position() % 8)) % 8;
for _ in 0..padding {

53
src/libboard_artiq/src/drtioaux_async.rs
View File

@ -1,16 +1,18 @@
use core_io::{Error as IoError, ErrorKind as IoErrorKind};
use crc;
use io::{proto::{ProtoRead, ProtoWrite},
Cursor};
use libasync::{block_async, task};
use libboard_zynq::{time::Milliseconds, timer::GlobalTimer};
use nb;
use core_io::{ErrorKind as IoErrorKind, Error as IoError};
use void::Void;
use nb;
use libboard_zynq::{timer::GlobalTimer, time::Milliseconds};
use libasync::{task, block_async};
use io::{proto::ProtoRead, proto::ProtoWrite, Cursor};
use crate::mem::mem::DRTIOAUX_MEM;
use crate::pl::csr::DRTIOAUX;
use crate::drtioaux::{Error, has_rx_error, copy_work_buffer};
pub use crate::drtioaux_proto::Packet;
use crate::{drtioaux::{copy_work_buffer, has_rx_error, Error},
mem::mem::DRTIOAUX_MEM,
pl::csr::DRTIOAUX};
pub async fn reset(linkno: u8) {
let linkno = linkno as usize;
@ -27,14 +29,16 @@ fn tx_ready(linkno: usize) -> nb::Result<(), Void> {
unsafe {
if (DRTIOAUX[linkno].aux_tx_read)() != 0 {
Err(nb::Error::WouldBlock)
} else {
}
else {
Ok(())
}
}
}
async fn receive<F, T>(linkno: u8, f: F) -> Result<Option<T>, Error>
where F: FnOnce(&[u8]) -> Result<T, Error> {
where F: FnOnce(&[u8]) -> Result<T, Error>
{
let linkidx = linkno as usize;
unsafe {
if (DRTIOAUX[linkidx].aux_rx_present_read)() == 1 {
@ -54,12 +58,12 @@ where F: FnOnce(&[u8]) -> Result<T, Error> {
pub async fn recv(linkno: u8) -> Result<Option<Packet>, Error> {
if has_rx_error(linkno) {
return Err(Error::GatewareError);
return Err(Error::GatewareError)
}
receive(linkno, |buffer| {
if buffer.len() < 8 {
return Err(IoError::new(IoErrorKind::UnexpectedEof, "Unexpected end").into());
return Err(IoError::new(IoErrorKind::UnexpectedEof, "Unexpected end").into())
}
let mut reader = Cursor::new(buffer);
@ -68,16 +72,17 @@ pub async fn recv(linkno: u8) -> Result<Option<Packet>, Error> {
let checksum = crc::crc32::checksum_ieee(&reader.get_ref()[0..checksum_at]);
reader.set_position(checksum_at);
if reader.read_u32()? != checksum {
return Err(Error::CorruptedPacket);
return Err(Error::CorruptedPacket)
}
reader.set_position(0);
Ok(Packet::read_from(&mut reader)?)
})
.await
}).await
}
pub async fn recv_timeout(linkno: u8, timeout_ms: Option<u64>, timer: GlobalTimer) -> Result<Packet, Error> {
pub async fn recv_timeout(linkno: u8, timeout_ms: Option<u64>,
timer: GlobalTimer) -> Result<Packet, Error>
{
let timeout_ms = Milliseconds(timeout_ms.unwrap_or(10));
let limit = timer.get_time() + timeout_ms;
let mut would_block = false;
@ -88,9 +93,7 @@ pub async fn recv_timeout(linkno: u8, timeout_ms: Option<u64>, timer: GlobalTime
task::r#yield().await;
}
match recv(linkno).await? {
None => {
would_block = true;
}
None => { would_block = true; },
Some(packet) => return Ok(packet),
}
}
@ -98,14 +101,15 @@ pub async fn recv_timeout(linkno: u8, timeout_ms: Option<u64>, timer: GlobalTime
}
async fn transmit<F>(linkno: u8, f: F) -> Result<(), Error>
where F: FnOnce(&mut [u8]) -> Result<usize, Error> {
where F: FnOnce(&mut [u8]) -> Result<usize, Error>
{
let linkno = linkno as usize;
unsafe {
let _ = block_async!(tx_ready(linkno)).await;
let ptr = DRTIOAUX_MEM[linkno].base as *mut u32;
let len = DRTIOAUX_MEM[linkno].size / 2;
// work buffer, works with unaligned mem access
let mut buf: [u8; 1024] = [0; 1024];
let mut buf: [u8; 1024] = [0; 1024];
let len = f(&mut buf[0..len])?;
copy_work_buffer(buf.as_mut_ptr() as *mut u32, ptr, len as isize);
(DRTIOAUX[linkno].aux_tx_length_write)(len as u16);
@ -119,7 +123,7 @@ pub async fn send(linkno: u8, packet: &Packet) -> Result<(), Error> {
let mut writer = Cursor::new(buffer);
packet.write_to(&mut writer)?;
// Pad till offset 4, insert checksum there
let padding = (12 - (writer.position() % 8)) % 8;
for _ in 0..padding {
@ -130,6 +134,5 @@ pub async fn send(linkno: u8, packet: &Packet) -> Result<(), Error> {
writer.write_u32(checksum)?;
Ok(writer.position())
})
.await
}).await
}

521
src/libboard_artiq/src/drtioaux_proto.rs
View File

@ -1,13 +1,11 @@
use core_io::{Error as IoError, Read, Write};
use io::proto::{ProtoRead, ProtoWrite};
use core_io::{Write, Read, Error as IoError};
pub const DMA_TRACE_MAX_SIZE: usize = /*max size*/512 - /*CRC*/4 - /*packet ID*/1 - /*trace ID*/4 - /*last*/1 -/*length*/2;
pub const ANALYZER_MAX_SIZE: usize = /*max size*/512 - /*CRC*/4 - /*packet ID*/1 - /*last*/1 - /*length*/2;
use io::proto::{ProtoWrite, ProtoRead};
#[derive(Debug)]
pub enum Error {
UnknownPacket(u8),
Io(IoError),
Io(IoError)
}
impl From<IoError> for Error {
@ -24,172 +22,45 @@ pub enum Packet {
ResetAck,
TSCAck,
DestinationStatusRequest {
destination: u8,
},
DestinationStatusRequest { destination: u8 },
DestinationDownReply,
DestinationOkReply,
DestinationSequenceErrorReply {
channel: u16,
},
DestinationCollisionReply {
channel: u16,
},
DestinationBusyReply {
channel: u16,
},
DestinationSequenceErrorReply { channel: u16 },
DestinationCollisionReply { channel: u16 },
DestinationBusyReply { channel: u16 },
RoutingSetPath {
destination: u8,
hops: [u8; 32],
},
RoutingSetRank {
rank: u8,
},
RoutingSetPath { destination: u8, hops: [u8; 32] },
RoutingSetRank { rank: u8 },
RoutingAck,
MonitorRequest {
destination: u8,
channel: u16,
probe: u8,
},
MonitorReply {
value: u64,
},
InjectionRequest {
destination: u8,
channel: u16,
overrd: u8,
value: u8,
},
InjectionStatusRequest {
destination: u8,
channel: u16,
overrd: u8,
},
InjectionStatusReply {
value: u8,
},
MonitorRequest { destination: u8, channel: u16, probe: u8 },
MonitorReply { value: u64 },
InjectionRequest { destination: u8, channel: u16, overrd: u8, value: u8 },
InjectionStatusRequest { destination: u8, channel: u16, overrd: u8 },
InjectionStatusReply { value: u8 },
I2cStartRequest {
destination: u8,
busno: u8,
},
I2cRestartRequest {
destination: u8,
busno: u8,
},
I2cStopRequest {
destination: u8,
busno: u8,
},
I2cWriteRequest {
destination: u8,
busno: u8,
data: u8,
},
I2cWriteReply {
succeeded: bool,
ack: bool,
},
I2cReadRequest {
destination: u8,
busno: u8,
ack: bool,
},
I2cReadReply {
succeeded: bool,
data: u8,
},
I2cBasicReply {
succeeded: bool,
},
I2cSwitchSelectRequest {
destination: u8,
busno: u8,
address: u8,
mask: u8,
},
I2cStartRequest { destination: u8, busno: u8 },
I2cRestartRequest { destination: u8, busno: u8 },
I2cStopRequest { destination: u8, busno: u8 },
I2cWriteRequest { destination: u8, busno: u8, data: u8 },
I2cWriteReply { succeeded: bool, ack: bool },
I2cReadRequest { destination: u8, busno: u8, ack: bool },
I2cReadReply { succeeded: bool, data: u8 },
I2cBasicReply { succeeded: bool },
I2cSwitchSelectRequest { destination: u8, busno: u8, address: u8, mask: u8 },
SpiSetConfigRequest {
destination: u8,
busno: u8,
flags: u8,
length: u8,
div: u8,
cs: u8,
},
SpiWriteRequest {
destination: u8,
busno: u8,
data: u32,
},
SpiReadRequest {
destination: u8,
busno: u8,
},
SpiReadReply {
succeeded: bool,
data: u32,
},
SpiBasicReply {
succeeded: bool,
},
SpiSetConfigRequest { destination: u8, busno: u8, flags: u8, length: u8, div: u8, cs: u8 },
SpiWriteRequest { destination: u8, busno: u8, data: u32 },
SpiReadRequest { destination: u8, busno: u8 },
SpiReadReply { succeeded: bool, data: u32 },
SpiBasicReply { succeeded: bool },
AnalyzerHeaderRequest {
destination: u8,
},
AnalyzerHeader {
sent_bytes: u32,
total_byte_count: u64,
overflow_occurred: bool,
},
AnalyzerDataRequest {
destination: u8,
},
AnalyzerData {
last: bool,
length: u16,
data: [u8; ANALYZER_MAX_SIZE],
},
DmaAddTraceRequest {
destination: u8,
id: u32,
last: bool,
length: u16,
trace: [u8; DMA_TRACE_MAX_SIZE],
},
DmaAddTraceReply {
succeeded: bool,
},
DmaRemoveTraceRequest {
destination: u8,
id: u32,
},
DmaRemoveTraceReply {
succeeded: bool,
},
DmaPlaybackRequest {
destination: u8,
id: u32,
timestamp: u64,
},
DmaPlaybackReply {
succeeded: bool,
},
DmaPlaybackStatus {
destination: u8,
id: u32,
error: u8,
channel: u32,
timestamp: u64,
},
}
impl Packet {
pub fn read_from<R>(reader: &mut R) -> Result<Self, Error>
where R: Read + ?Sized {
where R: Read + ?Sized
{
Ok(match reader.read_u8()? {
0x00 => Packet::EchoRequest,
0x01 => Packet::EchoReply,
@ -198,18 +69,18 @@ impl Packet {
0x04 => Packet::TSCAck,
0x20 => Packet::DestinationStatusRequest {
destination: reader.read_u8()?,
destination: reader.read_u8()?
},
0x21 => Packet::DestinationDownReply,
0x22 => Packet::DestinationOkReply,
0x23 => Packet::DestinationSequenceErrorReply {
channel: reader.read_u16()?,
channel: reader.read_u16()?
},
0x24 => Packet::DestinationCollisionReply {
channel: reader.read_u16()?,
channel: reader.read_u16()?
},
0x25 => Packet::DestinationBusyReply {
channel: reader.read_u16()?,
channel: reader.read_u16()?
},
0x30 => {
@ -218,75 +89,75 @@ impl Packet {
reader.read_exact(&mut hops)?;
Packet::RoutingSetPath {
destination: destination,
hops: hops,
hops: hops
}
}
},
0x31 => Packet::RoutingSetRank {
rank: reader.read_u8()?,
rank: reader.read_u8()?
},
0x32 => Packet::RoutingAck,
0x40 => Packet::MonitorRequest {
destination: reader.read_u8()?,
channel: reader.read_u16()?,
probe: reader.read_u8()?,
probe: reader.read_u8()?
},
0x41 => Packet::MonitorReply {
value: reader.read_u64()?,
value: reader.read_u64()?
},
0x50 => Packet::InjectionRequest {
destination: reader.read_u8()?,
channel: reader.read_u16()?,
overrd: reader.read_u8()?,
value: reader.read_u8()?,
value: reader.read_u8()?
},
0x51 => Packet::InjectionStatusRequest {
destination: reader.read_u8()?,
channel: reader.read_u16()?,
overrd: reader.read_u8()?,
overrd: reader.read_u8()?
},
0x52 => Packet::InjectionStatusReply {
value: reader.read_u8()?,
value: reader.read_u8()?
},
0x80 => Packet::I2cStartRequest {
destination: reader.read_u8()?,
busno: reader.read_u8()?,
busno: reader.read_u8()?
},
0x81 => Packet::I2cRestartRequest {
destination: reader.read_u8()?,
busno: reader.read_u8()?,
busno: reader.read_u8()?
},
0x82 => Packet::I2cStopRequest {
destination: reader.read_u8()?,
busno: reader.read_u8()?,
busno: reader.read_u8()?
},
0x83 => Packet::I2cWriteRequest {
destination: reader.read_u8()?,
busno: reader.read_u8()?,
data: reader.read_u8()?,
data: reader.read_u8()?
},
0x84 => Packet::I2cWriteReply {
succeeded: reader.read_bool()?,
ack: reader.read_bool()?,
ack: reader.read_bool()?
},
0x85 => Packet::I2cReadRequest {
destination: reader.read_u8()?,
busno: reader.read_u8()?,
ack: reader.read_bool()?,
ack: reader.read_bool()?
},
0x86 => Packet::I2cReadReply {
succeeded: reader.read_bool()?,
data: reader.read_u8()?,
data: reader.read_u8()?
},
0x87 => Packet::I2cBasicReply {
succeeded: reader.read_bool()?,
succeeded: reader.read_bool()?
},
0x88 => Packet::I2cSwitchSelectRequest {
destination: reader.read_u8()?,
busno: reader.read_u8()?,
address: reader.read_u8()?,
mask: reader.read_u8()?,
mask: reader.read_u8()?
},
0x90 => Packet::SpiSetConfigRequest {
@ -295,244 +166,157 @@ impl Packet {
flags: reader.read_u8()?,
length: reader.read_u8()?,
div: reader.read_u8()?,
cs: reader.read_u8()?,
cs: reader.read_u8()?
},
/* 0x91: was Packet::SpiSetXferRequest */
0x92 => Packet::SpiWriteRequest {
destination: reader.read_u8()?,
busno: reader.read_u8()?,
data: reader.read_u32()?,
data: reader.read_u32()?
},
0x93 => Packet::SpiReadRequest {
destination: reader.read_u8()?,
busno: reader.read_u8()?,
busno: reader.read_u8()?
},
0x94 => Packet::SpiReadReply {
succeeded: reader.read_bool()?,
data: reader.read_u32()?,
data: reader.read_u32()?
},
0x95 => Packet::SpiBasicReply {
succeeded: reader.read_bool()?,
succeeded: reader.read_bool()?
},
0xa0 => Packet::AnalyzerHeaderRequest {
destination: reader.read_u8()?,
},
0xa1 => Packet::AnalyzerHeader {
sent_bytes: reader.read_u32()?,
total_byte_count: reader.read_u64()?,
overflow_occurred: reader.read_bool()?,
},
0xa2 => Packet::AnalyzerDataRequest {
destination: reader.read_u8()?,
},
0xa3 => {
let last = reader.read_bool()?;
let length = reader.read_u16()?;
let mut data: [u8; ANALYZER_MAX_SIZE] = [0; ANALYZER_MAX_SIZE];
reader.read_exact(&mut data[0..length as usize])?;
Packet::AnalyzerData {
last: last,
length: length,
data: data,
}
}
0xb0 => {
let destination = reader.read_u8()?;
let id = reader.read_u32()?;
let last = reader.read_bool()?;
let length = reader.read_u16()?;
let mut trace: [u8; DMA_TRACE_MAX_SIZE] = [0; DMA_TRACE_MAX_SIZE];
reader.read_exact(&mut trace[0..length as usize])?;
Packet::DmaAddTraceRequest {
destination: destination,
id: id,
last: last,
length: length as u16,
trace: trace,
}
}
0xb1 => Packet::DmaAddTraceReply {
succeeded: reader.read_bool()?,
},
0xb2 => Packet::DmaRemoveTraceRequest {
destination: reader.read_u8()?,
id: reader.read_u32()?,
},
0xb3 => Packet::DmaRemoveTraceReply {
succeeded: reader.read_bool()?,
},
0xb4 => Packet::DmaPlaybackRequest {
destination: reader.read_u8()?,
id: reader.read_u32()?,
timestamp: reader.read_u64()?,
},
0xb5 => Packet::DmaPlaybackReply {
succeeded: reader.read_bool()?,
},
0xb6 => Packet::DmaPlaybackStatus {
destination: reader.read_u8()?,
id: reader.read_u32()?,
error: reader.read_u8()?,
channel: reader.read_u32()?,
timestamp: reader.read_u64()?,
},
ty => return Err(Error::UnknownPacket(ty)),
ty => return Err(Error::UnknownPacket(ty))
})
}
pub fn write_to<W>(&self, writer: &mut W) -> Result<(), IoError>
where W: Write + ?Sized {
where W: Write + ?Sized
{
match *self {
Packet::EchoRequest => writer.write_u8(0x00)?,
Packet::EchoReply => writer.write_u8(0x01)?,
Packet::ResetRequest => writer.write_u8(0x02)?,
Packet::ResetAck => writer.write_u8(0x03)?,
Packet::TSCAck => writer.write_u8(0x04)?,
Packet::EchoRequest =>
writer.write_u8(0x00)?,
Packet::EchoReply =>
writer.write_u8(0x01)?,
Packet::ResetRequest =>
writer.write_u8(0x02)?,
Packet::ResetAck =>
writer.write_u8(0x03)?,
Packet::TSCAck =>
writer.write_u8(0x04)?,
Packet::DestinationStatusRequest { destination } => {
writer.write_u8(0x20)?;
writer.write_u8(destination)?;
}
Packet::DestinationDownReply => writer.write_u8(0x21)?,
Packet::DestinationOkReply => writer.write_u8(0x22)?,
},
Packet::DestinationDownReply =>
writer.write_u8(0x21)?,
Packet::DestinationOkReply =>
writer.write_u8(0x22)?,
Packet::DestinationSequenceErrorReply { channel } => {
writer.write_u8(0x23)?;
writer.write_u16(channel)?;
}
},
Packet::DestinationCollisionReply { channel } => {
writer.write_u8(0x24)?;
writer.write_u16(channel)?;
}
},
Packet::DestinationBusyReply { channel } => {
writer.write_u8(0x25)?;
writer.write_u16(channel)?;
}
},
Packet::RoutingSetPath { destination, hops } => {
writer.write_u8(0x30)?;
writer.write_u8(destination)?;
writer.write_all(&hops)?;
}
},
Packet::RoutingSetRank { rank } => {
writer.write_u8(0x31)?;
writer.write_u8(rank)?;
}
Packet::RoutingAck => writer.write_u8(0x32)?,
},
Packet::RoutingAck =>
writer.write_u8(0x32)?,
Packet::MonitorRequest {
destination,
channel,
probe,
} => {
Packet::MonitorRequest { destination, channel, probe } => {
writer.write_u8(0x40)?;
writer.write_u8(destination)?;
writer.write_u16(channel)?;
writer.write_u8(probe)?;
}
},
Packet::MonitorReply { value } => {
writer.write_u8(0x41)?;
writer.write_u64(value)?;
}
Packet::InjectionRequest {
destination,
channel,
overrd,
value,
} => {
},
Packet::InjectionRequest { destination, channel, overrd, value } => {
writer.write_u8(0x50)?;
writer.write_u8(destination)?;
writer.write_u16(channel)?;
writer.write_u8(overrd)?;
writer.write_u8(value)?;
}
Packet::InjectionStatusRequest {
destination,
channel,
overrd,
} => {
},
Packet::InjectionStatusRequest { destination, channel, overrd } => {
writer.write_u8(0x51)?;
writer.write_u8(destination)?;
writer.write_u16(channel)?;
writer.write_u8(overrd)?;
}
},
Packet::InjectionStatusReply { value } => {
writer.write_u8(0x52)?;
writer.write_u8(value)?;
}
},
Packet::I2cStartRequest { destination, busno } => {
writer.write_u8(0x80)?;
writer.write_u8(destination)?;
writer.write_u8(busno)?;
}
},
Packet::I2cRestartRequest { destination, busno } => {
writer.write_u8(0x81)?;
writer.write_u8(destination)?;
writer.write_u8(busno)?;
}
},
Packet::I2cStopRequest { destination, busno } => {
writer.write_u8(0x82)?;
writer.write_u8(destination)?;
writer.write_u8(busno)?;
}
Packet::I2cWriteRequest {
destination,
busno,
data,
} => {
},
Packet::I2cWriteRequest { destination, busno, data } => {
writer.write_u8(0x83)?;
writer.write_u8(destination)?;
writer.write_u8(busno)?;
writer.write_u8(data)?;
}
},
Packet::I2cWriteReply { succeeded, ack } => {
writer.write_u8(0x84)?;
writer.write_bool(succeeded)?;
writer.write_bool(ack)?;
}
Packet::I2cReadRequest {
destination,
busno,
ack,
} => {
},
Packet::I2cReadRequest { destination, busno, ack } => {
writer.write_u8(0x85)?;
writer.write_u8(destination)?;
writer.write_u8(busno)?;
writer.write_bool(ack)?;
}
},
Packet::I2cReadReply { succeeded, data } => {
writer.write_u8(0x86)?;
writer.write_bool(succeeded)?;
writer.write_u8(data)?;
}
},
Packet::I2cBasicReply { succeeded } => {
writer.write_u8(0x87)?;
writer.write_bool(succeeded)?;
}
Packet::I2cSwitchSelectRequest {
destination,
busno,
address,
mask,
} => {
},
Packet::I2cSwitchSelectRequest { destination, busno, address, mask } => {
writer.write_u8(0x88)?;
writer.write_u8(destination)?;
writer.write_u8(busno)?;
writer.write_u8(address)?;
writer.write_u8(mask)?;
}
},
Packet::SpiSetConfigRequest {
destination,
busno,
flags,
length,
div,
cs,
} => {
Packet::SpiSetConfigRequest { destination, busno, flags, length, div, cs } => {
writer.write_u8(0x90)?;
writer.write_u8(destination)?;
writer.write_u8(busno)?;
@ -540,115 +324,30 @@ impl Packet {
writer.write_u8(length)?;
writer.write_u8(div)?;
writer.write_u8(cs)?;
}
Packet::SpiWriteRequest {
destination,
busno,
data,
} => {
},
Packet::SpiWriteRequest { destination, busno, data } => {
writer.write_u8(0x92)?;
writer.write_u8(destination)?;
writer.write_u8(busno)?;
writer.write_u32(data)?;
}
},
Packet::SpiReadRequest { destination, busno } => {
writer.write_u8(0x93)?;
writer.write_u8(destination)?;
writer.write_u8(busno)?;
}
},
Packet::SpiReadReply { succeeded, data } => {
writer.write_u8(0x94)?;
writer.write_bool(succeeded)?;
writer.write_u32(data)?;
}
},
Packet::SpiBasicReply { succeeded } => {
writer.write_u8(0x95)?;
writer.write_bool(succeeded)?;
}
},
Packet::AnalyzerHeaderRequest { destination } => {
writer.write_u8(0xa0)?;
writer.write_u8(destination)?;
}
Packet::AnalyzerHeader {
sent_bytes,
total_byte_count,
overflow_occurred,
} => {
writer.write_u8(0xa1)?;
writer.write_u32(sent_bytes)?;
writer.write_u64(total_byte_count)?;
writer.write_bool(overflow_occurred)?;
}
Packet::AnalyzerDataRequest { destination } => {
writer.write_u8(0xa2)?;
writer.write_u8(destination)?;
}
Packet::AnalyzerData { last, length, data } => {
writer.write_u8(0xa3)?;
writer.write_bool(last)?;
writer.write_u16(length)?;
writer.write_all(&data[0..length as usize])?;
}
Packet::DmaAddTraceRequest {
destination,
id,
last,
trace,
length,
} => {
writer.write_u8(0xb0)?;
writer.write_u8(destination)?;
writer.write_u32(id)?;
writer.write_bool(last)?;
// trace may be broken down to fit within drtio aux memory limit
// will be reconstructed by satellite
writer.write_u16(length)?;
writer.write_all(&trace[0..length as usize])?;
}
Packet::DmaAddTraceReply { succeeded } => {
writer.write_u8(0xb1)?;
writer.write_bool(succeeded)?;
}
Packet::DmaRemoveTraceRequest { destination, id } => {
writer.write_u8(0xb2)?;
writer.write_u8(destination)?;
writer.write_u32(id)?;
}
Packet::DmaRemoveTraceReply { succeeded } => {
writer.write_u8(0xb3)?;
writer.write_bool(succeeded)?;
}
Packet::DmaPlaybackRequest {
destination,
id,
timestamp,
} => {
writer.write_u8(0xb4)?;
writer.write_u8(destination)?;
writer.write_u32(id)?;
writer.write_u64(timestamp)?;
}
Packet::DmaPlaybackReply { succeeded } => {
writer.write_u8(0xb5)?;
writer.write_bool(succeeded)?;
}
Packet::DmaPlaybackStatus {
destination,
id,
error,
channel,
timestamp,
} => {
writer.write_u8(0xb6)?;
writer.write_u8(destination)?;
writer.write_u32(id)?;
writer.write_u8(error)?;
writer.write_u32(channel)?;
writer.write_u64(timestamp)?;
}
}
Ok(())
}
}

6
src/libboard_artiq/src/io_expander.rs
View File

@ -80,7 +80,10 @@ impl IoExpander {
_ => return Err("incorrect I/O expander index"),
};
if !io_expander.check_ack(i2c)? {
info!("MCP23017 io expander {} not found. Checking for PCA9539.", index);
info!(
"MCP23017 io expander {} not found. Checking for PCA9539.",
index
);
io_expander.address += 0xa8; // translate to PCA9539 addresses (see schematic)
io_expander.registers = Registers {
iodira: 0x06,
@ -127,7 +130,6 @@ impl IoExpander {
pub fn init(&mut self, i2c: &mut i2c::I2c) -> Result<(), &'static str> {
self.select(i2c)?;
self.update_iodir(i2c)?;
self.out_current[0] = 0x00;

51
src/libboard_artiq/src/lib.rs
View File

@ -1,38 +1,38 @@
#![no_std]
#![feature(never_type)]
extern crate core_io;
extern crate log;
extern crate crc;
extern crate embedded_hal;
extern crate core_io;
extern crate io;
extern crate libasync;
extern crate libboard_zynq;
extern crate libregister;
extern crate libconfig;
extern crate libcortex_a9;
extern crate libregister;
extern crate log;
extern crate libasync;
extern crate log_buffer;
#[path = "../../../build/pl.rs"]
pub mod pl;
pub mod drtioaux_proto;
pub mod drtio_routing;
pub mod logger;
#[cfg(has_si5324)]
pub mod si5324;
#[cfg(has_drtio)]
pub mod drtioaux;
#[cfg(has_drtio)]
pub mod drtioaux_async;
pub mod drtioaux_proto;
#[cfg(feature = "target_kasli_soc")]
pub mod io_expander;
pub mod logger;
#[cfg(has_drtio)]
#[rustfmt::skip]
#[path = "../../../build/mem.rs"]
pub mod mem;
#[rustfmt::skip]
#[path = "../../../build/pl.rs"]
pub mod pl;
#[cfg(has_si5324)]
pub mod si5324;
#[cfg(feature = "target_kasli_soc")]
pub mod io_expander;
use core::{cmp, str};
use libboard_zynq::slcr;
use libregister::RegisterW;
pub fn identifier_read(buf: &mut [u8]) -> &str {
unsafe {
@ -46,3 +46,26 @@ pub fn identifier_read(buf: &mut [u8]) -> &str {
str::from_utf8_unchecked(&buf[..len as usize])
}
}
pub fn init_gateware() {
// Set up PS->PL clocks
slcr::RegisterBlock::unlocked(|slcr| {
// As we are touching the mux, the clock may glitch, so reset the PL.
slcr.fpga_rst_ctrl.write(
slcr::FpgaRstCtrl::zeroed()
.fpga0_out_rst(true)
.fpga1_out_rst(true)
.fpga2_out_rst(true)
.fpga3_out_rst(true)
);
slcr.fpga0_clk_ctrl.write(
slcr::Fpga0ClkCtrl::zeroed()
.src_sel(slcr::PllSource::IoPll)
.divisor0(8)
.divisor1(1)
);
slcr.fpga_rst_ctrl.write(
slcr::FpgaRstCtrl::zeroed()
);
});
}

56
src/libboard_artiq/src/logger.rs
View File

@ -1,13 +1,13 @@
use core::{cell::Cell, fmt::Write};
use libboard_zynq::{println, timer::GlobalTimer};
use libcortex_a9::mutex::{Mutex, MutexGuard};
use log::{LevelFilter, Log};
use core::cell::Cell;
use core::fmt::Write;
use log::{Log, LevelFilter};
use log_buffer::LogBuffer;
use libcortex_a9::mutex::{Mutex, MutexGuard};
use libboard_zynq::{println, timer::GlobalTimer};
pub struct LogBufferRef<'a> {
buffer: MutexGuard<'a, LogBuffer<&'static mut [u8]>>,
old_log_level: LevelFilter,
buffer: MutexGuard<'a, LogBuffer<&'static mut [u8]>>,
old_log_level: LevelFilter
}
impl<'a> LogBufferRef<'a> {
@ -37,7 +37,7 @@ impl<'a> Drop for LogBufferRef<'a> {
}
pub struct BufferLogger {
buffer: Mutex<LogBuffer<&'static mut [u8]>>,
buffer: Mutex<LogBuffer<&'static mut [u8]>>,
uart_filter: Cell<LevelFilter>,
buffer_filter: Cell<LevelFilter>,
}
@ -56,7 +56,8 @@ impl BufferLogger {
pub fn register(self) {
unsafe {
LOGGER = Some(self);
log::set_logger(LOGGER.as_ref().unwrap()).expect("global logger can only be initialized once");
log::set_logger(LOGGER.as_ref().unwrap())
.expect("global logger can only be initialized once");
}
}
@ -65,7 +66,9 @@ impl BufferLogger {
}
pub fn buffer<'a>(&'a self) -> Option<LogBufferRef<'a>> {
self.buffer.try_lock().map(LogBufferRef::new)
self.buffer
.try_lock()
.map(LogBufferRef::new)
}
pub fn uart_log_level(&self) -> LevelFilter {
@ -96,36 +99,25 @@ impl Log for BufferLogger {
fn log(&self, record: &log::Record) {
if self.enabled(record.metadata()) {
let timestamp = unsafe { GlobalTimer::get() }.get_us().0;
let seconds = timestamp / 1_000_000;
let micros = timestamp % 1_000_000;
let timestamp = unsafe {
GlobalTimer::get()
}.get_us().0;
let seconds = timestamp / 1_000_000;
let micros = timestamp % 1_000_000;
if record.level() <= self.buffer_log_level() {
let mut buffer = self.buffer.lock();
writeln!(
buffer,
"[{:6}.{:06}s] {:>5}({}): {}",
seconds,
micros,
record.level(),
record.target(),
record.args()
)
.unwrap();
writeln!(buffer, "[{:6}.{:06}s] {:>5}({}): {}", seconds, micros,
record.level(), record.target(), record.args()).unwrap();
}
if record.level() <= self.uart_log_level() {
println!(
"[{:6}.{:06}s] {:>5}({}): {}",
seconds,
micros,
record.level(),
record.target(),
record.args()
);
println!("[{:6}.{:06}s] {:>5}({}): {}", seconds, micros,
record.level(), record.target(), record.args());
}
}
}
fn flush(&self) {}
fn flush(&self) {
}
}

