22ce5b0299
eem: fix Urukul QSPI after 9ef5717de8
2021-02-12 10:59:53 +08:00
e54dd08821
metlino,sayma: adapt to new EEM API
...
This also enables 4X SERDES TTLs.
2021-02-10 15:32:10 +08:00
547254e89e
eem_7series: pass through kwargs
2021-02-10 15:31:49 +08:00
49299c00a9
eem: enable DCI for LVDS TTL
2021-02-10 15:31:25 +08:00
9ef5717de8
eem: support different I/O standards in EEM slots
2021-02-10 15:31:05 +08:00
461199b903
kasli_generic: warn if min_artiq_version is not met
2021-02-10 15:26:15 +08:00
cf9cf0ab6f
ttl_serdes_7series: add dci (HP bank) support
2021-02-07 22:32:18 +08:00
997a48fb31
ttl_serdes_ultrascale: fix, add dummy dci argument
2021-02-07 22:31:46 +08:00
bbe0c9162a
ttl_serdes_ultrascale: cleanup
2021-02-07 22:00:33 +08:00
3572e2a9c7
ttl_serdes_7series: fix
2021-02-07 21:41:13 +08:00
88c212b84f
ttl_serdes_7series: cleanup
2021-02-07 21:33:21 +08:00
db25f4e8f7
ttl_serdes_7series: use simpler I/O buffers
...
In theory equivalent with these parameters.
2021-02-07 20:10:37 +08:00
6bd9691ba8
gateware: remove TTL dead code
2021-02-07 19:58:02 +08:00
bfacd1e5b3
eem: fix Grabber cc_0-2 signal definitions
2021-02-07 18:01:05 +08:00
f7a33a1f99
gateware: make 7-series EEM handling functions shareable
2021-02-07 14:34:26 +08:00
a0fd5261ea
kc705: cleanup
2021-01-22 11:11:13 +08:00
7c4eed7a11
kc705: simplify DRTIO master & satellite
...
* KC705 master: user can no longer choose whether or not the SMA acts as the 2nd DRTIO channel; SFP and SMA now act as the 1st and 2nd channel respectively by default.
* KC705 satellite: user should now use `--sma` to enable using the SMA as the satellite channel; SFP acts as the satellite channel by default.
2021-01-22 11:11:13 +08:00
88b14082b6
drtio/transceiver/gtx: delete obsolete modules
2021-01-20 15:05:32 +08:00
9daf77bd58
kc705: add multichannel support on satellite
...
* Two DRTIO channels (i.e. satellite and repeater) are enabled by default.
* User can choose either the SFP or SMA as the satellite channel (by passing `--drtio-sat sfp` or --drtio-sat sma` to the argparser), and the unchosen would become the repeater channel.
2021-01-20 15:05:32 +08:00
52afd4ef6b
kc705: add GTX multilane support, add multichannel support on master
...
* One DRTIO master channel is enabled by default.
* User can set the SMA as the 2nd master channel (by passing --drtio-sma to the argparser).
* Multi-channel (i.e. with repeaters) on KC705 satellite is supported but has not been implemented yet.
2021-01-20 15:05:32 +08:00
f6d39fd6ba
kc705: revive DRTIO master with updated syntax
...
* KC705 master variant now uses Si5324 as synthesiser.
* Multi-channel has not been implemented yet.
2021-01-20 15:05:31 +08:00
f25e86e934
kc705: revive DRTIO satellite with updated syntax, update GTX
...
* Multi-channel has not been implemented yet.
2021-01-20 11:25:38 +08:00
c675488a99
reorganize JSON schema files
2021-01-16 10:43:14 +08:00
c6807f4594
kasli_generic: validate description against schema, use defaults from schema
2021-01-16 10:35:23 +08:00
45b5cfce05
gateware: add a kasli_generic.schema.json
2021-01-16 10:35:23 +08:00
cff7bcc122
Merge branch 'master' ( 43be383c86) into k7-drtio
2020-12-31 13:30:46 +08:00
dc7addf394
Revert "drtio: remove KC705/GTX support"
...
