forked from M-Labs/artiq
252 lines
8.9 KiB
ReStructuredText
252 lines
8.9 KiB
ReStructuredText
.. _install-from-source:
|
|
|
|
Installing ARTIQ from source
|
|
============================
|
|
|
|
.. note::
|
|
This method is only recommended for developers and advanced users. An easier way to install ARTIQ is via the Anaconda packages (see :ref:`Installing ARTIQ <install-from-conda>`).
|
|
|
|
|
|
Preparing the build environment for the core device
|
|
---------------------------------------------------
|
|
|
|
These steps are required to generate code that can run on the core
|
|
device. They are necessary both for building the MiSoC BIOS
|
|
and the ARTIQ kernels.
|
|
|
|
* Install required host packages: ::
|
|
|
|
$ sudo apt-get install python3.5 pip3 build-essential cmake cargo
|
|
|
|
* Create a development directory: ::
|
|
|
|
$ mkdir ~/artiq-dev
|
|
|
|
* Clone ARTIQ repository: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone --recursive https://github.com/m-labs/artiq
|
|
|
|
* Install OpenRISC binutils (or1k-linux-...): ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ wget https://ftp.gnu.org/gnu/binutils/binutils-2.27.tar.bz2
|
|
$ tar xvf binutils-2.27.tar.bz2
|
|
$ cd binutils-2.27
|
|
$ curl -L 'https://raw.githubusercontent.com/m-labs/conda-recipes/ece4cefbcce5548c5bd7fd4740d71ecd6930065e/conda/binutils-or1k-linux/fix-R_OR1K_GOTOFF-relocations.patch' | patch -p1
|
|
|
|
$ mkdir build
|
|
$ cd build
|
|
$ ../configure --target=or1k-linux --prefix=/usr/local
|
|
$ make -j4
|
|
$ sudo make install
|
|
|
|
.. note::
|
|
We're using an ``or1k-linux`` target because it is necessary to enable
|
|
shared library support in ``ld``, not because Linux is involved.
|
|
|
|
* Install LLVM and Clang: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone -b artiq-3.9 https://github.com/m-labs/llvm-or1k
|
|
$ cd llvm-or1k
|
|
$ git clone -b artiq-3.9 https://github.com/m-labs/clang-or1k tools/clang
|
|
|
|
$ mkdir build
|
|
$ cd build
|
|
$ cmake .. -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr/local/llvm-or1k -DLLVM_TARGETS_TO_BUILD="OR1K;X86" -DLLVM_ENABLE_ASSERTIONS=ON -DLLVM_INSTALL_UTILS=ON
|
|
$ make -j4
|
|
$ sudo make install
|
|
|
|
* Install Rust: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone -b artiq-1.16.0 https://github.com/m-labs/rust
|
|
$ cd rust
|
|
$ git submodule update --init
|
|
$ mkdir build
|
|
$ cd build
|
|
$ ../configure --prefix=/usr/local/rust-or1k --llvm-root=/usr/local/llvm-or1k --disable-manage-submodules
|
|
$ sudo make install -j4
|
|
|
|
$ libs="libcore liballoc libstd_unicode libcollections liblibc_mini libunwind"
|
|
$ rustc="/usr/local/rust-or1k/bin/rustc --target or1k-unknown-none -g -C target-feature=+mul,+div,+ffl1,+cmov,+addc -C opt-level=s -L ."
|
|
$ destdir="/usr/local/rust-or1k/lib/rustlib/or1k-unknown-none/lib/"
|
|
$ mkdir ../build-or1k
|
|
$ cd ../build-or1k
|
|
$ for lib in ${libs}; do ${rustc} ../src/${lib}/lib.rs; done
|
|
$ ${rustc} -Cpanic=abort ../src/libpanic_abort/lib.rs
|
|
$ ${rustc} -Cpanic=unwind ../src/libpanic_unwind/lib.rs --cfg llvm_libunwind
|
|
$ sudo mkdir -p ${destdir}
|
|
$ sudo cp *.rlib ${destdir}
|
|
|
|
.. note::
|
|
Compilation of LLVM can take more than 30 min on some machines. Compilation of Rust can take more than two hours.
|
|
|
|
Preparing the core device FPGA board
|
|
------------------------------------
|
|
|
|
These steps are required to generate gateware bitstream (``.bit``) files, build the MiSoC BIOS and ARTIQ runtime, and flash FPGA boards. If the board is already flashed, you may skip those steps and go directly to `Installing the host-side software`.
|
|
|
|
* Install the FPGA vendor tools (i.e. Xilinx ISE and/or Vivado):
|
|
|
|
* Get Xilinx tools from http://www.xilinx.com/support/download/index.htm. ISE can build gateware bitstreams both for boards using the Spartan-6 (Pipistrello) and 7-series devices (KC705), while Vivado supports only boards using 7-series devices.
|
|
|
|
* The Pipistrello is supported by Webpack, the KC705 is not.
|
|
|
|
* During the Xilinx toolchain installation, uncheck ``Install cable drivers`` (they are not required as we use better and open source alternatives).
|
|
|
|
* Install Migen: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone https://github.com/m-labs/migen
|
|
$ cd migen
|
|
$ python3.5 setup.py develop --user
|
|
|
|
.. note::
|
|
The options ``develop`` and ``--user`` are for setup.py to install Migen in ``~/.local/lib/python3.5``.
|
|
|
|
* Install the required flash proxy gateware bitstreams:
|
|
|
|
The purpose of the flash proxy gateware bitstream is to give programming software fast JTAG access to the flash connected to the FPGA.