167
src/libboard_artiq/src/si5324.rs
View File

@ -1,9 +1,7 @@
use core::result;
use embedded_hal::blocking::delay::DelayUs;
use libboard_zynq::{i2c::I2c, time::Milliseconds, timer::GlobalTimer};
use log::info;
use libboard_zynq::{i2c::I2c, timer::GlobalTimer, time::Milliseconds};
use embedded_hal::blocking::delay::DelayUs;
#[cfg(not(si5324_soft_reset))]
use crate::pl::csr;
@ -13,13 +11,9 @@ const ADDRESS: u8 = 0x68;
#[cfg(not(si5324_soft_reset))]
fn hard_reset(timer: &mut GlobalTimer) {
unsafe {
csr::si5324_rst_n::out_write(0);
}
unsafe { csr::si5324_rst_n::out_write(0); }
timer.delay_us(1_000);
unsafe {
csr::si5324_rst_n::out_write(1);
}
unsafe { csr::si5324_rst_n::out_write(1); }
timer.delay_us(10_000);
}
@ -35,7 +29,7 @@ pub struct FrequencySettings {
pub n31: u32,
pub n32: u32,
pub bwsel: u8,
pub crystal_as_ckin2: bool,
pub crystal_ref: bool
}
pub enum Input {
@ -45,52 +39,52 @@ pub enum Input {
fn map_frequency_settings(settings: &FrequencySettings) -> Result<FrequencySettings> {
if settings.nc1_ls != 0 && (settings.nc1_ls % 2) == 1 {
return Err("NC1_LS must be 0 or even");
return Err("NC1_LS must be 0 or even")
}
if settings.nc1_ls > (1 << 20) {
return Err("NC1_LS is too high");
return Err("NC1_LS is too high")
}
if (settings.n2_ls % 2) == 1 {
return Err("N2_LS must be even");
return Err("N2_LS must be even")
}
if settings.n2_ls > (1 << 20) {
return Err("N2_LS is too high");
return Err("N2_LS is too high")
}
if settings.n31 > (1 << 19) {
return Err("N31 is too high");
return Err("N31 is too high")
}
if settings.n32 > (1 << 19) {
return Err("N32 is too high");
return Err("N32 is too high")
}
let r = FrequencySettings {
n1_hs: match settings.n1_hs {
4 => 0b000,
5 => 0b001,
6 => 0b010,
7 => 0b011,
8 => 0b100,
9 => 0b101,
4 => 0b000,
5 => 0b001,
6 => 0b010,
7 => 0b011,
8 => 0b100,
9 => 0b101,
10 => 0b110,
11 => 0b111,
_ => return Err("N1_HS has an invalid value"),
_ => return Err("N1_HS has an invalid value")
},
nc1_ls: settings.nc1_ls - 1,
n2_hs: match settings.n2_hs {
4 => 0b000,
5 => 0b001,
6 => 0b010,
7 => 0b011,
8 => 0b100,
9 => 0b101,
4 => 0b000,
5 => 0b001,
6 => 0b010,
7 => 0b011,
8 => 0b100,
9 => 0b101,
10 => 0b110,
11 => 0b111,
_ => return Err("N2_HS has an invalid value"),
_ => return Err("N2_HS has an invalid value")
},
n2_ls: settings.n2_ls - 1,
n31: settings.n31 - 1,
n32: settings.n32 - 1,
bwsel: settings.bwsel,
crystal_as_ckin2: settings.crystal_as_ckin2,
crystal_ref: settings.crystal_ref
};
Ok(r)
}
@ -98,13 +92,13 @@ fn map_frequency_settings(settings: &FrequencySettings) -> Result<FrequencySetti
fn write(i2c: &mut I2c, reg: u8, val: u8) -> Result<()> {
i2c.start().unwrap();
if !i2c.write(ADDRESS << 1).unwrap() {
return Err("Si5324 failed to ack write address");
return Err("Si5324 failed to ack write address")
}
if !i2c.write(reg).unwrap() {
return Err("Si5324 failed to ack register");
return Err("Si5324 failed to ack register")
}
if !i2c.write(val).unwrap() {
return Err("Si5324 failed to ack value");
return Err("Si5324 failed to ack value")
}
i2c.stop().unwrap();
Ok(())
@ -114,10 +108,10 @@ fn write(i2c: &mut I2c, reg: u8, val: u8) -> Result<()> {
fn write_no_ack_value(i2c: &mut I2c, reg: u8, val: u8) -> Result<()> {
i2c.start().unwrap();
if !i2c.write(ADDRESS << 1).unwrap() {
return Err("Si5324 failed to ack write address");
return Err("Si5324 failed to ack write address")
}
if !i2c.write(reg).unwrap() {
return Err("Si5324 failed to ack register");
return Err("Si5324 failed to ack register")
}
i2c.write(val).unwrap();
i2c.stop().unwrap();
@ -127,22 +121,22 @@ fn write_no_ack_value(i2c: &mut I2c, reg: u8, val: u8) -> Result<()> {
fn read(i2c: &mut I2c, reg: u8) -> Result<u8> {
i2c.start().unwrap();
if !i2c.write(ADDRESS << 1).unwrap() {
return Err("Si5324 failed to ack write address");
return Err("Si5324 failed to ack write address")
}
if !i2c.write(reg).unwrap() {
return Err("Si5324 failed to ack register");
return Err("Si5324 failed to ack register")
}
i2c.restart().unwrap();
if !i2c.write((ADDRESS << 1) | 1).unwrap() {
return Err("Si5324 failed to ack read address");
return Err("Si5324 failed to ack read address")
}
let val = i2c.read(false).unwrap();
i2c.stop().unwrap();
Ok(val)
}
fn rmw<F>(i2c: &mut I2c, reg: u8, f: F) -> Result<()>
where F: Fn(u8) -> u8 {
fn rmw<F>(i2c: &mut I2c, reg: u8, f: F) -> Result<()> where
F: Fn(u8) -> u8 {
let value = read(i2c, reg)?;
write(i2c, reg, f(value))?;
Ok(())
@ -161,18 +155,18 @@ fn soft_reset(i2c: &mut I2c, timer: &mut GlobalTimer) -> Result<()> {
}
fn has_xtal(i2c: &mut I2c) -> Result<bool> {
Ok((read(i2c, 129)? & 0x01) == 0) // LOSX_INT=0
Ok((read(i2c, 129)? & 0x01) == 0) // LOSX_INT=0
}
fn has_ckin(i2c: &mut I2c, input: Input) -> Result<bool> {
match input {
Input::Ckin1 => Ok((read(i2c, 129)? & 0x02) == 0), // LOS1_INT=0
Input::Ckin2 => Ok((read(i2c, 129)? & 0x04) == 0), // LOS2_INT=0
Input::Ckin1 => Ok((read(i2c, 129)? & 0x02) == 0), // LOS1_INT=0
Input::Ckin2 => Ok((read(i2c, 129)? & 0x04) == 0), // LOS2_INT=0
}
}
fn locked(i2c: &mut I2c) -> Result<bool> {
Ok((read(i2c, 130)? & 0x01) == 0) // LOL_INT=0
Ok((read(i2c, 130)? & 0x01) == 0) // LOL_INT=0
}
fn monitor_lock(i2c: &mut I2c, timer: &mut GlobalTimer) -> Result<()> {
@ -217,11 +211,11 @@ pub fn bypass(i2c: &mut I2c, input: Input, timer: &mut GlobalTimer) -> Result<()
Input::Ckin2 => 0b01,
};
init(i2c, timer)?;
rmw(i2c, 21, |v| v & 0xfe)?; // CKSEL_PIN=0
rmw(i2c, 3, |v| (v & 0x3f) | (cksel_reg << 6))?; // CKSEL_REG
rmw(i2c, 4, |v| (v & 0x3f) | (0b00 << 6))?; // AUTOSEL_REG=b00
rmw(i2c, 6, |v| (v & 0xc0) | 0b111111)?; // SFOUT2_REG=b111 SFOUT1_REG=b111
rmw(i2c, 0, |v| (v & 0xfd) | 0x02)?; // BYPASS_REG=1
rmw(i2c, 21, |v| v & 0xfe)?; // CKSEL_PIN=0
rmw(i2c, 3, |v| (v & 0x3f) | (cksel_reg << 6))?; // CKSEL_REG
rmw(i2c, 4, |v| (v & 0x3f) | (0b00 << 6))?; // AUTOSEL_REG=b00
rmw(i2c, 6, |v| (v & 0xc0) | 0b111111)?; // SFOUT2_REG=b111 SFOUT1_REG=b111
rmw(i2c, 0, |v| (v & 0xfd) | 0x02)?; // BYPASS_REG=1
Ok(())
}
@ -233,32 +227,32 @@ pub fn setup(i2c: &mut I2c, settings: &FrequencySettings, input: Input, timer: &
};
init(i2c, timer)?;
if settings.crystal_as_ckin2 {
rmw(i2c, 0, |v| v | 0x40)?; // FREE_RUN=1
if settings.crystal_ref {
rmw(i2c, 0, |v| v | 0x40)?; // FREE_RUN=1
}
rmw(i2c, 2, |v| (v & 0x0f) | (s.bwsel << 4))?;
rmw(i2c, 21, |v| v & 0xfe)?; // CKSEL_PIN=0
rmw(i2c, 3, |v| (v & 0x2f) | (cksel_reg << 6) | 0x10)?; // CKSEL_REG, SQ_ICAL=1
rmw(i2c, 4, |v| (v & 0x3f) | (0b00 << 6))?; // AUTOSEL_REG=b00
rmw(i2c, 6, |v| (v & 0xc0) | 0b111111)?; // SFOUT2_REG=b111 SFOUT1_REG=b111
write(i2c, 25, (s.n1_hs << 5) as u8)?;
write(i2c, 31, (s.nc1_ls >> 16) as u8)?;
write(i2c, 32, (s.nc1_ls >> 8) as u8)?;
write(i2c, 33, (s.nc1_ls) as u8)?;
write(i2c, 34, (s.nc1_ls >> 16) as u8)?; // write to NC2_LS as well
write(i2c, 35, (s.nc1_ls >> 8) as u8)?;
write(i2c, 36, (s.nc1_ls) as u8)?;
write(i2c, 40, (s.n2_hs << 5) as u8 | (s.n2_ls >> 16) as u8)?;
write(i2c, 41, (s.n2_ls >> 8) as u8)?;
write(i2c, 42, (s.n2_ls) as u8)?;
write(i2c, 43, (s.n31 >> 16) as u8)?;
write(i2c, 44, (s.n31 >> 8) as u8)?;
write(i2c, 45, (s.n31) as u8)?;
write(i2c, 46, (s.n32 >> 16) as u8)?;
write(i2c, 47, (s.n32 >> 8) as u8)?;
write(i2c, 48, (s.n32) as u8)?;
rmw(i2c, 137, |v| v | 0x01)?; // FASTLOCK=1
rmw(i2c, 136, |v| v | 0x40)?; // ICAL=1
rmw(i2c, 2, |v| (v & 0x0f) | (s.bwsel << 4))?;
rmw(i2c, 21, |v| v & 0xfe)?; // CKSEL_PIN=0
rmw(i2c, 3, |v| (v & 0x2f) | (cksel_reg << 6) | 0x10)?; // CKSEL_REG, SQ_ICAL=1
rmw(i2c, 4, |v| (v & 0x3f) | (0b00 << 6))?; // AUTOSEL_REG=b00
rmw(i2c, 6, |v| (v & 0xc0) | 0b111111)?; // SFOUT2_REG=b111 SFOUT1_REG=b111
write(i2c, 25, (s.n1_hs << 5 ) as u8)?;
write(i2c, 31, (s.nc1_ls >> 16) as u8)?;
write(i2c, 32, (s.nc1_ls >> 8 ) as u8)?;
write(i2c, 33, (s.nc1_ls) as u8)?;
write(i2c, 34, (s.nc1_ls >> 16) as u8)?; // write to NC2_LS as well
write(i2c, 35, (s.nc1_ls >> 8 ) as u8)?;
write(i2c, 36, (s.nc1_ls) as u8)?;
write(i2c, 40, (s.n2_hs << 5 ) as u8 | (s.n2_ls >> 16) as u8)?;
write(i2c, 41, (s.n2_ls >> 8 ) as u8)?;
write(i2c, 42, (s.n2_ls) as u8)?;
write(i2c, 43, (s.n31 >> 16) as u8)?;
write(i2c, 44, (s.n31 >> 8) as u8)?;
write(i2c, 45, (s.n31) as u8)?;
write(i2c, 46, (s.n32 >> 16) as u8)?;
write(i2c, 47, (s.n32 >> 8) as u8)?;
write(i2c, 48, (s.n32) as u8)?;
rmw(i2c, 137, |v| v | 0x01)?; // FASTLOCK=1
rmw(i2c, 136, |v| v | 0x40)?; // ICAL=1
if !has_xtal(i2c)? {
return Err("Si5324 misses XA/XB signal");
@ -276,7 +270,7 @@ pub fn select_input(i2c: &mut I2c, input: Input, timer: &mut GlobalTimer) -> Res
Input::Ckin1 => 0b00,
Input::Ckin2 => 0b01,
};
rmw(i2c, 3, |v| (v & 0x3f) | (cksel_reg << 6))?;
rmw(i2c, 3, |v| (v & 0x3f) | (cksel_reg << 6))?;
if !has_ckin(i2c, input)? {
return Err("Si5324 misses clock input signal");
}
@ -291,12 +285,12 @@ pub mod siphaser {
pub fn select_recovered_clock(i2c: &mut I2c, rc: bool, timer: &mut GlobalTimer) -> Result<()> {
let val = read(i2c, 3)?;
write(i2c, 3, (val & 0xdf) | (1 << 5))?; // DHOLD=1
write(i2c, 3, (val & 0xdf) | (1 << 5))?; // DHOLD=1
unsafe {
csr::siphaser::switch_clocks_write(if rc { 1 } else { 0 });
}
let val = read(i2c, 3)?;
write(i2c, 3, (val & 0xdf) | (0 << 5))?; // DHOLD=0
write(i2c, 3, (val & 0xdf) | (0 << 5))?; // DHOLD=0
monitor_lock(i2c, timer)?;
Ok(())
}
@ -315,7 +309,9 @@ pub mod siphaser {
csr::siphaser::error_write(1);
}
timer.delay_us(5_000);
unsafe { csr::siphaser::error_read() != 0 }
unsafe {
csr::siphaser::error_read() != 0
}
}
fn find_edge(target: bool, timer: &mut GlobalTimer) -> Result<u32> {
@ -344,19 +340,14 @@ pub mod siphaser {
}
let width = find_edge(true, timer)? + jitter_margin;
// width is 360 degrees (one full rotation of the phase between s/h limits) minus jitter
info!(
"calibration successful, lead: {}, width: {} ({}deg)",
lead,
width,
width * 360 / (56 * 8)
);
info!("calibration successful, lead: {}, width: {} ({}deg)", lead, width, width*360/(56*8));
// Apply reverse phase shift for half the width to get into the
// middle of the working region.
for _ in 0..width / 2 {
for _ in 0..width/2 {
phase_shift(0, timer);
}
Ok(())
}
}
}

9
src/libbuild_zynq/lib.rs
View File

@ -1,7 +1,8 @@
use std::{env,
fs::File,
io::{BufRead, BufReader, Write},
path::PathBuf};
use std::env;
use std::fs::File;
use std::io::{BufRead, BufReader, Write};
use std::path::PathBuf;
pub fn add_linker_script() {
// Put the linker script somewhere the linker can find it

7
src/libc/build.rs
View File

@ -4,7 +4,8 @@ fn main() {
}
mod libc {
use std::{env, path::Path};
use std::path::Path;
use std::env;
pub fn compile() {
let cfg = &mut cc::Build::new();
@ -31,7 +32,9 @@ mod libc {
cfg.flag("-U_FORTIFY_SOURCE");
cfg.define("_FORTIFY_SOURCE", Some("0"));
let sources = vec!["printf.c"];
let sources = vec![
"printf.c"
];
let root = Path::new("./");
for src in sources {

28
src/libdwarf/src/eh.rs
View File

@ -11,11 +11,9 @@
#![allow(non_upper_case_globals)]
#![allow(unused)]
use core::mem;
use cslice::CSlice;
use crate::DwarfReader;
use core::mem;
use cslice::CSlice;
pub const DW_EH_PE_omit: u8 = 0xFF;
pub const DW_EH_PE_absptr: u8 = 0x00;
@ -162,11 +160,15 @@ pub unsafe fn find_eh_action(
if ar_filter == 0 {
saw_cleanup = true;
} else if ar_filter > 0 {
let catch_type =
get_ttype_entry(ar_filter as usize, ttype_encoding, ttype_base, ttype_table)?;
let catch_type = get_ttype_entry(
ar_filter as usize,
ttype_encoding,
ttype_base,
ttype_table,
)?;
match catch_type {
Some(clause_ptr) if *(clause_ptr as *const u32) == id => {
return Ok(EHAction::Catch(lpad));
return Ok(EHAction::Catch(lpad))
}
None => return Ok(EHAction::Catch(lpad)),
_ => {}
@ -249,11 +251,19 @@ fn get_base(encoding: u8, context: &EHContext<'_>) -> Result<usize, ()> {
}
}
unsafe fn read_encoded_pointer(reader: &mut DwarfReader, context: &EHContext<'_>, encoding: u8) -> Result<usize, ()> {
unsafe fn read_encoded_pointer(
reader: &mut DwarfReader,
context: &EHContext<'_>,
encoding: u8,
) -> Result<usize, ()> {
read_encoded_pointer_with_base(reader, encoding, get_base(encoding, context)?)
}
unsafe fn read_encoded_pointer_with_base(reader: &mut DwarfReader, encoding: u8, base: usize) -> Result<usize, ()> {
unsafe fn read_encoded_pointer_with_base(
reader: &mut DwarfReader,
encoding: u8,
base: usize,
) -> Result<usize, ()> {
if encoding == DW_EH_PE_omit {
return Err(());
}

195
src/libdyld/src/elf.rs
View File

@ -1451,7 +1451,8 @@ pub const R_AARCH64_TLSDESC_CALL: usize = 569;
pub const R_AARCH64_TLSLE_LDST128_TPREL_LO12: usize = 570;
pub const R_AARCH64_TLSLE_LDST128_TPREL_LO12_NC: usize = 571;
pub const R_AARCH64_TLSLD_LDST128_DTPREL_LO12: usize = 572;
pub const R_AARCH64_TLSLD_LDST128_DTPREL_LO12_NC: usize = 573;
pub const R_AARCH64_TLSLD_LDST128_DTPREL_LO12_NC: usize =
573;
pub const R_AARCH64_COPY: usize = 1024;
pub const R_AARCH64_GLOB_DAT: usize = 1025;
pub const R_AARCH64_JUMP_SLOT: usize = 1026;
@ -2266,9 +2267,7 @@ pub struct Elf32_Ehdr {
pub e_shstrndx: Elf32_Half,
}
impl Clone for Elf32_Ehdr {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2289,9 +2288,7 @@ pub struct Elf64_Ehdr {
pub e_shstrndx: Elf64_Half,
}
impl Clone for Elf64_Ehdr {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2308,9 +2305,7 @@ pub struct Elf32_Shdr {
pub sh_entsize: Elf32_Word,
}
impl Clone for Elf32_Shdr {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2327,9 +2322,7 @@ pub struct Elf64_Shdr {
pub sh_entsize: Elf64_Xword,
}
impl Clone for Elf64_Shdr {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2342,9 +2335,7 @@ pub struct Elf32_Sym {
pub st_shndx: Elf32_Section,
}
impl Clone for Elf32_Sym {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2357,9 +2348,7 @@ pub struct Elf64_Sym {
pub st_size: Elf64_Xword,
}
impl Clone for Elf64_Sym {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2368,9 +2357,7 @@ pub struct Elf32_Syminfo {
pub si_flags: Elf32_Half,
}
impl Clone for Elf32_Syminfo {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2379,9 +2366,7 @@ pub struct Elf64_Syminfo {
pub si_flags: Elf64_Half,
}
impl Clone for Elf64_Syminfo {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2390,9 +2375,7 @@ pub struct Elf32_Rel {
pub r_info: Elf32_Word,
}
impl Clone for Elf32_Rel {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2401,9 +2384,7 @@ pub struct Elf64_Rel {
pub r_info: Elf64_Xword,
}
impl Clone for Elf64_Rel {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2413,9 +2394,7 @@ pub struct Elf32_Rela {
pub r_addend: Elf32_Sword,
}
impl Clone for Elf32_Rela {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2425,9 +2404,7 @@ pub struct Elf64_Rela {
pub r_addend: Elf64_Sxword,
}
impl Clone for Elf64_Rela {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2442,9 +2419,7 @@ pub struct Elf32_Phdr {
pub p_align: Elf32_Word,
}
impl Clone for Elf32_Phdr {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2459,9 +2434,7 @@ pub struct Elf64_Phdr {
pub p_align: Elf64_Xword,
}
impl Clone for Elf64_Phdr {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Copy)]
@ -2476,14 +2449,10 @@ pub union Elf32_Dyn__bindgen_ty_1 {
pub d_ptr: Elf32_Addr,
}
impl Clone for Elf32_Dyn__bindgen_ty_1 {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
impl Clone for Elf32_Dyn {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Copy)]
@ -2498,14 +2467,10 @@ pub union Elf64_Dyn__bindgen_ty_1 {
pub d_ptr: Elf64_Addr,
}
impl Clone for Elf64_Dyn__bindgen_ty_1 {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
impl Clone for Elf64_Dyn {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2519,9 +2484,7 @@ pub struct Elf32_Verdef {
pub vd_next: Elf32_Word,
}
impl Clone for Elf32_Verdef {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2535,9 +2498,7 @@ pub struct Elf64_Verdef {
pub vd_next: Elf64_Word,
}
impl Clone for Elf64_Verdef {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2546,9 +2507,7 @@ pub struct Elf32_Verdaux {
pub vda_next: Elf32_Word,
}
impl Clone for Elf32_Verdaux {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2557,9 +2516,7 @@ pub struct Elf64_Verdaux {
pub vda_next: Elf64_Word,
}
impl Clone for Elf64_Verdaux {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2571,9 +2528,7 @@ pub struct Elf32_Verneed {
pub vn_next: Elf32_Word,
}
impl Clone for Elf32_Verneed {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2585,9 +2540,7 @@ pub struct Elf64_Verneed {
pub vn_next: Elf64_Word,
}
impl Clone for Elf64_Verneed {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2599,9 +2552,7 @@ pub struct Elf32_Vernaux {
pub vna_next: Elf32_Word,
}
impl Clone for Elf32_Vernaux {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2613,9 +2564,7 @@ pub struct Elf64_Vernaux {
pub vna_next: Elf64_Word,
}
impl Clone for Elf64_Vernaux {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Copy)]
@ -2629,14 +2578,10 @@ pub union Elf32_auxv_t__bindgen_ty_1 {
pub a_val: u32,
}
impl Clone for Elf32_auxv_t__bindgen_ty_1 {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
impl Clone for Elf32_auxv_t {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Copy)]
@ -2650,14 +2595,10 @@ pub union Elf64_auxv_t__bindgen_ty_1 {
pub a_val: u64,
}
impl Clone for Elf64_auxv_t__bindgen_ty_1 {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
impl Clone for Elf64_auxv_t {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2667,9 +2608,7 @@ pub struct Elf32_Nhdr {
pub n_type: Elf32_Word,
}
impl Clone for Elf32_Nhdr {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2679,9 +2618,7 @@ pub struct Elf64_Nhdr {
pub n_type: Elf64_Word,
}
impl Clone for Elf64_Nhdr {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2693,9 +2630,7 @@ pub struct Elf32_Move {
pub m_stride: Elf32_Half,
}
impl Clone for Elf32_Move {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2707,9 +2642,7 @@ pub struct Elf64_Move {
pub m_stride: Elf64_Half,
}
impl Clone for Elf64_Move {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Copy)]
@ -2724,9 +2657,7 @@ pub struct Elf32_gptab__bindgen_ty_1 {
pub gt_unused: Elf32_Word,
}
impl Clone for Elf32_gptab__bindgen_ty_1 {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2735,14 +2666,10 @@ pub struct Elf32_gptab__bindgen_ty_2 {
pub gt_bytes: Elf32_Word,
}
impl Clone for Elf32_gptab__bindgen_ty_2 {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
impl Clone for Elf32_gptab {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2752,9 +2679,7 @@ pub struct Elf32_RegInfo {
pub ri_gp_value: Elf32_Sword,
}
impl Clone for Elf32_RegInfo {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2765,9 +2690,7 @@ pub struct Elf_Options {
pub info: Elf32_Word,
}
impl Clone for Elf_Options {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2776,9 +2699,7 @@ pub struct Elf_Options_Hw {
pub hwp_flags2: Elf32_Word,
}
impl Clone for Elf_Options_Hw {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2790,9 +2711,7 @@ pub struct Elf32_Lib {
pub l_flags: Elf32_Word,
}
impl Clone for Elf32_Lib {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
#[repr(C)]
#[derive(Debug, Copy)]
@ -2804,31 +2723,17 @@ pub struct Elf64_Lib {
pub l_flags: Elf64_Word,
}
impl Clone for Elf64_Lib {
fn clone(&self) -> Self {
*self
}
fn clone(&self) -> Self { *self }
}
pub type Elf32_Conflict = Elf32_Addr;
#[repr(C)]
#[derive(Clone, Copy)]
pub struct EXIDX_Entry(u32, u32);
pub fn ELF32_R_SYM(info: Elf32_Word) -> Elf32_Word {
info >> 8
}
pub fn ELF32_R_TYPE(info: Elf32_Word) -> u8 {
info as u8
}
pub fn ELF32_R_INFO(sym: Elf32_Word, ty: u8) -> Elf32_Word {
sym << 8 | ty as Elf32_Word
}
pub fn ELF32_R_SYM(info: Elf32_Word) -> Elf32_Word { info >> 8 }
pub fn ELF32_R_TYPE(info: Elf32_Word) -> u8 { info as u8 }
pub fn ELF32_R_INFO(sym: Elf32_Word, ty: u8) -> Elf32_Word { sym << 8 | ty as Elf32_Word }
pub fn ELF32_ST_BIND(info: u8) -> u8 {
info >> 4
}
pub fn ELF32_ST_TYPE(info: u8) -> u8 {
info & 0xf
}
pub fn ELF32_ST_INFO(bind: u8, ty: u8) -> u8 {
(bind << 4) | (ty & 0xf)
}
pub fn ELF32_ST_BIND(info: u8) -> u8 { info >> 4 }
pub fn ELF32_ST_TYPE(info: u8) -> u8 { info & 0xf }
pub fn ELF32_ST_INFO(bind: u8, ty: u8) -> u8 { (bind << 4) | (ty & 0xf) }

54
src/libdyld/src/file.rs
View File

@ -1,8 +1,8 @@
use core::{mem,
ops::{Deref, Range},
ptr};
use super::{elf::*, Arch};
use core::{mem, ptr, ops::{Deref, Range}};
use super::{
Arch,
elf::*,
};
fn read_unaligned<T: Copy>(data: &[u8], offset: usize) -> Option<T> {
if data.len() < offset + mem::size_of::<T>() {
@ -31,40 +31,14 @@ impl<'a> File<'a> {
pub fn arch(&self) -> Option<Arch> {
const IDENT_OPENRISC: [u8; EI_NIDENT] = [
ELFMAG0,
ELFMAG1,
ELFMAG2,
ELFMAG3,
ELFCLASS32,
ELFDATA2MSB,
EV_CURRENT,
ELFOSABI_NONE,
/* ABI version */ 0,
/* padding */ 0,
0,
0,
0,
0,
0,
0,
ELFMAG0, ELFMAG1, ELFMAG2, ELFMAG3,
ELFCLASS32, ELFDATA2MSB, EV_CURRENT, ELFOSABI_NONE,
/* ABI version */ 0, /* padding */ 0, 0, 0, 0, 0, 0, 0
];
const IDENT_ARM: [u8; EI_NIDENT] = [
ELFMAG0,
ELFMAG1,
ELFMAG2,
ELFMAG3,
ELFCLASS32,
ELFDATA2LSB,
EV_CURRENT,
ELFOSABI_NONE,
/* ABI version */ 0,
/* padding */ 0,
0,
0,
0,
0,
0,
0,
ELFMAG0, ELFMAG1, ELFMAG2, ELFMAG3,
ELFCLASS32, ELFDATA2LSB, EV_CURRENT, ELFOSABI_NONE,
/* ABI version */ 0, /* padding */ 0, 0, 0, 0, 0, 0, 0
];
match (self.ehdr.e_ident, self.ehdr.e_machine) {
@ -74,14 +48,16 @@ impl<'a> File<'a> {
}
}
pub fn program_headers<'b>(&'b self) -> impl Iterator<Item = Option<Elf32_Phdr>> + 'b {
pub fn program_headers<'b>(&'b self) -> impl Iterator<Item = Option<Elf32_Phdr>> + 'b
{
(0..self.ehdr.e_phnum).map(move |i| {
let phdr_off = self.ehdr.e_phoff as usize + mem::size_of::<Elf32_Phdr>() * i as usize;
self.read_unaligned::<Elf32_Phdr>(phdr_off)
})
}
pub fn section_headers<'b>(&'b self) -> impl Iterator<Item = Option<Elf32_Shdr>> + 'b {
pub fn section_headers<'b>(&'b self) -> impl Iterator<Item = Option<Elf32_Shdr>> + 'b
{
(0..self.ehdr.e_shnum).map(move |i| {
let shdr_off = self.ehdr.e_shoff as usize + mem::size_of::<Elf32_Shdr>() * i as usize;
self.read_unaligned::<Elf32_Shdr>(shdr_off)

103
src/libdyld/src/image.rs
View File

@ -1,9 +1,13 @@
use core::{
ops::{Deref, DerefMut, Range},
mem,
slice,
};
use alloc::alloc::{alloc_zeroed, dealloc, Layout, LayoutError};
use core::{mem,
ops::{Deref, DerefMut, Range},
slice};
use super::{elf::*, Error};
use super::{
elf::*,
Error,
};
pub struct DynamicSection {
pub strtab: Range<usize>,
@ -30,12 +34,17 @@ impl Image {
slice::from_raw_parts_mut(ptr, size)
};
Ok(Image { layout, data })
Ok(Image {
layout,
data,
})
}
/// assumes that self.data is properly aligned
pub(crate) fn get_ref<T>(&self, offset: usize) -> Option<&T>
where T: Copy {
where
T: Copy,
{
if self.data.len() < offset + mem::size_of::<T>() {
None
} else if (self.data.as_ptr() as usize + offset) & (mem::align_of::<T>() - 1) != 0 {
@ -57,53 +66,55 @@ impl Image {
unsafe { slice::from_raw_parts(ptr, len) }
}
fn dyn_headers<'a>(&'a self, range: Range<usize>) -> impl Iterator<Item = &'a Elf32_Dyn> + 'a {
fn dyn_headers<'a>(&'a self, range: Range<usize>) ->
impl Iterator<Item = &'a Elf32_Dyn> + 'a
{
range
.step_by(mem::size_of::<Elf32_Dyn>())
.filter_map(move |offset| self.get_ref::<Elf32_Dyn>(offset))
.filter_map(move |offset| {
self.get_ref::<Elf32_Dyn>(offset)
})
.take_while(|d| unsafe { d.d_un.d_val } as i32 != DT_NULL)
}
pub fn dyn_section(&self, range: Range<usize>) -> Result<DynamicSection, Error> {
let (mut strtab_off, mut strtab_sz) = (0, 0);
let (mut rel_off, mut rel_sz) = (0, 0);
let (mut rela_off, mut rela_sz) = (0, 0);
let (mut rel_off, mut rel_sz) = (0, 0);
let (mut rela_off, mut rela_sz) = (0, 0);
let (mut pltrel_off, mut pltrel_sz) = (0, 0);
let (mut hash_off, mut hash_sz) = (0, 0);
let (mut hash_off, mut hash_sz) = (0, 0);
let mut symtab_off = 0;
let mut sym_ent = 0;
let mut rel_ent = 0;
let mut rela_ent = 0;
let mut nbucket = 0;
let mut nchain = 0;
let mut sym_ent = 0;
let mut rel_ent = 0;
let mut rela_ent = 0;
let mut nbucket = 0;
let mut nchain = 0;
for dyn_header in self.dyn_headers(range) {
let val = unsafe { dyn_header.d_un.d_val } as usize;
match dyn_header.d_tag {
DT_NULL => break,
DT_STRTAB => strtab_off = val,
DT_STRSZ => strtab_sz = val,
DT_SYMTAB => symtab_off = val,
DT_SYMENT => sym_ent = val,
DT_REL => rel_off = val,
DT_RELSZ => rel_sz = val,
DT_RELENT => rel_ent = val,
DT_RELA => rela_off = val,
DT_RELASZ => rela_sz = val,
DT_RELAENT => rela_ent = val,
DT_JMPREL => pltrel_off = val,
DT_PLTRELSZ => pltrel_sz = val,
DT_HASH => {
nbucket = *self
.get_ref::<Elf32_Word>(val + 0)
DT_NULL => break,
DT_STRTAB => strtab_off = val,
DT_STRSZ => strtab_sz = val,
DT_SYMTAB => symtab_off = val,
DT_SYMENT => sym_ent = val,
DT_REL => rel_off = val,
DT_RELSZ => rel_sz = val,
DT_RELENT => rel_ent = val,
DT_RELA => rela_off = val,
DT_RELASZ => rela_sz = val,
DT_RELAENT => rela_ent = val,
DT_JMPREL => pltrel_off = val,
DT_PLTRELSZ => pltrel_sz = val,
DT_HASH => {
nbucket = *self.get_ref::<Elf32_Word>(val + 0)
.ok_or("cannot read hash bucket count")? as usize;
nchain = *self
.get_ref::<Elf32_Word>(val + 4)
nchain = *self.get_ref::<Elf32_Word>(val + 4)
.ok_or("cannot read hash chain count")? as usize;
hash_off = val + 8;
hash_sz = (nbucket + nchain) * mem::size_of::<Elf32_Word>();
hash_sz = (nbucket + nchain) * mem::size_of::<Elf32_Word>();
}
_ => (),
_ => ()
}
}
@ -112,28 +123,28 @@ impl Image {
let symtab_sz = nchain * mem::size_of::<Elf32_Sym>();
if strtab_off + strtab_sz > self.data.len() {
return Err("invalid strtab offset/size")?;
return Err("invalid strtab offset/size")?
}
if symtab_off + symtab_sz > self.data.len() {
return Err("invalid symtab offset/size")?;
return Err("invalid symtab offset/size")?
}
if sym_ent != mem::size_of::<Elf32_Sym>() {
return Err("incorrect symbol entry size")?;
return Err("incorrect symbol entry size")?
}
if rel_off + rel_sz > self.data.len() {
return Err("invalid rel offset/size")?;
return Err("invalid rel offset/size")?
}
if rel_ent != 0 && rel_ent != mem::size_of::<Elf32_Rel>() {
return Err("incorrect relocation entry size")?;
return Err("incorrect relocation entry size")?
}
if rela_off + rela_sz > self.data.len() {
return Err("invalid rela offset/size")?;
return Err("invalid rela offset/size")?
}
if rela_ent != 0 && rela_ent != mem::size_of::<Elf32_Rela>() {
return Err("incorrect relocation entry size")?;
return Err("incorrect relocation entry size")?
}
if pltrel_off + pltrel_sz > self.data.len() {
return Err("invalid pltrel offset/size")?;
return Err("invalid pltrel offset/size")?
}
Ok(DynamicSection {
@ -154,7 +165,7 @@ impl Image {
pub fn write(&self, offset: usize, value: Elf32_Word) -> Result<(), Error> {
if offset + mem::size_of::<Elf32_Addr>() > self.data.len() {
return Err("relocation out of image bounds")?;
return Err("relocation out of image bounds")?
}
let ptr = (self.data.as_ptr() as usize + offset) as *mut Elf32_Addr;

115
src/libdyld/src/lib.rs
View File

@ -1,14 +1,13 @@
#![no_std]
extern crate alloc;
extern crate libcortex_a9;
extern crate log;
extern crate libcortex_a9;
use alloc::string::String;
use core::{convert, fmt, ops::Range, str};
use elf::*;
use alloc::string::String;
use log::{debug, trace};
use elf::*;
pub mod elf;
mod file;
@ -22,10 +21,11 @@ pub enum Arch {
OpenRisc,
}
#[derive(Debug)]
pub enum Error {
Parsing(&'static str),
Lookup(String),
Lookup(String)
}
impl convert::From<&'static str> for Error {
@ -37,8 +37,10 @@ impl convert::From<&'static str> for Error {
impl fmt::Display for Error {
fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
match self {
&Error::Parsing(desc) => write!(f, "parse error: {}", desc),
&Error::Lookup(ref sym) => write!(f, "symbol lookup error: {}", sym),
&Error::Parsing(desc) =>
write!(f, "parse error: {}", desc),
&Error::Lookup(ref sym) =>
write!(f, "symbol lookup error: {}", sym),
}
}
}
@ -101,22 +103,20 @@ impl Library {
let mut index = self.hash_bucket()[hash as usize % self.hash_bucket().len()] as usize;
loop {
if index == STN_UNDEF {
return None;
}
if index == STN_UNDEF { return None }
let sym = &self.symtab()[index];
let sym_name_off = sym.st_name as usize;
match self.strtab().get(sym_name_off..sym_name_off + name.len()) {
Some(sym_name) if sym_name == name => {
if ELF32_ST_BIND(sym.st_info) & STB_GLOBAL == 0 {
return None;
return None
}
match sym.st_shndx {
SHN_UNDEF => return None,
SHN_ABS => return Some(self.image.ptr() as u32 + sym.st_value),
_ => return Some(self.image.ptr() as u32 + sym.st_value),
_ => return Some(self.image.ptr() as u32 + sym.st_value)
}
}
_ => (),
@ -127,16 +127,10 @@ impl Library {
}
pub fn name_starting_at(&self, offset: usize) -> Result<&[u8], Error> {
let size = self
.strtab()
.iter()
.skip(offset)
.position(|&x| x == 0)
.ok_or("symbol in symbol table not null-terminated")?;
Ok(self
.strtab()
.get(offset..offset + size)
.ok_or("cannot read symbol name")?)
let size = self.strtab().iter().skip(offset).position(|&x| x == 0)
.ok_or("symbol in symbol table not null-terminated")?;
Ok(self.strtab().get(offset..offset + size)
.ok_or("cannot read symbol name")?)
}
/// Rebind Rela by `name` to a new `addr`
@ -149,59 +143,53 @@ impl Library {
}
}
pub fn load(data: &[u8], resolve: &dyn Fn(&[u8]) -> Option<Elf32_Word>) -> Result<Library, Error> {
pub fn load(
data: &[u8],
resolve: &dyn Fn(&[u8]) -> Option<Elf32_Word>
) -> Result<Library, Error> {
// validate ELF file
let file = file::File::new(data).ok_or("cannot read ELF header")?;
let file = file::File::new(data)
.ok_or("cannot read ELF header")?;
if file.ehdr.e_type != ET_DYN {
return Err("not a shared library")?;
return Err("not a shared library")?
}
let arch = file.arch().ok_or("not for a supported architecture")?;
let arch = file.arch()
.ok_or("not for a supported architecture")?;
// prepare target memory
let image_size = file
.program_headers()
let image_size = file.program_headers()
.filter_map(|phdr| phdr.map(|phdr| phdr.p_vaddr + phdr.p_memsz))
.max()
.unwrap_or(0) as usize;
let image_align = file
.program_headers()
.filter_map(|phdr| {
phdr.and_then(|phdr| {
if phdr.p_type == PT_LOAD {
Some(phdr.p_align)
} else {
None
}
})
})
let image_align = file.program_headers()
.filter_map(|phdr| phdr.and_then(|phdr| {
if phdr.p_type == PT_LOAD {
Some(phdr.p_align)
} else {
None
}
}))
.max()
.unwrap_or(4) as usize;
// 1 image for all segments
let mut image = image::Image::new(image_size, image_align).map_err(|_| "cannot allocate target image")?;
debug!(
"ELF target: {} bytes, align to {:X}, allocated at {:08X}",
image_size,
image_align,
image.ptr() as usize
);
let mut image = image::Image::new(image_size, image_align)
.map_err(|_| "cannot allocate target image")?;
debug!("ELF target: {} bytes, align to {:X}, allocated at {:08X}", image_size, image_align, image.ptr() as usize);
// LOAD
for phdr in file.program_headers() {
let phdr = phdr.ok_or("cannot read program header")?;
trace!(
"Program header: {:08X}+{:08X} to {:08X}",
phdr.p_offset,
phdr.p_filesz,
image.ptr() as u32
trace!("Program header: {:08X}+{:08X} to {:08X}",
phdr.p_offset, phdr.p_filesz,
image.ptr() as u32
);
let file_range = phdr.p_offset as usize..(phdr.p_offset + phdr.p_filesz) as usize;
match phdr.p_type {
PT_LOAD => {
let src = file
.get(file_range)
let src = file.get(file_range)
.ok_or("program header requests an out of bounds load (in file)")?;
let dst = image
.get_mut(phdr.p_vaddr as usize..(phdr.p_vaddr + phdr.p_filesz) as usize)
let dst = image.get_mut(phdr.p_vaddr as usize..
(phdr.p_vaddr + phdr.p_filesz) as usize)
.ok_or("program header requests an out of bounds load (in target)")?;
dst.copy_from_slice(src);
}
@ -215,9 +203,9 @@ pub fn load(data: &[u8], resolve: &dyn Fn(&[u8]) -> Option<Elf32_Word>) -> Resul
let shdr = shdr.ok_or("cannot read section header")?;
match shdr.sh_type as usize {
SHT_ARM_EXIDX => {
let range = shdr.sh_addr as usize..(shdr.sh_addr + shdr.sh_size) as usize;
let _ = image
.get(range.clone())
let range = shdr.sh_addr as usize..
(shdr.sh_addr + shdr.sh_size) as usize;
let _ = image.get(range.clone())
.ok_or("section header specifies EXIDX outside of image (in target)")?;
exidx = Some(range);
}
@ -226,14 +214,11 @@ pub fn load(data: &[u8], resolve: &dyn Fn(&[u8]) -> Option<Elf32_Word>) -> Resul
}
// relocate DYNAMIC
let dyn_range = file.dyn_header_vaddr().ok_or("cannot find a dynamic header")?;
let dyn_range = file.dyn_header_vaddr()
.ok_or("cannot find a dynamic header")?;
let dyn_section = image.dyn_section(dyn_range.clone())?;
debug!(
"Relocating {} rela, {} rel, {} pltrel",
dyn_section.rela.len(),
dyn_section.rel.len(),
dyn_section.pltrel.len()
);
debug!("Relocating {} rela, {} rel, {} pltrel",
dyn_section.rela.len(), dyn_section.rel.len(), dyn_section.pltrel.len());
let lib = Library {
arch,
image,

94
src/libdyld/src/reloc.rs
View File

@ -1,10 +1,16 @@
use alloc::string::String;
use libcortex_a9::{asm::{dsb, isb},
cache::{bpiall, dcci_slice, iciallu}};
use log::trace;
use super::{elf::*, image::Image, Arch, Error, Library};
use super::{
Arch,
elf::*,
Error,
image::Image,
Library,
};
use libcortex_a9::{
cache::{dcci_slice, iciallu, bpiall},
asm::{dsb, isb},
};
pub trait Relocatable {
fn offset(&self) -> usize;
@ -60,18 +66,25 @@ enum RelType {
impl RelType {
pub fn new(arch: Arch, type_info: u8) -> Option<Self> {
match type_info {
R_OR1K_NONE if arch == Arch::OpenRisc => Some(RelType::None),
R_ARM_NONE if arch == Arch::Arm => Some(RelType::None),
R_OR1K_NONE if arch == Arch::OpenRisc =>
Some(RelType::None),
R_ARM_NONE if arch == Arch::Arm =>
Some(RelType::None),
R_OR1K_RELATIVE if arch == Arch::OpenRisc => Some(RelType::Relative),
R_ARM_RELATIVE if arch == Arch::Arm => Some(RelType::Relative),
R_OR1K_RELATIVE if arch == Arch::OpenRisc =>
Some(RelType::Relative),
R_ARM_RELATIVE if arch == Arch::Arm =>
Some(RelType::Relative),
R_OR1K_32 | R_OR1K_GLOB_DAT | R_OR1K_JMP_SLOT if arch == Arch::OpenRisc => Some(RelType::LookupAbs),
R_ARM_GLOB_DAT | R_ARM_JUMP_SLOT | R_ARM_ABS32 if arch == Arch::Arm => Some(RelType::LookupAbs),
R_OR1K_32 | R_OR1K_GLOB_DAT | R_OR1K_JMP_SLOT
if arch == Arch::OpenRisc => Some(RelType::LookupAbs),
R_ARM_GLOB_DAT | R_ARM_JUMP_SLOT | R_ARM_ABS32
if arch == Arch::Arm => Some(RelType::LookupAbs),
R_ARM_PREL31 if arch == Arch::Arm => Some(RelType::LookupRel),
_ => None,
_ =>
None
}
}
}
@ -83,25 +96,22 @@ fn format_sym_name(sym_name: &[u8]) -> String {
}
pub fn relocate<R: Relocatable>(
arch: Arch,
lib: &Library,
rel: &R,
resolve: &dyn Fn(&[u8]) -> Option<Elf32_Word>,
arch: Arch, lib: &Library,
rel: &R, resolve: &dyn Fn(&[u8]) -> Option<Elf32_Word>
) -> Result<(), Error> {
let sym;
if rel.sym_info() == 0 {
sym = None;
} else {
sym = Some(
lib.symtab()
.get(rel.sym_info() as usize)
.ok_or("symbol out of bounds of symbol table")?,
)
sym = Some(lib.symtab().get(rel.sym_info() as usize)
.ok_or("symbol out of bounds of symbol table")?)
}
let rel_type = RelType::new(arch, rel.type_info()).ok_or("unsupported relocation type")?;
let rel_type = RelType::new(arch, rel.type_info())
.ok_or("unsupported relocation type")?;
let value = match rel_type {
RelType::None => return Ok(()),
RelType::None =>
return Ok(()),
RelType::Relative => {
let addend = rel.addend(&lib.image);
@ -122,48 +132,42 @@ pub fn relocate<R: Relocatable>(
addr
} else {
// We couldn't find it anywhere.
return Err(Error::Lookup(format_sym_name(sym_name)));
return Err(Error::Lookup(format_sym_name(sym_name)))
};
match rel_type {
RelType::LookupAbs => sym_addr,
RelType::LookupRel => {
sym_addr.wrapping_sub(lib.image.ptr().wrapping_offset(rel.offset() as isize) as Elf32_Addr)
}
_ => unreachable!(),
RelType::LookupRel =>
sym_addr.wrapping_sub(
lib.image.ptr().wrapping_offset(rel.offset() as isize) as Elf32_Addr),
_ => unreachable!()
}
}
};
match rel.type_info() {
R_ARM_PREL31 => {
let reloc_word = lib
.image
.get_ref::<Elf32_Word>(rel.offset())
.ok_or("relocation offset cannot be read")?;
lib.image
.write(rel.offset(), (reloc_word & 0x80000000) | (value & 0x7FFFFFFF))
}
let reloc_word = lib.image.get_ref::<Elf32_Word>(rel.offset())
.ok_or("relocation offset cannot be read")?;
lib.image.write(rel.offset(), (reloc_word & 0x80000000) | (value & 0x7FFFFFFF))
},
_ => lib.image.write(rel.offset(), value),
}
}
pub fn rebind(arch: Arch, lib: &Library, name: &[u8], value: Elf32_Word) -> Result<(), Error> {
pub fn rebind(
arch: Arch, lib: &Library, name: &[u8], value: Elf32_Word
) -> Result<(), Error> {
fn rebind_symbol_to_value<R: Relocatable>(
arch: Arch,
lib: &Library,
name: &[u8],
value: Elf32_Word,
relocs: &[R],
arch: Arch, lib: &Library,name: &[u8], value: Elf32_Word, relocs: &[R]
) -> Result<(), Error> {
for reloc in relocs {
let rel_type = RelType::new(arch, reloc.type_info()).ok_or("unsupported relocation type")?;
let rel_type = RelType::new(arch, reloc.type_info())
.ok_or("unsupported relocation type")?;
match rel_type {
RelType::LookupAbs => {
let sym = lib
.symtab()
.get(reloc.sym_info() as usize)
let sym = lib.symtab().get(reloc.sym_info() as usize)
.ok_or("symbol out of bounds of symbol table")?;
let sym_name = lib.name_starting_at(sym.st_name as usize)?;

