srenblad
/
artiq
forked from M-Labs/artiq
1
0
Fork 0
Code Pull Requests Activity
5,721 Commits 63 Branches 34 Tags 19 MiB
Commit Graph

489 Commits

Author SHA1 Message Date
Robert Jördens ae80bab180 urukul: reg based io-update is a kernel 2018-04-27 16:42:09 +00:00
Robert Jördens 5f00326c65 suservo: coeff mem write port READ_FIRST 2018-04-27 15:43:32 +00:00
Robert Jördens 73fa572275 suservo: documentation, small API changes 2018-04-27 16:53:22 +02:00
Robert Jördens 307cd07b9d suservo: lots of gateware/ runtime changes 
tested/validated:

* servo enable/disable
* dds interface, timing, io_update, mask_nu
* channel control (en_out, en_iir, profile)
* profile configuration (coefficients, delays, offsets, channel)
* adc timings and waveforms measured
* asf state readback
* adc readback

individual changes below:

suservo: correct rtio readback

suservo: example, device_db [wip]

suservo: change rtio channel layout

suservo: mem ports in rio domain

suservo: sck clocked from rio_phy

suservo: cleanup, straighten out timing

suservo: dds cs polarity

suservo: simplify pipeline

suservo: drop unused eem names

suservo: decouple adc SR from IIR

suservo: expand coredevice layer

suservo: start the correct stage

suservo: actually load ctrl

suservo: refactor/tweak adc timing

suservo: implement cpld and dds init
 2018-04-27 13:50:26 +02:00
Robert Jördens 01f762a8f5 urukul/ad9910: support blind init 
urukul: always set io_update attribute
to silence compiler warning w.r.t. kernel_invariants
 2018-04-27 13:48:40 +02:00
Robert Jördens edbc7763e0 urukul: allow no io_update_device 2018-04-25 17:32:36 +00:00
Sebastien Bourdeauducq c47d3ec8c8 zotino: use None as default for ldac and clr 
This is also what AD53xx does.
 2018-04-22 15:03:01 +08:00
whitequark 3b054855ec firmware: add allocator debug feature, invoked by artiq_coredebug frontend. 2018-04-21 19:39:46 +00:00
Sebastien Bourdeauducq 5ca59467fd ad53xx: make LDAC and CLR optional 2018-03-26 22:45:01 +08:00
Robert Jördens a8f0ee1c86 ad53xx: refactor offset_to_mu(), fix docs 2018-03-24 15:45:42 +01:00
Robert Jördens b0c8097025 ad53xx: remove channel index AND 
It's incorrect since it doesn't respect the number of channels
of any of those chips (none has 64 channels).
 2018-03-24 15:39:06 +01:00
Robert Jördens 77bcc2c78f zotino: style, use attributes to set SPI config 2018-03-24 15:37:34 +01:00
Robert Jördens 2cf414a480 ad53xx: move 8 bit shift out of ad53xx protocol funcs 
That's specific to the SPI bus, not to the ad53xx.
 2018-03-24 15:15:56 +01:00
Robert Jördens 08326c5727 ad53xx: style [nfc] 2018-03-24 14:10:20 +01:00
hartytp a992a672d9 coredevice/zotino: add (#969) 
* Replace ad5360 driver with a ad53xx driver, designed to have a nicer interface
Add Zotino driver and add to opticlock target for Kasli
Test Zotino on hw:
 - Verify all timings on the hardware with a scope
 - Verify that we can correctly set and read back all registers in a loop (checks for SI and driver issues)
 - check we can set LEDs correctly
 - check calibration routine + all si unit functions with a good DVM
 - look at DAC transitions on a scope (while triggering of a TTL) on persist to check there are no LDAC glitches etc
To do: update examples and e.g. KC705 device db.
 2018-03-24 13:41:18 +01:00
Robert Jördens 770b0a7b79 novogorny: conv -> cnv 
* parity with sampler
* also add novogorny device to opticlock
 2018-03-21 18:38:42 +00:00
Robert Jördens 82c4f0eed4 sampler: fix channel gain retrieval 2018-03-21 14:22:13 +01:00
Robert Jördens 97918447a3 sampler: add coredevice driver 2018-03-21 12:21:53 +00:00
Robert Jördens 80903cead7 novogorny: streamline gain setting method, style [nfc] 2018-03-21 08:53:26 +00:00
Robert Jördens 9ad1fd8f25 urukul: add comment and doc about the AD9910 MASTER_RESET 2018-03-20 17:40:03 +01:00
Robert Jördens f17c0abfe4 urukul: don't pulse DDS_RST on init 
closes m-labs/artiq#940