|
|
|
|
* Pipistrello and KC705:
|
|
|
|
::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ wget https://raw.githubusercontent.com/jordens/bscan_spi_bitstreams/master/bscan_spi_xc7k325t.bit
|
|
$ wget https://raw.githubusercontent.com/jordens/bscan_spi_bitstreams/master/bscan_spi_xc6slx45.bit
|
|
|
|
Then move both files ``~/artiq-dev/bscan_spi_xc6slx45.bit`` and ``~/artiq-dev/bscan_spi_xc7k325t.bit`` to ``~/.migen``, ``/usr/local/share/migen``, or ``/usr/share/migen``.
|
|
|
|
* :ref:`Download and install OpenOCD <install-openocd>`.
|
|
|
|
* Download and install ``asyncserial``: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone https://www.github.com/m-labs/asyncserial
|
|
$ cd asyncserial
|
|
$ python3.5 setup.py develop --user
|
|
|
|
* Download and install MiSoC: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone --recursive https://github.com/m-labs/misoc
|
|
$ cd misoc
|
|
$ python3.5 setup.py develop --user
|
|
|
|
* Download and install ``pythonparser``: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone https://www.github.com/m-labs/pythonparser
|
|
$ cd pythonparser
|
|
$ python3.5 setup.py develop --user
|
|
|
|
* Download and install ARTIQ: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone --recursive https://github.com/m-labs/artiq
|
|
$ cd artiq
|
|
$ python3.5 setup.py develop --user
|
|
|
|
.. note::
|
|
If you have any trouble during ARTIQ setup about ``pygit2`` installation,
|
|
refer to the section dealing with
|
|
:ref:`installing the host-side software <installing-the-host-side-software>`.
|
|
|
|
|
|
* Build the gateware bitstream, BIOS and runtime by running:
|
|
::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ export PATH=/usr/local/llvm-or1k/bin:$PATH
|
|
|
|
.. note:: Make sure that ``/usr/local/llvm-or1k/bin`` is first in your ``PATH``, so that the ``clang`` command you just built is found instead of the system one, if any.
|
|
|
|
* For Pipistrello::
|
|
|
|
$ python3.5 -m artiq.gateware.targets.pipistrello
|
|
|
|
* For KC705::
|
|
|
|
$ python3.5 -m artiq.gateware.targets.kc705 -H nist_clock # or nist_qc2
|
|
|
|
.. note:: Add ``--toolchain ise`` if you wish to use ISE instead of Vivado.
|
|
|
|
* Then, gather the binaries and flash them: ::
|
|
|
|
$ mkdir binaries
|
|
$ cp misoc_nist_qcX_<board>/gateware/top.bit binaries
|
|
$ cp misoc_nist_qcX_<board>/software/bios/bios.bin binaries
|
|
$ cp misoc_nist_qcX_<board>/software/runtime/runtime.fbi binaries
|
|
$ cd binaries
|
|
$ artiq_flash -d . -t <board>
|
|
|
|
.. note:: The `-t` option specifies the board your are targeting. Available options are ``kc705`` and ``pipistrello``.
|
|
|
|
* Check that the board boots by running a serial terminal program (you may need to press its FPGA reconfiguration button or power-cycle it to load the gateware bitstream that was newly written into the flash): ::
|
|
|
|
$ flterm /dev/ttyUSB1
|
|
MiSoC BIOS http://m-labs.hk
|
|
[...]
|
|
Booting from flash...
|
|
Loading xxxxx bytes from flash...
|
|
Executing booted program.
|
|
ARTIQ runtime built <date/time>
|
|
|
|
.. note:: flterm is part of MiSoC. If you installed MiSoC with ``setup.py develop --user``, the flterm launcher is in ``~/.local/bin``.
|
|
|
|
The communication parameters are 115200 8-N-1. Ensure that your user has access
|
|
to the serial device (``sudo adduser $USER dialout`` assuming standard setup).
|
|
|
|
.. _installing-the-host-side-software:
|
|
|
|
Installing the host-side software
|
|
---------------------------------
|
|
|
|
* Install the llvmlite Python bindings: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone https://github.com/m-labs/llvmlite
|
|
$ cd llvmlite
|
|
$ git checkout artiq-3.8
|
|
$ LLVM_CONFIG=/usr/local/llvm-or1k/bin/llvm-config python3.5 setup.py install --user
|
|
|
|
* Install ARTIQ: ::
|
|
|
|
$ cd ~/artiq-dev
|
|
$ git clone --recursive https://github.com/m-labs/artiq # if not already done
|
|
$ cd artiq
|
|
$ python3.5 setup.py develop --user
|
|
|
|
.. note::
|
|
If you have any trouble during ARTIQ setup about ``pygit2`` installation,
|
|
you can install it by using ``pip``:
|
|
|
|
On Ubuntu 14.04::
|
|
|
|
$ python3.5 `which pip3` install --user pygit2==0.19.1
|
|
|
|
On Ubuntu 14.10::
|
|
|
|
$ python3.5 `which pip3` install --user pygit2==0.20.3
|
|
|
|
On Ubuntu 15.04 and 15.10::
|
|
|
|
$ python3.5 `which pip3` install --user pygit2==0.22.1
|
|
|
|
On Ubuntu 16.04::
|
|
|
|
$ python3.5 `which pip3` install --user pygit2==0.24.1
|
|
|
|
The rationale behind this is that pygit2 and libgit2 must have the same
|
|
major.minor version numbers.
|
|
|
|
See http://www.pygit2.org/install.html#version-numbers
|
|
|
|
* Build the documentation: ::
|
|
|
|
$ cd ~/artiq-dev/artiq/doc/manual
|
|
$ make html
|