9
src/libio/cursor.rs
View File

@ -1,9 +1,9 @@
use core_io::{Error as IoError, Read, Write};
use core_io::{Read, Write, Error as IoError};
#[derive(Debug, Clone)]
pub struct Cursor<T> {
inner: T,
pos: usize,
pos: usize
}
impl<T> Cursor<T> {
@ -39,6 +39,7 @@ impl<T> Cursor<T> {
}
impl<T: AsRef<[u8]>> Read for Cursor<T> {
fn read(&mut self, buf: &mut [u8]) -> Result<usize, IoError> {
let data = &self.inner.as_ref()[self.pos..];
let len = buf.len().min(data.len());
@ -49,9 +50,10 @@ impl<T: AsRef<[u8]>> Read for Cursor<T> {
}
impl Write for Cursor<&mut [u8]> {
fn write(&mut self, buf: &[u8]) -> Result<usize, IoError> {
let data = &mut self.inner[self.pos..];
let len = buf.len().min(data.len());
let len = buf.len().min(data.len());
data[..len].copy_from_slice(&buf[..len]);
self.pos += len;
Ok(len)
@ -65,6 +67,7 @@ impl Write for Cursor<&mut [u8]> {
#[cfg(feature = "alloc")]
impl Write for Cursor<::alloc::Vec<u8>> {
#[inline]
fn write(&mut self, buf: &[u8]) -> Result<usize, IoError> {
self.inner.extend_from_slice(buf);

4
src/libio/lib.rs
View File

@ -16,7 +16,7 @@ pub mod cursor;
pub mod proto;
pub use cursor::Cursor;
#[cfg(all(feature = "byteorder", feature = "alloc"))]
pub use proto::ReadStringError;
#[cfg(feature = "byteorder")]
pub use proto::{ProtoRead, ProtoWrite};
#[cfg(all(feature = "byteorder", feature = "alloc"))]
pub use proto::ReadStringError;

17
src/libio/proto.rs
View File

@ -1,14 +1,15 @@
use alloc::{string::String, vec};
use core::str::Utf8Error;
use byteorder::{ByteOrder, NativeEndian};
use core_io::{Error as IoError, Read, Write};
use alloc::vec;
use alloc::string::String;
use core_io::{Read, Write, Error as IoError};
#[allow(dead_code)]
#[derive(Debug, Clone, PartialEq)]
pub enum ReadStringError<T> {
Utf8(Utf8Error),
Other(T),
Other(T)
}
pub trait ProtoRead {
@ -140,9 +141,7 @@ pub trait ProtoWrite {
}
}
impl<T> ProtoRead for T
where T: Read + ?Sized
{
impl<T> ProtoRead for T where T: Read + ?Sized {
type ReadError = IoError;
fn read_exact(&mut self, buf: &mut [u8]) -> Result<(), Self::ReadError> {
@ -150,9 +149,7 @@ where T: Read + ?Sized
}
}
impl<T> ProtoWrite for T
where T: Write + ?Sized
{
impl<T> ProtoWrite for T where T: Write + ?Sized {
type WriteError = IoError;
fn write_all(&mut self, buf: &[u8]) -> Result<(), Self::WriteError> {

18
src/libunwind/backtrace.rs
View File

@ -1,25 +1,27 @@
use libc::{c_int, c_void};
use libc::{c_void, c_int};
use crate::libunwind as uw;
const UW_REG_SP: c_int = 13;
pub fn backtrace<F>(f: F) -> Result<(), uw::_Unwind_Reason_Code>
where F: FnMut(usize) -> () {
where F: FnMut(usize) -> ()
{
struct TraceContext<F> {
step_fn: F,
prev_sp: uw::_Unwind_Word,
prev_sp: uw::_Unwind_Word
}
extern "C" fn trace<F>(context: *mut uw::_Unwind_Context, arg: *mut c_void) -> uw::_Unwind_Reason_Code
where F: FnMut(usize) -> () {
extern fn trace<F>(context: *mut uw::_Unwind_Context, arg: *mut c_void)
-> uw::_Unwind_Reason_Code
where F: FnMut(usize) -> ()
{
unsafe {
let trace_context = &mut *(arg as *mut TraceContext<F>);
// Detect the root of a libfringe thread
let cur_sp = uw::_Unwind_GetGR(context, UW_REG_SP);
if cur_sp == trace_context.prev_sp {
return uw::_URC_END_OF_STACK;
return uw::_URC_END_OF_STACK
} else {
trace_context.prev_sp = cur_sp;
}
@ -33,7 +35,7 @@ where F: FnMut(usize) -> () {
let mut trace_context = TraceContext { step_fn: f, prev_sp: 0 };
match uw::_Unwind_Backtrace(trace::<F>, &mut trace_context as *mut _ as *mut c_void) {
uw::_URC_NO_REASON => Ok(()),
err => Err(err),
err => Err(err)
}
}
}

9
src/libunwind/build.rs
View File

@ -5,7 +5,8 @@ fn main() {
}
mod llvm_libunwind {
use std::{env, path::Path};
use std::path::Path;
use std::env;
fn setup_options(cfg: &mut cc::Build) {
cfg.no_default_flags(true);
@ -81,7 +82,11 @@ mod llvm_libunwind {
cfg.flag("-fvisibility=hidden");
cfg.flag_if_supported("-fvisibility-global-new-delete-hidden");
let unwind_sources = vec!["Unwind-EHABI.cpp", "Unwind-seh.cpp", "libunwind.cpp"];
let unwind_sources = vec![
"Unwind-EHABI.cpp",
"Unwind-seh.cpp",
"libunwind.cpp"
];
let root = Path::new("../llvm_libunwind");
cfg.include(root.join("include"));

6
src/libunwind/libunwind.rs
View File

@ -21,7 +21,8 @@ pub use _Unwind_Reason_Code::*;
pub type _Unwind_Exception_Class = u64;
pub type _Unwind_Word = uintptr_t;
pub type _Unwind_Ptr = uintptr_t;
pub type _Unwind_Trace_Fn = extern "C" fn(ctx: *mut _Unwind_Context, arg: *mut c_void) -> _Unwind_Reason_Code;
pub type _Unwind_Trace_Fn =
extern "C" fn(ctx: *mut _Unwind_Context, arg: *mut c_void) -> _Unwind_Reason_Code;
#[cfg(target_arch = "x86")]
pub const unwinder_private_data_size: usize = 5;
@ -278,6 +279,7 @@ if #[cfg(all(windows, target_arch = "x86_64", target_env = "gnu"))] {
} // cfg_if!
#[no_mangle]
extern "C" fn abort() {
extern fn abort() {
panic!("Abort!");
}

125
src/runtime/src/analyzer.rs
View File

@ -1,15 +1,10 @@
use alloc::rc::Rc;
#[cfg(has_drtio)]
use alloc::vec::Vec;
use core::cell::RefCell;
use libasync::{smoltcp::TcpStream, task};
use libboard_artiq::drtio_routing;
use libboard_zynq::{smoltcp::Error, timer::GlobalTimer};
use libcortex_a9::{cache, mutex::Mutex};
use libboard_zynq::smoltcp::Error;
use libcortex_a9::cache;
use log::{debug, info, warn};
use crate::{pl, proto_async::*};
use crate::proto_async::*;
use crate::pl;
const BUFFER_SIZE: usize = 512 * 1024;
@ -18,7 +13,9 @@ struct Buffer {
data: [u8; BUFFER_SIZE],
}
static mut BUFFER: Buffer = Buffer { data: [0; BUFFER_SIZE] };
static mut BUFFER: Buffer = Buffer {
data: [0; BUFFER_SIZE]
};
fn arm() {
debug!("arming RTIO analyzer");
@ -43,57 +40,13 @@ fn disarm() {
debug!("RTIO analyzer disarmed");
}
#[cfg(has_drtio)]
pub mod remote_analyzer {
use super::*;
use crate::rtio_mgt::drtio;
pub struct RemoteBuffer {
pub total_byte_count: u64,
pub sent_bytes: u32,
pub error: bool,
pub data: Vec<u8>,
}
pub async fn get_data(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer,
) -> Result<RemoteBuffer, &'static str> {
// gets data from satellites and returns consolidated data
let mut remote_data: Vec<u8> = Vec::new();
let mut remote_error = false;
let mut remote_sent_bytes = 0;
let mut remote_total_bytes = 0;
let data_vec = match drtio::analyzer_query(aux_mutex, routing_table, up_destinations, timer).await {
Ok(data_vec) => data_vec,
Err(e) => return Err(e),
};
for data in data_vec {
remote_total_bytes += data.total_byte_count;
remote_sent_bytes += data.sent_bytes;
remote_error |= data.error;
remote_data.extend(data.data);
}
Ok(RemoteBuffer {
total_byte_count: remote_total_bytes,
sent_bytes: remote_sent_bytes,
error: remote_error,
data: remote_data,
})
}
}
#[derive(Debug)]
struct Header {
sent_bytes: u32,
total_byte_count: u64,
error_occurred: bool,
log_channel: u8,
dds_onehot_sel: bool,
dds_onehot_sel: bool
}
async fn write_header(stream: &mut TcpStream, header: &Header) -> Result<(), Error> {
@ -106,13 +59,7 @@ async fn write_header(stream: &mut TcpStream, header: &Header) -> Result<(), Err
Ok(())
}
async fn handle_connection(
stream: &mut TcpStream,
_aux_mutex: &Rc<Mutex<bool>>,
_routing_table: &drtio_routing::RoutingTable,
_up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
_timer: GlobalTimer,
) -> Result<(), Error> {
async fn handle_connection(stream: &mut TcpStream) -> Result<(), Error> {
info!("received connection");
let data = unsafe { &BUFFER.data[..] };
@ -121,11 +68,6 @@ async fn handle_connection(
let total_byte_count = unsafe { pl::csr::rtio_analyzer::dma_byte_count_read() as u64 };
let pointer = (total_byte_count % BUFFER_SIZE as u64) as usize;
let wraparound = total_byte_count >= BUFFER_SIZE as u64;
let sent_bytes = if wraparound {
BUFFER_SIZE as u32
} else {
total_byte_count as u32
};
if overflow_occurred {
warn!("overflow occured");
@ -134,42 +76,12 @@ async fn handle_connection(
warn!("bus error occured");
}
#[cfg(has_drtio)]
let remote = remote_analyzer::get_data(_aux_mutex, _routing_table, _up_destinations, _timer).await;
#[cfg(has_drtio)]
let (header, remote_data) = match remote {
Ok(remote) => (
Header {
total_byte_count: total_byte_count + remote.total_byte_count,
sent_bytes: sent_bytes + remote.sent_bytes,
error_occurred: overflow_occurred | bus_error_occurred | remote.error,
log_channel: pl::csr::CONFIG_RTIO_LOG_CHANNEL as u8,
dds_onehot_sel: true,
},
remote.data,
),
Err(e) => {
warn!("Error getting remote analyzer data: {}", e);
(
Header {
total_byte_count: total_byte_count,
sent_bytes: sent_bytes,
error_occurred: true,
log_channel: pl::csr::CONFIG_RTIO_LOG_CHANNEL as u8,
dds_onehot_sel: true,
},
Vec::new(),
)
}
};
#[cfg(not(has_drtio))]
let header = Header {
total_byte_count: total_byte_count,
sent_bytes: sent_bytes,
sent_bytes: if wraparound { BUFFER_SIZE as u32 } else { total_byte_count as u32 },
error_occurred: overflow_occurred | bus_error_occurred,
log_channel: pl::csr::CONFIG_RTIO_LOG_CHANNEL as u8,
dds_onehot_sel: true, // kept for backward compatibility of analyzer dumps
dds_onehot_sel: true // kept for backward compatibility of analyzer dumps
};
debug!("{:?}", header);
@ -180,28 +92,17 @@ async fn handle_connection(
} else {
stream.send(data[..pointer].iter().copied()).await?;
}
#[cfg(has_drtio)]
stream.send(remote_data.iter().copied()).await?;
Ok(())
}
pub fn start(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &Rc<RefCell<drtio_routing::RoutingTable>>,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer,
) {
let aux_mutex = aux_mutex.clone();
let routing_table = routing_table.clone();
let up_destinations = up_destinations.clone();
pub fn start() {
task::spawn(async move {
loop {
arm();
let mut stream = TcpStream::accept(1382, 2048, 2048).await.unwrap();
disarm();
let routing_table = routing_table.borrow();
let _ = handle_connection(&mut stream, &aux_mutex, &routing_table, &up_destinations, timer)
let _ = handle_connection(&mut stream)
.await
.map_err(|e| warn!("connection terminated: {:?}", e));
let _ = stream.flush().await;

390
src/runtime/src/comms.rs
View File

@ -1,33 +1,37 @@
use alloc::{collections::BTreeMap, rc::Rc, string::String, vec, vec::Vec};
use core::{cell::RefCell, fmt, slice, str};
use core::fmt;
use core::cell::RefCell;
use alloc::{vec, vec::Vec, string::String, collections::BTreeMap, rc::Rc};
use log::{info, warn, error};
use cslice::CSlice;
use futures::{future::FutureExt, select_biased};
use libasync::{smoltcp::{Sockets, TcpStream},
task};
use libboard_artiq::drtio_routing;
#[cfg(feature = "target_kasli_soc")]
use libboard_zynq::error_led::ErrorLED;
use libboard_zynq::{self as zynq,
smoltcp::{self,
iface::{EthernetInterfaceBuilder, NeighborCache},
time::Instant,
wire::IpCidr},
timer::GlobalTimer};
use libconfig::{net_settings, Config};
use libcortex_a9::{mutex::Mutex,
semaphore::Semaphore,
sync_channel::{Receiver, Sender}};
use log::{error, info, warn};
use num_derive::{FromPrimitive, ToPrimitive};
use num_traits::{FromPrimitive, ToPrimitive};
use libboard_zynq::{
self as zynq,
smoltcp::{
self,
wire::IpCidr,
iface::{NeighborCache, EthernetInterfaceBuilder},
time::Instant,
},
timer::GlobalTimer,
};
use libcortex_a9::{semaphore::Semaphore, mutex::Mutex, sync_channel::{Sender, Receiver}};
use futures::{select_biased, future::FutureExt};
use libasync::{smoltcp::{Sockets, TcpStream}, task};
use libconfig::{Config, net_settings};
use libboard_artiq::drtio_routing;
use crate::proto_async::*;
use crate::kernel;
use crate::rpc;
use crate::moninj;
use crate::mgmt;
use crate::analyzer;
use crate::rtio_mgt;
#[cfg(has_drtio)]
use crate::pl;
use crate::{analyzer, kernel, mgmt, moninj,
proto_async::*,
rpc, rtio_dma,
rtio_mgt::{self, resolve_channel_name}};
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Error {
@ -43,9 +47,9 @@ impl fmt::Display for Error {
fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
match self {
Error::NetworkError(error) => write!(f, "network error: {}", error),
Error::UnexpectedPattern => write!(f, "unexpected pattern"),
Error::UnrecognizedPacket => write!(f, "unrecognized packet"),
Error::BufferExhausted => write!(f, "buffer exhausted"),
Error::UnexpectedPattern => write!(f, "unexpected pattern"),
Error::UnrecognizedPacket => write!(f, "unrecognized packet"),
Error::BufferExhausted => write!(f, "buffer exhausted"),
}
}
}
@ -79,18 +83,18 @@ enum Reply {
}
static CACHE_STORE: Mutex<BTreeMap<String, Vec<i32>>> = Mutex::new(BTreeMap::new());
static DMA_RECORD_STORE: Mutex<BTreeMap<String, (Vec<u8>, i64)>> = Mutex::new(BTreeMap::new());
async fn write_header(stream: &TcpStream, reply: Reply) -> Result<()> {
stream
.send_slice(&[0x5a, 0x5a, 0x5a, 0x5a, reply.to_u8().unwrap()])
.await?;
stream.send_slice(&[0x5a, 0x5a, 0x5a, 0x5a, reply.to_u8().unwrap()]).await?;
Ok(())
}
async fn read_request(stream: &TcpStream, allow_close: bool) -> Result<Option<Request>> {
match expect(stream, &[0x5a, 0x5a, 0x5a, 0x5a]).await {
Ok(true) => {}
Ok(false) => return Err(Error::UnexpectedPattern),
Ok(false) =>
return Err(Error::UnexpectedPattern),
Err(smoltcp::Error::Finished) => {
if allow_close {
info!("peer closed connection");
@ -99,12 +103,11 @@ async fn read_request(stream: &TcpStream, allow_close: bool) -> Result<Option<Re
error!("peer unexpectedly closed connection");
return Err(smoltcp::Error::Finished)?;
}
}
Err(e) => return Err(e)?,
},
Err(e) =>
return Err(e)?,
}
Ok(Some(
FromPrimitive::from_i8(read_i8(&stream).await?).ok_or(Error::UnrecognizedPacket)?,
))
Ok(Some(FromPrimitive::from_i8(read_i8(&stream).await?).ok_or(Error::UnrecognizedPacket)?))
}
async fn read_bytes(stream: &TcpStream, max_length: usize) -> Result<Vec<u8>> {
@ -123,7 +126,9 @@ async fn fast_send(sender: &mut Sender<'_, kernel::Message>, content: kernel::Me
let mut content = content;
for _ in 0..RETRY_LIMIT {
match sender.try_send(content) {
Ok(()) => return,
Ok(()) => {
return
},
Err(v) => {
content = v;
}
@ -135,8 +140,10 @@ async fn fast_send(sender: &mut Sender<'_, kernel::Message>, content: kernel::Me
async fn fast_recv(receiver: &mut Receiver<'_, kernel::Message>) -> kernel::Message {
for _ in 0..RETRY_LIMIT {
match receiver.try_recv() {
Ok(v) => return v,
Err(()) => (),
Ok(v) => {
return v;
},
Err(()) => ()
}
}
receiver.async_recv().await
@ -152,14 +159,7 @@ async fn write_exception_string(stream: &TcpStream, s: CSlice<'static, u8>) -> R
Ok(())
}
async fn handle_run_kernel(
stream: Option<&TcpStream>,
control: &Rc<RefCell<kernel::Control>>,
_up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
timer: GlobalTimer,
) -> Result<()> {
async fn handle_run_kernel(stream: Option<&TcpStream>, control: &Rc<RefCell<kernel::Control>>, _up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>) -> Result<()> {
control.borrow_mut().tx.async_send(kernel::Message::StartRequest).await;
loop {
let reply = control.borrow_mut().rx.async_recv().await;
@ -167,7 +167,7 @@ async fn handle_run_kernel(
kernel::Message::RpcSend { is_async, data } => {
if stream.is_none() {
error!("Unexpected RPC from startup/idle kernel!");
break;
break
}
let stream = stream.unwrap();
write_header(stream, Reply::RPCRequest).await?;
@ -194,64 +194,46 @@ async fn handle_run_kernel(
fast_send(&mut control.tx, kernel::Message::RpcRecvReply(Ok(size))).await;
match fast_recv(&mut control.rx).await {
kernel::Message::RpcRecvRequest(slot) => slot,
other => {
panic!("expected nested value slot from kernel CPU, not {:?}", other)
}
other => panic!("expected nested value slot from kernel CPU, not {:?}", other),
}
}
}
})
.await?;
control
.borrow_mut()
.tx
.async_send(kernel::Message::RpcRecvReply(Ok(0)))
.await;
}
}).await?;
control.borrow_mut().tx.async_send(kernel::Message::RpcRecvReply(Ok(0))).await;
},
Request::RPCException => {
let mut control = control.borrow_mut();
match control.rx.async_recv().await {
kernel::Message::RpcRecvRequest(_) => (),
other => panic!("expected (ignored) root value slot from kernel CPU, not {:?}", other),
}
let id = read_i32(stream).await? as u32;
let message = read_i32(stream).await? as u32;
let param = [
read_i64(stream).await?,
read_i64(stream).await?,
read_i64(stream).await?,
];
let file = read_i32(stream).await? as u32;
let line = read_i32(stream).await?;
let column = read_i32(stream).await?;
let id = read_i32(stream).await? as u32;
let message = read_i32(stream).await? as u32;
let param = [read_i64(stream).await?,
read_i64(stream).await?,
read_i64(stream).await?];
let file = read_i32(stream).await? as u32;
let line = read_i32(stream).await?;
let column = read_i32(stream).await?;
let function = read_i32(stream).await? as u32;
control
.tx
.async_send(kernel::Message::RpcRecvReply(Err(kernel::RPCException {
id,
message,
param,
file,
line,
column,
function,
})))
.await;
}
control.tx.async_send(kernel::Message::RpcRecvReply(Err(kernel::RPCException {
id, message, param, file, line, column, function
}))).await;
},
_ => {
error!("unexpected RPC request from host: {:?}", host_request);
return Err(Error::UnrecognizedPacket);
return Err(Error::UnrecognizedPacket)
}
}
}
}
},
kernel::Message::KernelFinished(async_errors) => {
if let Some(stream) = stream {
write_header(stream, Reply::KernelFinished).await?;
write_i8(stream, async_errors as i8).await?;
}
break;
}
},
kernel::Message::KernelException(exceptions, stack_pointers, backtrace, async_errors) => {
match stream {
Some(stream) => {
@ -262,26 +244,7 @@ async fn handle_run_kernel(
for exception in exceptions.iter() {
let exception = exception.as_ref().unwrap();
write_i32(stream, exception.id as i32).await?;
if exception.message.len() == usize::MAX {
// exception with host string
write_exception_string(stream, exception.message).await?;
} else {
let msg = str::from_utf8(unsafe {
slice::from_raw_parts(exception.message.as_ptr(), exception.message.len())
})
.unwrap()
.replace(
"{rtio_channel_info:0}",
&format!(
"0x{:04x}:{}",
exception.param[0],
resolve_channel_name(exception.param[0] as u32)
),
);
write_exception_string(stream, unsafe { CSlice::new(msg.as_ptr(), msg.len()) }).await?;
}
write_exception_string(stream, exception.message).await?;
write_i64(stream, exception.param[0] as i64).await?;
write_i64(stream, exception.param[1] as i64).await?;
write_i64(stream, exception.param[2] as i64).await?;
@ -301,7 +264,7 @@ async fn handle_run_kernel(
write_i32(stream, sp as i32).await?;
}
write_i8(stream, async_errors as i8).await?;
}
},
None => {
error!("Uncaught kernel exceptions: {:?}", exceptions);
}
@ -310,68 +273,27 @@ async fn handle_run_kernel(
}
kernel::Message::CachePutRequest(key, value) => {
CACHE_STORE.lock().insert(key, value);
}
},
kernel::Message::CacheGetRequest(key) => {
const DEFAULT: Vec<i32> = Vec::new();
let value = CACHE_STORE.lock().get(&key).unwrap_or(&DEFAULT).clone();
control
.borrow_mut()
.tx
.async_send(kernel::Message::CacheGetReply(value))
.await;
}
control.borrow_mut().tx.async_send(kernel::Message::CacheGetReply(value)).await;
},
kernel::Message::DmaPutRequest(recorder) => {
let _id = rtio_dma::put_record(aux_mutex, routing_table, timer, recorder).await;
#[cfg(has_drtio)]
rtio_dma::remote_dma::upload_traces(aux_mutex, routing_table, timer, _id).await;
}
DMA_RECORD_STORE.lock().insert(recorder.name, (recorder.buffer, recorder.duration));
},
kernel::Message::DmaEraseRequest(name) => {
// prevent possible OOM when we have large DMA record replacement.
rtio_dma::erase(name, aux_mutex, routing_table, timer).await;
}
DMA_RECORD_STORE.lock().remove(&name);
},
kernel::Message::DmaGetRequest(name) => {
let result = rtio_dma::retrieve(name).await;
control
.borrow_mut()
.tx
.async_send(kernel::Message::DmaGetReply(result))
.await;
}
#[cfg(has_drtio)]
kernel::Message::DmaStartRemoteRequest { id, timestamp } => {
rtio_dma::remote_dma::playback(aux_mutex, routing_table, timer, id as u32, timestamp as u64).await;
}
#[cfg(has_drtio)]
kernel::Message::DmaAwaitRemoteRequest(id) => {
let result = rtio_dma::remote_dma::await_done(id as u32, Some(10_000), timer).await;
let reply = match result {
Ok(rtio_dma::remote_dma::RemoteState::PlaybackEnded {
error,
channel,
timestamp,
}) => kernel::Message::DmaAwaitRemoteReply {
timeout: false,
error: error,
channel: channel,
timestamp: timestamp,
},
_ => kernel::Message::DmaAwaitRemoteReply {
timeout: true,
error: 0,
channel: 0,
timestamp: 0,
},
};
control.borrow_mut().tx.async_send(reply).await;
}
let result = DMA_RECORD_STORE.lock().get(&name).map(|v| v.clone());
control.borrow_mut().tx.async_send(kernel::Message::DmaGetReply(result)).await;
},
#[cfg(has_drtio)]
kernel::Message::UpDestinationsRequest(destination) => {
let result = _up_destinations.borrow()[destination as usize];
control
.borrow_mut()
.tx
.async_send(kernel::Message::UpDestinationsReply(result))
.await;
control.borrow_mut().tx.async_send(kernel::Message::UpDestinationsReply(result)).await;
}
_ => {
panic!("unexpected message from core1 while kernel was running: {:?}", reply);
@ -381,17 +303,11 @@ async fn handle_run_kernel(
Ok(())
}
async fn load_kernel(
buffer: &Vec<u8>,
control: &Rc<RefCell<kernel::Control>>,
stream: Option<&TcpStream>,
) -> Result<()> {
async fn load_kernel(buffer: &Vec<u8>, control: &Rc<RefCell<kernel::Control>>, stream: Option<&TcpStream>) -> Result<()> {
let mut control = control.borrow_mut();
control.restart();
control
.tx
.async_send(kernel::Message::LoadRequest(buffer.to_vec()))
.await;
control.tx.async_send(kernel::Message::LoadRequest(buffer.to_vec())).await;
let reply = control.rx.async_recv().await;
match reply {
kernel::Message::LoadCompleted => {
@ -399,7 +315,7 @@ async fn load_kernel(
write_header(stream, Reply::LoadCompleted).await?;
}
Ok(())
}
},
kernel::Message::LoadFailed => {
if let Some(stream) = stream {
write_header(stream, Reply::LoadFailed).await?;
@ -408,7 +324,7 @@ async fn load_kernel(
error!("Kernel load failed");
}
Err(Error::UnexpectedPattern)
}
},
_ => {
error!("unexpected message from core1: {:?}", reply);
if let Some(stream) = stream {
@ -420,14 +336,7 @@ async fn load_kernel(
}
}
async fn handle_connection(
stream: &mut TcpStream,
control: Rc<RefCell<kernel::Control>>,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
timer: GlobalTimer,
) -> Result<()> {
async fn handle_connection(stream: &mut TcpStream, control: Rc<RefCell<kernel::Control>>, up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>) -> Result<()> {
stream.set_ack_delay(None);
if !expect(stream, b"ARTIQ coredev\n").await? {
@ -444,25 +353,17 @@ async fn handle_connection(
Request::SystemInfo => {
write_header(stream, Reply::SystemInfo).await?;
stream.send_slice("ARZQ".as_bytes()).await?;
}
},
Request::LoadKernel => {
let buffer = read_bytes(stream, 1024 * 1024).await?;
let buffer = read_bytes(stream, 1024*1024).await?;
load_kernel(&buffer, &control, Some(stream)).await?;
}
},
Request::RunKernel => {
handle_run_kernel(
Some(stream),
&control,
&up_destinations,
aux_mutex,
routing_table,
timer,
)
.await?;
}
handle_run_kernel(Some(stream), &control, &up_destinations).await?;
},
_ => {
error!("unexpected request from host: {:?}", request);
return Err(Error::UnrecognizedPacket);
return Err(Error::UnrecognizedPacket)
}
}
}
@ -486,24 +387,24 @@ pub fn main(timer: GlobalTimer, cfg: Config) {
let ip_addrs = [
IpCidr::new(net_addresses.ipv4_addr, 0),
IpCidr::new(net_addresses.ipv6_ll_addr, 0),
IpCidr::new(addr, 0),
IpCidr::new(addr, 0)
];
EthernetInterfaceBuilder::new(&mut eth)
.ethernet_addr(net_addresses.hardware_addr)
.ip_addrs(ip_addrs)
.neighbor_cache(neighbor_cache)
.finalize()
.ethernet_addr(net_addresses.hardware_addr)
.ip_addrs(ip_addrs)
.neighbor_cache(neighbor_cache)
.finalize()
}
None => {
let ip_addrs = [
IpCidr::new(net_addresses.ipv4_addr, 0),
IpCidr::new(net_addresses.ipv6_ll_addr, 0),
IpCidr::new(net_addresses.ipv6_ll_addr, 0)
];
EthernetInterfaceBuilder::new(&mut eth)
.ethernet_addr(net_addresses.hardware_addr)
.ip_addrs(ip_addrs)
.neighbor_cache(neighbor_cache)
.finalize()
.ethernet_addr(net_addresses.hardware_addr)
.ip_addrs(ip_addrs)
.neighbor_cache(neighbor_cache)
.finalize()
}
};
@ -512,20 +413,18 @@ pub fn main(timer: GlobalTimer, cfg: Config) {
// before, mutex was on io, but now that io isn't used...?
let aux_mutex: Rc<Mutex<bool>> = Rc::new(Mutex::new(false));
#[cfg(has_drtio)]
let drtio_routing_table = Rc::new(RefCell::new(drtio_routing::config_routing_table(
pl::csr::DRTIO.len(),
&cfg,
)));
let drtio_routing_table = Rc::new(RefCell::new(
drtio_routing::config_routing_table(pl::csr::DRTIO.len(), &cfg)));
#[cfg(not(has_drtio))]
let drtio_routing_table = Rc::new(RefCell::new(drtio_routing::RoutingTable::default_empty()));
let up_destinations = Rc::new(RefCell::new([false; drtio_routing::DEST_COUNT]));
#[cfg(has_drtio_routing)]
drtio_routing::interconnect_disable_all();
rtio_mgt::startup(&aux_mutex, &drtio_routing_table, &up_destinations, timer, &cfg);
rtio_mgt::startup(&aux_mutex, &drtio_routing_table, &up_destinations, timer);
analyzer::start(&aux_mutex, &drtio_routing_table, &up_destinations, timer);
moninj::start(timer, &aux_mutex, &drtio_routing_table);
analyzer::start();
moninj::start(timer, aux_mutex, drtio_routing_table);
let control: Rc<RefCell<kernel::Control>> = Rc::new(RefCell::new(kernel::Control::start()));
let idle_kernel = Rc::new(cfg.read("idle_kernel").ok());
@ -533,15 +432,7 @@ pub fn main(timer: GlobalTimer, cfg: Config) {
info!("Loading startup kernel...");
if let Ok(()) = task::block_on(load_kernel(&buffer, &control, None)) {
info!("Starting startup kernel...");
let routing_table = drtio_routing_table.borrow();
let _ = task::block_on(handle_run_kernel(
None,
&control,
&up_destinations,
&aux_mutex,
&routing_table,
timer,
));
let _ = task::block_on(handle_run_kernel(None, &control, &up_destinations));
info!("Startup kernel finished!");
} else {
error!("Error loading startup kernel!");
@ -567,16 +458,13 @@ pub fn main(timer: GlobalTimer, cfg: Config) {
let connection = connection.clone();
let terminate = terminate.clone();
let up_destinations = up_destinations.clone();
let aux_mutex = aux_mutex.clone();
let routing_table = drtio_routing_table.clone();
// we make sure the value of terminate is 0 before we start
let _ = terminate.try_wait();
task::spawn(async move {
let routing_table = routing_table.borrow();
select_biased! {
_ = (async {
let _ = handle_connection(&mut stream, control.clone(), &up_destinations, &aux_mutex, &routing_table, timer)
let _ = handle_connection(&mut stream, control.clone(), &up_destinations)
.await
.map_err(|e| warn!("connection terminated: {}", e));
if let Some(buffer) = &*idle_kernel {
@ -584,7 +472,7 @@ pub fn main(timer: GlobalTimer, cfg: Config) {
let _ = load_kernel(&buffer, &control, None)
.await.map_err(|_| warn!("error loading idle kernel"));
info!("Running idle kernel");
let _ = handle_run_kernel(None, &control, &up_destinations, &aux_mutex, &routing_table, timer)
let _ = handle_run_kernel(None, &control, &up_destinations)
.await.map_err(|_| warn!("error running idle kernel"));
info!("Idle kernel terminated");
}
@ -598,59 +486,7 @@ pub fn main(timer: GlobalTimer, cfg: Config) {
}
});
Sockets::run(&mut iface, || Instant::from_millis(timer.get_time().0 as i32));
}
pub fn soft_panic_main(timer: GlobalTimer, cfg: Config) -> ! {
let net_addresses = net_settings::get_addresses(&cfg);
info!("network addresses: {}", net_addresses);
let eth = zynq::eth::Eth::eth0(net_addresses.hardware_addr.0.clone());
const RX_LEN: usize = 64;
// Number of transmission buffers (minimum is two because with
// one, duplicate packet transmission occurs)
const TX_LEN: usize = 64;
let eth = eth.start_rx(RX_LEN);
let mut eth = eth.start_tx(TX_LEN);
let neighbor_cache = NeighborCache::new(alloc::collections::BTreeMap::new());
let mut iface = match net_addresses.ipv6_addr {
Some(addr) => {
let ip_addrs = [
IpCidr::new(net_addresses.ipv4_addr, 0),
IpCidr::new(net_addresses.ipv6_ll_addr, 0),
IpCidr::new(addr, 0),
];
EthernetInterfaceBuilder::new(&mut eth)
.ethernet_addr(net_addresses.hardware_addr)
.ip_addrs(ip_addrs)
.neighbor_cache(neighbor_cache)
.finalize()
}
None => {
let ip_addrs = [
IpCidr::new(net_addresses.ipv4_addr, 0),
IpCidr::new(net_addresses.ipv6_ll_addr, 0),
];
EthernetInterfaceBuilder::new(&mut eth)
.ethernet_addr(net_addresses.hardware_addr)
.ip_addrs(ip_addrs)
.neighbor_cache(neighbor_cache)
.finalize()
}
};
Sockets::init(32);
mgmt::start(cfg);
// getting eth settings disables the LED as it resets GPIO
// need to re-enable it here
#[cfg(feature = "target_kasli_soc")]
{
let mut err_led = ErrorLED::error_led();
err_led.toggle(true);
}
Sockets::run(&mut iface, || Instant::from_millis(timer.get_time().0 as i32));
Sockets::run(&mut iface, || {
Instant::from_millis(timer.get_time().0 as i32)
});
}

