forked from M-Labs/artiq
175 lines
6.2 KiB
Python
175 lines
6.2 KiB
Python
from artiq.language.core import (kernel, portable, delay_mu, delay)
|
|
from artiq.language.units import ns, us
|
|
from artiq.coredevice import spi
|
|
|
|
# Designed from the data sheets and somewhat after the linux kernel
|
|
# iio driver.
|
|
|
|
_AD5360_SPI_CONFIG = (0*spi.SPI_OFFLINE | 0*spi.SPI_CS_POLARITY |
|
|
0*spi.SPI_CLK_POLARITY | 1*spi.SPI_CLK_PHASE |
|
|
0*spi.SPI_LSB_FIRST | 0*spi.SPI_HALF_DUPLEX)
|
|
|
|
_AD5360_CMD_DATA = 3 << 22
|
|
_AD5360_CMD_OFFSET = 2 << 22
|
|
_AD5360_CMD_GAIN = 1 << 22
|
|
_AD5360_CMD_SPECIAL = 0 << 22
|
|
|
|
|
|
@portable
|
|
def _AD5360_WRITE_CHANNEL(c):
|
|
return (c + 8) << 16
|
|
|
|
_AD5360_SPECIAL_NOP = 0 << 16
|
|
_AD5360_SPECIAL_CONTROL = 1 << 16
|
|
_AD5360_SPECIAL_OFS0 = 2 << 16
|
|
_AD5360_SPECIAL_OFS1 = 3 << 16
|
|
_AD5360_SPECIAL_READ = 5 << 16
|
|
|
|
|
|
@portable
|
|
def _AD5360_READ_CHANNEL(ch):
|
|
return (ch + 8) << 7
|
|
|
|
_AD5360_READ_X1A = 0x000 << 7
|
|
_AD5360_READ_X1B = 0x040 << 7
|
|
_AD5360_READ_OFFSET = 0x080 << 7
|
|
_AD5360_READ_GAIN = 0x0c0 << 7
|
|
_AD5360_READ_CONTROL = 0x101 << 7
|
|
_AD5360_READ_OFS0 = 0x102 << 7
|
|
_AD5360_READ_OFS1 = 0x103 << 7
|
|
|
|
|
|
class AD5360:
|
|
"""
|
|
Support for the Analog devices AD53[67][0123]
|
|
multi-channel Digital to Analog Converters
|
|
|
|
:param spi_device: Name of the SPI bus this device is on.
|
|
:param ldac_device: Name of the TTL device that LDAC is connected to
|
|
(optional). Needs to be explicitly initialized to high.
|
|
:param chip_select: Value to drive on the chip select lines
|
|
during transactions.
|
|
"""
|
|
|
|
def __init__(self, dmgr, spi_device, ldac_device=None, chip_select=1):
|
|
self.core = dmgr.get("core")
|
|
self.bus = dmgr.get(spi_device)
|
|
if ldac_device is not None:
|
|
self.ldac = dmgr.get(ldac_device)
|
|
self.chip_select = chip_select
|
|
|
|
@kernel
|
|
def setup_bus(self, write_div=4, read_div=7):
|
|
"""Configure the SPI bus and the SPI transaction parameters
|
|
for this device. This method has to be called before any other method
|
|
if the bus has been used to access a different device in the meantime.
|
|
|
|
This method advances the timeline by the duration of two
|
|
RTIO-to-Wishbone bus transactions.
|
|
|
|
:param write_div: Write clock divider.
|
|
:param read_div: Read clock divider.
|
|
"""
|
|
# write: 2*8ns >= 10ns = t_6 (clk falling to cs_n rising)
|
|
# read: 4*8*ns >= 25ns = t_22 (clk falling to miso valid)
|
|
self.bus.set_config_mu(_AD5360_SPI_CONFIG, write_div, read_div)
|
|
self.bus.set_xfer(self.chip_select, 24, 0)
|
|
|
|
@kernel
|
|
def write(self, data):
|
|
"""Write 24 bits of data.
|
|
|
|
This method advances the timeline by the duration of the SPI transfer
|
|
and the required CS high time.
|
|
"""
|
|
self.bus.write(data << 8)
|
|
delay_mu(self.bus.ref_period_mu) # get to 20ns min cs high
|
|
|
|
@kernel
|
|
def write_offsets(self, value=0x1fff):
|
|
"""Write the OFS0 and OFS1 offset DACs.