This reverts commit ebdbaaad32
2020-12-31 13:29:50 +08:00
43ecb3fea6
sayma: add comments about CPLL line rate on KU GTH
2020-12-19 17:05:20 +08:00
8cd794e9f4
jesd204_tools: use new syntax from jesd204b core
...
* requires jesd204b changes as in https://github.com/HarryMakes/jesd204b/tree/gth
2020-12-19 17:05:20 +08:00
ccdc741e73
sayma_amc: fix --sfp argument
2020-12-07 18:02:36 +08:00
ea95d91428
wrpll: separate collector reset
2020-11-09 17:57:13 +08:00
a9dd0a268c
Merge pull request #1533 from m-labs/phaser
...
Phaser
2020-10-19 09:30:12 +02:00
30d1acee9f
fastlink: fix fastino style link
2020-10-18 20:43:21 +00:00
d98357051c
add ref data
2020-10-18 20:43:21 +00:00
139385a571
fastlink: add fastino test
2020-10-18 17:11:09 +00:00
d185f1ac67
wrpll: fix mulshift (2)
2020-10-17 00:32:02 +08:00
3f076bf79b
wrpll: fix mulshift
2020-10-16 22:05:37 +08:00
hartytp
a058be2ede
wrpll: fix test_helper_collector
2020-10-08 19:43:12 +08:00
db62cf2abe
wrpll: convert tests to self-checking unittests
2020-10-08 18:38:01 +08:00
07d43b6e5f
wrpll: babysit Vivado DSP retiming
...
Design now passes timing.
2020-10-08 17:51:27 +08:00
7dfb4af682
kasli2: work around vivado clock constraint problem
2020-10-08 16:31:39 +08:00
96a5df0dc6
kasli2: add false path constraint for wrpll helper clock
2020-10-08 16:19:44 +08:00
6248970ef8
wrpll: clean up matlab comparison test
2020-10-08 15:40:15 +08:00
hartytp
cd8c2ce713
wrpll: add test to compare collector+filter against Matlab simulation
2020-10-08 15:36:56 +08:00
hartytp
d780faf4ac
wrpll.si549: initialize the clock divider to a sensible value
2020-10-08 15:32:27 +08:00
hartytp
7d7be6e711
wrpll.core: move collector into helper CD so we can get tags out while the filters are reset
2020-10-08 15:32:27 +08:00
3fa5d0b963
wrpll: clean up sign extension
2020-10-08 15:32:27 +08:00
hartytp
87911810d6
wrpll.core: add CSRs to monitor the collector outputs
2020-10-08 15:32:27 +08:00
hartytp
f2f942a8b4
wrpll.ddmtd: remove CSRs from DDMTD
...
We will gather then from the collector output so we can get all tags on the same cycle
2020-10-08 15:32:27 +08:00
hartytp
85bb641917
wrpll.ddmtd: fix first edge deglitcher
...
The blind counter should be held in reset whenever the input is high,
not just when there is a rising edge (otherwise the counter runs down
during the main pulse and can then re-trigger on jitter from the falling edge)
2020-10-08 15:32:27 +08:00
hartytp
f3cd0fc675
wrpll.filters: the helper clipping threshold is currently way too low. Move clipping after the bitshift to increase a bit.
...
TODO: think about this and pick a sensible threshold (and also think about integrator anti windup)
2020-10-08 15:32:27 +08:00
hartytp
e5e648bde1
wrpll: add bit shift for collector helper output
2020-10-08 15:32:27 +08:00
hartytp
c9ae406ac6
wrpll: change the DDMTD helper frequency to match CERN, improve docs
2020-10-08 15:32:27 +08:00
hartytp
f6f6045f1a
wrpll.thls: fix make
2020-10-08 15:32:27 +08:00
hartytp
b44b870452
wrpll.filters: update to match Weida's MatLab simulations
2020-10-08 15:32:27 +08:00
hartytp
e9ab434fa7
wrpll.core: update for modified collector
2020-10-08 15:32:27 +08:00
17c952b8fb
wrpll: style
2020-10-08 15:32:27 +08:00
hartytp
ebb7ccbfd1
wrpll: document DDMTD collector and fix unwrapping
2020-10-08 15:32:27 +08:00
50b4eb4840
Merge branch 'master' into phaser
...