225
src/runtime/src/eh_artiq.rs
View File

@ -13,15 +13,15 @@
#![allow(non_camel_case_types)]
use core::mem;
use cslice::CSlice;
use dwarf::eh::{self, EHAction, EHContext};
use libc::{c_int, c_void, uintptr_t};
use log::{error, trace};
use unwind as uw;
use libc::{c_int, c_void, uintptr_t};
use log::{trace, error};
use crate::kernel::KERNEL_IMAGE;
use dwarf::eh::{self, EHAction, EHContext};
const EXCEPTION_CLASS: uw::_Unwind_Exception_Class = 0x4d_4c_42_53_41_52_54_51; /* 'MLBSARTQ' */
#[cfg(target_arch = "arm")]
@ -32,13 +32,13 @@ const UNWIND_DATA_REG: (i32, i32) = (0, 1); // R0, R1
#[repr(C)]
#[derive(Clone, Copy)]
pub struct Exception<'a> {
pub id: u32,
pub file: CSlice<'a, u8>,
pub line: u32,
pub column: u32,
pub id: u32,
pub file: CSlice<'a, u8>,
pub line: u32,
pub column: u32,
pub function: CSlice<'a, u8>,
pub message: CSlice<'a, u8>,
pub param: [i64; 3],
pub message: CSlice<'a, u8>,
pub param: [i64; 3]
}
fn str_err(_: core::str::Utf8Error) -> core::fmt::Error {
@ -55,16 +55,12 @@ fn exception_str<'a>(s: &'a CSlice<'a, u8>) -> Result<&'a str, core::str::Utf8Er
impl<'a> core::fmt::Debug for Exception<'a> {
fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
write!(
f,
"Exception {} from {} in {}:{}:{}, message: {}",
write!(f, "Exception {} from {} in {}:{}:{}, message: {}",
self.id,
exception_str(&self.function).map_err(str_err)?,
exception_str(&self.file).map_err(str_err)?,
self.line,
self.column,
exception_str(&self.message).map_err(str_err)?
)
self.line, self.column,
exception_str(&self.message).map_err(str_err)?)
}
}
@ -95,9 +91,9 @@ struct ExceptionBuffer {
static mut EXCEPTION_BUFFER: ExceptionBuffer = ExceptionBuffer {
uw_exceptions: [uw::_Unwind_Exception {
exception_class: EXCEPTION_CLASS,
exception_class: EXCEPTION_CLASS,
exception_cleanup: cleanup,
private: [0; uw::unwinder_private_data_size],
private: [0; uw::unwinder_private_data_size],
}; MAX_INFLIGHT_EXCEPTIONS],
exceptions: [None; MAX_INFLIGHT_EXCEPTIONS + 1],
exception_stack: [-1; MAX_INFLIGHT_EXCEPTIONS + 1],
@ -106,17 +102,17 @@ static mut EXCEPTION_BUFFER: ExceptionBuffer = ExceptionBuffer {
stack_pointers: [StackPointerBacktrace {
stack_pointer: 0,
initial_backtrace_size: 0,
current_backtrace_size: 0,
current_backtrace_size: 0
}; MAX_INFLIGHT_EXCEPTIONS + 1],
exception_count: 0,
exception_count: 0
};
pub unsafe extern "C" fn reset_exception_buffer() {
pub unsafe extern fn reset_exception_buffer() {
trace!("reset exception buffer");
EXCEPTION_BUFFER.uw_exceptions = [uw::_Unwind_Exception {
exception_class: EXCEPTION_CLASS,
exception_class: EXCEPTION_CLASS,
exception_cleanup: cleanup,
private: [0; uw::unwinder_private_data_size],
private: [0; uw::unwinder_private_data_size],
}; MAX_INFLIGHT_EXCEPTIONS];
EXCEPTION_BUFFER.exceptions = [None; MAX_INFLIGHT_EXCEPTIONS + 1];
EXCEPTION_BUFFER.exception_stack = [-1; MAX_INFLIGHT_EXCEPTIONS + 1];
@ -124,25 +120,26 @@ pub unsafe extern "C" fn reset_exception_buffer() {
EXCEPTION_BUFFER.exception_count = 0;
}
type _Unwind_Stop_Fn = extern "C" fn(
version: c_int,
actions: i32,
exception_class: uw::_Unwind_Exception_Class,
exception_object: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context,
stop_parameter: *mut c_void,
) -> uw::_Unwind_Reason_Code;
type _Unwind_Stop_Fn = extern "C" fn(version: c_int,
actions: i32,
exception_class: uw::_Unwind_Exception_Class,
exception_object: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context,
stop_parameter: *mut c_void)
-> uw::_Unwind_Reason_Code;
extern "C" {
extern {
// not defined in EHABI, but LLVM added it and is useful to us
fn _Unwind_ForcedUnwind(
exception: *mut uw::_Unwind_Exception,
stop_fn: _Unwind_Stop_Fn,
stop_parameter: *mut c_void,
) -> uw::_Unwind_Reason_Code;
fn _Unwind_ForcedUnwind(exception: *mut uw::_Unwind_Exception,
stop_fn: _Unwind_Stop_Fn,
stop_parameter: *mut c_void) -> uw::_Unwind_Reason_Code;
}
unsafe fn find_eh_action(context: *mut uw::_Unwind_Context, foreign_exception: bool, id: u32) -> Result<EHAction, ()> {
unsafe fn find_eh_action(
context: *mut uw::_Unwind_Context,
foreign_exception: bool,
id: u32,
) -> Result<EHAction, ()> {
let lsda = uw::_Unwind_GetLanguageSpecificData(context) as *const u8;
let mut ip_before_instr: c_int = 0;
let ip = uw::_Unwind_GetIPInfo(context, &mut ip_before_instr);
@ -157,11 +154,10 @@ unsafe fn find_eh_action(context: *mut uw::_Unwind_Context, foreign_exception: b
eh::find_eh_action(lsda, &eh_context, foreign_exception, id)
}
pub unsafe fn artiq_personality(
_state: uw::_Unwind_State,
exception_object: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context,
) -> uw::_Unwind_Reason_Code {
pub unsafe fn artiq_personality(_state: uw::_Unwind_State,
exception_object: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context)
-> uw::_Unwind_Reason_Code {
// we will only do phase 2 forced unwinding now
// The DWARF unwinder assumes that _Unwind_Context holds things like the function
// and LSDA pointers, however ARM EHABI places them into the exception object.
@ -169,7 +165,9 @@ pub unsafe fn artiq_personality(
// take only the context pointer, GCC personality routines stash a pointer to
// exception_object in the context, using location reserved for ARM's
// "scratch register" (r12).
uw::_Unwind_SetGR(context, uw::UNWIND_POINTER_REG, exception_object as uw::_Unwind_Ptr);
uw::_Unwind_SetGR(context,
uw::UNWIND_POINTER_REG,
exception_object as uw::_Unwind_Ptr);
// ...A more principled approach would be to provide the full definition of ARM's
// _Unwind_Context in our libunwind bindings and fetch the required data from there
// directly, bypassing DWARF compatibility functions.
@ -188,8 +186,10 @@ pub unsafe fn artiq_personality(
};
match eh_action {
EHAction::None => return continue_unwind(exception_object, context),
EHAction::Cleanup(lpad) | EHAction::Catch(lpad) => {
uw::_Unwind_SetGR(context, UNWIND_DATA_REG.0, exception_object as uintptr_t);
EHAction::Cleanup(lpad) |
EHAction::Catch(lpad) => {
uw::_Unwind_SetGR(context, UNWIND_DATA_REG.0,
exception_object as uintptr_t);
uw::_Unwind_SetGR(context, UNWIND_DATA_REG.1, exception as *const _ as uw::_Unwind_Word);
uw::_Unwind_SetIP(context, lpad);
return uw::_URC_INSTALL_CONTEXT;
@ -199,10 +199,9 @@ pub unsafe fn artiq_personality(
// On ARM EHABI the personality routine is responsible for actually
// unwinding a single stack frame before returning (ARM EHABI Sec. 6.1).
unsafe fn continue_unwind(
exception_object: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context,
) -> uw::_Unwind_Reason_Code {
unsafe fn continue_unwind(exception_object: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context)
-> uw::_Unwind_Reason_Code {
let reason = __gnu_unwind_frame(exception_object, context);
if reason == uw::_URC_NO_REASON {
uw::_URC_CONTINUE_UNWIND
@ -212,14 +211,13 @@ pub unsafe fn artiq_personality(
}
// defined in libgcc
extern "C" {
fn __gnu_unwind_frame(
exception_object: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context,
) -> uw::_Unwind_Reason_Code;
fn __gnu_unwind_frame(exception_object: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context)
-> uw::_Unwind_Reason_Code;
}
}
pub unsafe extern "C" fn raise(exception: *const Exception) -> ! {
pub unsafe extern fn raise(exception: *const Exception) -> ! {
use cslice::AsCSlice;
let count = EXCEPTION_BUFFER.exception_count;
@ -246,11 +244,8 @@ pub unsafe extern "C" fn raise(exception: *const Exception) -> ! {
}
}
assert!(found);
let _result = _Unwind_ForcedUnwind(
&mut EXCEPTION_BUFFER.uw_exceptions[stack[count - 1] as usize],
stop_fn,
core::ptr::null_mut(),
);
let _result = _Unwind_ForcedUnwind(&mut EXCEPTION_BUFFER.uw_exceptions[stack[count - 1] as usize],
stop_fn, core::ptr::null_mut());
} else {
if count < MAX_INFLIGHT_EXCEPTIONS {
trace!("raising exception at level {}", count);
@ -258,33 +253,34 @@ pub unsafe extern "C" fn raise(exception: *const Exception) -> ! {
for (i, slot) in EXCEPTION_BUFFER.exceptions.iter_mut().enumerate() {
// we should always be able to find a slot
if slot.is_none() {
*slot = Some(*mem::transmute::<*const Exception, *const Exception<'static>>(
exception,
));
*slot = Some(
*mem::transmute::<*const Exception, *const Exception<'static>>
(exception));
EXCEPTION_BUFFER.exception_stack[count] = i as isize;
EXCEPTION_BUFFER.uw_exceptions[i].private = [0; uw::unwinder_private_data_size];
EXCEPTION_BUFFER.uw_exceptions[i].private =
[0; uw::unwinder_private_data_size];
EXCEPTION_BUFFER.stack_pointers[i] = StackPointerBacktrace {
stack_pointer: 0,
initial_backtrace_size: EXCEPTION_BUFFER.backtrace_size,
current_backtrace_size: 0,
};
EXCEPTION_BUFFER.exception_count += 1;
let _result =
_Unwind_ForcedUnwind(&mut EXCEPTION_BUFFER.uw_exceptions[i], stop_fn, core::ptr::null_mut());
let _result = _Unwind_ForcedUnwind(&mut EXCEPTION_BUFFER.uw_exceptions[i],
stop_fn, core::ptr::null_mut());
}
}
} else {
error!("too many nested exceptions");
// TODO: better reporting?
let exception = Exception {
id: get_exception_id("RuntimeError"),
file: file!().as_c_slice(),
line: line!(),
column: column!(),
id: get_exception_id("RuntimeError"),
file: file!().as_c_slice(),
line: line!(),
column: column!(),
// https://github.com/rust-lang/rfcs/pull/1719
function: "__artiq_raise".as_c_slice(),
message: "too many nested exceptions".as_c_slice(),
param: [0, 0, 0],
message: "too many nested exceptions".as_c_slice(),
param: [0, 0, 0]
};
EXCEPTION_BUFFER.exceptions[MAX_INFLIGHT_EXCEPTIONS] = Some(mem::transmute(exception));
EXCEPTION_BUFFER.stack_pointers[MAX_INFLIGHT_EXCEPTIONS] = Default::default();
@ -295,20 +291,17 @@ pub unsafe extern "C" fn raise(exception: *const Exception) -> ! {
unreachable!();
}
pub unsafe extern "C" fn resume() -> ! {
pub unsafe extern fn resume() -> ! {
trace!("resume");
assert!(EXCEPTION_BUFFER.exception_count != 0);
let i = EXCEPTION_BUFFER.exception_stack[EXCEPTION_BUFFER.exception_count - 1];
assert!(i != -1);
let _result = _Unwind_ForcedUnwind(
&mut EXCEPTION_BUFFER.uw_exceptions[i as usize],
stop_fn,
core::ptr::null_mut(),
);
let _result = _Unwind_ForcedUnwind(&mut EXCEPTION_BUFFER.uw_exceptions[i as usize],
stop_fn, core::ptr::null_mut());
unreachable!()
}
pub unsafe extern "C" fn end_catch() {
pub unsafe extern fn end_catch() {
let mut count = EXCEPTION_BUFFER.exception_count;
assert!(count != 0);
// we remove all exceptions with SP <= current exception SP
@ -316,7 +309,8 @@ pub unsafe extern "C" fn end_catch() {
let index = EXCEPTION_BUFFER.exception_stack[count - 1] as usize;
EXCEPTION_BUFFER.exception_stack[count - 1] = -1;
EXCEPTION_BUFFER.exceptions[index] = None;
let outer_sp = EXCEPTION_BUFFER.stack_pointers[index].stack_pointer;
let outer_sp = EXCEPTION_BUFFER.stack_pointers
[index].stack_pointer;
count -= 1;
for i in (0..count).rev() {
let index = EXCEPTION_BUFFER.exception_stack[i];
@ -340,7 +334,8 @@ pub unsafe extern "C" fn end_catch() {
};
}
extern "C" fn cleanup(_unwind_code: uw::_Unwind_Reason_Code, _uw_exception: *mut uw::_Unwind_Exception) {
extern fn cleanup(_unwind_code: uw::_Unwind_Reason_Code,
_uw_exception: *mut uw::_Unwind_Exception) {
unimplemented!()
}
@ -350,26 +345,18 @@ fn uncaught_exception() -> ! {
for i in 0..EXCEPTION_BUFFER.exception_count {
if EXCEPTION_BUFFER.exception_stack[i] != i as isize {
// find the correct index
let index = EXCEPTION_BUFFER
.exception_stack
let index = EXCEPTION_BUFFER.exception_stack
.iter()
.position(|v| *v == i as isize)
.unwrap();
.position(|v| *v == i as isize).unwrap();
let a = EXCEPTION_BUFFER.exception_stack[index];
let b = EXCEPTION_BUFFER.exception_stack[i];
assert!(a != -1 && b != -1);
core::mem::swap(
&mut EXCEPTION_BUFFER.exception_stack[index],
&mut EXCEPTION_BUFFER.exception_stack[i],
);
core::mem::swap(
&mut EXCEPTION_BUFFER.exceptions[a as usize],
&mut EXCEPTION_BUFFER.exceptions[b as usize],
);
core::mem::swap(
&mut EXCEPTION_BUFFER.stack_pointers[a as usize],
&mut EXCEPTION_BUFFER.stack_pointers[b as usize],
);
core::mem::swap(&mut EXCEPTION_BUFFER.exception_stack[index],
&mut EXCEPTION_BUFFER.exception_stack[i]);
core::mem::swap(&mut EXCEPTION_BUFFER.exceptions[a as usize],
&mut EXCEPTION_BUFFER.exceptions[b as usize]);
core::mem::swap(&mut EXCEPTION_BUFFER.stack_pointers[a as usize],
&mut EXCEPTION_BUFFER.stack_pointers[b as usize]);
}
}
}
@ -377,20 +364,17 @@ fn uncaught_exception() -> ! {
crate::kernel::core1::terminate(
EXCEPTION_BUFFER.exceptions[..EXCEPTION_BUFFER.exception_count].as_ref(),
EXCEPTION_BUFFER.stack_pointers[..EXCEPTION_BUFFER.exception_count].as_ref(),
EXCEPTION_BUFFER.backtrace[..EXCEPTION_BUFFER.backtrace_size].as_mut(),
)
EXCEPTION_BUFFER.backtrace[..EXCEPTION_BUFFER.backtrace_size].as_mut())
}
}
// stop function which would be executed when we unwind each frame
extern "C" fn stop_fn(
_version: c_int,
actions: i32,
_uw_exception_class: uw::_Unwind_Exception_Class,
_uw_exception: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context,
_stop_parameter: *mut c_void,
) -> uw::_Unwind_Reason_Code {
extern fn stop_fn(_version: c_int,
actions: i32,
_uw_exception_class: uw::_Unwind_Exception_Class,
_uw_exception: *mut uw::_Unwind_Exception,
context: *mut uw::_Unwind_Context,
_stop_parameter: *mut c_void) -> uw::_Unwind_Reason_Code {
unsafe {
let load_addr = KERNEL_IMAGE.as_ref().unwrap().get_load_addr();
let backtrace_size = EXCEPTION_BUFFER.backtrace_size;
@ -439,7 +423,7 @@ static EXCEPTION_ID_LOOKUP: [(&str, u32); 11] = [
pub fn get_exception_id(name: &str) -> u32 {
for (n, id) in EXCEPTION_ID_LOOKUP.iter() {
if *n == name {
return *id;
return *id
}
}
unimplemented!("unallocated internal exception id")
@ -447,24 +431,25 @@ pub fn get_exception_id(name: &str) -> u32 {
#[macro_export]
macro_rules! artiq_raise {
($name:expr, $message:expr, $param0:expr, $param1:expr, $param2:expr) => {{
($name:expr, $message:expr, $param0:expr, $param1:expr, $param2:expr) => ({
use cslice::AsCSlice;
let name_id = $crate::eh_artiq::get_exception_id($name);
let message_cl = $message.clone();
let exn = $crate::eh_artiq::Exception {
id: name_id,
file: file!().as_c_slice(),
line: line!(),
column: column!(),
id: name_id,
file: file!().as_c_slice(),
line: line!(),
column: column!(),
// https://github.com/rust-lang/rfcs/pull/1719
function: "(Rust function)".as_c_slice(),
message: message_cl.as_c_slice(),
param: [$param0, $param1, $param2],
message: $message.as_c_slice(),
param: [$param0, $param1, $param2]
};
#[allow(unused_unsafe)]
unsafe {
$crate::eh_artiq::raise(&exn)
}
}};
($name:expr, $message:expr) => {{ artiq_raise!($name, $message, 0, 0, 0) }};
});
($name:expr, $message:expr) => ({
artiq_raise!($name, $message, 0, 0, 0)
});
}

25
src/runtime/src/i2c.rs
View File

@ -1,10 +1,9 @@
use libboard_zynq;
use crate::artiq_raise;
pub static mut I2C_BUS: Option<libboard_zynq::i2c::I2c> = None;
pub extern "C" fn start(busno: i32) {
pub extern fn start(busno: i32) {
if busno > 0 {
artiq_raise!("I2CError", "I2C bus could not be accessed");
}
@ -15,7 +14,7 @@ pub extern "C" fn start(busno: i32) {
}
}
pub extern "C" fn restart(busno: i32) {
pub extern fn restart(busno: i32) {
if busno > 0 {
artiq_raise!("I2CError", "I2C bus could not be accessed");
}
@ -26,7 +25,7 @@ pub extern "C" fn restart(busno: i32) {
}
}
pub extern "C" fn stop(busno: i32) {
pub extern fn stop(busno: i32) {
if busno > 0 {
artiq_raise!("I2CError", "I2C bus could not be accessed");
}
@ -37,7 +36,7 @@ pub extern "C" fn stop(busno: i32) {
}
}
pub extern "C" fn write(busno: i32, data: i32) -> bool {
pub extern fn write(busno: i32, data: i32) -> bool {
if busno > 0 {
artiq_raise!("I2CError", "I2C bus could not be accessed");
}
@ -49,7 +48,7 @@ pub extern "C" fn write(busno: i32, data: i32) -> bool {
}
}
pub extern "C" fn read(busno: i32, ack: bool) -> i32 {
pub extern fn read(busno: i32, ack: bool) -> i32 {
if busno > 0 {
artiq_raise!("I2CError", "I2C bus could not be accessed");
}
@ -61,12 +60,11 @@ pub extern "C" fn read(busno: i32, ack: bool) -> i32 {
}
}
pub extern "C" fn switch_select(busno: i32, address: i32, mask: i32) {
pub extern fn switch_select(busno: i32, address: i32, mask: i32) {
if busno > 0 {
artiq_raise!("I2CError", "I2C bus could not be accessed");
}
let ch = match mask {
//decode from mainline, PCA9548-centric API
let ch = match mask { //decode from mainline, PCA9548-centric API
0x00 => None,
0x01 => Some(0),
0x02 => Some(1),
@ -76,15 +74,10 @@ pub extern "C" fn switch_select(busno: i32, address: i32, mask: i32) {
0x20 => Some(5),
0x40 => Some(6),
0x80 => Some(7),
_ => artiq_raise!("I2CError", "switch select supports only one channel"),
_ => artiq_raise!("I2CError", "switch select supports only one channel")
};
unsafe {
if (&mut I2C_BUS)
.as_mut()
.unwrap()
.pca954x_select(address as u8, ch)
.is_err()
{
if (&mut I2C_BUS).as_mut().unwrap().pca954x_select(address as u8, ch).is_err() {
artiq_raise!("I2CError", "switch select failed");
}
}

9
src/runtime/src/irq.rs
View File

@ -1,8 +1,11 @@
use core::sync::atomic::{AtomicBool, Ordering};
use libboard_zynq::{gic, mpcore, println, stdio};
use libcortex_a9::{asm, interrupt_handler, notify_spin_lock, regs::MPIDR, spin_lock_yield};
use libcortex_a9::{
asm, interrupt_handler,
regs::MPIDR,
spin_lock_yield, notify_spin_lock
};
use libregister::RegisterR;
use core::sync::atomic::{AtomicBool, Ordering};
extern "C" {
static mut __stack1_start: u32;

88
src/runtime/src/kernel/api.rs
View File

@ -1,25 +1,29 @@
use alloc::vec;
use core::{ffi::VaList, ptr, str};
use core::ffi::VaList;
use core::ptr;
use core::str;
use libc::{c_char, c_int, size_t};
use libm;
use log::{info, warn};
use super::{cache,
core1::rtio_get_destination_status,
dma,
rpc::{rpc_recv, rpc_send, rpc_send_async}};
use crate::{eh_artiq, i2c, rtio};
use alloc::vec;
use crate::eh_artiq;
use crate::rtio;
use crate::i2c;
use super::rpc::{rpc_send, rpc_send_async, rpc_recv};
use super::dma;
use super::cache;
use super::core1::rtio_get_destination_status;
extern "C" {
fn vsnprintf_(buffer: *mut c_char, count: size_t, format: *const c_char, va: VaList) -> c_int;
}
unsafe extern "C" fn core_log(fmt: *const c_char, mut args: ...) {
unsafe extern fn core_log(fmt: *const c_char, mut args: ...) {
let size = vsnprintf_(ptr::null_mut(), 0, fmt, args.as_va_list()) as usize;
let mut buf = vec![0; size + 1];
vsnprintf_(buf.as_mut_ptr() as *mut i8, size + 1, fmt, args.as_va_list());
let buf: &[u8] = &buf.as_slice()[..size - 1]; // strip \n and NUL
let buf: &[u8] = &buf.as_slice()[..size-1]; // strip \n and NUL
match str::from_utf8(buf) {
Ok(s) => info!("kernel: {}", s),
Err(e) => {
@ -29,13 +33,14 @@ unsafe extern "C" fn core_log(fmt: *const c_char, mut args: ...) {
}
}
unsafe extern "C" fn rtio_log(fmt: *const c_char, mut args: ...) {
unsafe extern fn rtio_log(fmt: *const c_char, mut args: ...) {
let size = vsnprintf_(ptr::null_mut(), 0, fmt, args.as_va_list()) as usize;
let mut buf = vec![0; size + 1];
vsnprintf_(buf.as_mut_ptr(), size + 1, fmt, args.as_va_list());
rtio::write_log(buf.as_slice());
}
macro_rules! api {
($i:ident) => ({
extern { static $i: u8; }
@ -51,25 +56,24 @@ macro_rules! api {
}
macro_rules! api_libm_f64f64 {
($i:ident) => {{
extern "C" fn $i(x: f64) -> f64 {
($i:ident) => ({
extern fn $i(x: f64) -> f64 {
libm::$i(x)
}
api!($i = $i)
}};
})
}
macro_rules! api_libm_f64f64f64 {
($i:ident) => {{
extern "C" fn $i(x: f64, y: f64) -> f64 {
($i:ident) => ({
extern fn $i(x: f64, y: f64) -> f64 {
libm::$i(x, y)
}
api!($i = $i)
}};
})
}
pub fn resolve(required: &[u8]) -> Option<u32> {
#[rustfmt::skip]
let api = &[
// timing
api!(now_mu = rtio::now_mu),
@ -120,7 +124,6 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api!(__aeabi_ddiv),
api!(__aeabi_dmul),
api!(__aeabi_dsub),
// Double-precision floating-point comparison helper functions
// RTABI chapter 4.1.2, Table 3
api!(__aeabi_dcmpeq),
@ -130,14 +133,12 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api!(__aeabi_dcmpge),
api!(__aeabi_dcmpgt),
api!(__aeabi_dcmpun),
// Single-precision floating-point arithmetic helper functions
// RTABI chapter 4.1.2, Table 4
api!(__aeabi_fadd),
api!(__aeabi_fdiv),
api!(__aeabi_fmul),
api!(__aeabi_fsub),
// Single-precision floating-point comparison helper functions
// RTABI chapter 4.1.2, Table 5
api!(__aeabi_fcmpeq),
@ -147,7 +148,6 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api!(__aeabi_fcmpge),
api!(__aeabi_fcmpgt),
api!(__aeabi_fcmpun),
// Floating-point to integer conversions.
// RTABI chapter 4.1.2, Table 6
api!(__aeabi_d2iz),
@ -158,11 +158,9 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api!(__aeabi_f2uiz),
api!(__aeabi_f2lz),
api!(__aeabi_f2ulz),
// Conversions between floating types.
// RTABI chapter 4.1.2, Table 7
api!(__aeabi_f2d),
// Integer to floating-point conversions.
// RTABI chapter 4.1.2, Table 8
api!(__aeabi_i2d),
@ -173,14 +171,12 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api!(__aeabi_ui2f),
api!(__aeabi_l2f),
api!(__aeabi_ul2f),
// Long long helper functions
// RTABI chapter 4.2, Table 9
api!(__aeabi_lmul),
api!(__aeabi_llsl),
api!(__aeabi_llsr),
api!(__aeabi_lasr),
// Integer division functions
// RTABI chapter 4.3.1
api!(__aeabi_idiv),
@ -188,7 +184,6 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api!(__aeabi_idivmod),
api!(__aeabi_uidiv),
api!(__aeabi_uldivmod),
// 4.3.4 Memory copying, clearing, and setting
api!(__aeabi_memcpy8),
api!(__aeabi_memcpy4),
@ -204,30 +199,10 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api!(__aeabi_memclr),
// libc
api!(
memcpy,
extern "C" {
fn memcpy(dest: *mut u8, src: *const u8, n: usize) -> *mut u8;
}
),
api!(
memmove,
extern "C" {
fn memmove(dest: *mut u8, src: *const u8, n: usize) -> *mut u8;
}
),
api!(
memset,
extern "C" {
fn memset(s: *mut u8, c: i32, n: usize) -> *mut u8;
}
),
api!(
memcmp,
extern "C" {
fn memcmp(s1: *const u8, s2: *const u8, n: usize) -> i32;
}
),
api!(memcpy, extern { fn memcpy(dest: *mut u8, src: *const u8, n: usize) -> *mut u8; }),
api!(memmove, extern { fn memmove(dest: *mut u8, src: *const u8, n: usize) -> *mut u8; }),
api!(memset, extern { fn memset(s: *mut u8, c: i32, n: usize) -> *mut u8; }),
api!(memcmp, extern { fn memcmp(s1: *const u8, s2: *const u8, n: usize) -> i32; }),
// exceptions
api!(_Unwind_Resume = unwind::_Unwind_Resume),
@ -235,7 +210,6 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api!(__nac3_raise = eh_artiq::raise),
api!(__nac3_resume = eh_artiq::resume),
api!(__nac3_end_catch = eh_artiq::end_catch),
// legacy exception symbols
api!(__artiq_personality = eh_artiq::artiq_personality),
api!(__artiq_raise = eh_artiq::raise),
@ -267,7 +241,7 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api_libm_f64f64!(fabs),
api_libm_f64f64!(floor),
{
extern "C" fn fma(x: f64, y: f64, z: f64) -> f64 {
extern fn fma(x: f64, y: f64, z: f64) -> f64 {
libm::fma(x, y, z)
}
api!(fma = fma)
@ -279,7 +253,7 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api_libm_f64f64!(j0),
api_libm_f64f64!(j1),
{
extern "C" fn jn(n: i32, x: f64) -> f64 {
extern fn jn(n: i32, x: f64) -> f64 {
libm::jn(n, x)
}
api!(jn = jn)
@ -301,13 +275,13 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
api_libm_f64f64!(y0),
api_libm_f64f64!(y1),
{
extern "C" fn yn(n: i32, x: f64) -> f64 {
extern fn yn(n: i32, x: f64) -> f64 {
libm::yn(n, x)
}
api!(yn = yn)
},
];
api.iter()
.find(|&&(exported, _)| exported.as_bytes() == required)
.map(|&(_, ptr)| ptr as u32)
.find(|&&(exported, _)| exported.as_bytes() == required)
.map(|&(_, ptr)| ptr as u32)
}

25
src/runtime/src/kernel/cache.rs
View File

@ -1,17 +1,12 @@
use alloc::{boxed::Box, string::String};
use core::mem::{forget, transmute};
use alloc::{string::String, boxed::Box};
use cslice::{CSlice, AsCSlice};
use core::mem::{transmute, forget};
use super::{KERNEL_CHANNEL_0TO1, KERNEL_CHANNEL_1TO0, Message};
use cslice::{AsCSlice, CSlice};
use super::{Message, KERNEL_CHANNEL_0TO1, KERNEL_CHANNEL_1TO0};
pub extern "C" fn get(key: CSlice<u8>) -> &CSlice<'static, i32> {
pub extern fn get(key: CSlice<u8>) -> &CSlice<'static, i32> {
let key = String::from_utf8(key.as_ref().to_vec()).unwrap();
unsafe {
KERNEL_CHANNEL_1TO0
.as_mut()
.unwrap()
.send(Message::CacheGetRequest(key));
KERNEL_CHANNEL_1TO0.as_mut().unwrap().send(Message::CacheGetRequest(key));
let msg = KERNEL_CHANNEL_0TO1.as_mut().unwrap().recv();
if let Message::CacheGetReply(v) = msg {
let leaked = Box::new(v.as_c_slice());
@ -25,13 +20,11 @@ pub extern "C" fn get(key: CSlice<u8>) -> &CSlice<'static, i32> {
}
}
pub extern "C" fn put(key: CSlice<u8>, list: &CSlice<i32>) {
pub extern fn put(key: CSlice<u8>, list: &CSlice<i32>) {
let key = String::from_utf8(key.as_ref().to_vec()).unwrap();
let value = list.as_ref().to_vec();
unsafe {
KERNEL_CHANNEL_1TO0
.as_mut()
.unwrap()
.send(Message::CachePutRequest(key, value));
KERNEL_CHANNEL_1TO0.as_mut().unwrap().send(Message::CachePutRequest(key, value));
}
}

9
src/runtime/src/kernel/control.rs
View File

@ -1,11 +1,11 @@
use core::mem::{forget, replace};
use libcortex_a9::sync_channel::{Receiver, Sender};
use libcortex_a9::sync_channel::{Sender, Receiver};
use libsupport_zynq::boot::Core1;
use super::{Message, CHANNEL_0TO1, CHANNEL_1TO0, CHANNEL_SEM, INIT_LOCK};
use super::{CHANNEL_0TO1, CHANNEL_1TO0, CHANNEL_SEM, INIT_LOCK, Message};
use crate::irq::restart_core1;
use core::mem::{forget, replace};
pub struct Control {
pub tx: Sender<'static, Message>,
pub rx: Receiver<'static, Message>,
@ -53,3 +53,4 @@ impl Control {
forget(replace(&mut self.rx, core0_rx));
}
}

103
src/runtime/src/kernel/core1.rs
View File

@ -1,20 +1,31 @@
//! Kernel prologue/epilogue that runs on the 2nd CPU core
use core::{mem, ptr, cell::UnsafeCell};
use alloc::borrow::ToOwned;
use core::{cell::UnsafeCell, mem, ptr};
use log::{debug, info, error};
use cslice::CSlice;
use dyld::{self, elf::EXIDX_Entry, Library};
use libboard_zynq::{gic, mpcore};
use libcortex_a9::{asm::{dsb, isb},
cache::{bpiall, dcci_slice, iciallu},
enable_fpu, sync_channel};
use libsupport_zynq::ram;
use log::{debug, error, info};
use super::{api::resolve, dma, rpc::rpc_send_async, Message, CHANNEL_0TO1, CHANNEL_1TO0, CHANNEL_SEM, INIT_LOCK,
KERNEL_CHANNEL_0TO1, KERNEL_CHANNEL_1TO0, KERNEL_IMAGE};
use libcortex_a9::{
enable_fpu,
cache::{dcci_slice, iciallu, bpiall},
asm::{dsb, isb},
sync_channel,
};
use libboard_zynq::{mpcore, gic};
use libsupport_zynq::ram;
use dyld::{self, Library, elf::EXIDX_Entry};
use crate::{eh_artiq, get_async_errors, rtio};
use super::{
api::resolve,
rpc::rpc_send_async,
INIT_LOCK,
CHANNEL_0TO1, CHANNEL_1TO0,
CHANNEL_SEM,
KERNEL_CHANNEL_0TO1, KERNEL_CHANNEL_1TO0,
KERNEL_IMAGE,
Message,
dma,
};
// linker symbols
extern "C" {
@ -27,13 +38,13 @@ extern "C" {
unsafe fn attribute_writeback(typeinfo: *const ()) {
struct Attr {
offset: usize,
tag: CSlice<'static, u8>,
name: CSlice<'static, u8>,
tag: CSlice<'static, u8>,
name: CSlice<'static, u8>
}
struct Type {
attributes: *const *const Attr,
objects: *const *const (),
objects: *const *const ()
}
let mut tys = typeinfo as *const *const Type;
@ -52,16 +63,11 @@ unsafe fn attribute_writeback(typeinfo: *const ()) {
attributes = attributes.offset(1);
if (*attribute).tag.len() > 0 {
rpc_send_async(
0,
&(*attribute).tag,
[
&object as *const _ as *const (),
&(*attribute).name as *const _ as *const (),
(object as usize + (*attribute).offset) as *const (),
]
.as_ptr(),
);
rpc_send_async(0, &(*attribute).tag, [
&object as *const _ as *const (),
&(*attribute).name as *const _ as *const (),
(object as usize + (*attribute).offset) as *const ()
].as_ptr());
}
}
}
@ -76,8 +82,7 @@ pub struct KernelImage {
impl KernelImage {
pub fn new(library: Library) -> Result<Self, dyld::Error> {
let __modinit__ = library
.lookup(b"__modinit__")
let __modinit__ = library.lookup(b"__modinit__")
.ok_or(dyld::Error::Lookup("__modinit__".to_owned()))?;
let typeinfo = library.lookup(b"typeinfo");
@ -85,7 +90,8 @@ impl KernelImage {
let bss_start = library.lookup(b"__bss_start");
let end = library.lookup(b"_end");
if let Some(bss_start) = bss_start {
let end = end.ok_or(dyld::Error::Lookup("_end".to_owned()))?;
let end = end
.ok_or(dyld::Error::Lookup("_end".to_owned()))?;
unsafe {
ptr::write_bytes(bss_start as *mut u8, 0, (end - bss_start) as usize);
}
@ -120,7 +126,9 @@ impl KernelImage {
}
pub fn get_load_addr(&self) -> usize {
unsafe { self.library.get().as_ref().unwrap().image.as_ptr() as usize }
unsafe {
self.library.get().as_ref().unwrap().image.as_ptr() as usize
}
}
}
@ -156,19 +164,20 @@ pub extern "C" fn main_core1() {
let message = core1_rx.recv();
match message {
Message::LoadRequest(data) => {
let result = dyld::load(&data, &resolve).and_then(KernelImage::new);
let result = dyld::load(&data, &resolve)
.and_then(KernelImage::new);
match result {
Ok(kernel) => {
loaded_kernel = Some(kernel);
debug!("kernel loaded");
core1_tx.send(Message::LoadCompleted);
}
},
Err(error) => {
error!("failed to load shared library: {}", error);
core1_tx.send(Message::LoadFailed);
}
}
}
},
Message::StartRequest => {
info!("kernel starting");
if let Some(kernel) = loaded_kernel.take() {
@ -193,11 +202,9 @@ pub extern "C" fn main_core1() {
}
/// Called by eh_artiq
pub fn terminate(
exceptions: &'static [Option<eh_artiq::Exception<'static>>],
stack_pointers: &'static [eh_artiq::StackPointerBacktrace],
backtrace: &'static mut [(usize, usize)],
) -> ! {
pub fn terminate(exceptions: &'static [Option<eh_artiq::Exception<'static>>],
stack_pointers: &'static [eh_artiq::StackPointerBacktrace],
backtrace: &'static mut [(usize, usize)]) -> ! {
{
let core1_tx = unsafe { KERNEL_CHANNEL_1TO0.as_mut().unwrap() };
let errors = unsafe { get_async_errors() };
@ -208,34 +215,26 @@ pub fn terminate(
/// Called by llvm_libunwind
#[no_mangle]
extern "C" fn dl_unwind_find_exidx(pc: *const u32, len_ptr: *mut u32) -> *const u32 {
extern fn dl_unwind_find_exidx(pc: *const u32, len_ptr: *mut u32) -> *const u32 {
let length;
let start: *const EXIDX_Entry;
unsafe {
if &__text_start as *const u32 <= pc && pc < &__text_end as *const u32 {
length = (&__exidx_end as *const EXIDX_Entry).offset_from(&__exidx_start) as u32;
start = &__exidx_start;
} else if KERNEL_IMAGE != ptr::null() {
let exidx = KERNEL_IMAGE
.as_ref()
} else {
let exidx = KERNEL_IMAGE.as_ref()
.expect("dl_unwind_find_exidx kernel image")
.library
.get()
.as_ref()
.unwrap()
.exidx();
.library.get().as_ref().unwrap().exidx();
length = exidx.len() as u32;
start = exidx.as_ptr();
} else {
length = 0;
start = ptr::null();
}
*len_ptr = length;
}
start as *const u32
}
pub extern "C" fn rtio_get_destination_status(destination: i32) -> bool {
pub extern fn rtio_get_destination_status(destination: i32) -> bool {
#[cfg(has_drtio)]
if destination > 0 && destination < 255 {
let reply = unsafe {
@ -246,9 +245,9 @@ pub extern "C" fn rtio_get_destination_status(destination: i32) -> bool {
};
return match reply {
Message::UpDestinationsReply(x) => x,
_ => panic!("received unexpected reply to UpDestinationsRequest: {:?}", reply),
_ => panic!("received unexpected reply to UpDestinationsRequest: {:?}", reply)
};
}
}
destination == 0
}
}

