forked from M-Labs/artiq
61 lines
2.0 KiB
Python
61 lines
2.0 KiB
Python
import unittest
|
|
from artiq.experiment import *
|
|
from artiq.test.hardware_testbench import ExperimentCase
|
|
from artiq.language.core import (kernel, delay_mu, delay)
|
|
from artiq.language.units import us
|
|
from artiq.coredevice import spi2 as spi
|
|
|
|
|
|
_SDCARD_SPI_CONFIG = (0*spi.SPI_OFFLINE | 0*spi.SPI_END |
|
|
0*spi.SPI_INPUT | 0*spi.SPI_CS_POLARITY |
|
|
0*spi.SPI_CLK_POLARITY | 0*spi.SPI_CLK_PHASE |
|
|
0*spi.SPI_LSB_FIRST | 0*spi.SPI_HALF_DUPLEX)
|
|
|
|
|
|
class CardTest(EnvExperiment):
|
|
def build(self):
|
|
self.setattr_device("core")
|
|
self.setattr_device("spi_mmc")
|
|
|
|
@kernel
|
|
def run(self):
|
|
self.core.reset()
|
|
|
|
freq = 1*MHz
|
|
cs = 1
|
|
|
|
# run a couple of clock cycles with miso high to wake up the card
|
|
self.spi_mmc.set_config(_SDCARD_SPI_CONFIG, 32, freq, 0)
|
|
for i in range(10):
|
|
self.spi_mmc.write(0xffffffff)
|
|
self.spi_mmc.set_config(_SDCARD_SPI_CONFIG | spi.SPI_END, 32, freq, 0)
|
|
self.spi_mmc.write(0xffffffff)
|
|
delay(200*us)
|
|
|
|
self.spi_mmc.set_config(_SDCARD_SPI_CONFIG, 8, freq, cs)
|
|
self.spi_mmc.write(0x40 << 24) # CMD
|
|
self.spi_mmc.set_config(_SDCARD_SPI_CONFIG, 32, freq, cs)
|
|
self.spi_mmc.write(0x00000000) # ARG
|
|
self.spi_mmc.set_config(_SDCARD_SPI_CONFIG, 8, freq, cs)
|
|
self.spi_mmc.write(0x95 << 24) # CRC
|
|
self.spi_mmc.set_config(_SDCARD_SPI_CONFIG | spi.SPI_INPUT, 8, freq, cs)
|
|
idle = False
|
|
response = 0
|
|
for i in range(8):
|
|
self.spi_mmc.write(0xff << 24) # NCR
|
|
response = self.spi_mmc.read()
|
|
delay(100*us)
|
|
if response == 0x01:
|
|
idle = True
|
|
break
|
|
self.spi_mmc.set_config(_SDCARD_SPI_CONFIG | spi.SPI_END, 8, freq, cs)
|
|
self.spi_mmc.write(0xff << 24)
|
|
if not idle:
|
|
print(response)
|
|
raise ValueError("SD Card did not reply with IDLE")
|
|
|
|
|
|
class SDTest(ExperimentCase):
|
|
def test(self):
|
|
self.execute(CardTest)
|