* master: (26 commits)
fastino: documentation and eem pass-through
kasli2: forward sma_clkin to si5324
test: relax test_dma_playback_time on Zynq
rpc: fixed _write_bool
fastino: document/cleanup
build_soc: remove assertion that was used for test runs
metlino_sayma_ttl: Fix RTIO frequency & demo code (#1516 )
Revert "test: temporarily disable test_async_throughput"
build_soc: rename identifier_str to gateware_identifier_str
test: relax loopback gate timing
test: temporarily disable test_async_throughput
test: relax test_pulse_rate on Zynq
test: skip NonexistentI2CBus if I2C is not supported
build_soc: override identifier_str only for gateware
examples: add Metlino master, Sayma satellite with TTLOuts via FMC
sayma_amc: add support for 4x DIO output channels via FMC
fmcdio_vhdci_eem: fix pin naming
build_soc: add identifier_str override option
RPC: optimization by caching
test: improved test_performance
...
2020-09-22 16:02:25 +00:00
c55f2222dc
fastino: documentation and eem pass-through
...
* Repeat information about matching log2_width a few times
in the hope that people read it. #1518
* Pass through log2_width in kasli_generic json. close #1481
* Check DAC value range. #1518
2020-09-22 17:58:53 +02:00
29c940f4e3
kasli2: forward sma_clkin to si5324
2020-09-17 16:53:43 +08:00
868a9a1f0c
phaser: new multidds
2020-09-16 14:06:38 +00:00
c18f515bf9
phaser: rework rtio channels, sync_dly, init()
2020-09-16 12:23:07 +00:00
fdd2d6f2fb
phaser: SI methods
2020-09-12 11:02:37 +00:00
4e24700205
phaser: spelling
2020-09-09 16:52:52 +00:00
8aaeaa604e
phaser: share_lut
2020-09-07 16:06:35 +00:00
002a71dd8d
build_soc: rename identifier_str to gateware_identifier_str
2020-09-02 00:00:57 +08:00
dfbf3311cb
sayma_amc: add support for 4x DIO output channels via FMC
2020-08-31 16:21:45 +08:00
1ad9deaf91
fmcdio_vhdci_eem: fix pin naming
2020-08-31 16:21:45 +08:00
45ae6202c0
build_soc: add identifier_str override option
...
Signed-off-by: Stephan Maka <stephan@spaceboyz.net>
2020-08-31 11:48:58 +08:00
272dc5d36a
phaser: documentation
2020-08-28 16:36:44 +00:00
96fc248d7c
phaser: synchronize multidds to frame
2020-08-27 14:28:19 +00:00
c10ac2c92a
phaser: add trf, duc, interfaces, redo body assembly, use more natrual iq ordering (i lsb)
2020-08-27 14:26:09 +00:00
e5e2392240
phaser: wire up multidds
2020-08-26 17:12:41 +00:00
d1be1212ab
phaser: coredevice shim, dds [wip]
2020-08-26 15:10:50 +00:00
20fcfd95e9
phaser: coredevice shim, readback fix
2020-08-24 15:46:31 +00:00
bcefb06e19
phaser: ddb template, split crc
2020-08-24 14:51:50 +00:00
11c9def589
phaser: readback delay, test fastlink
2020-08-24 14:49:36 +00:00
63e4b95325
fastlink: rework crc injection
2020-08-23 19:41:13 +00:00
a27a03ab3c
fastlink: fix crc vs data width
2020-08-23 19:02:50 +00:00
7e584d0da1
fastino: use fastlink
2020-08-22 11:56:23 +00:00
3e99f1ce5a
phaser: refactor link
2020-08-22 11:56:23 +00:00
a34a647ec4
phaser: refactor fastlink
2020-08-22 11:56:23 +00:00
aa0154d8e2
phaser: initial
2020-08-22 11:56:23 +00:00
504f72a02c
rtio: remove legacy i_overflow_reset CSR
2020-08-06 17:52:32 +08:00
cw-mlabs
e4b16428f5
wrpll: fix run signal
2020-07-27 13:02:02 +08:00
cw-mlabs
8dd9a6d024
wrpll: fix scl signal
2020-07-27 12:59:32 +08:00
4340a5cfc1
rtio/dma: fix previous commit
2020-07-12 10:14:22 +08:00
f2e0d27334
rtio/dma: remove dead/broken code
2020-07-12 10:13:18 +08:00
901be75ba4
sayma_rtm: fix Si5324 reset
...