|
|
|
|
This method advances the timeline by twice the duration of
|
|
:meth:`write`.
|
|
|
|
:param value: Value to set both offset registers to.
|
|
"""
|
|
value &= 0x3fff
|
|
self.write(_AD5360_CMD_SPECIAL | _AD5360_SPECIAL_OFS0 | value)
|
|
self.write(_AD5360_CMD_SPECIAL | _AD5360_SPECIAL_OFS1 | value)
|
|
|
|
@kernel
|
|
def write_channel(self, channel=0, value=0, op=_AD5360_CMD_DATA):
|
|
"""Write to a channel register.
|
|
|
|
This method advances the timeline by the duration of :meth:`write`.
|
|
|
|
:param channel: Channel number to write to.
|
|
:param value: 16 bit value to write to the register.
|
|
:param op: Operation to perform, one of :const:`_AD5360_CMD_DATA`,
|
|
:const:`_AD5360_CMD_OFFSET`, :const:`_AD5360_CMD_GAIN`
|
|
(default: :const:`_AD5360_CMD_DATA`).
|
|
"""
|
|
channel &= 0x3f
|
|
value &= 0xffff
|
|
self.write(op | _AD5360_WRITE_CHANNEL(channel) | value)
|
|
|
|
@kernel
|
|
def read_channel_sync(self, channel=0, op=_AD5360_READ_X1A):
|
|
"""Read a channel register.
|
|
|
|
This method advances the timeline by the duration of :meth:`write` plus
|
|
three RTIO-to-Wishbone transactions.
|
|
|
|
:param channel: Channel number to read from.
|
|
:param op: Operation to perform, one of :const:`_AD5360_READ_X1A`,
|
|
:const:`_AD5360_READ_X1B`, :const:`_AD5360_READ_OFFSET`,
|
|
:const:`_AD5360_READ_GAIN` (default: :const:`_AD5360_READ_X1A`).
|
|
:return: The 16 bit register value.
|
|
"""
|
|
channel &= 0x3f
|
|
self.write(_AD5360_CMD_SPECIAL | _AD5360_SPECIAL_READ | op |
|
|
_AD5360_READ_CHANNEL(channel))
|
|
self.bus.set_xfer(self.chip_select, 0, 24)
|
|
self.write(_AD5360_CMD_SPECIAL | _AD5360_SPECIAL_NOP)
|
|
self.bus.read_async()
|
|
self.bus.set_xfer(self.chip_select, 24, 0)
|
|
return self.bus.input_async() & 0xffff
|
|
|
|
@kernel
|
|
def load(self):
|
|
"""Pulse the LDAC line.
|
|
|
|
This method advances the timeline by two RTIO clock periods (16 ns).
|
|
"""
|
|
self.ldac.off()
|
|
# t13 = 10ns ldac pulse width low
|
|
delay_mu(2*self.bus.ref_period_mu)
|
|
self.ldac.on()
|
|
|
|
@kernel
|
|
def set(self, values, op=_AD5360_CMD_DATA):
|
|
"""Write to several channels and pulse LDAC to update the channels.
|
|
|
|
This method does not advance the timeline. Write events are scheduled
|
|
in the past. The DACs will synchronously start changing their output
|
|
levels `now`.
|
|
|
|
:param values: List of 16 bit values to write to the channels.
|
|
:param op: Operation to perform, one of :const:`_AD5360_CMD_DATA`,
|
|
:const:`_AD5360_CMD_OFFSET`, :const:`_AD5360_CMD_GAIN`
|
|
(default: :const:`_AD5360_CMD_DATA`).
|
|
"""
|
|
# compensate all delays that will be applied
|
|
delay_mu(-len(values)*(self.bus.xfer_period_mu +
|
|
self.bus.write_period_mu +
|
|
self.bus.ref_period_mu) -
|
|
3*self.bus.ref_period_mu -
|
|
self.core.seconds_to_mu(1.5*us))
|
|
for i in range(len(values)):
|
|
self.write_channel(i, values[i], op)
|
|
delay_mu(3*self.bus.ref_period_mu + # latency alignment ttl to spi
|
|
self.core.seconds_to_mu(1.5*us)) # t10 max busy low for one channel
|
|
self.load()
|
|
delay_mu(-2*self.bus.ref_period_mu) # load(), t13
|