#[cfg(has_converter_spi)] use csr; #[cfg(has_converter_spi)] pub fn set_config(busno: u8, flags: u8, write_div: u8, read_div: u8) -> Result<(), ()> { if busno != 0 { return Err(()) } unsafe { csr::converter_spi::offline_write(1); csr::converter_spi::cs_polarity_write(flags >> 3 & 1); csr::converter_spi::clk_polarity_write(flags >> 4 & 1); csr::converter_spi::clk_phase_write(flags >> 5 & 1); csr::converter_spi::lsb_first_write(flags >> 6 & 1); csr::converter_spi::half_duplex_write(flags >> 7 & 1); csr::converter_spi::clk_div_write_write(write_div); csr::converter_spi::clk_div_read_write(read_div); csr::converter_spi::offline_write(0); } Ok(()) } #[cfg(has_converter_spi)] pub fn set_xfer(busno: u8, chip_select: u16, write_length: u8, read_length: u8) -> Result<(), ()> { if busno != 0 { return Err(()) } unsafe { csr::converter_spi::cs_write(chip_select as _); csr::converter_spi::xfer_len_write_write(write_length); csr::converter_spi::xfer_len_read_write(read_length); } Ok(()) } #[cfg(has_converter_spi)] pub fn write(busno: u8, data: u32) -> Result<(), ()> { if busno != 0 { return Err(()) } unsafe { csr::converter_spi::data_write_write(data); while csr::converter_spi::pending_read() != 0 {} while csr::converter_spi::active_read() != 0 {} } Ok(()) } #[cfg(has_converter_spi)] pub fn read(busno: u8) -> Result { if busno != 0 { return Err(()) } Ok(unsafe { csr::converter_spi::data_read_read() }) } #[cfg(not(has_converter_spi))] pub fn set_config(_busno: u8, _flags: u8, _write_div: u8, _read_div: u8) -> Result<(), ()> { Err(()) } #[cfg(not(has_converter_spi))] pub fn set_xfer(_busno: u8,_chip_select: u16, _write_length: u8, _read_length: u8) -> Result<(), ()> { Err(()) } #[cfg(not(has_converter_spi))] pub fn write(_busno: u8,_data: u32) -> Result<(), ()> { Err(()) } #[cfg(not(has_converter_spi))] pub fn read(_busno: u8,) -> Result { Err(()) }