Closes #1483
2020-07-11 09:51:01 +08:00
2d1f1fff7f
kasli_generic: do not attempt to use SFP LED for RTIO on 2.0+
2020-07-08 18:14:44 +08:00
cb76f9da89
metlino: fix CSR collisions
...
Closes #1425
2020-05-29 15:59:44 +08:00
bd9eec15c0
metlino: increase number of DRTIO links
...
Seems OK with Vivado 2019.2.
2020-05-29 15:59:16 +08:00
d8b5bcf019
sayma_amc: support uTCA backplane for DRTIO
2020-05-29 14:58:49 +08:00
8b939b7cb3
sayma_amc: remove Master (obsoleted by Metlino)
2020-05-29 14:40:49 +08:00
4e9a529e5a
kasli: integrate WRPLL
2020-05-07 21:34:02 +08:00
60e5f1c18e
kasli: DRTIO support for Kasli 2
2020-05-07 20:09:43 +08:00
1f2182d4c7
kasli: default to hardware v2
2020-05-07 19:15:03 +08:00
b83afedf43
kasli: light up ERROR LED on panic
2020-05-07 19:06:10 +08:00
7e400a78f4
kasli: compile tester for hw 2.0 by default
2020-04-28 16:07:56 +08:00
3a7819704a
rtio: support direct 64-bit now CSR in KernelInitiator
2020-04-26 16:04:32 +08:00
d19f28fa84
kasli: v2 clocking WIP, remove SFP LEDs from RTIO
2020-04-23 23:02:18 +08:00
ea79ba4622
ttl_serdes: detect edges on short pulses
...
Edges on pulses shorter than the RTIO period were missed because the
reference sample and the last sample of the serdes word are the same.
This change enables detection of edges on pulses as short as the
serdes UI (and shorter as long as the pulse still hits a serdes sample
aperture).
In any RTIO period, only the leading event corresponding to the first
edge with slope according to sensitivity is registerd. If the channel is
sensitive to both rising and falling edges and if the pulse is contained
within an RTIO period, or if it is sensitive only to one edge slope and
there are multiple pulses in an RTIO period, only the leading event is
seen. Thus this possibility of lost events is still there. Only the
conditions under which loss occurs are reduced.
In testing with the kasli-ptb6 variant, this also improves resource
usage (a couple hundred LUT) and timing (0.1 ns WNS).
2020-04-13 13:21:03 +02:00
ec7b2bea12
sayma: round FTW like Urukul in JDCGSyncDDS
2020-04-08 15:00:33 +08:00
0f4be22274
sayma: add simple sychronized DDS for testing
2020-04-08 14:13:54 +08:00
61d4614b61
sayma: fix/cleanup DRTIO-DAC sync interaction
2020-04-06 22:34:05 +08:00
ffd3172e02
sayma: move SYSREF DDMTD to RTM ( #795 )
2020-04-06 00:01:28 +08:00
e803830b3b
fastino: support wide RTIO interface and channel groups
2020-03-05 17:55:04 +00:00
6d26def3ce
sayma: drive filtered_clk_sel on master variant
2020-02-06 22:28:49 +08:00
c7de1f2e6b
metlino: drive clock muxes
2020-02-05 00:06:34 +08:00
dfa033eb87
wrpll: new collector from Weida/Tom
2020-01-24 10:31:52 +08:00
dee16edb78
wrpll: DDMTD sampler double latching
2020-01-22 19:16:26 +08:00
248230a89e
fastino: style
2020-01-20 13:25:00 +01:00
2c4e5bfee4
fastino: add [WIP]
2020-01-20 13:25:00 +01:00
01a6e77d89
mirny: add
...
