srenblad
/
assembly
forked from sinara-hw/assembly
1
0
Fork 0
Code Pull Requests Activity

stabilizer: how to clear usb settings

This commit is contained in:
mwojcik 2024-06-20 13:21:57 +08:00
parent ea1b0b5c56
commit 2777676057
1 changed files with 13 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
src/hw/stabilizer.md
View File

@ -78,6 +78,19 @@ dfu-util -a 0 -s 0x08000000:leave -R -D dual-iir.bin
For normal usage, the stabilizer must be configured with USB console later (try ``help`` command first), to set its IP address and MQTT broker address. However, for general testing (like the one below), you don't need to configure it any further. For normal usage, the stabilizer must be configured with USB console later (try ``help`` command first), to set its IP address and MQTT broker address. However, for general testing (like the one below), you don't need to configure it any further.
### Clearing settings
In case someone sets some setting wrongly, or updates the firmware and suddenly there's an incompatibility, you may find (firmware, not yourself) in a state of panic, where it will not allow you to change the settings back.
1. Get into DFU mode (described above), probably with jumper method.
2. Use dfu-util to clear the flash completely:
```
dfu-util -a 0 -s 0x08000000:mass-erase:force:leave
```
3. Reflash the target firmware.
## Testing ## Testing
1. Ensure that the [firmware](#getting-the-firmware) has been flashed onto the Stabilizer 1. Ensure that the [firmware](#getting-the-firmware) has been flashed onto the Stabilizer