192
src/runtime/src/kernel/dma.rs
View File

@ -1,16 +1,21 @@
use alloc::{string::String, vec::Vec};
use crate::{
pl::csr,
artiq_raise,
rtio,
};
use alloc::{vec::Vec, string::String, boxed::Box};
use cslice::CSlice;
use super::{KERNEL_IMAGE, KERNEL_CHANNEL_0TO1, KERNEL_CHANNEL_1TO0, Message};
use core::mem;
use cslice::CSlice;
use libcortex_a9::cache::dcci_slice;
use super::{Message, KERNEL_CHANNEL_0TO1, KERNEL_CHANNEL_1TO0, KERNEL_IMAGE};
use crate::{artiq_raise, pl::csr, rtio};
const ALIGNMENT: usize = 16 * 8;
#[repr(C)]
pub struct DmaTrace {
duration: i64,
address: i32,
uses_ddma: bool,
address: i32,
}
#[derive(Clone, Debug)]
@ -18,7 +23,6 @@ pub struct DmaRecorder {
pub name: String,
pub buffer: Vec<u8>,
pub duration: i64,
pub enable_ddma: bool,
}
static mut RECORDER: Option<DmaRecorder> = None;
@ -29,13 +33,10 @@ pub unsafe fn init_dma_recorder() {
mem::forget(mem::replace(&mut RECORDER, None));
}
pub extern "C" fn dma_record_start(name: CSlice<u8>) {
pub extern fn dma_record_start(name: CSlice<u8>) {
let name = String::from_utf8(name.as_ref().to_vec()).unwrap();
unsafe {
KERNEL_CHANNEL_1TO0
.as_mut()
.unwrap()
.send(Message::DmaEraseRequest(name.clone()));
KERNEL_CHANNEL_1TO0.as_mut().unwrap().send(Message::DmaEraseRequest(name.clone()));
}
unsafe {
if RECORDER.is_some() {
@ -43,44 +44,42 @@ pub extern "C" fn dma_record_start(name: CSlice<u8>) {
}
let library = KERNEL_IMAGE.as_ref().unwrap();
library.rebind(b"rtio_output", dma_record_output as *const ()).unwrap();
library
.rebind(b"rtio_output_wide", dma_record_output_wide as *const ())
.unwrap();
library.rebind(b"rtio_output",
dma_record_output as *const ()).unwrap();
library.rebind(b"rtio_output_wide",
dma_record_output_wide as *const ()).unwrap();
RECORDER = Some(DmaRecorder {
name,
buffer: Vec::new(),
duration: 0,
enable_ddma: false,
});
}
}
pub extern "C" fn dma_record_stop(duration: i64, enable_ddma: bool) {
pub extern fn dma_record_stop(duration: i64) {
unsafe {
if RECORDER.is_none() {
artiq_raise!("DMAError", "DMA is not recording")
}
let library = KERNEL_IMAGE.as_ref().unwrap();
library.rebind(b"rtio_output", rtio::output as *const ()).unwrap();
library
.rebind(b"rtio_output_wide", rtio::output_wide as *const ())
.unwrap();
library.rebind(b"rtio_output",
rtio::output as *const ()).unwrap();
library.rebind(b"rtio_output_wide",
rtio::output_wide as *const ()).unwrap();
let mut recorder = RECORDER.take().unwrap();
recorder.duration = duration;
recorder.enable_ddma = enable_ddma;
KERNEL_CHANNEL_1TO0
.as_mut()
.unwrap()
.send(Message::DmaPutRequest(recorder));
KERNEL_CHANNEL_1TO0.as_mut().unwrap().send(
Message::DmaPutRequest(recorder)
);
}
}
#[inline(always)]
unsafe fn dma_record_output_prepare(timestamp: i64, target: i32, words: usize) {
unsafe fn dma_record_output_prepare(timestamp: i64, target: i32,
words: usize) {
// See gateware/rtio/dma.py.
const HEADER_LENGTH: usize = /*length*/1 + /*channel*/3 + /*timestamp*/8 + /*address*/1;
let length = HEADER_LENGTH + /*data*/words * 4;
@ -88,36 +87,36 @@ unsafe fn dma_record_output_prepare(timestamp: i64, target: i32, words: usize) {
let buffer = &mut RECORDER.as_mut().unwrap().buffer;
buffer.reserve(length);
buffer.extend_from_slice(&[
(length >> 0) as u8,
(target >> 8) as u8,
(target >> 16) as u8,
(target >> 24) as u8,
(timestamp >> 0) as u8,
(timestamp >> 8) as u8,
(length >> 0) as u8,
(target >> 8) as u8,
(target >> 16) as u8,
(target >> 24) as u8,
(timestamp >> 0) as u8,
(timestamp >> 8) as u8,
(timestamp >> 16) as u8,
(timestamp >> 24) as u8,
(timestamp >> 32) as u8,
(timestamp >> 40) as u8,
(timestamp >> 48) as u8,
(timestamp >> 56) as u8,
(target >> 0) as u8,
(target >> 0) as u8,
]);
}
pub extern "C" fn dma_record_output(target: i32, word: i32) {
pub extern fn dma_record_output(target: i32, word: i32) {
unsafe {
let timestamp = rtio::now_mu();
dma_record_output_prepare(timestamp, target, 1);
RECORDER.as_mut().unwrap().buffer.extend_from_slice(&[
(word >> 0) as u8,
(word >> 8) as u8,
(word >> 0) as u8,
(word >> 8) as u8,
(word >> 16) as u8,
(word >> 24) as u8,
]);
}
}
pub extern "C" fn dma_record_output_wide(target: i32, words: &CSlice<i32>) {
pub extern fn dma_record_output_wide(target: i32, words: &CSlice<i32>) {
assert!(words.len() <= 16); // enforce the hardware limit
unsafe {
@ -126,8 +125,8 @@ pub extern "C" fn dma_record_output_wide(target: i32, words: &CSlice<i32>) {
let buffer = &mut RECORDER.as_mut().unwrap().buffer;
for word in words.as_ref().iter() {
buffer.extend_from_slice(&[
(word >> 0) as u8,
(word >> 8) as u8,
(word >> 0) as u8,
(word >> 8) as u8,
(word >> 16) as u8,
(word >> 24) as u8,
]);
@ -135,120 +134,79 @@ pub extern "C" fn dma_record_output_wide(target: i32, words: &CSlice<i32>) {
}
}
pub extern "C" fn dma_erase(name: CSlice<u8>) {
pub extern fn dma_erase(name: CSlice<u8>) {
let name = String::from_utf8(name.as_ref().to_vec()).unwrap();
unsafe {
KERNEL_CHANNEL_1TO0
.as_mut()
.unwrap()
.send(Message::DmaEraseRequest(name));
KERNEL_CHANNEL_1TO0.as_mut().unwrap().send(Message::DmaEraseRequest(name));
}
}
pub extern "C" fn dma_retrieve(name: CSlice<u8>) -> DmaTrace {
pub extern fn dma_retrieve(name: CSlice<u8>) -> DmaTrace {
let name = String::from_utf8(name.as_ref().to_vec()).unwrap();
unsafe {
KERNEL_CHANNEL_1TO0.as_mut().unwrap().send(Message::DmaGetRequest(name));
}
match unsafe { KERNEL_CHANNEL_0TO1.as_mut().unwrap() }.recv() {
match unsafe {KERNEL_CHANNEL_0TO1.as_mut().unwrap()}.recv() {
Message::DmaGetReply(None) => (),
Message::DmaGetReply(Some((address, duration, uses_ddma))) => {
Message::DmaGetReply(Some((mut v, duration))) => {
v.reserve(ALIGNMENT - 1);
let original_length = v.len();
let padding = ALIGNMENT - v.as_ptr() as usize % ALIGNMENT;
let padding = if padding == ALIGNMENT { 0 } else { padding };
for _ in 0..padding {
v.push(0);
}
// trailing zero to indicate end of buffer
v.push(0);
v.copy_within(0..original_length, padding);
dcci_slice(&v);
let v = Box::new(v);
let address = Box::into_raw(v) as *mut Vec<u8> as i32;
return DmaTrace {
address,
duration,
uses_ddma,
};
}
},
_ => panic!("Expected DmaGetReply after DmaGetRequest!"),
}
// we have to defer raising error as we have to drop the message first...
artiq_raise!("DMAError", "DMA trace not found");
}
pub extern "C" fn dma_playback(timestamp: i64, ptr: i32, _uses_ddma: bool) {
pub extern fn dma_playback(timestamp: i64, ptr: i32) {
unsafe {
let v = Box::from_raw(ptr as *mut Vec<u8>);
let padding = ALIGNMENT - v.as_ptr() as usize % ALIGNMENT;
let padding = if padding == ALIGNMENT { 0 } else { padding };
let ptr = v.as_ptr().add(padding) as i32;
csr::rtio_dma::base_address_write(ptr as u32);
csr::rtio_dma::time_offset_write(timestamp as u64);
csr::cri_con::selected_write(1);
csr::rtio_dma::enable_write(1);
#[cfg(has_drtio)]
if _uses_ddma {
KERNEL_CHANNEL_1TO0
.as_mut()
.unwrap()
.send(Message::DmaStartRemoteRequest {
id: ptr,
timestamp: timestamp,
});
}
while csr::rtio_dma::enable_read() != 0 {}
csr::cri_con::selected_write(0);
// leave the handle as we may try to do playback for another time.
mem::forget(v);
let error = csr::rtio_dma::error_read();
if error != 0 {
let timestamp = csr::rtio_dma::error_timestamp_read();
let channel = csr::rtio_dma::error_channel_read();
csr::rtio_dma::error_write(1);
if error & 1 != 0 {
artiq_raise!(
"RTIOUnderflow",
"RTIO underflow at {1} mu, channel {rtio_channel_info:0}",
channel as i64,
timestamp as i64,
0
);
artiq_raise!("RTIOUnderflow",
"RTIO underflow at {0} mu, channel {1}",
timestamp as i64, channel as i64, 0);
}
if error & 2 != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
"RTIO destination unreachable, output, at {1} mu, channel {rtio_channel_info:0}",
channel as i64,
timestamp as i64,
0
);
}
}
#[cfg(has_drtio)]
if _uses_ddma {
KERNEL_CHANNEL_1TO0
.as_mut()
.unwrap()
.send(Message::DmaAwaitRemoteRequest(ptr));
match KERNEL_CHANNEL_0TO1.as_mut().unwrap().recv() {
Message::DmaAwaitRemoteReply {
timeout,
error,
channel,
timestamp,
} => {
if timeout {
artiq_raise!(
"DMAError",
"Error running DMA on satellite device, timed out waiting for results"
);
}
if error & 1 != 0 {
artiq_raise!(
"RTIOUnderflow",
"RTIO underflow at {1} mu, channel {rtio_channel_info:0}",
channel as i64,
timestamp as i64,
0
);
}
if error & 2 != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
"RTIO destination unreachable, output, at {1} mu, channel {rtio_channel_info:0}",
channel as i64,
timestamp as i64,
0
);
}
}
_ => panic!("Expected DmaAwaitRemoteReply after DmaAwaitRemoteRequest!"),
artiq_raise!("RTIODestinationUnreachable",
"RTIO destination unreachable, output, at {0} mu, channel {1}",
timestamp as i64, channel as i64, 0);
}
}
}
}

43
src/runtime/src/kernel/mod.rs
View File

@ -1,16 +1,15 @@
use alloc::{string::String, vec::Vec};
use core::ptr;
use alloc::{vec::Vec, string::String};
use libcortex_a9::{mutex::Mutex, semaphore::Semaphore, sync_channel};
use libcortex_a9::{mutex::Mutex, sync_channel, semaphore::Semaphore};
use crate::eh_artiq;
mod control;
pub use control::Control;
mod api;
pub mod core1;
mod dma;
mod api;
mod rpc;
mod dma;
pub use dma::DmaRecorder;
mod cache;
@ -22,7 +21,7 @@ pub struct RPCException {
pub file: u32,
pub line: i32,
pub column: i32,
pub function: u32,
pub function: u32
}
#[derive(Debug, Clone)]
@ -32,16 +31,11 @@ pub enum Message {
LoadFailed,
StartRequest,
KernelFinished(u8),
KernelException(
&'static [Option<eh_artiq::Exception<'static>>],
&'static [eh_artiq::StackPointerBacktrace],
&'static [(usize, usize)],
u8,
),
RpcSend {
is_async: bool,
data: Vec<u8>,
},
KernelException(&'static [Option<eh_artiq::Exception<'static>>],
&'static [eh_artiq::StackPointerBacktrace],
&'static [(usize, usize)],
u8),
RpcSend { is_async: bool, data: Vec<u8> },
RpcRecvRequest(*mut ()),
RpcRecvReply(Result<usize, RPCException>),
@ -52,21 +46,7 @@ pub enum Message {
DmaPutRequest(DmaRecorder),
DmaEraseRequest(String),
DmaGetRequest(String),
DmaGetReply(Option<(i32, i64, bool)>),
#[cfg(has_drtio)]
DmaStartRemoteRequest {
id: i32,
timestamp: i64,
},
#[cfg(has_drtio)]
DmaAwaitRemoteRequest(i32),
#[cfg(has_drtio)]
DmaAwaitRemoteReply {
timeout: bool,
error: u8,
channel: u32,
timestamp: u64,
},
DmaGetReply(Option<(Vec<u8>, i64)>),
#[cfg(has_drtio)]
UpDestinationsRequest(i32),
@ -84,3 +64,4 @@ static mut KERNEL_CHANNEL_1TO0: Option<sync_channel::Sender<'static, Message>> =
pub static mut KERNEL_IMAGE: *const core1::KernelImage = ptr::null();
static INIT_LOCK: Mutex<()> = Mutex::new(());

29
src/runtime/src/kernel/rpc.rs
View File

@ -1,11 +1,14 @@
//! Kernel-side RPC API
use alloc::vec::Vec;
use cslice::CSlice;
use super::{Message, KERNEL_CHANNEL_0TO1, KERNEL_CHANNEL_1TO0};
use crate::{eh_artiq, rpc::send_args};
use crate::eh_artiq;
use crate::rpc::send_args;
use super::{
KERNEL_CHANNEL_0TO1, KERNEL_CHANNEL_1TO0,
Message,
};
fn rpc_send_common(is_async: bool, service: u32, tag: &CSlice<u8>, data: *const *const ()) {
let core1_tx = unsafe { KERNEL_CHANNEL_1TO0.as_mut().unwrap() };
@ -14,15 +17,15 @@ fn rpc_send_common(is_async: bool, service: u32, tag: &CSlice<u8>, data: *const
core1_tx.send(Message::RpcSend { is_async, data: buffer });
}
pub extern "C" fn rpc_send(service: u32, tag: &CSlice<u8>, data: *const *const ()) {
pub extern fn rpc_send(service: u32, tag: &CSlice<u8>, data: *const *const ()) {
rpc_send_common(false, service, tag, data);
}
pub extern "C" fn rpc_send_async(service: u32, tag: &CSlice<u8>, data: *const *const ()) {
pub extern fn rpc_send_async(service: u32, tag: &CSlice<u8>, data: *const *const ()) {
rpc_send_common(true, service, tag, data);
}
pub extern "C" fn rpc_recv(slot: *mut ()) -> usize {
pub extern fn rpc_recv(slot: *mut ()) -> usize {
let reply = unsafe {
let core1_rx = KERNEL_CHANNEL_0TO1.as_mut().unwrap();
let core1_tx = KERNEL_CHANNEL_1TO0.as_mut().unwrap();
@ -33,15 +36,15 @@ pub extern "C" fn rpc_recv(slot: *mut ()) -> usize {
Message::RpcRecvReply(Ok(alloc_size)) => alloc_size,
Message::RpcRecvReply(Err(exception)) => unsafe {
eh_artiq::raise(&eh_artiq::Exception {
id: exception.id,
file: CSlice::new(exception.file as *const u8, usize::MAX),
line: exception.line as u32,
column: exception.column as u32,
id: exception.id,
file: CSlice::new(exception.file as *const u8, usize::MAX),
line: exception.line as u32,
column: exception.column as u32,
function: CSlice::new(exception.function as *const u8, usize::MAX),
message: CSlice::new(exception.message as *const u8, usize::MAX),
param: exception.param,
message: CSlice::new(exception.message as *const u8, usize::MAX),
param: exception.param
})
},
_ => panic!("received unexpected reply to RpcRecvRequest: {:?}", reply),
_ => panic!("received unexpected reply to RpcRecvRequest: {:?}", reply)
}
}

76
src/runtime/src/main.rs
View File

@ -1,6 +1,6 @@
#![no_std]
#![no_main]
#![recursion_limit = "1024"] // for futures_util::select!
#![recursion_limit="1024"] // for futures_util::select!
#![feature(alloc_error_handler)]
#![feature(panic_info_message)]
#![feature(c_variadic)]
@ -9,38 +9,28 @@
#![feature(naked_functions)]
#![feature(asm)]
#[macro_use]
extern crate alloc;
#[cfg(feature = "target_kasli_soc")]
use core::cell::RefCell;
use log::{info, warn, error};
use libasync::{block_async, task};
#[cfg(feature = "target_kasli_soc")]
use libboard_artiq::io_expander;
use libboard_artiq::{identifier_read, logger, pl};
use libboard_zynq::{gic, mpcore, timer::GlobalTimer};
use libconfig::Config;
use libcortex_a9::l2c::enable_l2_cache;
use libboard_zynq::{timer::GlobalTimer, mpcore, gic};
use libasync::{task, block_async};
use libsupport_zynq::ram;
use log::{error, info, warn};
use nb;
use void::Void;
use libconfig::Config;
use libcortex_a9::l2c::enable_l2_cache;
use libboard_artiq::{logger, identifier_read, init_gateware, pl};
#[cfg(feature = "target_kasli_soc")]
use libboard_artiq::io_expander;
const ASYNC_ERROR_COLLISION: u8 = 1 << 0;
const ASYNC_ERROR_BUSY: u8 = 1 << 1;
const ASYNC_ERROR_SEQUENCE_ERROR: u8 = 1 << 2;
mod analyzer;
mod comms;
mod eh_artiq;
mod i2c;
mod irq;
mod kernel;
mod mgmt;
mod moninj;
mod panic;
mod proto_async;
mod comms;
mod rpc;
#[cfg(ki_impl = "csr")]
#[path = "rtio_csr.rs"]
@ -48,9 +38,16 @@ mod rtio;
#[cfg(ki_impl = "acp")]
#[path = "rtio_acp.rs"]
mod rtio;
mod rtio_clocking;
mod rtio_dma;
mod rtio_mgt;
mod rtio_clocking;
mod kernel;
mod moninj;
mod eh_artiq;
mod panic;
mod mgmt;
mod analyzer;
mod irq;
mod i2c;
static mut SEEN_ASYNC_ERRORS: u8 = 0;
@ -76,28 +73,16 @@ async fn report_async_rtio_errors() {
unsafe {
let errors = pl::csr::rtio_core::async_error_read();
if errors & ASYNC_ERROR_COLLISION != 0 {
let channel = pl::csr::rtio_core::collision_channel_read();
error!(
"RTIO collision involving channel 0x{:04x}:{}",
channel,
rtio_mgt::resolve_channel_name(channel as u32)
);
error!("RTIO collision involving channel {}",
pl::csr::rtio_core::collision_channel_read());
}
if errors & ASYNC_ERROR_BUSY != 0 {
let channel = pl::csr::rtio_core::busy_channel_read();
error!(
"RTIO busy error involving channel 0x{:04x}:{}",
channel,
rtio_mgt::resolve_channel_name(channel as u32)
);
error!("RTIO busy error involving channel {}",
pl::csr::rtio_core::busy_channel_read());
}
if errors & ASYNC_ERROR_SEQUENCE_ERROR != 0 {
let channel = pl::csr::rtio_core::sequence_error_channel_read();
error!(
"RTIO sequence error involving channel 0x{:04x}:{}",
channel,
rtio_mgt::resolve_channel_name(channel as u32)
);
error!("RTIO sequence error involving channel {}",
pl::csr::rtio_core::sequence_error_channel_read());
}
SEEN_ASYNC_ERRORS = errors;
pl::csr::rtio_core::async_error_write(errors);
@ -105,6 +90,8 @@ async fn report_async_rtio_errors() {
}
}
#[cfg(feature = "target_kasli_soc")]
async fn io_expanders_service(
i2c_bus: RefCell<&mut libboard_zynq::i2c::I2c>,
@ -123,15 +110,16 @@ async fn io_expanders_service(
.expect("I2C I/O expander #1 service failed");
}
}
static mut LOG_BUFFER: [u8; 1 << 17] = [0; 1 << 17];
static mut LOG_BUFFER: [u8; 1<<17] = [0; 1<<17];
#[no_mangle]
pub fn main_core0() {
enable_l2_cache(0x8);
let mut timer = GlobalTimer::start();
let buffer_logger = unsafe { logger::BufferLogger::new(&mut LOG_BUFFER[..]) };
let buffer_logger = unsafe {
logger::BufferLogger::new(&mut LOG_BUFFER[..])
};
buffer_logger.set_uart_log_level(log::LevelFilter::Info);
buffer_logger.register();
log::set_max_level(log::LevelFilter::Info);
@ -141,10 +129,10 @@ pub fn main_core0() {
ram::init_alloc_core0();
gic::InterruptController::gic(mpcore::RegisterBlock::mpcore()).enable_interrupts();
init_gateware();
info!("gateware ident: {}", identifier_read(&mut [0; 64]));
i2c::init();
#[cfg(feature = "target_kasli_soc")]
let i2c_bus = unsafe { (i2c::I2C_BUS).as_mut().unwrap() };
#[cfg(feature = "target_kasli_soc")]

55
src/runtime/src/mgmt.rs
View File

@ -1,17 +1,16 @@
use alloc::{rc::Rc, string::String, vec::Vec};
use core::cell::RefCell;
use futures::{future::poll_fn, task::Poll};
use libasync::{smoltcp::TcpStream, task};
use libboard_artiq::logger::{BufferLogger, LogBufferRef};
use libboard_zynq::{slcr, smoltcp};
use libboard_zynq::smoltcp;
use libconfig::Config;
use log::{self, debug, error, info, warn, LevelFilter};
use core::cell::RefCell;
use alloc::{rc::Rc, vec::Vec, string::String};
use log::{self, info, debug, warn, error, LevelFilter};
use libboard_artiq::logger::{BufferLogger, LogBufferRef};
use crate::proto_async::*;
use num_derive::FromPrimitive;
use num_traits::FromPrimitive;
use crate::proto_async::*;
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Error {
NetworkError(smoltcp::Error),
@ -25,10 +24,10 @@ type Result<T> = core::result::Result<T, Error>;
impl core::fmt::Display for Error {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
match self {
&Error::NetworkError(error) => write!(f, "network error: {}", error),
&Error::NetworkError(error) => write!(f, "network error: {}", error),
&Error::UnknownLogLevel(lvl) => write!(f, "unknown log level {}", lvl),
&Error::UnexpectedPattern => write!(f, "unexpected pattern"),
&Error::UnrecognizedPacket => write!(f, "unrecognized packet"),
&Error::UnexpectedPattern => write!(f, "unexpected pattern"),
&Error::UnrecognizedPacket => write!(f, "unrecognized packet"),
}
}
}
@ -45,7 +44,6 @@ pub enum Request {
ClearLog = 2,
PullLog = 7,
SetLogFilter = 3,
Reboot = 5,
SetUartLogFilter = 6,
ConfigRead = 12,
@ -57,7 +55,6 @@ pub enum Request {
pub enum Reply {
Success = 1,
LogContent = 2,
RebootImminent = 3,
Error = 6,
ConfigData = 7,
}
@ -75,7 +72,9 @@ async fn read_log_level_filter(stream: &mut TcpStream) -> Result<log::LevelFilte
}
async fn get_logger_buffer_pred<F>(f: F) -> LogBufferRef<'static>
where F: Fn(&LogBufferRef) -> bool {
where
F: Fn(&LogBufferRef) -> bool,
{
poll_fn(|ctx| {
let logger = unsafe { BufferLogger::get_logger().as_mut().unwrap() };
match logger.buffer() {
@ -111,7 +110,10 @@ async fn read_key(stream: &mut TcpStream) -> Result<String> {
Ok(String::from_utf8(buffer).unwrap())
}
async fn handle_connection(stream: &mut TcpStream, pull_id: Rc<RefCell<u32>>, cfg: Rc<Config>) -> Result<()> {
async fn handle_connection(
stream: &mut TcpStream,
pull_id: Rc<RefCell<u32>>,
cfg: Rc<Config>) -> Result<()> {
if !expect(&stream, b"ARTIQ management\n").await? {
return Err(Error::UnexpectedPattern);
}
@ -159,7 +161,7 @@ async fn handle_connection(stream: &mut TcpStream, pull_id: Rc<RefCell<u32>>, cf
logger.set_buffer_log_level(LevelFilter::Trace);
}
}
}
},
Request::SetLogFilter => {
let lvl = read_log_level_filter(stream).await?;
info!("Changing log level to {}", lvl);
@ -170,7 +172,10 @@ async fn handle_connection(stream: &mut TcpStream, pull_id: Rc<RefCell<u32>>, cf
let lvl = read_log_level_filter(stream).await?;
info!("Changing UART log level to {}", lvl);
unsafe {
BufferLogger::get_logger().as_ref().unwrap().set_uart_log_level(lvl);
BufferLogger::get_logger()
.as_ref()
.unwrap()
.set_uart_log_level(lvl);
}
write_i8(stream, Reply::Success as i8).await?;
}
@ -186,12 +191,16 @@ async fn handle_connection(stream: &mut TcpStream, pull_id: Rc<RefCell<u32>>, cf
warn!("read error: no such key");
write_i8(stream, Reply::Error as i8).await?;
}
}
},
Request::ConfigWrite => {
let key = read_key(stream).await?;
debug!("write key: {}", key);
let len = read_i32(stream).await?;
let len = if len <= 0 { 0 } else { len as usize };
let len = if len <= 0 {
0
} else {
len as usize
};
let mut buffer = Vec::with_capacity(len);
unsafe {
buffer.set_len(len);
@ -206,7 +215,7 @@ async fn handle_connection(stream: &mut TcpStream, pull_id: Rc<RefCell<u32>>, cf
error!("failed to write: {:?}", value);
write_i8(stream, Reply::Error as i8).await?;
}
}
},
Request::ConfigRemove => {
let key = read_key(stream).await?;
debug!("erase key: {}", key);
@ -219,12 +228,6 @@ async fn handle_connection(stream: &mut TcpStream, pull_id: Rc<RefCell<u32>>, cf
write_i8(stream, Reply::Error as i8).await?;
}
}
Request::Reboot => {
info!("rebooting");
write_i8(stream, Reply::RebootImminent as i8).await?;
stream.flush().await?;
slcr::reboot();
}
}
}
}

137
src/runtime/src/moninj.rs
View File

@ -1,23 +1,26 @@
use core::{fmt, cell::RefCell};
use alloc::{collections::BTreeMap, rc::Rc};
use core::{cell::RefCell, fmt};
use futures::{pin_mut, select_biased, FutureExt};
use libasync::{block_async, nb, smoltcp::TcpStream, task};
use libboard_artiq::drtio_routing;
use libboard_zynq::{smoltcp, time::Milliseconds, timer::GlobalTimer};
use libcortex_a9::mutex::Mutex;
use log::{debug, info, warn};
use num_derive::{FromPrimitive, ToPrimitive};
use num_traits::{FromPrimitive, ToPrimitive};
use void::Void;
use libboard_artiq::drtio_routing;
use libboard_zynq::{smoltcp, timer::GlobalTimer, time::Milliseconds};
use libasync::{task, smoltcp::TcpStream, block_async, nb};
use libcortex_a9::mutex::Mutex;
use num_derive::{FromPrimitive, ToPrimitive};
use num_traits::{FromPrimitive, ToPrimitive};
use futures::{pin_mut, select_biased, FutureExt};
use crate::proto_async::*;
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Error {
NetworkError(smoltcp::Error),
UnexpectedPattern,
UnrecognizedPacket,
UnrecognizedPacket
}
pub type Result<T> = core::result::Result<T, Error>;
@ -26,8 +29,8 @@ impl fmt::Display for Error {
fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
match self {
&Error::NetworkError(error) => write!(f, "network error: {}", error),
&Error::UnexpectedPattern => write!(f, "unexpected pattern"),
&Error::UnrecognizedPacket => write!(f, "unrecognized packet"),
&Error::UnexpectedPattern => write!(f, "unexpected pattern"),
&Error::UnrecognizedPacket => write!(f, "unrecognized packet"),
}
}
}
@ -43,102 +46,60 @@ enum HostMessage {
MonitorProbe = 0,
MonitorInjection = 3,
Inject = 1,
GetInjectionStatus = 2,
GetInjectionStatus = 2
}
#[derive(Debug, FromPrimitive, ToPrimitive)]
enum DeviceMessage {
MonitorStatus = 0,
InjectionStatus = 1,
InjectionStatus = 1
}
#[cfg(has_drtio)]
mod remote_moninj {
use super::*;
use libboard_artiq::drtioaux_async;
use crate::rtio_mgt::drtio;
use log::error;
use super::*;
use crate::rtio_mgt::drtio;
pub async fn read_probe(
aux_mutex: &Rc<Mutex<bool>>,
timer: GlobalTimer,
linkno: u8,
destination: u8,
channel: i32,
probe: i8,
) -> i64 {
let reply = drtio::aux_transact(
aux_mutex,
linkno,
&drtioaux_async::Packet::MonitorRequest {
destination: destination,
channel: channel as _,
probe: probe as _,
},
timer,
)
.await;
pub async fn read_probe(aux_mutex: &Rc<Mutex<bool>>, timer: GlobalTimer, linkno: u8, destination: u8, channel: i32, probe: i8) -> i64 {
let reply = drtio::aux_transact(aux_mutex, linkno, &drtioaux_async::Packet::MonitorRequest {
destination: destination,
channel: channel as _,
probe: probe as _},
timer).await;
match reply {
Ok(drtioaux_async::Packet::MonitorReply { value }) => return value as i64,
Ok(packet) => error!("received unexpected aux packet: {:?}", packet),
Err("link went down") => {
debug!("link is down");
}
Err(e) => error!("aux packet error ({})", e),
Err("link went down") => { debug!("link is down"); },
Err(e) => error!("aux packet error ({})", e)
}
0
}
pub async fn inject(
aux_mutex: &Rc<Mutex<bool>>,
_timer: GlobalTimer,
linkno: u8,
destination: u8,
channel: i32,
overrd: i8,
value: i8,
) {
pub async fn inject(aux_mutex: &Rc<Mutex<bool>>, _timer: GlobalTimer, linkno: u8, destination: u8, channel: i32, overrd: i8, value: i8) {
let _lock = aux_mutex.lock();
drtioaux_async::send(
linkno,
&drtioaux_async::Packet::InjectionRequest {
destination: destination,
channel: channel as _,
overrd: overrd as _,
value: value as _,
},
)
.await
.unwrap();
drtioaux_async::send(linkno, &drtioaux_async::Packet::InjectionRequest {
destination: destination,
channel: channel as _,
overrd: overrd as _,
value: value as _
}).await.unwrap();
}
pub async fn read_injection_status(
aux_mutex: &Rc<Mutex<bool>>,
timer: GlobalTimer,
linkno: u8,
destination: u8,
channel: i32,
overrd: i8,
) -> i8 {
let reply = drtio::aux_transact(
aux_mutex,
linkno,
pub async fn read_injection_status(aux_mutex: &Rc<Mutex<bool>>, timer: GlobalTimer, linkno: u8, destination: u8, channel: i32, overrd: i8) -> i8 {
let reply = drtio::aux_transact(aux_mutex,
linkno,
&drtioaux_async::Packet::InjectionStatusRequest {
destination: destination,
channel: channel as _,
overrd: overrd as _,
},
timer,
)
.await;
overrd: overrd as _},
timer).await;
match reply {
Ok(drtioaux_async::Packet::InjectionStatusReply { value }) => return value as i8,
Ok(packet) => error!("received unexpected aux packet: {:?}", packet),
Err("link went down") => {
debug!("link is down");
}
Err(e) => error!("aux packet error ({})", e),
Err("link went down") => { debug!("link is down"); },
Err(e) => error!("aux packet error ({})", e)
}
0
}
@ -196,12 +157,8 @@ macro_rules! dispatch {
}}
}
async fn handle_connection(
stream: &TcpStream,
timer: GlobalTimer,
_aux_mutex: &Rc<Mutex<bool>>,
_routing_table: &drtio_routing::RoutingTable,
) -> Result<()> {
async fn handle_connection(stream: &TcpStream, timer: GlobalTimer,
_aux_mutex: &Rc<Mutex<bool>>, _routing_table: &drtio_routing::RoutingTable) -> Result<()> {
if !expect(&stream, b"ARTIQ moninj\n").await? {
return Err(Error::UnexpectedPattern);
}
@ -298,13 +255,7 @@ async fn handle_connection(
}
}
pub fn start(
timer: GlobalTimer,
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &Rc<RefCell<drtio_routing::RoutingTable>>,
) {
let aux_mutex = aux_mutex.clone();
let routing_table = routing_table.clone();
pub fn start(timer: GlobalTimer, aux_mutex: Rc<Mutex<bool>>, routing_table: Rc<RefCell<drtio_routing::RoutingTable>>) {
task::spawn(async move {
loop {
let aux_mutex = aux_mutex.clone();

58
src/runtime/src/panic.rs
View File

@ -1,22 +1,22 @@
#[cfg(feature = "target_kasli_soc")]
use libboard_zynq::error_led::ErrorLED;
use libboard_zynq::{print, println, timer::GlobalTimer};
use libconfig::Config;
use libcortex_a9::regs::MPIDR;
use libboard_zynq::{print, println};
use libregister::RegisterR;
use log::error;
use libcortex_a9::regs::MPIDR;
use unwind::backtrace;
use crate::comms::soft_panic_main;
static mut PANICKED: [bool; 2] = [false; 2];
static mut SOFT_PANICKED: bool = false;
#[panic_handler]
fn panic(info: &core::panic::PanicInfo) -> ! {
let id = MPIDR.read().cpu_id() as usize;
let soft_panicked = unsafe { SOFT_PANICKED };
print!("Core {} panic at ", id);
print!("Core {} ", id);
unsafe {
if PANICKED[id] {
println!("nested panic!");
loop {}
}
PANICKED[id] = true;
}
print!("panic at ");
if let Some(location) = info.location() {
print!("{}:{}:{}", location.file(), location.line(), location.column());
} else {
@ -27,20 +27,6 @@ fn panic(info: &core::panic::PanicInfo) -> ! {
} else {
println!("");
}
unsafe {
// soft panics only allowed for core 0
if PANICKED[id] && (SOFT_PANICKED || id == 1) {
println!("nested panic!");
loop {}
}
SOFT_PANICKED = true;
PANICKED[id] = true;
}
#[cfg(feature = "target_kasli_soc")]
{
let mut err_led = ErrorLED::error_led();
err_led.toggle(true);
}
println!("Backtrace: ");
let _ = backtrace(|ip| {
// Backtrace gives us the return address, i.e. the address after the delay slot,
@ -48,26 +34,6 @@ fn panic(info: &core::panic::PanicInfo) -> ! {
print!("{:#08x} ", ip - 2 * 4);
});
println!("\nEnd backtrace");
if !soft_panicked && id == 0 {
soft_panic(info);
}
loop {}
}
fn soft_panic(info: &core::panic::PanicInfo) -> ! {
// write panic info to log, so coremgmt can also read it
if let Some(location) = info.location() {
error!("panic at {}:{}:{}", location.file(), location.line(), location.column());
} else {
error!("panic at unknown location");
}
if let Some(message) = info.message() {
error!("panic message: {}", message);
}
let timer = GlobalTimer::start();
let cfg = match Config::new() {
Ok(cfg) => cfg,
Err(_) => Config::new_dummy(),
};
soft_panic_main(timer, cfg);
}

61
src/runtime/src/proto_async.rs
View File

@ -1,7 +1,8 @@
use core::{cell::RefCell, cmp::min};
use core::cmp::min;
use core::cell::RefCell;
use libasync::smoltcp::TcpStream;
use libboard_zynq::smoltcp;
use libasync::smoltcp::TcpStream;
type Result<T> = core::result::Result<T, smoltcp::Error>;
@ -13,27 +14,25 @@ enum RecvState<T> {
pub async fn expect(stream: &TcpStream, pattern: &[u8]) -> Result<bool> {
let mut state = RecvState::NeedsMore(0, true);
loop {
state = stream
.recv(|buf| {
let mut consumed = 0;
if let RecvState::NeedsMore(mut cur_index, _) = state {
for b in buf.iter() {
consumed += 1;
if *b == pattern[cur_index] {
if cur_index + 1 == pattern.len() {
return (consumed, RecvState::Completed(true));
}
} else {
return (consumed, RecvState::Completed(false));
state = stream.recv(|buf| {
let mut consumed = 0;
if let RecvState::NeedsMore(mut cur_index, _) = state {
for b in buf.iter() {
consumed += 1;
if *b == pattern[cur_index] {
if cur_index + 1 == pattern.len() {
return (consumed, RecvState::Completed(true));
}
cur_index += 1;
} else {
return (consumed, RecvState::Completed(false));
}
(consumed, RecvState::NeedsMore(cur_index, true))
} else {
unreachable!();
cur_index += 1;
}
})
.await?;
(consumed, RecvState::NeedsMore(cur_index, true))
} else {
unreachable!();
}
}).await?;
if let RecvState::Completed(result) = state {
return Ok(result);
}
@ -41,11 +40,15 @@ pub async fn expect(stream: &TcpStream, pattern: &[u8]) -> Result<bool> {
}
pub async fn read_bool(stream: &TcpStream) -> Result<bool> {
Ok(stream.recv(|buf| (1, buf[0] != 0)).await?)
Ok(stream.recv(|buf| {
(1, buf[0] != 0)
}).await?)
}
pub async fn read_i8(stream: &TcpStream) -> Result<i8> {
Ok(stream.recv(|buf| (1, buf[0] as i8)).await?)
Ok(stream.recv(|buf| {
(1, buf[0] as i8)
}).await?)
}
pub async fn read_i32(stream: &TcpStream) -> Result<i32> {
@ -65,14 +68,12 @@ pub async fn read_chunk(stream: &TcpStream, destination: &mut [u8]) -> Result<()
let destination = RefCell::new(destination);
let mut done = 0;
while done < total {
let count = stream
.recv(|buf| {
let mut destination = destination.borrow_mut();
let count = min(total - done, buf.len());
destination[done..done + count].copy_from_slice(&buf[..count]);
(count, count)
})
.await?;
let count = stream.recv(|buf| {
let mut destination = destination.borrow_mut();
let count = min(total - done, buf.len());
destination[done..done + count].copy_from_slice(&buf[..count]);
(count, count)
}).await?;
done += count;
}
Ok(())