Apparently, if the DDS are reset, every other time they don't work
properly.
 2018-03-20 16:10:26 +00:00
Robert Jördens a185e8dc52 urukul: fix MASK_NU offset 2018-03-20 16:10:11 +00:00
hartytp a27b5d88c2 Novogorny driver, remove unused imports (#964) 
* Novogorny driver, remove unused imports

* more unused imports

* oops, one final one!
 2018-03-19 11:58:14 +01:00
Robert Jördens f39b7b33e8 ad5360: whitespace [nfc] 2018-03-17 18:51:17 +01:00
ion c1439bfd3b Fix AD5360 after migration to SPI2 2018-03-17 11:37:11 +00:00
Robert Jördens a04bd5a4fd spi2: xfers take one more cycle until ~busy 2018-03-09 20:48:17 +01:00
Robert Jördens 37ec97eb28 ad9910/2: add sw invariant only when passed 2018-03-07 21:32:59 +01:00
Robert Jördens f4dad87fd9 coredevice: add pcf8574a driver 
I2C IO expander with 8 quasi-bidirectional pins
 2018-03-06 14:27:19 +01:00
Sebastien Bourdeauducq 432e61bbb4 drtio: add kernel API to check for link status. Closes #941 2018-03-05 00:23:55 +08:00
Sebastien Bourdeauducq 928d5dc9b3 drtio: raise RTIOLinkError if operation fails due to link lost (#942) 2018-03-04 01:02:53 +08:00
Sebastien Bourdeauducq abfbadebb5 doc: DMA can also raise RTIOUnderflow 2018-03-03 13:14:34 +08:00
Robert Jördens cc70578f1f remove old spi RTIO Phy 2018-03-01 11:19:18 +01:00
Robert Jördens a7720d05cd firmware, sayma: port converter_spi to spi2 
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
 2018-03-01 11:19:18 +01:00
Robert Jördens 5046d6a529 ad9912/10: add a bit more slack to init() 2018-02-27 23:14:44 +01:00
Robert Jördens b466a569bf coredevice: export spi2 2018-02-24 09:49:31 +01:00
Robert Jördens cff85ee13b novogorny: simplify and fix coefficient 2018-02-23 10:09:44 +01:00
Robert Jördens bc5e949bb4 novogorny: fix gain register length 2018-02-22 18:45:55 +00:00
Robert Jördens 1452cd7447 novogorny: add coredevice driver and test with Kasli 
m-labs/artiq#687
 2018-02-22 17:19:51 +01:00
Robert Jördens 74517107f0 ad9912: add slack after prodid read 2018-02-22 17:19:51 +01:00
Robert Jördens e8d4db1ccf coreanalyzer: add spi2 support 
m-labs/artiq#926
 2018-02-22 11:28:46 +01:00
Robert Jördens f8e6b4f4e3 ad5360: port to spi2 
* kc705 nist_clock target gateware
* coredevice driver
* moninj code
* test/example/device_db

This is untested as we don't have a AD5360 board right now.
Will be tested with Zotino v1.1

m-labs/artiq#926
 2018-02-22 10:25:46 +01:00
Robert Jördens 898bad5abc spi2: fixes 2018-02-21 19:41:05 +01:00
Robert Jördens a63fd306af urukul: use spi2 
* switch kc705 and kasli targets to spi2 gateware on urukul
* rewrite urukul, ad9912, ad9910
* update example experiments, device_dbs
 2018-02-21 15:00:28 +00:00
Robert Jördens 37a0d6580b spi2: add RTIO gateware and coredevice driver 
1006218997
 2018-02-21 13:37:36 +00:00
Sebastien Bourdeauducq 4b4090518b drtio: clean up remnants of removed debug functions 2018-02-19 15:14:32 +08:00
Robert Jördens caedcd5a15 ad9912: cleanup, document init() 2018-02-18 11:38:16 +01:00
Robert Jördens 75c89422c9 ad991[02]: sysclk can be 1 GHz 2018-02-18 10:29:19 +00:00
Robert Jördens 2adba3ed33 urukul: document ad9912, and cpld, fix api 2018-02-14 09:45:17 +01:00
Robert Jördens ede98679fc ad9910: add documentation 2018-02-14 09:05:03 +01:00
Robert Jördens 7f1bfddeda ad9910: tweak spi timing for higher speed 2018-02-13 22:13:40 +01:00