222
src/runtime/src/rpc.rs
View File

@ -1,17 +1,18 @@
use alloc::boxed::Box;
use core::{future::Future, str};
use async_recursion::async_recursion;
use byteorder::{ByteOrder, NativeEndian};
use core_io::{Error, Write};
use cslice::{CMutSlice, CSlice};
use io::proto::ProtoWrite;
use libasync::smoltcp::TcpStream;
use libboard_zynq::smoltcp;
use core::str;
use core::future::Future;
use cslice::{CSlice, CMutSlice};
use log::trace;
use byteorder::{NativeEndian, ByteOrder};
use self::tag::{split_tag, Tag, TagIterator};
use core_io::{Write, Error};
use libboard_zynq::smoltcp;
use libasync::smoltcp::TcpStream;
use alloc::boxed::Box;
use async_recursion::async_recursion;
use io::proto::ProtoWrite;
use crate::proto_async;
use self::tag::{Tag, TagIterator, split_tag};
#[inline]
fn round_up(val: usize, power_of_two: usize) -> usize {
@ -51,17 +52,17 @@ async unsafe fn recv_elements<F>(
elt_tag: Tag<'async_recursion>,
length: usize,
storage: *mut (),
alloc: &(impl Fn(usize) -> F + 'async_recursion),
alloc: &(impl Fn(usize) -> F + 'async_recursion)
) -> Result<(), smoltcp::Error>
where
F: Future<Output = *mut ()>,
F: Future<Output=*mut ()>,
{
// List of simple types are special-cased in the protocol for performance.
match elt_tag {
Tag::Bool => {
let dest = core::slice::from_raw_parts_mut(storage as *mut u8, length);
proto_async::read_chunk(stream, dest).await?;
}
},
Tag::Int32 => {
let ptr = storage as *mut u32;
let dest = core::slice::from_raw_parts_mut(ptr as *mut u8, length * 4);
@ -69,7 +70,7 @@ where
drop(dest);
let dest = core::slice::from_raw_parts_mut(ptr, length);
NativeEndian::from_slice_u32(dest);
}
},
Tag::Int64 | Tag::Float64 => {
let ptr = storage as *mut u64;
let dest = core::slice::from_raw_parts_mut(ptr as *mut u8, length * 8);
@ -77,7 +78,7 @@ where
drop(dest);
let dest = core::slice::from_raw_parts_mut(ptr, length);
NativeEndian::from_slice_u64(dest);
}
},
_ => {
let mut data = storage;
for _ in 0..length {
@ -94,37 +95,36 @@ where
/// invoked any number of times with the size of the required allocation as a parameter
/// (which is assumed to be correctly aligned for all payload types).
#[async_recursion(?Send)]
async unsafe fn recv_value<F>(
stream: &TcpStream,
tag: Tag<'async_recursion>,
data: &mut *mut (),
alloc: &(impl Fn(usize) -> F + 'async_recursion),
) -> Result<(), smoltcp::Error>
where
F: Future<Output = *mut ()>,
async unsafe fn recv_value<F>(stream: &TcpStream, tag: Tag<'async_recursion>, data: &mut *mut (),
alloc: &(impl Fn(usize) -> F + 'async_recursion))
-> Result<(), smoltcp::Error>
where F: Future<Output=*mut ()>
{
macro_rules! consume_value {
($ty:ty, | $ptr:ident | $map:expr) => {{
($ty:ty, |$ptr:ident| $map:expr) => ({
let $ptr = align_ptr_mut::<$ty>(*data);
*data = $ptr.offset(1) as *mut ();
$map
}};
})
}
match tag {
Tag::None => Ok(()),
Tag::Bool => consume_value!(i8, |ptr| {
*ptr = proto_async::read_i8(stream).await?;
Ok(())
}),
Tag::Int32 => consume_value!(i32, |ptr| {
*ptr = proto_async::read_i32(stream).await?;
Ok(())
}),
Tag::Int64 | Tag::Float64 => consume_value!(i64, |ptr| {
*ptr = proto_async::read_i64(stream).await?;
Ok(())
}),
Tag::Bool =>
consume_value!(i8, |ptr| {
*ptr = proto_async::read_i8(stream).await?;
Ok(())
}),
Tag::Int32 =>
consume_value!(i32, |ptr| {
*ptr = proto_async::read_i32(stream).await?;
Ok(())
}),
Tag::Int64 | Tag::Float64 =>
consume_value!(i64, |ptr| {
*ptr = proto_async::read_i64(stream).await?;
Ok(())
}),
Tag::String | Tag::Bytes | Tag::ByteArray => {
consume_value!(CMutSlice<u8>, |ptr| {
let length = proto_async::read_i32(stream).await? as usize;
@ -148,10 +148,7 @@ where
}
Tag::List(it) => {
#[repr(C)]
struct List {
elements: *mut (),
length: usize,
}
struct List { elements: *mut (), length: usize }
consume_value!(*mut List, |ptr_to_list| {
let tag = it.clone().next().expect("truncated tag");
let length = proto_async::read_i32(stream).await? as usize;
@ -183,7 +180,7 @@ where
for _ in 0..num_dims {
let len = proto_async::read_i32(stream).await? as usize;
total_len *= len;
consume_value!(usize, |ptr| *ptr = len)
consume_value!(usize, |ptr| *ptr = len )
}
// Allocate backing storage for elements; deserialize them.
@ -201,18 +198,14 @@ where
Ok(())
}
Tag::Keyword(_) => unreachable!(),
Tag::Object => unreachable!(),
Tag::Object => unreachable!()
}
}
pub async fn recv_return<F>(
stream: &TcpStream,
tag_bytes: &[u8],
data: *mut (),
alloc: &impl Fn(usize) -> F,
) -> Result<(), smoltcp::Error>
where
F: Future<Output = *mut ()>,
pub async fn recv_return<F>(stream: &TcpStream, tag_bytes: &[u8], data: *mut (),
alloc: &impl Fn(usize) -> F)
-> Result<(), smoltcp::Error>
where F: Future<Output=*mut ()>
{
let mut it = TagIterator::new(tag_bytes);
trace!("recv ...->{}", it);
@ -224,8 +217,10 @@ where
Ok(())
}
unsafe fn send_elements<W>(writer: &mut W, elt_tag: Tag, length: usize, data: *const ()) -> Result<(), Error>
where W: Write + ?Sized {
unsafe fn send_elements<W>(writer: &mut W, elt_tag: Tag, length: usize, data: *const ())
-> Result<(), Error>
where W: Write + ?Sized
{
writer.write_u8(elt_tag.as_u8())?;
match elt_tag {
// we cannot use NativeEndian::from_slice_i32 as the data is not mutable,
@ -233,15 +228,15 @@ where W: Write + ?Sized {
Tag::Bool => {
let slice = core::slice::from_raw_parts(data as *const u8, length);
writer.write_all(slice)?;
}
},
Tag::Int32 => {
let slice = core::slice::from_raw_parts(data as *const u8, length * 4);
writer.write_all(slice)?;
}
},
Tag::Int64 | Tag::Float64 => {
let slice = core::slice::from_raw_parts(data as *const u8, length * 8);
writer.write_all(slice)?;
}
},
_ => {
let mut data = data;
for _ in 0..length {
@ -252,26 +247,36 @@ where W: Write + ?Sized {
Ok(())
}
unsafe fn send_value<W>(writer: &mut W, tag: Tag, data: &mut *const ()) -> Result<(), Error>
where W: Write + ?Sized {
unsafe fn send_value<W>(writer: &mut W, tag: Tag, data: &mut *const ())
-> Result<(), Error>
where W: Write + ?Sized
{
macro_rules! consume_value {
($ty:ty, | $ptr:ident | $map:expr) => {{
($ty:ty, |$ptr:ident| $map:expr) => ({
let $ptr = align_ptr::<$ty>(*data);
*data = $ptr.offset(1) as *const ();
$map
}};
})
}
writer.write_u8(tag.as_u8())?;
match tag {
Tag::None => Ok(()),
Tag::Bool => consume_value!(u8, |ptr| writer.write_u8(*ptr)),
Tag::Int32 => consume_value!(u32, |ptr| writer.write_u32(*ptr)),
Tag::Int64 | Tag::Float64 => consume_value!(u64, |ptr| writer.write_u64(*ptr)),
Tag::String => consume_value!(CSlice<u8>, |ptr| {
writer.write_string(str::from_utf8((*ptr).as_ref()).unwrap())
}),
Tag::Bytes | Tag::ByteArray => consume_value!(CSlice<u8>, |ptr| writer.write_bytes((*ptr).as_ref())),
Tag::Bool =>
consume_value!(u8, |ptr|
writer.write_u8(*ptr)),
Tag::Int32 =>
consume_value!(u32, |ptr|
writer.write_u32(*ptr)),
Tag::Int64 | Tag::Float64 =>
consume_value!(u64, |ptr|
writer.write_u64(*ptr)),
Tag::String =>
consume_value!(CSlice<u8>, |ptr|
writer.write_string(str::from_utf8((*ptr).as_ref()).unwrap())),
Tag::Bytes | Tag::ByteArray =>
consume_value!(CSlice<u8>, |ptr|
writer.write_bytes((*ptr).as_ref())),
Tag::Tuple(it, arity) => {
let mut it = it.clone();
writer.write_u8(arity)?;
@ -286,10 +291,7 @@ where W: Write + ?Sized {
}
Tag::List(it) => {
#[repr(C)]
struct List {
elements: *const (),
length: u32,
}
struct List { elements: *const (), length: u32 }
consume_value!(&List, |ptr| {
let length = (**ptr).length as usize;
writer.write_u32((*ptr).length)?;
@ -299,7 +301,7 @@ where W: Write + ?Sized {
}
Tag::Array(it, num_dims) => {
writer.write_u8(num_dims)?;
consume_value!(*const (), |buffer| {
consume_value!(*const(), |buffer| {
let elt_tag = it.clone().next().expect("truncated tag");
let mut total_len = 1;
@ -322,9 +324,7 @@ where W: Write + ?Sized {
}
Tag::Keyword(it) => {
#[repr(C)]
struct Keyword<'a> {
name: CSlice<'a, u8>,
}
struct Keyword<'a> { name: CSlice<'a, u8> }
consume_value!(Keyword, |ptr| {
writer.write_string(str::from_utf8((*ptr).name.as_ref()).unwrap())?;
let tag = it.clone().next().expect("truncated tag");
@ -336,16 +336,17 @@ where W: Write + ?Sized {
}
Tag::Object => {
#[repr(C)]
struct Object {
id: u32,
}
consume_value!(*const Object, |ptr| writer.write_u32((**ptr).id))
struct Object { id: u32 }
consume_value!(*const Object, |ptr|
writer.write_u32((**ptr).id))
}
}
}
pub fn send_args<W>(writer: &mut W, service: u32, tag_bytes: &[u8], data: *const *const ()) -> Result<(), Error>
where W: Write + ?Sized {
pub fn send_args<W>(writer: &mut W, service: u32, tag_bytes: &[u8], data: *const *const ())
-> Result<(), Error>
where W: Write + ?Sized
{
let (arg_tags_bytes, return_tag_bytes) = split_tag(tag_bytes);
let mut args_it = TagIterator::new(arg_tags_bytes);
@ -358,7 +359,7 @@ where W: Write + ?Sized {
let mut data = unsafe { *data.offset(index) };
unsafe { send_value(writer, arg_tag, &mut data)? };
} else {
break;
break
}
}
writer.write_u8(0)?;
@ -371,10 +372,10 @@ mod tag {
use core::fmt;
pub fn split_tag(tag_bytes: &[u8]) -> (&[u8], &[u8]) {
let tag_separator = tag_bytes
.iter()
.position(|&b| b == b':')
.expect("tag without a return separator");
let tag_separator =
tag_bytes.iter()
.position(|&b| b == b':')
.expect("tag without a return separator");
let (arg_tags_bytes, rest) = tag_bytes.split_at(tag_separator);
let return_tag_bytes = &rest[1..];
(arg_tags_bytes, return_tag_bytes)
@ -395,7 +396,7 @@ mod tag {
Array(TagIterator<'a>, u8),
Range(TagIterator<'a>),
Keyword(TagIterator<'a>),
Object,
Object
}
impl<'a> Tag<'a> {
@ -430,15 +431,14 @@ mod tag {
Tag::Tuple(it, arity) => {
let it = it.clone();
it.take(arity.into()).map(|t| t.alignment()).max().unwrap()
}
},
Tag::Range(it) => {
let it = it.clone();
it.take(3).map(|t| t.alignment()).max().unwrap()
}
// the ptr/length(s) pair is basically CSlice
Tag::Bytes | Tag::String | Tag::ByteArray | Tag::List(_) | Tag::Array(_, _) => {
core::mem::align_of::<CSlice<()>>()
}
Tag::Bytes | Tag::String | Tag::ByteArray | Tag::List(_) | Tag::Array(_, _) =>
core::mem::align_of::<CSlice<()>>(),
Tag::Keyword(_) => unreachable!("Tag::Keyword should not appear in composite types"),
Tag::Object => core::mem::align_of::<u32>(),
}
@ -484,7 +484,7 @@ mod tag {
#[derive(Debug, Clone, Copy)]
pub struct TagIterator<'a> {
data: &'a [u8],
data: &'a [u8]
}
impl<'a> TagIterator<'a> {
@ -492,14 +492,13 @@ mod tag {
TagIterator { data }
}
fn sub(&mut self, count: u8) -> TagIterator<'a> {
let data = self.data;
for _ in 0..count {
self.next().expect("truncated tag");
}
TagIterator {
data: &data[..(data.len() - self.data.len())],
}
TagIterator { data: &data[..(data.len() - self.data.len())] }
}
}
@ -508,7 +507,7 @@ mod tag {
fn next(&mut self) -> Option<Tag<'a>> {
if self.data.len() == 0 {
return None;
return None
}
let tag_byte = self.data[0];
@ -536,7 +535,7 @@ mod tag {
b'r' => Tag::Range(self.sub(1)),
b'k' => Tag::Keyword(self.sub(1)),
b'O' => Tag::Object,
_ => unreachable!(),
_ => unreachable!()
})
}
}
@ -553,14 +552,22 @@ mod tag {
}
match tag {
Tag::None => write!(f, "None")?,
Tag::Bool => write!(f, "Bool")?,
Tag::Int32 => write!(f, "Int32")?,
Tag::Int64 => write!(f, "Int64")?,
Tag::Float64 => write!(f, "Float64")?,
Tag::String => write!(f, "String")?,
Tag::Bytes => write!(f, "Bytes")?,
Tag::ByteArray => write!(f, "ByteArray")?,
Tag::None =>
write!(f, "None")?,
Tag::Bool =>
write!(f, "Bool")?,
Tag::Int32 =>
write!(f, "Int32")?,
Tag::Int64 =>
write!(f, "Int64")?,
Tag::Float64 =>
write!(f, "Float64")?,
Tag::String =>
write!(f, "String")?,
Tag::Bytes =>
write!(f, "Bytes")?,
Tag::ByteArray =>
write!(f, "ByteArray")?,
Tag::Tuple(it, _) => {
write!(f, "Tuple(")?;
it.fmt(f)?;
@ -586,7 +593,8 @@ mod tag {
it.fmt(f)?;
write!(f, ")")?;
}
Tag::Object => write!(f, "Object")?,
Tag::Object =>
write!(f, "Object")?,
}
}

171
src/runtime/src/rtio_acp.rs
View File

@ -1,19 +1,18 @@
use cslice::CSlice;
use vcell::VolatileCell;
use libcortex_a9::asm;
use crate::artiq_raise;
use core::sync::atomic::{fence, Ordering};
use cslice::CSlice;
use libcortex_a9::asm;
use vcell::VolatileCell;
use crate::pl::csr;
use crate::{artiq_raise, pl::csr, rtio_mgt::resolve_channel_name};
pub const RTIO_O_STATUS_WAIT: i32 = 1;
pub const RTIO_O_STATUS_UNDERFLOW: i32 = 2;
pub const RTIO_O_STATUS_DESTINATION_UNREACHABLE: i32 = 4;
pub const RTIO_I_STATUS_WAIT_EVENT: i32 = 1;
pub const RTIO_I_STATUS_OVERFLOW: i32 = 2;
#[allow(unused)]
pub const RTIO_I_STATUS_WAIT_STATUS: i32 = 4; // TODO
pub const RTIO_I_STATUS_DESTINATION_UNREACHABLE: i32 = 8;
pub const RTIO_O_STATUS_WAIT: i32 = 1;
pub const RTIO_O_STATUS_UNDERFLOW: i32 = 2;
pub const RTIO_O_STATUS_DESTINATION_UNREACHABLE: i32 = 4;
pub const RTIO_I_STATUS_WAIT_EVENT: i32 = 1;
pub const RTIO_I_STATUS_OVERFLOW: i32 = 2;
pub const RTIO_I_STATUS_WAIT_STATUS: i32 = 4; // TODO
pub const RTIO_I_STATUS_DESTINATION_UNREACHABLE: i32 = 8;
#[repr(C)]
pub struct TimestampedData {
@ -47,10 +46,10 @@ static mut TRANSACTION_BUFFER: Transaction = Transaction {
reply_timestamp: VolatileCell::new(0),
padding0: [0; 2],
padding1: [0; 2],
padding2: [0; 2],
padding2: [0; 2]
};
pub extern "C" fn init() {
pub extern fn init() {
unsafe {
csr::rtio_core::reset_write(1);
csr::rtio::engine_addr_base_write(&TRANSACTION_BUFFER as *const Transaction as u32);
@ -58,7 +57,7 @@ pub extern "C" fn init() {
}
}
pub extern "C" fn get_counter() -> i64 {
pub extern fn get_counter() -> i64 {
unsafe {
csr::rtio::counter_update_write(1);
csr::rtio::counter_read() as i64
@ -67,15 +66,15 @@ pub extern "C" fn get_counter() -> i64 {
static mut NOW: i64 = 0;
pub extern "C" fn now_mu() -> i64 {
pub extern fn now_mu() -> i64 {
unsafe { NOW }
}
pub extern "C" fn at_mu(t: i64) {
pub extern fn at_mu(t: i64) {
unsafe { NOW = t }
}
pub extern "C" fn delay_mu(dt: i64) {
pub extern fn delay_mu(dt: i64) {
unsafe { NOW += dt }
}
@ -87,34 +86,18 @@ unsafe fn process_exceptional_status(channel: i32, status: i32) {
while csr::rtio::o_status_read() as i32 & RTIO_O_STATUS_WAIT != 0 {}
}
if status & RTIO_O_STATUS_UNDERFLOW != 0 {
artiq_raise!(
"RTIOUnderflow",
format!(
"RTIO underflow at {{1}} mu, channel 0x{:04x}:{}, slack {{2}} mu",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
timestamp,
timestamp - get_counter()
);
artiq_raise!("RTIOUnderflow",
"RTIO underflow at {0} mu, channel {1}, slack {2} mu",
timestamp, channel as i64, timestamp - get_counter());
}
if status & RTIO_O_STATUS_DESTINATION_UNREACHABLE != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
format!(
"RTIO destination unreachable, output, at {{0}} mu, channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
timestamp,
channel as i64,
0
);
artiq_raise!("RTIODestinationUnreachable",
"RTIO destination unreachable, output, at {0} mu, channel {1}",
timestamp, channel as i64, 0);
}
}
pub extern "C" fn output(target: i32, data: i32) {
pub extern fn output(target: i32, data: i32) {
unsafe {
// Clear status so we can observe response
TRANSACTION_BUFFER.reply_status.set(0);
@ -142,7 +125,7 @@ pub extern "C" fn output(target: i32, data: i32) {
}
}
pub extern "C" fn output_wide(target: i32, data: CSlice<i32>) {
pub extern fn output_wide(target: i32, data: CSlice<i32>) {
unsafe {
// Clear status so we can observe response
TRANSACTION_BUFFER.reply_status.set(0);
@ -159,7 +142,7 @@ pub extern "C" fn output_wide(target: i32, data: CSlice<i32>) {
loop {
status = TRANSACTION_BUFFER.reply_status.get();
if status != 0 {
break;
break
}
}
@ -170,8 +153,8 @@ pub extern "C" fn output_wide(target: i32, data: CSlice<i32>) {
}
}
pub extern "C" fn input_timestamp(timeout: i64, channel: i32) -> i64 {
unsafe {
pub extern fn input_timestamp(timeout: i64, channel: i32) -> i64 {
unsafe {
// Clear status so we can observe response
TRANSACTION_BUFFER.reply_status.set(0);
@ -187,45 +170,29 @@ pub extern "C" fn input_timestamp(timeout: i64, channel: i32) -> i64 {
loop {
status = TRANSACTION_BUFFER.reply_status.get();
if status != 0 {
break;
break
}
}
if status & RTIO_I_STATUS_OVERFLOW != 0 {
artiq_raise!(
"RTIOOverflow",
format!(
"RTIO input overflow on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIOOverflow",
"RTIO input overflow on channel {0}",
channel as i64, 0, 0);
}
if status & RTIO_I_STATUS_WAIT_EVENT != 0 {
return -1;
return -1
}
if status & RTIO_I_STATUS_DESTINATION_UNREACHABLE != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
format!(
"RTIO destination unreachable, input, on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIODestinationUnreachable",
"RTIO destination unreachable, input, on channel {0}",
channel as i64, 0, 0);
}
TRANSACTION_BUFFER.reply_timestamp.get()
}
}
pub extern "C" fn input_data(channel: i32) -> i32 {
pub extern fn input_data(channel: i32) -> i32 {
unsafe {
TRANSACTION_BUFFER.reply_status.set(0);
@ -241,42 +208,26 @@ pub extern "C" fn input_data(channel: i32) -> i32 {
loop {
status = TRANSACTION_BUFFER.reply_status.get();
if status != 0 {
break;
break
}
}
if status & RTIO_I_STATUS_OVERFLOW != 0 {
artiq_raise!(
"RTIOOverflow",
format!(
"RTIO input overflow on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIOOverflow",
"RTIO input overflow on channel {0}",
channel as i64, 0, 0);
}
if status & RTIO_I_STATUS_DESTINATION_UNREACHABLE != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
format!(
"RTIO destination unreachable, input, on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIODestinationUnreachable",
"RTIO destination unreachable, input, on channel {0}",
channel as i64, 0, 0);
}
TRANSACTION_BUFFER.reply_data.get()
}
}
pub extern "C" fn input_timestamped_data(timeout: i64, channel: i32) -> TimestampedData {
pub extern fn input_timestamped_data(timeout: i64, channel: i32) -> TimestampedData {
unsafe {
TRANSACTION_BUFFER.reply_status.set(0);
@ -292,35 +243,19 @@ pub extern "C" fn input_timestamped_data(timeout: i64, channel: i32) -> Timestam
loop {
status = TRANSACTION_BUFFER.reply_status.get();
if status != 0 {
break;
break
}
}
if status & RTIO_I_STATUS_OVERFLOW != 0 {
artiq_raise!(
"RTIOOverflow",
format!(
"RTIO input overflow on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIOOverflow",
"RTIO input overflow on channel {0}",
channel as i64, 0, 0);
}
if status & RTIO_I_STATUS_DESTINATION_UNREACHABLE != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
format!(
"RTIO destination unreachable, input, on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIODestinationUnreachable",
"RTIO destination unreachable, input, on channel {0}",
channel as i64, 0, 0);
}
TimestampedData {

284
src/runtime/src/rtio_clocking.rs
View File

@ -1,15 +1,14 @@
use log::{info, warn, error};
use libboard_zynq::timer::GlobalTimer;
use embedded_hal::blocking::delay::DelayMs;
use libconfig::Config;
use libboard_artiq::pl;
#[cfg(has_si5324)]
use libboard_artiq::si5324;
#[cfg(has_si5324)]
use libboard_zynq::i2c::I2c;
use libboard_zynq::timer::GlobalTimer;
use libconfig::Config;
use log::{info, warn};
#[cfg(has_si5324)]
use crate::i2c;
#[cfg(has_si5324)]
use libboard_artiq::si5324;
#[derive(Debug, PartialEq, Copy, Clone)]
#[allow(non_camel_case_types)]
@ -20,7 +19,6 @@ pub enum RtioClock {
Int_150,
Ext0_Bypass,
Ext0_Synth0_10to125,
Ext0_Synth0_80to125,
Ext0_Synth0_100to125,
Ext0_Synth0_125to125,
}
@ -37,24 +35,24 @@ fn get_rtio_clock_cfg(cfg: &Config) -> RtioClock {
"ext0_bypass_125" => RtioClock::Ext0_Bypass,
"ext0_bypass_100" => RtioClock::Ext0_Bypass,
"ext0_synth0_10to125" => RtioClock::Ext0_Synth0_10to125,
"ext0_synth0_80to125" => RtioClock::Ext0_Synth0_80to125,
"ext0_synth0_100to125" => RtioClock::Ext0_Synth0_100to125,
"ext0_synth0_125to125" => RtioClock::Ext0_Synth0_125to125,
_ => {
_ => {
warn!("Unrecognised rtio_clock setting. Falling back to default.");
RtioClock::Default
RtioClock::Default
}
};
} else {
}
else {
warn!("error reading configuration. Falling back to default.");
}
if res == RtioClock::Default {
#[cfg(rtio_frequency = "100.0")]
#[cfg(rtio_frequency="100.0")]
{
warn!("Using default configuration - internal 100MHz RTIO clock.");
return RtioClock::Int_100;
}
#[cfg(rtio_frequency = "125.0")]
#[cfg(rtio_frequency="125.0")]
{
warn!("Using default configuration - internal 125MHz RTIO clock.");
return RtioClock::Int_125;
@ -68,190 +66,168 @@ fn get_rtio_clock_cfg(cfg: &Config) -> RtioClock {
res
}
#[cfg(not(has_drtio))]
fn init_rtio(timer: &mut GlobalTimer) {
info!("Switching SYS clocks...");
unsafe {
pl::csr::sys_crg::clock_switch_write(1);
}
// if it's not locked, it will hang at the CSR.
timer.delay_ms(50); // wait for CPLL/QPLL/SYS PLL lock
let clk = unsafe { pl::csr::sys_crg::current_clock_read() };
if clk == 1 {
info!("SYS CLK switched successfully");
} else {
panic!("SYS CLK did not switch");
fn init_rtio(timer: &mut GlobalTimer, _clk: RtioClock) {
#[cfg(has_rtio_crg_clock_sel)]
let clock_sel = match _clk {
RtioClock::Ext0_Bypass => {
info!("Using bypassed external clock");
1
},
RtioClock::Int_125 => {
info!("Using internal RTIO clock");
0
},
_ => {
warn!("rtio_clock setting '{:?}' is not supported. Using default internal RTIO clock instead", _clk);
0
}
};
unsafe {
pl::csr::rtio_crg::pll_reset_write(1);
#[cfg(has_rtio_crg_clock_sel)]
pl::csr::rtio_crg::clock_sel_write(clock_sel);
pl::csr::rtio_crg::pll_reset_write(0);
}
timer.delay_ms(1);
let locked = unsafe { pl::csr::rtio_crg::pll_locked_read() != 0 };
if locked {
info!("RTIO PLL locked");
} else {
error!("RTIO PLL failed to lock");
}
unsafe {
pl::csr::rtio_core::reset_phy_write(1);
}
info!("SYS PLL locked");
}
#[cfg(has_drtio)]
fn init_drtio(timer: &mut GlobalTimer) {
fn init_drtio(timer: &mut GlobalTimer)
{
unsafe {
pl::csr::gt_drtio::stable_clkin_write(1);
}
timer.delay_ms(50); // wait for CPLL/QPLL/SYS PLL lock
let clk = unsafe { pl::csr::sys_crg::current_clock_read() };
if clk == 1 {
info!("SYS CLK switched successfully");
} else {
panic!("SYS CLK did not switch");
pl::csr::drtio_transceiver::stable_clkin_write(1);
}
timer.delay_ms(2); // wait for CPLL/QPLL lock
unsafe {
pl::csr::rtio_core::reset_phy_write(1);
pl::csr::gt_drtio::txenable_write(0xffffffffu32 as _);
pl::csr::drtio_transceiver::txenable_write(0xffffffffu32 as _);
}
}
// Si5324 input to select for locking to an external clock.
#[cfg(has_si5324)]
const SI5324_EXT_INPUT: si5324::Input = si5324::Input::Ckin1;
#[cfg(has_si5324)]
fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
let (si5324_settings, si5324_ref_input) = match clk {
RtioClock::Ext0_Synth0_10to125 => {
// 125 MHz output from 10 MHz CLKINx reference, 504 Hz BW
RtioClock::Ext0_Synth0_10to125 => { // 125 MHz output from 10 MHz CLKINx reference, 504 Hz BW
info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
(
si5324::FrequencySettings {
n1_hs: 10,
nc1_ls: 4,
n2_hs: 10,
n2_ls: 300,
n31: 6,
n32: 6,
bwsel: 4,
crystal_as_ckin2: false,
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 300,
n31 : 6,
n32 : 6,
bwsel : 4,
crystal_ref: false
},
SI5324_EXT_INPUT,
si5324::Input::Ckin1
)
}
RtioClock::Ext0_Synth0_80to125 => {
// 125 MHz output from 80 MHz CLKINx reference, 611 Hz BW
info!("using 80MHz reference to make 125MHz RTIO clock with PLL");
(
si5324::FrequencySettings {
n1_hs: 4,
nc1_ls: 10,
n2_hs: 10,
n2_ls: 250,
n31: 40,
n32: 40,
bwsel: 4,
crystal_as_ckin2: false,
},
SI5324_EXT_INPUT,
)
}
RtioClock::Ext0_Synth0_100to125 => {
// 125MHz output, from 100MHz CLKINx reference, 586 Hz loop bandwidth
},
RtioClock::Ext0_Synth0_100to125 => { // 125MHz output, from 100MHz CLKINx reference, 586 Hz loop bandwidth
info!("using 100MHz reference to make 125MHz RTIO clock with PLL");
(
si5324::FrequencySettings {
n1_hs: 10,
nc1_ls: 4,
n2_hs: 10,
n2_ls: 260,
n31: 52,
n32: 52,
bwsel: 4,
crystal_as_ckin2: false,
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 260,
n31 : 52,
n32 : 52,
bwsel : 4,
crystal_ref: false
},
SI5324_EXT_INPUT,
si5324::Input::Ckin1
)
}
RtioClock::Ext0_Synth0_125to125 => {
// 125MHz output, from 125MHz CLKINx reference, 606 Hz loop bandwidth
},
RtioClock::Ext0_Synth0_125to125 => { // 125MHz output, from 125MHz CLKINx reference, 606 Hz loop bandwidth
info!("using 125MHz reference to make 125MHz RTIO clock with PLL");
(
si5324::FrequencySettings {
n1_hs: 5,
nc1_ls: 8,
n2_hs: 7,
n2_ls: 360,
n31: 63,
n32: 63,
bwsel: 4,
crystal_as_ckin2: false,
n1_hs : 5,
nc1_ls : 8,
n2_hs : 7,
n2_ls : 360,
n31 : 63,
n32 : 63,
bwsel : 4,
crystal_ref: false
},
SI5324_EXT_INPUT,
si5324::Input::Ckin1
)
}
RtioClock::Int_150 => {
// 150MHz output, from crystal
},
RtioClock::Int_150 => { // 150MHz output, from crystal
info!("using internal 150MHz RTIO clock");
(
si5324::FrequencySettings {
n1_hs: 9,
nc1_ls: 4,
n2_hs: 10,
n2_ls: 33732,
n31: 7139,
n32: 7139,
bwsel: 3,
crystal_as_ckin2: true,
n1_hs : 9,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 33732,
n31 : 7139,
n32 : 7139,
bwsel : 3,
crystal_ref: true
},
si5324::Input::Ckin2,
si5324::Input::Ckin2
)
}
RtioClock::Int_100 => {
// 100MHz output, from crystal
},
RtioClock::Int_100 => { // 100MHz output, from crystal.
info!("using internal 100MHz RTIO clock");
(
si5324::FrequencySettings {
n1_hs: 9,
nc1_ls: 6,
n2_hs: 10,
n2_ls: 33732,
n31: 7139,
n32: 7139,
bwsel: 3,
crystal_as_ckin2: true,
n1_hs : 9,
nc1_ls : 6,
n2_hs : 10,
n2_ls : 33732,
n31 : 7139,
n32 : 7139,
bwsel : 3,
crystal_ref: true
},
si5324::Input::Ckin2,
si5324::Input::Ckin2
)
}
RtioClock::Int_125 => {
// 125MHz output, from crystal, 7 Hz
},
RtioClock::Int_125 => { // 125MHz output, from crystal, 7 Hz
info!("using internal 125MHz RTIO clock");
(
si5324::FrequencySettings {
n1_hs: 10,
nc1_ls: 4,
n2_hs: 10,
n2_ls: 19972,
n31: 4565,
n32: 4565,
bwsel: 4,
crystal_as_ckin2: true,
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 19972,
n31 : 4565,
n32 : 4565,
bwsel : 4,
crystal_ref: true
},
si5324::Input::Ckin2,
si5324::Input::Ckin2
)
}
_ => {
// same setting as Int_125, but fallback to default
warn!(
"rtio_clock setting '{:?}' is unsupported. Falling back to default internal 125MHz RTIO clock.",
clk
);
},
_ => { // same setting as Int_125, but fallback to default
warn!("rtio_clock setting '{:?}' is unsupported. Falling back to default internal 125MHz RTIO clock.", clk);
(
si5324::FrequencySettings {
n1_hs: 10,
nc1_ls: 4,
n2_hs: 10,
n2_ls: 19972,
n31: 4565,
n32: 4565,
bwsel: 4,
crystal_as_ckin2: true,
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 19972,
n31 : 4565,
n32 : 4565,
bwsel : 4,
crystal_ref: true
},
si5324::Input::Ckin2,
si5324::Input::Ckin2
)
}
};
@ -259,22 +235,20 @@ fn setup_si5324(i2c: &mut I2c, timer: &mut GlobalTimer, clk: RtioClock) {
}
pub fn init(timer: &mut GlobalTimer, cfg: &Config) {
let clk = get_rtio_clock_cfg(cfg);
#[cfg(has_si5324)]
{
let i2c = unsafe { (&mut i2c::I2C_BUS).as_mut().unwrap() };
let si5324_ext_input = si5324::Input::Ckin1;
match clk {
RtioClock::Ext0_Bypass => {
info!("bypassing the PLL for RTIO clock");
si5324::bypass(i2c, SI5324_EXT_INPUT, timer).expect("cannot bypass Si5324")
}
RtioClock::Ext0_Bypass => si5324::bypass(i2c, si5324_ext_input, timer).expect("cannot bypass Si5324"),
_ => setup_si5324(i2c, timer, clk),
}
}
#[cfg(has_drtio)]
init_drtio(timer);
#[cfg(not(has_drtio))]
init_rtio(timer);
}
init_rtio(timer, clk);
}

167
src/runtime/src/rtio_csr.rs
View File

@ -1,16 +1,17 @@
use core::ptr::{read_volatile, write_volatile};
use cslice::CSlice;
use crate::{artiq_raise, pl::csr, rtio_mgt::resolve_channel_name};
use crate::artiq_raise;
pub const RTIO_O_STATUS_WAIT: u8 = 1;
pub const RTIO_O_STATUS_UNDERFLOW: u8 = 2;
pub const RTIO_O_STATUS_DESTINATION_UNREACHABLE: u8 = 4;
pub const RTIO_I_STATUS_WAIT_EVENT: u8 = 1;
pub const RTIO_I_STATUS_OVERFLOW: u8 = 2;
pub const RTIO_I_STATUS_WAIT_STATUS: u8 = 4;
pub const RTIO_I_STATUS_DESTINATION_UNREACHABLE: u8 = 8;
use crate::pl::csr;
pub const RTIO_O_STATUS_WAIT: u8 = 1;
pub const RTIO_O_STATUS_UNDERFLOW: u8 = 2;
pub const RTIO_O_STATUS_DESTINATION_UNREACHABLE: u8 = 4;
pub const RTIO_I_STATUS_WAIT_EVENT: u8 = 1;
pub const RTIO_I_STATUS_OVERFLOW: u8 = 2;
pub const RTIO_I_STATUS_WAIT_STATUS: u8 = 4;
pub const RTIO_I_STATUS_DESTINATION_UNREACHABLE: u8 = 8;
#[repr(C)]
pub struct TimestampedData {
@ -18,30 +19,32 @@ pub struct TimestampedData {
data: i32,
}
pub extern "C" fn init() {
pub extern fn init() {
unsafe {
csr::rtio_core::reset_write(1);
}
}
pub extern "C" fn get_counter() -> i64 {
pub extern fn get_counter() -> i64 {
unsafe {
csr::rtio::counter_update_write(1);
csr::rtio::counter_read() as i64
}
}
pub extern "C" fn now_mu() -> i64 {
unsafe { csr::rtio::now_read() as i64 }
pub extern fn now_mu() -> i64 {
unsafe {
csr::rtio::now_read() as i64
}
}
pub extern "C" fn at_mu(t: i64) {
pub extern fn at_mu(t: i64) {
unsafe {
csr::rtio::now_write(t as u64);
}
}
pub extern "C" fn delay_mu(dt: i64) {
pub extern fn delay_mu(dt: i64) {
unsafe {
csr::rtio::now_write(csr::rtio::now_read() + dt as u64);
}
@ -52,13 +55,13 @@ pub extern "C" fn delay_mu(dt: i64) {
pub unsafe fn rtio_o_data_write(offset: usize, data: u32) {
write_volatile(
csr::rtio::O_DATA_ADDR.offset((csr::rtio::O_DATA_SIZE - 1 - offset) as isize),
data,
);
data);
}
#[inline(always)]
pub unsafe fn rtio_i_data_read(offset: usize) -> u32 {
read_volatile(csr::rtio::I_DATA_ADDR.offset((csr::rtio::I_DATA_SIZE - 1 - offset) as isize))
read_volatile(
csr::rtio::I_DATA_ADDR.offset((csr::rtio::I_DATA_SIZE - 1 - offset) as isize))
}
#[inline(never)]
@ -68,34 +71,18 @@ unsafe fn process_exceptional_status(channel: i32, status: u8) {
while csr::rtio::o_status_read() & RTIO_O_STATUS_WAIT != 0 {}
}
if status & RTIO_O_STATUS_UNDERFLOW != 0 {
artiq_raise!(
"RTIOUnderflow",
format!(
"RTIO underflow at {{1}} mu, channel 0x{:04x}:{}, slack {{2}} mu",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
timestamp,
timestamp - get_counter()
);
artiq_raise!("RTIOUnderflow",
"RTIO underflow at {0} mu, channel {1}, slack {2} mu",
timestamp, channel as i64, timestamp - get_counter());
}
if status & RTIO_O_STATUS_DESTINATION_UNREACHABLE != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
format!(
"RTIO destination unreachable, output, at {{0}} mu, channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
timestamp,
channel as i64,
0
);
artiq_raise!("RTIODestinationUnreachable",
"RTIO destination unreachable, output, at {0} mu, channel {1}",
timestamp, channel as i64, 0);
}
}
pub extern "C" fn output(target: i32, data: i32) {
pub extern fn output(target: i32, data: i32) {
unsafe {
csr::rtio::target_write(target as u32);
// writing target clears o_data
@ -107,7 +94,7 @@ pub extern "C" fn output(target: i32, data: i32) {
}
}
pub extern "C" fn output_wide(target: i32, data: &CSlice<i32>) {
pub extern fn output_wide(target: i32, data: &CSlice<i32>) {
unsafe {
csr::rtio::target_write(target as u32);
// writing target clears o_data
@ -121,7 +108,7 @@ pub extern "C" fn output_wide(target: i32, data: &CSlice<i32>) {
}
}
pub extern "C" fn input_timestamp(timeout: i64, channel: i32) -> i64 {
pub extern fn input_timestamp(timeout: i64, channel: i32) -> i64 {
unsafe {
csr::rtio::target_write((channel as u32) << 8);
csr::rtio::i_timeout_write(timeout as u64);
@ -132,40 +119,24 @@ pub extern "C" fn input_timestamp(timeout: i64, channel: i32) -> i64 {
}
if status & RTIO_I_STATUS_OVERFLOW != 0 {
artiq_raise!(
"RTIOOverflow",
format!(
"RTIO input overflow on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIOOverflow",
"RTIO input overflow on channel {0}",
channel as i64, 0, 0);
}
if status & RTIO_I_STATUS_WAIT_EVENT != 0 {
return -1;
return -1
}
if status & RTIO_I_STATUS_DESTINATION_UNREACHABLE != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
format!(
"RTIO destination unreachable, input, on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIODestinationUnreachable",
"RTIO destination unreachable, input, on channel {0}",
channel as i64, 0, 0);
}
csr::rtio::i_timestamp_read() as i64
}
}
pub extern "C" fn input_data(channel: i32) -> i32 {
pub extern fn input_data(channel: i32) -> i32 {
unsafe {
csr::rtio::target_write((channel as u32) << 8);
csr::rtio::i_timeout_write(0xffffffff_ffffffff);
@ -176,37 +147,21 @@ pub extern "C" fn input_data(channel: i32) -> i32 {
}
if status & RTIO_I_STATUS_OVERFLOW != 0 {
artiq_raise!(
"RTIOOverflow",
format!(
"RTIO input overflow on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIOOverflow",
"RTIO input overflow on channel {0}",
channel as i64, 0, 0);
}
if status & RTIO_I_STATUS_DESTINATION_UNREACHABLE != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
format!(
"RTIO destination unreachable, input, on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIODestinationUnreachable",
"RTIO destination unreachable, input, on channel {0}",
channel as i64, 0, 0);
}
rtio_i_data_read(0) as i32
}
}
pub extern "C" fn input_timestamped_data(timeout: i64, channel: i32) -> TimestampedData {
pub extern fn input_timestamped_data(timeout: i64, channel: i32) -> TimestampedData {
unsafe {
csr::rtio::target_write((channel as u32) << 8);
csr::rtio::i_timeout_write(timeout as u64);
@ -217,38 +172,22 @@ pub extern "C" fn input_timestamped_data(timeout: i64, channel: i32) -> Timestam
}
if status & RTIO_I_STATUS_OVERFLOW != 0 {
artiq_raise!(
"RTIOOverflow",
format!(
"RTIO input overflow on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIOOverflow",
"RTIO input overflow on channel {0}",
channel as i64, 0, 0);
}
if status & RTIO_I_STATUS_WAIT_EVENT != 0 {
return TimestampedData { timestamp: -1, data: 0 };
return TimestampedData { timestamp: -1, data: 0 }
}
if status & RTIO_I_STATUS_DESTINATION_UNREACHABLE != 0 {
artiq_raise!(
"RTIODestinationUnreachable",
format!(
"RTIO destination unreachable, input, on channel 0x{:04x}:{}",
channel,
resolve_channel_name(channel as u32)
),
channel as i64,
0,
0
);
artiq_raise!("RTIODestinationUnreachable",
"RTIO destination unreachable, input, on channel {0}",
channel as i64, 0, 0);
}
TimestampedData {
timestamp: csr::rtio::i_timestamp_read() as i64,
data: rtio_i_data_read(0) as i32,
data: rtio_i_data_read(0) as i32
}
}
}

362
src/runtime/src/rtio_dma.rs
View File

@ -1,362 +0,0 @@
use alloc::{collections::BTreeMap, rc::Rc, string::String, vec::Vec};
#[cfg(has_drtio)]
use core::mem;
#[cfg(has_drtio)]
use libasync::task;
use libboard_artiq::drtio_routing::RoutingTable;
use libboard_zynq::timer::GlobalTimer;
use libcortex_a9::{cache::dcci_slice, mutex::Mutex};
use crate::kernel::DmaRecorder;
const ALIGNMENT: usize = 16 * 8;
static DMA_RECORD_STORE: Mutex<BTreeMap<String, (u32, Vec<u8>, i64)>> = Mutex::new(BTreeMap::new());
#[cfg(has_drtio)]
pub mod remote_dma {
use libboard_zynq::time::Milliseconds;
use log::error;
use super::*;
use crate::rtio_mgt::drtio;
#[derive(Debug, PartialEq, Clone)]
pub enum RemoteState {
NotLoaded,
Loaded,
PlaybackEnded { error: u8, channel: u32, timestamp: u64 },
}
#[derive(Debug, Clone)]
struct RemoteTrace {
trace: Vec<u8>,
pub state: RemoteState,
}
impl From<Vec<u8>> for RemoteTrace {
fn from(trace: Vec<u8>) -> Self {
RemoteTrace {
trace: trace,
state: RemoteState::NotLoaded,
}
}
}
impl RemoteTrace {
pub fn get_trace(&self) -> &Vec<u8> {
&self.trace
}
}
// represents all traces for a given ID
struct TraceSet {
id: u32,
done_count: Mutex<usize>,
traces: Mutex<BTreeMap<u8, RemoteTrace>>,
}
impl TraceSet {
pub fn new(id: u32, traces: BTreeMap<u8, Vec<u8>>) -> TraceSet {
let mut trace_map: BTreeMap<u8, RemoteTrace> = BTreeMap::new();
for (destination, trace) in traces {
trace_map.insert(destination, trace.into());
}
TraceSet {
id: id,
done_count: Mutex::new(0),
traces: Mutex::new(trace_map),
}
}
pub async fn await_done(&self, timeout: Option<u64>, timer: GlobalTimer) -> Result<RemoteState, &'static str> {
let timeout_ms = Milliseconds(timeout.unwrap_or(10_000));
let limit = timer.get_time() + timeout_ms;
while (timer.get_time() < limit)
& (*(self.done_count.async_lock().await) < self.traces.async_lock().await.len())
{
task::r#yield().await;
}
if timer.get_time() >= limit {
error!("Remote DMA await done timed out");
return Err("Timed out waiting for results.");
}
let mut playback_state: RemoteState = RemoteState::PlaybackEnded {
error: 0,
channel: 0,
timestamp: 0,
};
let mut lock = self.traces.async_lock().await;
let trace_iter = lock.iter_mut();
for (_dest, trace) in trace_iter {
match trace.state {
RemoteState::PlaybackEnded {
error: e,
channel: _c,
timestamp: _ts,
} => {
if e != 0 {
playback_state = trace.state.clone();
}
}
_ => (),
}
trace.state = RemoteState::Loaded;
}
Ok(playback_state)
}
pub async fn upload_traces(
&mut self,
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &RoutingTable,
timer: GlobalTimer,
) {
let mut lock = self.traces.async_lock().await;
let trace_iter = lock.iter_mut();
for (destination, trace) in trace_iter {
match drtio::ddma_upload_trace(
aux_mutex,
routing_table,
timer,
self.id,
*destination,
trace.get_trace(),
)
.await
{
Ok(_) => trace.state = RemoteState::Loaded,
Err(e) => error!("Error adding DMA trace on destination {}: {}", destination, e),
}
}
*(self.done_count.async_lock().await) = 0;
}
pub async fn erase(&mut self, aux_mutex: &Rc<Mutex<bool>>, routing_table: &RoutingTable, timer: GlobalTimer) {
let lock = self.traces.async_lock().await;
let trace_iter = lock.keys();
for destination in trace_iter {
match drtio::ddma_send_erase(aux_mutex, routing_table, timer, self.id, *destination).await {
Ok(_) => (),
Err(e) => error!("Error adding DMA trace on destination {}: {}", destination, e),
}
}
}
pub async fn playback_done(&mut self, destination: u8, error: u8, channel: u32, timestamp: u64) {
let mut traces_locked = self.traces.async_lock().await;
let mut trace = traces_locked.get_mut(&destination).unwrap();
trace.state = RemoteState::PlaybackEnded {
error: error,
channel: channel,
timestamp: timestamp,
};
*(self.done_count.async_lock().await) += 1;
}
pub async fn playback(
&self,
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &RoutingTable,
timer: GlobalTimer,
timestamp: u64,
) {
let mut dest_list: Vec<u8> = Vec::new();
{
let lock = self.traces.async_lock().await;
let trace_iter = lock.iter();
for (dest, trace) in trace_iter {
if trace.state != RemoteState::Loaded {
error!("Destination {} not ready for DMA, state: {:?}", dest, trace.state);
continue;
}
dest_list.push(dest.clone());
}
}
// mutex lock must be dropped before sending a playback request to avoid a deadlock,
// if PlaybackStatus is sent from another satellite and the state must be updated.
for destination in dest_list {
match drtio::ddma_send_playback(aux_mutex, routing_table, timer, self.id, destination, timestamp).await
{
Ok(_) => (),
Err(e) => error!("Error during remote DMA playback: {}", e),
}
}
}
pub async fn destination_changed(
&mut self,
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &RoutingTable,
timer: GlobalTimer,
destination: u8,
up: bool,
) {
// update state of the destination, resend traces if it's up
if let Some(trace) = self.traces.async_lock().await.get_mut(&destination) {
if up {
match drtio::ddma_upload_trace(
aux_mutex,
routing_table,
timer,
self.id,
destination,
trace.get_trace(),
)
.await
{
Ok(_) => trace.state = RemoteState::Loaded,
Err(e) => error!("Error adding DMA trace on destination {}: {}", destination, e),
}
} else {
trace.state = RemoteState::NotLoaded;
}
}
}
pub async fn is_empty(&self) -> bool {
self.traces.async_lock().await.is_empty()
}
}
static mut TRACES: BTreeMap<u32, TraceSet> = BTreeMap::new();
pub fn add_traces(id: u32, traces: BTreeMap<u8, Vec<u8>>) {
unsafe { TRACES.insert(id, TraceSet::new(id, traces)) };
}
pub async fn await_done(id: u32, timeout: Option<u64>, timer: GlobalTimer) -> Result<RemoteState, &'static str> {
let trace_set = unsafe { TRACES.get_mut(&id).unwrap() };
trace_set.await_done(timeout, timer).await
}
pub async fn erase(aux_mutex: &Rc<Mutex<bool>>, routing_table: &RoutingTable, timer: GlobalTimer, id: u32) {
let trace_set = unsafe { TRACES.get_mut(&id).unwrap() };
trace_set.erase(aux_mutex, routing_table, timer).await;
unsafe {
TRACES.remove(&id);
}
}
pub async fn upload_traces(aux_mutex: &Rc<Mutex<bool>>, routing_table: &RoutingTable, timer: GlobalTimer, id: u32) {
let trace_set = unsafe { TRACES.get_mut(&id).unwrap() };
trace_set.upload_traces(aux_mutex, routing_table, timer).await;
}
pub async fn playback(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &RoutingTable,
timer: GlobalTimer,
id: u32,
timestamp: u64,
) {
let trace_set = unsafe { TRACES.get_mut(&id).unwrap() };
trace_set.playback(aux_mutex, routing_table, timer, timestamp).await;
}
pub async fn playback_done(id: u32, destination: u8, error: u8, channel: u32, timestamp: u64) {
let trace_set = unsafe { TRACES.get_mut(&id).unwrap() };
trace_set.playback_done(destination, error, channel, timestamp).await;
}
pub async fn destination_changed(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &RoutingTable,
timer: GlobalTimer,
destination: u8,
up: bool,
) {
let trace_iter = unsafe { TRACES.values_mut() };
for trace_set in trace_iter {
trace_set
.destination_changed(aux_mutex, routing_table, timer, destination, up)
.await;
}
}
pub async fn has_remote_traces(id: u32) -> bool {
let trace_set = unsafe { TRACES.get_mut(&id).unwrap() };
!(trace_set.is_empty().await)
}
}
pub async fn put_record(
_aux_mutex: &Rc<Mutex<bool>>,
_routing_table: &RoutingTable,
_timer: GlobalTimer,
mut recorder: DmaRecorder,
) -> u32 {
#[cfg(has_drtio)]
let mut remote_traces: BTreeMap<u8, Vec<u8>> = BTreeMap::new();
#[cfg(has_drtio)]
if recorder.enable_ddma {
let mut local_trace: Vec<u8> = Vec::new();
// analyze each entry and put in proper buckets, as the kernel core
// sends whole chunks, to limit comms/kernel CPU communication,
// and as only comms core has access to varios DMA buffers.
let mut ptr = 0;
recorder.buffer.push(0);
while recorder.buffer[ptr] != 0 {
// ptr + 3 = tgt >> 24 (destination)
let len = recorder.buffer[ptr] as usize;
let destination = recorder.buffer[ptr + 3];
if destination == 0 {
local_trace.extend(&recorder.buffer[ptr..ptr + len]);
} else {
if let Some(remote_trace) = remote_traces.get_mut(&destination) {
remote_trace.extend(&recorder.buffer[ptr..ptr + len]);
} else {
remote_traces.insert(destination, recorder.buffer[ptr..ptr + len].to_vec());
}
}
// and jump to the next event
ptr += len;
}
mem::swap(&mut recorder.buffer, &mut local_trace);
}
// trailing zero to indicate end of buffer
recorder.buffer.push(0);
recorder.buffer.reserve(ALIGNMENT - 1);
let original_length = recorder.buffer.len();
let padding = ALIGNMENT - recorder.buffer.as_ptr() as usize % ALIGNMENT;
let padding = if padding == ALIGNMENT { 0 } else { padding };
for _ in 0..padding {
recorder.buffer.push(0);
}
recorder.buffer.copy_within(0..original_length, padding);
dcci_slice(&recorder.buffer);
let ptr = recorder.buffer[padding..].as_ptr() as u32;
let _old_record = DMA_RECORD_STORE
.lock()
.insert(recorder.name, (ptr, recorder.buffer, recorder.duration));
#[cfg(has_drtio)]
{
if let Some((old_id, _v, _d)) = _old_record {
remote_dma::erase(_aux_mutex, _routing_table, _timer, old_id).await;
}
remote_dma::add_traces(ptr, remote_traces);
}
ptr
}
pub async fn erase(name: String, _aux_mutex: &Rc<Mutex<bool>>, _routing_table: &RoutingTable, _timer: GlobalTimer) {
let _entry = DMA_RECORD_STORE.lock().remove(&name);
#[cfg(has_drtio)]
if let Some((id, _v, _d)) = _entry {
remote_dma::erase(_aux_mutex, _routing_table, _timer, id).await;
}
}
pub async fn retrieve(name: String) -> Option<(i32, i64, bool)> {
let (ptr, _v, duration) = DMA_RECORD_STORE.lock().get(&name)?.clone();
#[cfg(has_drtio)]
let uses_ddma = remote_dma::has_remote_traces(ptr).await;
#[cfg(not(has_drtio))]
let uses_ddma = false;
Some((ptr as i32, duration, uses_ddma))
}

489
src/runtime/src/rtio_mgt.rs
View File

@ -1,35 +1,26 @@
use alloc::{collections::BTreeMap, rc::Rc, string::String};
use core::cell::RefCell;
use io::{Cursor, ProtoRead};
use libboard_artiq::{drtio_routing, pl::csr};
use alloc::rc::Rc;
use libboard_zynq::timer::GlobalTimer;
use libconfig::Config;
use libboard_artiq::{pl::csr, drtio_routing};
use libcortex_a9::mutex::Mutex;
use log::warn;
static mut RTIO_DEVICE_MAP: BTreeMap<u32, String> = BTreeMap::new();
#[cfg(has_drtio)]
pub mod drtio {
use alloc::vec::Vec;
use embedded_hal::blocking::delay::DelayMs;
use libasync::{delay, task};
use libboard_artiq::{drtioaux::Error, drtioaux_async, drtioaux_async::Packet, drtioaux_proto::DMA_TRACE_MAX_SIZE};
use libboard_zynq::time::Milliseconds;
use log::{error, info, warn};
use super::*;
use crate::{analyzer::remote_analyzer::RemoteBuffer, rtio_dma::remote_dma, ASYNC_ERROR_BUSY,
ASYNC_ERROR_COLLISION, ASYNC_ERROR_SEQUENCE_ERROR, SEEN_ASYNC_ERRORS};
use crate::{SEEN_ASYNC_ERRORS, ASYNC_ERROR_BUSY, ASYNC_ERROR_SEQUENCE_ERROR, ASYNC_ERROR_COLLISION};
use libboard_artiq::drtioaux_async;
use libboard_artiq::drtioaux_async::Packet;
use libboard_artiq::drtioaux::Error;
use log::{warn, error, info};
use embedded_hal::blocking::delay::DelayMs;
use libasync::{task, delay};
use libboard_zynq::time::Milliseconds;
pub fn startup(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &Rc<RefCell<drtio_routing::RoutingTable>>,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer,
) {
pub fn startup(aux_mutex: &Rc<Mutex<bool>>,
routing_table: &Rc<RefCell<drtio_routing::RoutingTable>>,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer) {
let aux_mutex = aux_mutex.clone();
let routing_table = routing_table.clone();
let up_destinations = up_destinations.clone();
@ -41,23 +32,8 @@ pub mod drtio {
async fn link_rx_up(linkno: u8) -> bool {
let linkno = linkno as usize;
unsafe { (csr::DRTIO[linkno].rx_up_read)() == 1 }
}
async fn process_async_packets(packet: Packet) -> Option<Packet> {
// returns None if an async packet has been consumed
match packet {
Packet::DmaPlaybackStatus {
id,
destination,
error,
channel,
timestamp,
} => {
remote_dma::playback_done(id, destination, error, channel, timestamp).await;
None
}
other => Some(other),
unsafe {
(csr::DRTIO[linkno].rx_up_read)() == 1
}
}
@ -72,18 +48,14 @@ pub mod drtio {
}
}
pub async fn aux_transact(
aux_mutex: &Mutex<bool>,
linkno: u8,
request: &Packet,
timer: GlobalTimer,
) -> Result<Packet, &'static str> {
pub async fn aux_transact(aux_mutex: &Mutex<bool>, linkno: u8, request: &Packet,
timer: GlobalTimer) -> Result<Packet, &'static str> {
if !link_rx_up(linkno).await {
return Err("link went down");
}
let _lock = aux_mutex.async_lock().await;
drtioaux_async::send(linkno, request).await.unwrap();
Ok(recv_aux_timeout(linkno, 200, timer).await?)
recv_aux_timeout(linkno, 200, timer).await
}
async fn drain_buffer(linkno: u8, draining_time: Milliseconds, timer: GlobalTimer) {
@ -100,7 +72,7 @@ pub mod drtio {
let mut count = 0;
loop {
if !link_rx_up(linkno).await {
return 0;
return 0
}
count += 1;
if count > 100 {
@ -136,23 +108,13 @@ pub mod drtio {
}
}
async fn load_routing_table(
aux_mutex: &Rc<Mutex<bool>>,
linkno: u8,
routing_table: &drtio_routing::RoutingTable,
timer: GlobalTimer,
) -> Result<(), &'static str> {
async fn load_routing_table(aux_mutex: &Rc<Mutex<bool>>, linkno: u8, routing_table: &drtio_routing::RoutingTable,
timer: GlobalTimer) -> Result<(), &'static str> {
for i in 0..drtio_routing::DEST_COUNT {
let reply = aux_transact(
aux_mutex,
linkno,
&Packet::RoutingSetPath {
destination: i as u8,
hops: routing_table.0[i],
},
timer,
)
.await?;
let reply = aux_transact(aux_mutex, linkno, &Packet::RoutingSetPath {
destination: i as u8,
hops: routing_table.0[i]
}, timer).await?;
if reply != Packet::RoutingAck {
return Err("unexpected reply");
}
@ -160,13 +122,10 @@ pub mod drtio {
Ok(())
}
async fn set_rank(
aux_mutex: &Rc<Mutex<bool>>,
linkno: u8,
rank: u8,
timer: GlobalTimer,
) -> Result<(), &'static str> {
let reply = aux_transact(aux_mutex, linkno, &Packet::RoutingSetRank { rank: rank }, timer).await?;
async fn set_rank(aux_mutex: &Rc<Mutex<bool>>, linkno: u8, rank: u8, timer: GlobalTimer) -> Result<(), &'static str> {
let reply = aux_transact(aux_mutex, linkno, &Packet::RoutingSetRank {
rank: rank
}, timer).await?;
if reply != Packet::RoutingAck {
return Err("unexpected reply");
}
@ -180,11 +139,8 @@ pub mod drtio {
(csr::DRTIO[linkno].force_destination_write)(1);
(csr::DRTIO[linkno].o_get_buffer_space_write)(1);
while (csr::DRTIO[linkno].o_wait_read)() == 1 {}
info!(
"[DEST#{}] buffer space is {}",
destination,
(csr::DRTIO[linkno].o_dbg_buffer_space_read)()
);
info!("[DEST#{}] buffer space is {}",
destination, (csr::DRTIO[linkno].o_dbg_buffer_space_read)());
(csr::DRTIO[linkno].force_destination_write)(0);
}
}
@ -192,13 +148,9 @@ pub mod drtio {
async fn process_unsolicited_aux(aux_mutex: &Rc<Mutex<bool>>, linkno: u8) {
let _lock = aux_mutex.async_lock().await;
match drtioaux_async::recv(linkno).await {
Ok(Some(packet)) => {
if let Some(packet) = process_async_packets(packet).await {
warn!("[LINK#{}] unsolicited aux packet: {:?}", linkno, packet);
}
}
Ok(Some(packet)) => warn!("[LINK#{}] unsolicited aux packet: {:?}", linkno, packet),
Ok(None) => (),
Err(_) => warn!("[LINK#{}] aux packet error", linkno),
Err(_) => warn!("[LINK#{}] aux packet error", linkno)
}
}
@ -223,12 +175,9 @@ pub mod drtio {
}
}
async fn destination_set_up(
routing_table: &drtio_routing::RoutingTable,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
destination: u8,
up: bool,
) {
async fn destination_set_up(routing_table: &drtio_routing::RoutingTable,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
destination: u8, up: bool) {
let mut up_destinations = up_destinations.borrow_mut();
up_destinations[destination as usize] = up;
if up {
@ -245,13 +194,10 @@ pub mod drtio {
up_destinations[destination as usize]
}
async fn destination_survey(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
up_links: &[bool],
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer,
) {
async fn destination_survey(aux_mutex: &Rc<Mutex<bool>>, routing_table: &drtio_routing::RoutingTable,
up_links: &[bool],
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer) {
for destination in 0..drtio_routing::DEST_COUNT {
let hop = routing_table.0[destination][0];
let destination = destination as u8;
@ -265,91 +211,44 @@ pub mod drtio {
let linkno = hop - 1;
if destination_up(up_destinations, destination).await {
if up_links[linkno as usize] {
loop {
let reply = aux_transact(
aux_mutex,
linkno,
&Packet::DestinationStatusRequest {
destination: destination,
},
timer,
)
.await;
match reply {
Ok(Packet::DestinationDownReply) => {
destination_set_up(routing_table, up_destinations, destination, false).await;
remote_dma::destination_changed(
aux_mutex,
routing_table,
timer,
destination,
false,
)
.await;
}
Ok(Packet::DestinationOkReply) => (),
Ok(Packet::DestinationSequenceErrorReply { channel }) => {
error!(
"[DEST#{}] RTIO sequence error involving channel 0x{:04x}:{}",
destination,
channel,
resolve_channel_name(channel as u32)
);
unsafe { SEEN_ASYNC_ERRORS |= ASYNC_ERROR_SEQUENCE_ERROR };
}
Ok(Packet::DestinationCollisionReply { channel }) => {
error!(
"[DEST#{}] RTIO collision involving channel 0x{:04x}:{}",
destination,
channel,
resolve_channel_name(channel as u32)
);
unsafe { SEEN_ASYNC_ERRORS |= ASYNC_ERROR_COLLISION };
}
Ok(Packet::DestinationBusyReply { channel }) => {
error!(
"[DEST#{}] RTIO busy error involving channel 0x{:04x}:{}",
destination,
channel,
resolve_channel_name(channel as u32)
);
unsafe { SEEN_ASYNC_ERRORS |= ASYNC_ERROR_BUSY };
}
Ok(packet) => match process_async_packets(packet).await {
Some(packet) => {
error!("[DEST#{}] received unexpected aux packet: {:?}", destination, packet)
}
None => continue,
},
Err(e) => error!("[DEST#{}] communication failed ({})", destination, e),
let reply = aux_transact(aux_mutex, linkno, &Packet::DestinationStatusRequest {
destination: destination
}, timer).await;
match reply {
Ok(Packet::DestinationDownReply) =>
destination_set_up(routing_table, up_destinations, destination, false).await,
Ok(Packet::DestinationOkReply) => (),
Ok(Packet::DestinationSequenceErrorReply { channel }) =>{
error!("[DEST#{}] RTIO sequence error involving channel 0x{:04x}", destination, channel);
unsafe { SEEN_ASYNC_ERRORS |= ASYNC_ERROR_SEQUENCE_ERROR };
}
break;
Ok(Packet::DestinationCollisionReply { channel }) =>{
error!("[DEST#{}] RTIO collision involving channel 0x{:04x}", destination, channel);
unsafe { SEEN_ASYNC_ERRORS |= ASYNC_ERROR_COLLISION };
}
Ok(Packet::DestinationBusyReply { channel }) =>{
error!("[DEST#{}] RTIO busy error involving channel 0x{:04x}", destination, channel);
unsafe { SEEN_ASYNC_ERRORS |= ASYNC_ERROR_BUSY };
}
Ok(packet) => error!("[DEST#{}] received unexpected aux packet: {:?}", destination, packet),
Err(e) => error!("[DEST#{}] communication failed ({})", destination, e)
}
} else {
destination_set_up(routing_table, up_destinations, destination, false).await;
remote_dma::destination_changed(aux_mutex, routing_table, timer, destination, false).await;
}
} else {
if up_links[linkno as usize] {
let reply = aux_transact(
aux_mutex,
linkno,
&Packet::DestinationStatusRequest {
destination: destination,
},
timer,
)
.await;
let reply = aux_transact(aux_mutex, linkno, &Packet::DestinationStatusRequest {
destination: destination
}, timer).await;
match reply {
Ok(Packet::DestinationDownReply) => (),
Ok(Packet::DestinationOkReply) => {
destination_set_up(routing_table, up_destinations, destination, true).await;
init_buffer_space(destination as u8, linkno).await;
remote_dma::destination_changed(aux_mutex, routing_table, timer, destination, true)
.await;
}
},
Ok(packet) => error!("[DEST#{}] received unexpected aux packet: {:?}", destination, packet),
Err(e) => error!("[DEST#{}] communication failed ({})", destination, e),
Err(e) => error!("[DEST#{}] communication failed ({})", destination, e)
}
}
}
@ -357,12 +256,10 @@ pub mod drtio {
}
}
pub async fn link_task(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer,
) {
pub async fn link_task(aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer) {
let mut up_links = [false; csr::DRTIO.len()];
loop {
for linkno in 0..csr::DRTIO.len() {
@ -423,259 +320,33 @@ pub mod drtio {
for linkno in 0..csr::DRTIO.len() {
let linkno = linkno as u8;
if task::block_on(link_rx_up(linkno)) {
let reply = task::block_on(aux_transact(&aux_mutex, linkno, &Packet::ResetRequest, timer));
let reply = task::block_on(aux_transact(&aux_mutex, linkno,
&Packet::ResetRequest, timer));
match reply {
Ok(Packet::ResetAck) => (),
Ok(_) => error!("[LINK#{}] reset failed, received unexpected aux packet", linkno),
Err(e) => error!("[LINK#{}] reset failed, aux packet error ({})", linkno, e),
Err(e) => error!("[LINK#{}] reset failed, aux packet error ({})", linkno, e)
}
}
}
}
pub async fn ddma_upload_trace(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
timer: GlobalTimer,
id: u32,
destination: u8,
trace: &Vec<u8>,
) -> Result<(), &'static str> {
let linkno = routing_table.0[destination as usize][0] - 1;
let mut i = 0;
while i < trace.len() {
let mut trace_slice: [u8; DMA_TRACE_MAX_SIZE] = [0; DMA_TRACE_MAX_SIZE];
let len: usize = if i + DMA_TRACE_MAX_SIZE < trace.len() {
DMA_TRACE_MAX_SIZE
} else {
trace.len() - i
} as usize;
let last = i + len == trace.len();
trace_slice[..len].clone_from_slice(&trace[i..i + len]);
i += len;
let reply = aux_transact(
aux_mutex,
linkno,
&Packet::DmaAddTraceRequest {
id: id,
destination: destination,
last: last,
length: len as u16,
trace: trace_slice,
},
timer,
)
.await;
match reply {
Ok(Packet::DmaAddTraceReply { succeeded: true }) => (),
Ok(Packet::DmaAddTraceReply { succeeded: false }) => {
return Err("error adding trace on satellite");
}
Ok(_) => {
return Err("adding DMA trace failed, unexpected aux packet");
}
Err(_) => {
return Err("adding DMA trace failed, aux error");
}
}
}
Ok(())
}
pub async fn ddma_send_erase(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
timer: GlobalTimer,
id: u32,
destination: u8,
) -> Result<(), &'static str> {
let linkno = routing_table.0[destination as usize][0] - 1;
let reply = aux_transact(
aux_mutex,
linkno,
&Packet::DmaRemoveTraceRequest {
id: id,
destination: destination,
},
timer,
)
.await;
match reply {
Ok(Packet::DmaRemoveTraceReply { succeeded: true }) => Ok(()),
Ok(Packet::DmaRemoveTraceReply { succeeded: false }) => Err("satellite DMA erase error"),
Ok(_) => Err("adding trace failed, unexpected aux packet"),
Err(_) => Err("erasing trace failed, aux error"),
}
}
pub async fn ddma_send_playback(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
timer: GlobalTimer,
id: u32,
destination: u8,
timestamp: u64,
) -> Result<(), &'static str> {
let linkno = routing_table.0[destination as usize][0] - 1;
let reply = aux_transact(
aux_mutex,
linkno,
&Packet::DmaPlaybackRequest {
id: id,
destination: destination,
timestamp: timestamp,
},
timer,
)
.await;
match reply {
Ok(Packet::DmaPlaybackReply { succeeded: true }) => Ok(()),
Ok(Packet::DmaPlaybackReply { succeeded: false }) => Err("error on DMA playback request"),
Ok(_) => Err("received unexpected aux packet during DMA playback"),
Err(_) => Err("aux error on DMA playback"),
}
}
async fn analyzer_get_data(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
timer: GlobalTimer,
destination: u8,
) -> Result<RemoteBuffer, &'static str> {
let linkno = routing_table.0[destination as usize][0] - 1;
let reply = aux_transact(
aux_mutex,
linkno,
&Packet::AnalyzerHeaderRequest {
destination: destination,
},
timer,
)
.await;
let (sent, total, overflow) = match reply {
Ok(Packet::AnalyzerHeader {
sent_bytes,
total_byte_count,
overflow_occurred,
}) => (sent_bytes, total_byte_count, overflow_occurred),
Ok(_) => return Err("received unexpected aux packet during remote analyzer header request"),
Err(e) => return Err(e),
};
let mut remote_data: Vec<u8> = Vec::new();
if sent > 0 {
let mut last_packet = false;
while !last_packet {
let reply = aux_transact(
aux_mutex,
linkno,
&Packet::AnalyzerDataRequest {
destination: destination,
},
timer,
)
.await;
match reply {
Ok(Packet::AnalyzerData { last, length, data }) => {
last_packet = last;
remote_data.extend(&data[0..length as usize]);
}
Ok(_) => return Err("received unexpected aux packet during remote analyzer data request"),
Err(e) => return Err(e),
}
}
}
Ok(RemoteBuffer {
sent_bytes: sent,
total_byte_count: total,
error: overflow,
data: remote_data,
})
}
pub async fn analyzer_query(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &drtio_routing::RoutingTable,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer,
) -> Result<Vec<RemoteBuffer>, &'static str> {
let mut remote_buffers: Vec<RemoteBuffer> = Vec::new();
for i in 1..drtio_routing::DEST_COUNT {
if destination_up(up_destinations, i as u8).await {
remote_buffers.push(analyzer_get_data(aux_mutex, routing_table, timer, i as u8).await?);
}
}
Ok(remote_buffers)
}
}
fn read_device_map(cfg: &Config) -> BTreeMap<u32, String> {
let mut device_map: BTreeMap<u32, String> = BTreeMap::new();
let _ = cfg
.read("device_map")
.and_then(|raw_bytes| {
let mut bytes_cr = Cursor::new(raw_bytes);
let size = bytes_cr.read_u32().unwrap();
for _ in 0..size {
let channel = bytes_cr.read_u32().unwrap();
let device_name = bytes_cr.read_string().unwrap();
if let Some(old_entry) = device_map.insert(channel, device_name.clone()) {
warn!(
"conflicting device map entries for RTIO channel {}: '{}' and '{}'",
channel, old_entry, device_name
);
}
}
Ok(())
})
.or_else(|err| {
warn!(
"error reading device map ({}), device names will not be available in RTIO error messages",
err
);
Err(err)
});
device_map
}
fn _resolve_channel_name(channel: u32, device_map: &BTreeMap<u32, String>) -> String {
match device_map.get(&channel) {
Some(val) => val.clone(),
None => String::from("unknown"),
}
}
pub fn resolve_channel_name(channel: u32) -> String {
_resolve_channel_name(channel, unsafe { &RTIO_DEVICE_MAP })
}
#[cfg(not(has_drtio))]
pub mod drtio {
use super::*;
pub fn startup(
_aux_mutex: &Rc<Mutex<bool>>,
_routing_table: &Rc<RefCell<drtio_routing::RoutingTable>>,
_up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
_timer: GlobalTimer,
) {
}
pub fn startup(_aux_mutex: &Rc<Mutex<bool>>, _routing_table: &Rc<RefCell<drtio_routing::RoutingTable>>,
_up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>, _timer: GlobalTimer) {}
#[allow(dead_code)]
pub fn reset(_aux_mutex: Rc<Mutex<bool>>, mut _timer: GlobalTimer) {}
}
pub fn startup(
aux_mutex: &Rc<Mutex<bool>>,
routing_table: &Rc<RefCell<drtio_routing::RoutingTable>>,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer,
cfg: &Config,
) {
unsafe {
RTIO_DEVICE_MAP = read_device_map(cfg);
}
pub fn startup(aux_mutex: &Rc<Mutex<bool>>,
routing_table: &Rc<RefCell<drtio_routing::RoutingTable>>,
up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
timer: GlobalTimer) {
drtio::startup(aux_mutex, routing_table, up_destinations, timer);
unsafe {
csr::rtio_core::reset_phy_write(1);

68
src/rustfmt.toml
View File

@ -1,68 +0,0 @@
max_width = 120
hard_tabs = false
tab_spaces = 4
newline_style = "Auto"
use_small_heuristics = "Default"
indent_style = "Block"
wrap_comments = false
format_code_in_doc_comments = false
comment_width = 100
normalize_comments = false
normalize_doc_attributes = false
license_template_path = ""
format_strings = true
format_macro_matchers = true
format_macro_bodies = true
empty_item_single_line = true
struct_lit_single_line = true
fn_single_line = false
where_single_line = true
imports_indent = "Visual"
imports_layout = "Mixed"
merge_imports = true
group_imports = "StdExternalCrate"
reorder_imports = true
reorder_modules = true
reorder_impl_items = false
type_punctuation_density = "Wide"
space_before_colon = false
space_after_colon = true
spaces_around_ranges = false
binop_separator = "Front"
remove_nested_parens = true
combine_control_expr = true
overflow_delimited_expr = false
struct_field_align_threshold = 0
enum_discrim_align_threshold = 0
match_arm_blocks = true
match_arm_leading_pipes = "Never"
force_multiline_blocks = false
fn_args_layout = "Tall"
brace_style = "SameLineWhere"
control_brace_style = "AlwaysSameLine"
trailing_semicolon = true
trailing_comma = "Vertical"
match_block_trailing_comma = false
blank_lines_upper_bound = 1
blank_lines_lower_bound = 0
edition = "2018"
version = "Two"
inline_attribute_width = 0
merge_derives = true
use_try_shorthand = false
use_field_init_shorthand = false
force_explicit_abi = true
condense_wildcard_suffixes = false
color = "Auto"
required_version = "1.4.32"
unstable_features = false
disable_all_formatting = false
skip_children = false
hide_parse_errors = false
error_on_line_overflow = false
error_on_unformatted = false
report_todo = "Never"
report_fixme = "Never"
ignore = []
emit_mode = "Files"
make_backup = false

126
src/satman/src/analyzer.rs
View File

@ -1,126 +0,0 @@
use core::cmp::min;
use libboard_artiq::{drtioaux_proto::ANALYZER_MAX_SIZE, pl::csr};
use libcortex_a9::cache;
const BUFFER_SIZE: usize = 512 * 1024;
#[repr(align(64))]
struct Buffer {
data: [u8; BUFFER_SIZE],
}
static mut BUFFER: Buffer = Buffer { data: [0; BUFFER_SIZE] };
fn arm() {
unsafe {
let base_addr = &mut BUFFER.data[0] as *mut _ as usize;
let last_addr = &mut BUFFER.data[BUFFER_SIZE - 1] as *mut _ as usize;
csr::rtio_analyzer::dma_base_address_write(base_addr as u32);
csr::rtio_analyzer::message_encoder_overflow_reset_write(1);
csr::rtio_analyzer::dma_last_address_write(last_addr as u32);
csr::rtio_analyzer::dma_reset_write(1);
csr::rtio_analyzer::enable_write(1);
}
}
fn disarm() {
unsafe {
csr::rtio_analyzer::enable_write(0);
while csr::rtio_analyzer::busy_read() != 0 {}
cache::dcci_slice(&BUFFER.data);
}
}
pub struct Analyzer {
// necessary for keeping track of sent data
data_len: usize,
sent_bytes: usize,
data_pointer: usize,
}
pub struct Header {
pub total_byte_count: u64,
pub sent_bytes: u32,
pub error: bool,
}
pub struct AnalyzerSliceMeta {
pub len: u16,
pub last: bool,
}
impl Drop for Analyzer {
fn drop(&mut self) {
disarm();
}
}
impl Analyzer {
pub fn new() -> Analyzer {
// create and arm new Analyzer
arm();
Analyzer {
data_len: 0,
sent_bytes: 0,
data_pointer: 0,
}
}
pub fn get_header(&mut self) -> Header {
disarm();
let overflow = unsafe { csr::rtio_analyzer::message_encoder_overflow_read() != 0 };
let bus_err = unsafe { csr::rtio_analyzer::dma_bus_error_read() != 0 };
let total_byte_count = unsafe { csr::rtio_analyzer::dma_byte_count_read() as u64 };
let wraparound = total_byte_count >= BUFFER_SIZE as u64;
self.data_len = if wraparound {
BUFFER_SIZE
} else {
total_byte_count as usize
};
self.data_pointer = if wraparound {
(total_byte_count % BUFFER_SIZE as u64) as usize
} else {
0
};
self.sent_bytes = 0;
if overflow {
warn!("overflow occured");
}
if bus_err {
warn!("bus error occured");
}
Header {
total_byte_count: total_byte_count,
sent_bytes: self.data_len as u32,
error: overflow | bus_err,
}
}
pub fn get_data(&mut self, data_slice: &mut [u8; ANALYZER_MAX_SIZE]) -> AnalyzerSliceMeta {
let data = unsafe { &BUFFER.data[..] };
let i = (self.data_pointer + self.sent_bytes) % BUFFER_SIZE;
let len = min(ANALYZER_MAX_SIZE, self.data_len - self.sent_bytes);
let last = self.sent_bytes + len == self.data_len;
if i + len >= BUFFER_SIZE {
data_slice[..(BUFFER_SIZE - i)].clone_from_slice(&data[i..BUFFER_SIZE]);
data_slice[(BUFFER_SIZE - i)..len].clone_from_slice(&data[..(i + len) % BUFFER_SIZE]);
} else {
data_slice[..len].clone_from_slice(&data[i..i + len]);
}
self.sent_bytes += len;
if last {
arm();
}
AnalyzerSliceMeta {
len: len as u16,
last: last,
}
}
}

173
src/satman/src/dma.rs
View File

@ -1,173 +0,0 @@
use alloc::{collections::btree_map::BTreeMap, vec::Vec};
use libboard_artiq::pl::csr;
use libcortex_a9::cache::dcci_slice;
const ALIGNMENT: usize = 64;
#[derive(Debug, PartialEq)]
enum ManagerState {
Idle,
Playback,
}
pub struct RtioStatus {
pub id: u32,
pub error: u8,
pub channel: u32,
pub timestamp: u64,
}
pub enum Error {
IdNotFound,
PlaybackInProgress,
EntryNotComplete,
}
#[derive(Debug)]
struct Entry {
trace: Vec<u8>,
padding_len: usize,
complete: bool,
}
#[derive(Debug)]
pub struct Manager {
entries: BTreeMap<u32, Entry>,
state: ManagerState,
currentid: u32,
}
impl Manager {
pub fn new() -> Manager {
// in case Manager is created during a DMA in progress
// wait for it to end
unsafe { while csr::rtio_dma::enable_read() != 0 {} }
Manager {
entries: BTreeMap::new(),
currentid: 0,
state: ManagerState::Idle,
}
}
pub fn add(&mut self, id: u32, last: bool, trace: &[u8], trace_len: usize) -> Result<(), Error> {
let entry = match self.entries.get_mut(&id) {
Some(entry) => {
if entry.complete {
// replace entry
self.entries.remove(&id);
self.entries.insert(
id,
Entry {
trace: Vec::new(),
padding_len: 0,
complete: false,
},
);
self.entries.get_mut(&id).unwrap()
} else {
entry
}
}
None => {
self.entries.insert(
id,
Entry {
trace: Vec::new(),
padding_len: 0,
complete: false,
},
);
self.entries.get_mut(&id).unwrap()
}
};
entry.trace.extend(&trace[0..trace_len]);
if last {
entry.trace.push(0);
let data_len = entry.trace.len();
// Realign.
entry.trace.reserve(ALIGNMENT - 1);
let padding = ALIGNMENT - entry.trace.as_ptr() as usize % ALIGNMENT;
let padding = if padding == ALIGNMENT { 0 } else { padding };
for _ in 0..padding {
// Vec guarantees that this will not reallocate
entry.trace.push(0)
}
for i in 1..data_len + 1 {
entry.trace[data_len + padding - i] = entry.trace[data_len - i]
}
entry.complete = true;
entry.padding_len = padding;
dcci_slice(&entry.trace);
}
Ok(())
}
pub fn erase(&mut self, id: u32) -> Result<(), Error> {
match self.entries.remove(&id) {
Some(_) => Ok(()),
None => Err(Error::IdNotFound),
}
}
pub fn playback(&mut self, id: u32, timestamp: u64) -> Result<(), Error> {
if self.state != ManagerState::Idle {
return Err(Error::PlaybackInProgress);
}
let entry = match self.entries.get(&id) {
Some(entry) => entry,
None => {
return Err(Error::IdNotFound);
}
};
if !entry.complete {
return Err(Error::EntryNotComplete);
}
let ptr = entry.trace[entry.padding_len..].as_ptr();
assert!(ptr as u32 % 64 == 0);
self.state = ManagerState::Playback;
self.currentid = id;
unsafe {
csr::rtio_dma::base_address_write(ptr as u32);
csr::rtio_dma::time_offset_write(timestamp as u64);
csr::cri_con::selected_write(1);
csr::rtio_dma::enable_write(1);
// playback has begun here, for status call check_state
}
Ok(())
}
pub fn check_state(&mut self) -> Option<RtioStatus> {
if self.state != ManagerState::Playback {
// nothing to report
return None;
}
let dma_enable = unsafe { csr::rtio_dma::enable_read() };
if dma_enable != 0 {
return None;
} else {
self.state = ManagerState::Idle;
unsafe {
csr::cri_con::selected_write(0);
let error = csr::rtio_dma::error_read();
let channel = csr::rtio_dma::error_channel_read();
let timestamp = csr::rtio_dma::error_timestamp_read();
if error != 0 {
csr::rtio_dma::error_write(1);
}
return Some(RtioStatus {
id: self.currentid,
error: error,
channel: channel,
timestamp: timestamp,
});
}
}
}
}

539
src/satman/src/main.rs
View File

@ -8,39 +8,29 @@ extern crate log;
extern crate embedded_hal;
extern crate libboard_artiq;
extern crate libboard_zynq;
extern crate libboard_artiq;
extern crate libsupport_zynq;
extern crate libcortex_a9;
extern crate libregister;
extern crate libsupport_zynq;
extern crate unwind;
extern crate alloc;
use core::sync::atomic::{AtomicBool, Ordering};
use analyzer::Analyzer;
use dma::Manager as DmaManager;
use embedded_hal::blocking::delay::DelayUs;
#[cfg(feature = "target_kasli_soc")]
use libboard_artiq::io_expander;
use libboard_zynq::{i2c::I2c, timer::GlobalTimer, time::Milliseconds, print, println, mpcore, gic, stdio};
use libsupport_zynq::ram;
#[cfg(has_si5324)]
use libboard_artiq::si5324;
use libboard_artiq::{drtio_routing, drtioaux, drtioaux_proto::ANALYZER_MAX_SIZE, identifier_read, logger, pl::csr};
#[cfg(feature = "target_kasli_soc")]
use libboard_zynq::error_led::ErrorLED;
use libboard_zynq::{gic, i2c::I2c, mpcore, print, println, stdio, time::Milliseconds, timer::GlobalTimer};
use libcortex_a9::{asm, interrupt_handler,
l2c::enable_l2_cache,
notify_spin_lock,
regs::{MPIDR, SP},
spin_lock_yield};
use libregister::{RegisterR, RegisterW};
use libsupport_zynq::ram;
use libboard_artiq::io_expander;
use libboard_artiq::{pl::csr, drtio_routing, drtioaux, logger, identifier_read, init_gateware};
use libcortex_a9::{spin_lock_yield, interrupt_handler, regs::{MPIDR, SP}, notify_spin_lock, asm, l2c::enable_l2_cache};
use libregister::{RegisterW, RegisterR};
use embedded_hal::blocking::delay::DelayUs;
use core::sync::atomic::{AtomicBool, Ordering};
mod analyzer;
mod dma;
mod repeater;
fn drtiosat_reset(reset: bool) {
@ -56,7 +46,9 @@ fn drtiosat_reset_phy(reset: bool) {
}
fn drtiosat_link_rx_up() -> bool {
unsafe { csr::drtiosat::rx_up_read() == 1 }
unsafe {
csr::drtiosat::rx_up_read() == 1
}
}
fn drtiosat_tsc_loaded() -> bool {
@ -69,6 +61,7 @@ fn drtiosat_tsc_loaded() -> bool {
}
}
#[cfg(has_drtio_routing)]
macro_rules! forward {
($routing_table:expr, $destination:expr, $rank:expr, $repeaters:expr, $packet:expr, $timer:expr) => {{
@ -81,28 +74,22 @@ macro_rules! forward {
return Err(drtioaux::Error::RoutingError);
}
}
}};
}}
}
#[cfg(not(has_drtio_routing))]
macro_rules! forward {
($routing_table:expr, $destination:expr, $rank:expr, $repeaters:expr, $packet:expr, $timer:expr) => {};
($routing_table:expr, $destination:expr, $rank:expr, $repeaters:expr, $packet:expr, $timer:expr) => {}
}
fn process_aux_packet(
_repeaters: &mut [repeater::Repeater],
_routing_table: &mut drtio_routing::RoutingTable,
_rank: &mut u8,
packet: drtioaux::Packet,
timer: &mut GlobalTimer,
i2c: &mut I2c,
dma_manager: &mut DmaManager,
analyzer: &mut Analyzer,
) -> Result<(), drtioaux::Error> {
fn process_aux_packet(_repeaters: &mut [repeater::Repeater],
_routing_table: &mut drtio_routing::RoutingTable, _rank: &mut u8,
packet: drtioaux::Packet, timer: &mut GlobalTimer, i2c: &mut I2c) -> Result<(), drtioaux::Error> {
// In the code below, *_chan_sel_write takes an u8 if there are fewer than 256 channels,
// and u16 otherwise; hence the `as _` conversion.
match packet {
drtioaux::Packet::EchoRequest => drtioaux::send(0, &drtioaux::Packet::EchoReply),
drtioaux::Packet::EchoRequest =>
drtioaux::send(0, &drtioaux::Packet::EchoReply),
drtioaux::Packet::ResetRequest => {
info!("resetting RTIO");
drtiosat_reset(true);
@ -114,61 +101,46 @@ fn process_aux_packet(
}
}
drtioaux::send(0, &drtioaux::Packet::ResetAck)
}
},
drtioaux::Packet::DestinationStatusRequest {
destination: _destination,
} => {
drtioaux::Packet::DestinationStatusRequest { destination: _destination } => {
#[cfg(has_drtio_routing)]
let hop = _routing_table.0[_destination as usize][*_rank as usize];
#[cfg(not(has_drtio_routing))]
let hop = 0;
if hop == 0 {
if let Some(status) = dma_manager.check_state() {
info!(
"playback done, error: {}, channel: {}, timestamp: {}",
status.error, status.channel, status.timestamp
);
drtioaux::send(
0,
&drtioaux::Packet::DmaPlaybackStatus {
destination: _destination,
id: status.id,
error: status.error,
channel: status.channel,
timestamp: status.timestamp,
},
)?;
} else {
let errors;
let errors;
unsafe {
errors = csr::drtiosat::rtio_error_read();
}
if errors & 1 != 0 {
let channel;
unsafe {
errors = csr::drtiosat::rtio_error_read();
channel = csr::drtiosat::sequence_error_channel_read();
csr::drtiosat::rtio_error_write(1);
}
if errors & 1 != 0 {
let channel;
unsafe {
channel = csr::drtiosat::sequence_error_channel_read();
csr::drtiosat::rtio_error_write(1);
}
drtioaux::send(0, &drtioaux::Packet::DestinationSequenceErrorReply { channel })?;
} else if errors & 2 != 0 {
let channel;
unsafe {
channel = csr::drtiosat::collision_channel_read();
csr::drtiosat::rtio_error_write(2);
}
drtioaux::send(0, &drtioaux::Packet::DestinationCollisionReply { channel })?;
} else if errors & 4 != 0 {
let channel;
unsafe {
channel = csr::drtiosat::busy_channel_read();
csr::drtiosat::rtio_error_write(4);
}
drtioaux::send(0, &drtioaux::Packet::DestinationBusyReply { channel })?;
} else {
drtioaux::send(0, &drtioaux::Packet::DestinationOkReply)?;
drtioaux::send(0,
&drtioaux::Packet::DestinationSequenceErrorReply { channel })?;
} else if errors & 2 != 0 {
let channel;
unsafe {
channel = csr::drtiosat::collision_channel_read();
csr::drtiosat::rtio_error_write(2);
}
drtioaux::send(0,
&drtioaux::Packet::DestinationCollisionReply { channel })?;
} else if errors & 4 != 0 {
let channel;
unsafe {
channel = csr::drtiosat::busy_channel_read();
csr::drtiosat::rtio_error_write(4);
}
drtioaux::send(0,
&drtioaux::Packet::DestinationBusyReply { channel })?;
}
else {
drtioaux::send(0, &drtioaux::Packet::DestinationOkReply)?;
}
}
@ -178,20 +150,15 @@ fn process_aux_packet(
let hop = hop as usize;
if hop <= csr::DRTIOREP.len() {
let repno = hop - 1;
match _repeaters[repno].aux_forward(
&drtioaux::Packet::DestinationStatusRequest {
destination: _destination,
},
timer,
) {
match _repeaters[repno].aux_forward(&drtioaux::Packet::DestinationStatusRequest {
destination: _destination
}, timer) {
Ok(()) => (),
Err(drtioaux::Error::LinkDown) => {
drtioaux::send(0, &drtioaux::Packet::DestinationDownReply)?
}
Err(drtioaux::Error::LinkDown) => drtioaux::send(0, &drtioaux::Packet::DestinationDownReply)?,
Err(e) => {
drtioaux::send(0, &drtioaux::Packet::DestinationDownReply)?;
error!("aux error when handling destination status request: {:?}", e);
}
},
}
} else {
drtioaux::send(0, &drtioaux::Packet::DestinationDownReply)?;
@ -231,18 +198,15 @@ fn process_aux_packet(
}
#[cfg(not(has_drtio_routing))]
drtioaux::Packet::RoutingSetPath {
destination: _,
hops: _,
} => drtioaux::send(0, &drtioaux::Packet::RoutingAck),
drtioaux::Packet::RoutingSetPath { destination: _, hops: _ } => {
drtioaux::send(0, &drtioaux::Packet::RoutingAck)
}
#[cfg(not(has_drtio_routing))]
drtioaux::Packet::RoutingSetRank { rank: _ } => drtioaux::send(0, &drtioaux::Packet::RoutingAck),
drtioaux::Packet::RoutingSetRank { rank: _ } => {
drtioaux::send(0, &drtioaux::Packet::RoutingAck)
}
drtioaux::Packet::MonitorRequest {
destination: _destination,
channel,
probe,
} => {
drtioaux::Packet::MonitorRequest { destination: _destination, channel, probe } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let value;
#[cfg(has_rtio_moninj)]
@ -258,13 +222,9 @@ fn process_aux_packet(
}
let reply = drtioaux::Packet::MonitorReply { value: value };
drtioaux::send(0, &reply)
}
drtioaux::Packet::InjectionRequest {
destination: _destination,
channel,
overrd,
value,
} => {
},
drtioaux::Packet::InjectionRequest { destination: _destination, channel,
overrd, value } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
#[cfg(has_rtio_moninj)]
unsafe {
@ -273,12 +233,9 @@ fn process_aux_packet(
csr::rtio_moninj::inj_value_write(value);
}
Ok(())
}
drtioaux::Packet::InjectionStatusRequest {
destination: _destination,
channel,
overrd,
} => {
},
drtioaux::Packet::InjectionStatusRequest { destination: _destination,
channel, overrd } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let value;
#[cfg(has_rtio_moninj)]
@ -292,87 +249,44 @@ fn process_aux_packet(
value = 0;
}
drtioaux::send(0, &drtioaux::Packet::InjectionStatusReply { value: value })
}
},
drtioaux::Packet::I2cStartRequest {
destination: _destination,
busno: _busno,
} => {
drtioaux::Packet::I2cStartRequest { destination: _destination, busno: _busno } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let succeeded = i2c.start().is_ok();
drtioaux::send(0, &drtioaux::Packet::I2cBasicReply { succeeded: succeeded })
}
drtioaux::Packet::I2cRestartRequest {
destination: _destination,
busno: _busno,
} => {
drtioaux::Packet::I2cRestartRequest { destination: _destination, busno: _busno } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let succeeded = i2c.restart().is_ok();
drtioaux::send(0, &drtioaux::Packet::I2cBasicReply { succeeded: succeeded })
}
drtioaux::Packet::I2cStopRequest {
destination: _destination,
busno: _busno,
} => {
drtioaux::Packet::I2cStopRequest { destination: _destination, busno: _busno } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let succeeded = i2c.stop().is_ok();
drtioaux::send(0, &drtioaux::Packet::I2cBasicReply { succeeded: succeeded })
}
drtioaux::Packet::I2cWriteRequest {
destination: _destination,
busno: _busno,
data,
} => {
drtioaux::Packet::I2cWriteRequest { destination: _destination, busno: _busno, data } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
match i2c.write(data) {
Ok(ack) => drtioaux::send(
0,
&drtioaux::Packet::I2cWriteReply {
succeeded: true,
ack: ack,
},
),
Err(_) => drtioaux::send(
0,
&drtioaux::Packet::I2cWriteReply {
succeeded: false,
ack: false,
},
),
Ok(ack) => drtioaux::send(0,
&drtioaux::Packet::I2cWriteReply { succeeded: true, ack: ack }),
Err(_) => drtioaux::send(0,
&drtioaux::Packet::I2cWriteReply { succeeded: false, ack: false })
}
}
drtioaux::Packet::I2cReadRequest {
destination: _destination,
busno: _busno,
ack,
} => {
drtioaux::Packet::I2cReadRequest { destination: _destination, busno: _busno, ack } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
match i2c.read(ack) {
Ok(data) => drtioaux::send(
0,
&drtioaux::Packet::I2cReadReply {
succeeded: true,
data: data,
},
),
Err(_) => drtioaux::send(
0,
&drtioaux::Packet::I2cReadReply {
succeeded: false,
data: 0xff,
},
),
Ok(data) => drtioaux::send(0,
&drtioaux::Packet::I2cReadReply { succeeded: true, data: data }),
Err(_) => drtioaux::send(0,
&drtioaux::Packet::I2cReadReply { succeeded: false, data: 0xff })
}
}
drtioaux::Packet::I2cSwitchSelectRequest {
destination: _destination,
busno: _busno,
address,
mask,
} => {
drtioaux::Packet::I2cSwitchSelectRequest { destination: _destination, busno: _busno, address, mask } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let ch = match mask {
//decode from mainline, PCA9548-centric API
let ch = match mask { //decode from mainline, PCA9548-centric API
0x00 => None,
0x01 => Some(0),
0x02 => Some(1),
@ -382,39 +296,28 @@ fn process_aux_packet(
0x20 => Some(5),
0x40 => Some(6),
0x80 => Some(7),
_ => return drtioaux::send(0, &drtioaux::Packet::I2cBasicReply { succeeded: false }),
_ => { return drtioaux::send(0, &drtioaux::Packet::I2cBasicReply { succeeded: false }); }
};
let succeeded = i2c.pca954x_select(address, ch).is_ok();
drtioaux::send(0, &drtioaux::Packet::I2cBasicReply { succeeded: succeeded })
}
drtioaux::Packet::SpiSetConfigRequest {
destination: _destination,
busno: _busno,
flags: _flags,
length: _length,
div: _div,
cs: _cs,
} => {
drtioaux::Packet::SpiSetConfigRequest { destination: _destination, busno: _busno,
flags: _flags, length: _length, div: _div, cs: _cs } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
// todo: reimplement when/if SPI is available
//let succeeded = spi::set_config(busno, flags, length, div, cs).is_ok();
drtioaux::send(0, &drtioaux::Packet::SpiBasicReply { succeeded: false })
}
drtioaux::Packet::SpiWriteRequest {
destination: _destination,
busno: _busno,
data: _data,
} => {
drtioaux::send(0,
&drtioaux::Packet::SpiBasicReply { succeeded: false })
},
drtioaux::Packet::SpiWriteRequest { destination: _destination, busno: _busno, data: _data } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
// todo: reimplement when/if SPI is available
//let succeeded = spi::write(busno, data).is_ok();
drtioaux::send(0, &drtioaux::Packet::SpiBasicReply { succeeded: false })
drtioaux::send(0,
&drtioaux::Packet::SpiBasicReply { succeeded: false })
}
drtioaux::Packet::SpiReadRequest {
destination: _destination,
busno: _busno,
} => {
drtioaux::Packet::SpiReadRequest { destination: _destination, busno: _busno } => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
// todo: reimplement when/if SPI is available
// match spi::read(busno) {
@ -423,72 +326,8 @@ fn process_aux_packet(
// Err(_) => drtioaux::send(0,
// &drtioaux::Packet::SpiReadReply { succeeded: false, data: 0 })
// }
drtioaux::send(
0,
&drtioaux::Packet::SpiReadReply {
succeeded: false,
data: 0,
},
)
}
drtioaux::Packet::AnalyzerHeaderRequest {
destination: _destination,
} => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let header = analyzer.get_header();
drtioaux::send(
0,
&drtioaux::Packet::AnalyzerHeader {
total_byte_count: header.total_byte_count,
sent_bytes: header.sent_bytes,
overflow_occurred: header.error,
},
)
}
drtioaux::Packet::AnalyzerDataRequest {
destination: _destination,
} => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let mut data_slice: [u8; ANALYZER_MAX_SIZE] = [0; ANALYZER_MAX_SIZE];
let meta = analyzer.get_data(&mut data_slice);
drtioaux::send(
0,
&drtioaux::Packet::AnalyzerData {
last: meta.last,
length: meta.len,
data: data_slice,
},
)
}
drtioaux::Packet::DmaAddTraceRequest {
destination: _destination,
id,
last,
length,
trace,
} => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let succeeded = dma_manager.add(id, last, &trace, length as usize).is_ok();
drtioaux::send(0, &drtioaux::Packet::DmaAddTraceReply { succeeded: succeeded })
}
drtioaux::Packet::DmaRemoveTraceRequest {
destination: _destination,
id,
} => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let succeeded = dma_manager.erase(id).is_ok();
drtioaux::send(0, &drtioaux::Packet::DmaRemoveTraceReply { succeeded: succeeded })
}
drtioaux::Packet::DmaPlaybackRequest {
destination: _destination,
id,
timestamp,
} => {
forward!(_routing_table, _destination, *_rank, _repeaters, &packet, timer);
let succeeded = dma_manager.playback(id, timestamp).is_ok();
drtioaux::send(0, &drtioaux::Packet::DmaPlaybackReply { succeeded: succeeded })
drtioaux::send(0,
&drtioaux::Packet::SpiReadReply { succeeded: false, data: 0 })
}
_ => {
@ -498,34 +337,20 @@ fn process_aux_packet(
}
}
fn process_aux_packets(
repeaters: &mut [repeater::Repeater],
routing_table: &mut drtio_routing::RoutingTable,
rank: &mut u8,
timer: &mut GlobalTimer,
i2c: &mut I2c,
dma_manager: &mut DmaManager,
analyzer: &mut Analyzer,
) {
let result = drtioaux::recv(0).and_then(|packet| {
if let Some(packet) = packet {
process_aux_packet(
repeaters,
routing_table,
rank,
packet,
timer,
i2c,
dma_manager,
analyzer,
)
} else {
Ok(())
}
});
fn process_aux_packets(repeaters: &mut [repeater::Repeater],
routing_table: &mut drtio_routing::RoutingTable, rank: &mut u8,
timer: &mut GlobalTimer, i2c: &mut I2c) {
let result =
drtioaux::recv(0).and_then(|packet| {
if let Some(packet) = packet {
process_aux_packet(repeaters, routing_table, rank, packet, timer, i2c)
} else {
Ok(())
}
});
match result {
Ok(()) => (),
Err(e) => warn!("aux packet error ({:?})", e),
Err(e) => warn!("aux packet error ({:?})", e)
}
}
@ -545,10 +370,7 @@ fn drtiosat_process_errors() {
unsafe {
destination = csr::drtiosat::buffer_space_timeout_dest_read();
}
error!(
"timeout attempting to get buffer space from CRI, destination=0x{:02x}",
destination
)
error!("timeout attempting to get buffer space from CRI, destination=0x{:02x}", destination)
}
if errors & 8 != 0 {
let channel;
@ -559,13 +381,8 @@ fn drtiosat_process_errors() {
timestamp_event = csr::drtiosat::underflow_timestamp_event_read() as i64;
timestamp_counter = csr::drtiosat::underflow_timestamp_counter_read() as i64;
}
error!(
"write underflow, channel={}, timestamp={}, counter={}, slack={}",
channel,
timestamp_event,
timestamp_counter,
timestamp_event - timestamp_counter
);
error!("write underflow, channel={}, timestamp={}, counter={}, slack={}",
channel, timestamp_event, timestamp_counter, timestamp_event-timestamp_counter);
}
if errors & 16 != 0 {
error!("write overflow");
@ -575,6 +392,25 @@ fn drtiosat_process_errors() {
}
}
#[cfg(has_rtio_crg)]
fn init_rtio_crg(timer: &mut GlobalTimer) {
unsafe {
csr::rtio_crg::pll_reset_write(0);
}
timer.delay_us(150);
let locked = unsafe { csr::rtio_crg::pll_locked_read() != 0 };
if !locked {
error!("RTIO clock failed");
}
else {
info!("RTIO PLL locked");
}
}
#[cfg(not(has_rtio_crg))]
fn init_rtio_crg(_timer: &mut GlobalTimer) { }
fn hardware_tick(ts: &mut u64, timer: &mut GlobalTimer) {
let now = timer.get_time();
let mut ts_ms = Milliseconds(*ts);
@ -585,41 +421,47 @@ fn hardware_tick(ts: &mut u64, timer: &mut GlobalTimer) {
}
#[cfg(all(has_si5324, rtio_frequency = "125.0"))]
const SI5324_SETTINGS: si5324::FrequencySettings = si5324::FrequencySettings {
n1_hs: 5,
nc1_ls: 8,
n2_hs: 7,
n2_ls: 360,
n31: 63,
n32: 63,
bwsel: 4,
crystal_as_ckin2: true,
const SI5324_SETTINGS: si5324::FrequencySettings
= si5324::FrequencySettings {
n1_hs : 5,
nc1_ls : 8,
n2_hs : 7,
n2_ls : 360,
n31 : 63,
n32 : 63,
bwsel : 4,
crystal_ref: true
};
#[cfg(all(has_si5324, rtio_frequency = "100.0"))]
const SI5324_SETTINGS: si5324::FrequencySettings = si5324::FrequencySettings {
n1_hs: 5,
nc1_ls: 10,
n2_hs: 10,
n2_ls: 250,
n31: 50,
n32: 50,
bwsel: 4,
crystal_as_ckin2: true,
const SI5324_SETTINGS: si5324::FrequencySettings
= si5324::FrequencySettings {
n1_hs : 5,
nc1_ls : 10,
n2_hs : 10,
n2_ls : 250,
n31 : 50,
n32 : 50,
bwsel : 4,
crystal_ref: true
};
static mut LOG_BUFFER: [u8; 1 << 17] = [0; 1 << 17];
static mut LOG_BUFFER: [u8; 1<<17] = [0; 1<<17];
#[no_mangle]
pub extern "C" fn main_core0() -> i32 {
pub extern fn main_core0() -> i32 {
enable_l2_cache(0x8);
let mut timer = GlobalTimer::start();
let buffer_logger = unsafe { logger::BufferLogger::new(&mut LOG_BUFFER[..]) };
let buffer_logger = unsafe {
logger::BufferLogger::new(&mut LOG_BUFFER[..])
};
buffer_logger.set_uart_log_level(log::LevelFilter::Info);
buffer_logger.register();
log::set_max_level(log::LevelFilter::Info);
init_gateware();
info!("ARTIQ satellite manager starting...");
info!("gateware ident {}", identifier_read(&mut [0; 64]));
@ -653,22 +495,15 @@ pub extern "C" fn main_core0() -> i32 {
#[cfg(has_si5324)]
si5324::setup(&mut i2c, &SI5324_SETTINGS, si5324::Input::Ckin1, &mut timer).expect("cannot initialize Si5324");
timer.delay_us(100_000);
info!("Switching SYS clocks...");
unsafe {
csr::gt_drtio::stable_clkin_write(1);
}
timer.delay_us(50_000); // wait for CPLL/QPLL/MMCM lock
let clk = unsafe { csr::sys_crg::current_clock_read() };
if clk == 1 {
info!("SYS CLK switched successfully");
} else {
panic!("SYS CLK did not switch");
csr::drtio_transceiver::stable_clkin_write(1);
}
timer.delay_us(1500); // wait for CPLL/QPLL lock
unsafe {
csr::gt_drtio::txenable_write(0xffffffffu32 as _);
csr::drtio_transceiver::txenable_write(0xffffffffu32 as _);
}
init_rtio_crg(&mut timer);
#[cfg(has_drtio_routing)]
let mut repeaters = [repeater::Repeater::default(); csr::DRTIOREP.len()];
@ -676,7 +511,7 @@ pub extern "C" fn main_core0() -> i32 {
let mut repeaters = [repeater::Repeater::default(); 0];
for i in 0..repeaters.len() {
repeaters[i] = repeater::Repeater::new(i as u8);
}
}
let mut routing_table = drtio_routing::RoutingTable::default_empty();
let mut rank = 1;
@ -709,28 +544,13 @@ pub extern "C" fn main_core0() -> i32 {
si5324::siphaser::calibrate_skew(&mut timer).expect("failed to calibrate skew");
}
// DMA manager created here, so when link is dropped, all DMA traces
// are cleared out for a clean slate on subsequent connections,
// without a manual intervention.
let mut dma_manager = DmaManager::new();
// same for RTIO Analyzer
let mut analyzer = Analyzer::new();
drtioaux::reset(0);
drtiosat_reset(false);
drtiosat_reset_phy(false);
while drtiosat_link_rx_up() {
drtiosat_process_errors();
process_aux_packets(
&mut repeaters,
&mut routing_table,
&mut rank,
&mut timer,
&mut i2c,
&mut dma_manager,
&mut analyzer,
);
process_aux_packets(&mut repeaters, &mut routing_table, &mut rank, &mut timer, &mut i2c);
#[allow(unused_mut)]
for mut rep in repeaters.iter_mut() {
rep.service(&routing_table, rank, &mut timer);
@ -772,7 +592,7 @@ extern "C" {
}
interrupt_handler!(IRQ, irq, __irq_stack0_start, __irq_stack1_start, {
if MPIDR.read().cpu_id() == 1 {
if MPIDR.read().cpu_id() == 1{
let mpcore = mpcore::RegisterBlock::mpcore();
let mut gic = gic::InterruptController::gic(mpcore);
let id = gic.get_interrupt_id();
@ -785,7 +605,7 @@ interrupt_handler!(IRQ, irq, __irq_stack0_start, __irq_stack1_start, {
notify_spin_lock();
main_core1();
}
stdio::drop_uart();
stdio::drop_uart();
}
loop {}
});
@ -812,21 +632,18 @@ pub fn main_core1() {
}
#[no_mangle]
pub extern "C" fn exception(_vect: u32, _regs: *const u32, pc: u32, ea: u32) {
pub extern fn exception(_vect: u32, _regs: *const u32, pc: u32, ea: u32) {
fn hexdump(addr: u32) {
let addr = (addr - addr % 4) as *const u32;
let mut ptr = addr;
let mut ptr = addr;
println!("@ {:08p}", ptr);
for _ in 0..4 {
print!("+{:04x}: ", ptr as usize - addr as usize);
print!("{:08x} ", unsafe { *ptr });
ptr = ptr.wrapping_offset(1);
print!("{:08x} ", unsafe { *ptr });
ptr = ptr.wrapping_offset(1);
print!("{:08x} ", unsafe { *ptr });
ptr = ptr.wrapping_offset(1);
print!("{:08x}\n", unsafe { *ptr });
ptr = ptr.wrapping_offset(1);
print!("{:08x} ", unsafe { *ptr }); ptr = ptr.wrapping_offset(1);
print!("{:08x} ", unsafe { *ptr }); ptr = ptr.wrapping_offset(1);
print!("{:08x} ", unsafe { *ptr }); ptr = ptr.wrapping_offset(1);
print!("{:08x}\n", unsafe { *ptr }); ptr = ptr.wrapping_offset(1);
}
}
@ -858,11 +675,7 @@ pub fn panic_fmt(info: &core::panic::PanicInfo) -> ! {
} else {
println!("");
}
#[cfg(feature = "target_kasli_soc")]
{
let mut err_led = ErrorLED::error_led();
err_led.toggle(true);
}
loop {}
}
@ -876,7 +689,7 @@ extern "C" {
}
#[no_mangle]
extern "C" fn dl_unwind_find_exidx(_pc: *const u32, len_ptr: *mut u32) -> *const u32 {
extern fn dl_unwind_find_exidx(_pc: *const u32, len_ptr: *mut u32) -> *const u32 {
let length;
let start: *const u32;
unsafe {

98
src/satman/src/repeater.rs
View File

@ -1,16 +1,19 @@
use libboard_artiq::{drtioaux, drtio_routing};
use libboard_zynq::timer::GlobalTimer;
#[cfg(has_drtio_routing)]
use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
#[cfg(has_drtio_routing)]
use libboard_artiq::pl::csr;
use libboard_artiq::{drtio_routing, drtioaux};
use libboard_artiq::{pl::csr};
#[cfg(has_drtio_routing)]
use libboard_zynq::time::Milliseconds;
use libboard_zynq::timer::GlobalTimer;
#[cfg(has_drtio_routing)]
use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
#[cfg(has_drtio_routing)]
fn rep_link_rx_up(repno: u8) -> bool {
let repno = repno as usize;
unsafe { (csr::DRTIOREP[repno].rx_up_read)() == 1 }
unsafe {
(csr::DRTIOREP[repno].rx_up_read)() == 1
}
}
#[cfg(has_drtio_routing)]
@ -20,14 +23,12 @@ enum RepeaterState {
SendPing { ping_count: u16 },
WaitPingReply { ping_count: u16, timeout: Milliseconds },
Up,
Failed,
Failed
}
#[cfg(has_drtio_routing)]
impl Default for RepeaterState {
fn default() -> RepeaterState {
RepeaterState::Down
}
fn default() -> RepeaterState { RepeaterState::Down }
}
#[cfg(has_drtio_routing)]
@ -35,7 +36,7 @@ impl Default for RepeaterState {
pub struct Repeater {
repno: u8,
auxno: u8,
state: RepeaterState,
state: RepeaterState
}
#[cfg(has_drtio_routing)]
@ -44,7 +45,7 @@ impl Repeater {
Repeater {
repno: repno,
auxno: repno + 1,
state: RepeaterState::Down,
state: RepeaterState::Down
}
}
@ -53,7 +54,8 @@ impl Repeater {
self.state == RepeaterState::Up
}
pub fn service(&mut self, routing_table: &drtio_routing::RoutingTable, rank: u8, timer: &mut GlobalTimer) {
pub fn service(&mut self, routing_table: &drtio_routing::RoutingTable, rank: u8,
timer: &mut GlobalTimer) {
self.process_local_errors();
match self.state {
@ -68,7 +70,7 @@ impl Repeater {
drtioaux::send(self.auxno, &drtioaux::Packet::EchoRequest).unwrap();
self.state = RepeaterState::WaitPingReply {
ping_count: ping_count + 1,
timeout: timer.get_time() + Milliseconds(100),
timeout: timer.get_time() + Milliseconds(100)
}
} else {
error!("[REP#{}] link RX went down during ping", self.repno);
@ -130,7 +132,7 @@ impl Repeater {
match drtioaux::recv(self.auxno) {
Ok(Some(packet)) => warn!("[REP#{}] unsolicited aux packet: {:?}", self.repno, packet),
Ok(None) => (),
Err(_) => warn!("[REP#{}] aux packet error", self.repno),
Err(_) => warn!("[REP#{}] aux packet error", self.repno)
}
}
@ -153,20 +155,14 @@ impl Repeater {
cmd = (csr::DRTIOREP[repno].command_missed_cmd_read)();
chan_sel = (csr::DRTIOREP[repno].command_missed_chan_sel_read)();
}
error!(
"[REP#{}] CRI command missed, cmd={}, chan_sel=0x{:06x}",
repno, cmd, chan_sel
)
error!("[REP#{}] CRI command missed, cmd={}, chan_sel=0x{:06x}", repno, cmd, chan_sel)
}
if errors & 8 != 0 {
let destination;
unsafe {
destination = (csr::DRTIOREP[repno].buffer_space_timeout_dest_read)();
}
error!(
"[REP#{}] timeout attempting to get remote buffer space, destination=0x{:02x}",
repno, destination
);
error!("[REP#{}] timeout attempting to get remote buffer space, destination=0x{:02x}", repno, destination);
}
unsafe {
(csr::DRTIOREP[repno].protocol_error_write)(errors);
@ -185,7 +181,7 @@ impl Repeater {
match drtioaux::recv(self.auxno) {
Ok(Some(packet)) => return Ok(packet),
Ok(None) => (),
Err(e) => return Err(e),
Err(e) => return Err(e)
}
}
}
@ -221,24 +217,15 @@ impl Repeater {
}
}
pub fn set_path(
&self,
destination: u8,
hops: &[u8; drtio_routing::MAX_HOPS],
timer: &mut GlobalTimer,
) -> Result<(), drtioaux::Error> {
pub fn set_path(&self, destination: u8, hops: &[u8; drtio_routing::MAX_HOPS], timer: &mut GlobalTimer) -> Result<(), drtioaux::Error> {
if self.state != RepeaterState::Up {
return Ok(());
}
drtioaux::send(
self.auxno,
&drtioaux::Packet::RoutingSetPath {
destination: destination,
hops: *hops,
},
)
.unwrap();
drtioaux::send(self.auxno, &drtioaux::Packet::RoutingSetPath {
destination: destination,
hops: *hops
}).unwrap();
let reply = self.recv_aux_timeout(200, timer)?;
if reply != drtioaux::Packet::RoutingAck {
return Err(drtioaux::Error::UnexpectedReply);
@ -246,11 +233,7 @@ impl Repeater {
Ok(())
}
pub fn load_routing_table(
&self,
routing_table: &drtio_routing::RoutingTable,
timer: &mut GlobalTimer,
) -> Result<(), drtioaux::Error> {
pub fn load_routing_table(&self, routing_table: &drtio_routing::RoutingTable, timer: &mut GlobalTimer) -> Result<(), drtioaux::Error> {
for i in 0..drtio_routing::DEST_COUNT {
self.set_path(i as u8, &routing_table.0[i], timer)?;
}
@ -261,7 +244,9 @@ impl Repeater {
if self.state != RepeaterState::Up {
return Ok(());
}
drtioaux::send(self.auxno, &drtioaux::Packet::RoutingSetRank { rank: rank }).unwrap();
drtioaux::send(self.auxno, &drtioaux::Packet::RoutingSetRank {
rank: rank
}).unwrap();
let reply = self.recv_aux_timeout(200, timer)?;
if reply != drtioaux::Packet::RoutingAck {
return Err(drtioaux::Error::UnexpectedReply);
@ -271,13 +256,9 @@ impl Repeater {
pub fn rtio_reset(&self, timer: &mut GlobalTimer) -> Result<(), drtioaux::Error> {
let repno = self.repno as usize;
unsafe {
(csr::DRTIOREP[repno].reset_write)(1);
}
unsafe { (csr::DRTIOREP[repno].reset_write)(1); }
timer.delay_us(100);
unsafe {
(csr::DRTIOREP[repno].reset_write)(0);
}
unsafe { (csr::DRTIOREP[repno].reset_write)(0); }
if self.state != RepeaterState::Up {
return Ok(());
@ -294,21 +275,16 @@ impl Repeater {
#[cfg(not(has_drtio_routing))]
#[derive(Clone, Copy, Default)]
pub struct Repeater {}
pub struct Repeater {
}
#[cfg(not(has_drtio_routing))]
impl Repeater {
pub fn new(_repno: u8) -> Repeater {
Repeater::default()
}
pub fn new(_repno: u8) -> Repeater { Repeater::default() }
pub fn service(&self, _routing_table: &drtio_routing::RoutingTable, _rank: u8, _timer: &mut GlobalTimer) {}
pub fn service(&self, _routing_table: &drtio_routing::RoutingTable, _rank: u8, _timer: &mut GlobalTimer) { }
pub fn sync_tsc(&self, _timer: &mut GlobalTimer) -> Result<(), drtioaux::Error> {
Ok(())
}
pub fn sync_tsc(&self, _timer: &mut GlobalTimer) -> Result<(), drtioaux::Error> { Ok(()) }
pub fn rtio_reset(&self, _timer: &mut GlobalTimer) -> Result<(), drtioaux::Error> {
Ok(())
}
pub fn rtio_reset(&self, _timer: &mut GlobalTimer) -> Result<(), drtioaux::Error> { Ok(()) }
}