* This targets unrelease CPLD gateware (https://github.com/quartiq/mirny/issues/1 )
* includes initial coredevice driver, eem shims, and kasli_generic tooling
* addresses the ARTIQ side of #1130
* Register abstraction to be written
Signed-off-by: Robert Jördens <rj@quartiq.de>
2020-01-20 13:13:08 +01:00
6c3e71a83a
wrpll: cleanup
2020-01-18 09:43:43 +08:00
344f8bd12a
wrpll: collector patch from Weida
2020-01-18 09:42:58 +08:00
6c948c7726
sayma: RF switch control is active-low on Basemod, invert
2020-01-16 08:59:52 +08:00
50302d57c0
wrpll: more careful I2C timing
2020-01-14 20:03:46 +08:00
105dd60c78
wrpll: ADPLLProgrammer mini test bench and fixes
2020-01-14 16:52:25 +08:00
3242e9ec6c
wrpll: loop test
2020-01-13 22:31:57 +08:00
8ec0f2e717
wrpll: implement ADPLLProgrammer
2020-01-13 22:30:11 +08:00
d685619bcd
wrpll: collector code modifications from Weida
2020-01-13 20:42:41 +08:00
a666766f38
wrpll: add ADPLL offset registers
2019-12-30 22:19:42 +08:00
5c6e394928
ddmtd: add collector
2019-12-30 22:17:44 +08:00
f57f235dca
wrpll: new frequency meter
...
As per Mattermost discussion with Tom.
2019-12-30 19:47:57 +08:00
9e15ff7e6a
wrpll: improve DDMTD deglitcher
2019-12-30 16:56:06 +08:00
b7f1623197
sayma_rtm: connect attenuator shift registers in series
2019-12-20 18:58:31 +08:00
1c9cbe6285
sayma_rtm: add basemod attenuators on RTIO
2019-12-20 15:25:55 +08:00
6ee15fbcae
sayma_rtm: basemod RF switches
2019-12-18 10:33:29 +08:00
52112d54f9
kasli_generic: expose peripheral_processors dictionary. Closes #1403
2019-12-10 10:30:06 +08:00
150a02117c
sayma_rtm: drive clk_src_ext_sel
2019-12-09 19:47:50 +08:00
307a6ca140
gth_ultrascale: make OBUFDS_GTE3 work
...
https://www.xilinx.com/support/answers/67919.html
2019-12-09 18:13:22 +08:00
2b5213b013
wrpll: constrain clocks
2019-12-09 12:26:44 +08:00
05e2e1899a
wrpll: update OBUFDS_GTE2 comment
...
Seems O can fan out simultaneously to transceiver and fabric.
Kasli is using ODIV2 for no particular reason.
2019-12-09 11:58:54 +08:00
4148efd2ee
wrpll: implement filters and connect to Si549
2019-12-09 11:47:29 +08:00
d43fe644f0
wrpll: stabilize DDMTDSamplerGTP
2019-12-09 11:47:14 +08:00
0499f83580
wrpll: helper clock sanity check
2019-12-08 23:46:33 +08:00
46a776d06e
sayma: introduce WRPLL on RTM
2019-12-08 15:30:00 +08:00
883310d83e
sayma_rtm: si5324 -> cdrclkc
2019-12-08 14:26:05 +08:00
57a5bea43a
sayma_rtm: support setting RTIO frequency
2019-12-08 11:45:31 +08:00
da9237de53
wrpll: support differential DDMTD inputs
2019-12-07 18:18:57 +08:00
7098854b0f
wrpll: share DDMTD counter
2019-12-04 19:05:56 +08:00
05c5fed07d
suservo: stray comma
2019-12-03 08:38:07 +00:00
56074cfffa
suservo: support operating with one urukul
...
implemented by wiring up the second Urukul to dummy pins
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-12-02 11:30:20 +01:00
86e1924493
kasli_generic: support external reference on masters
2019-11-30 07:34:41 +00:00
eb271f383b
wrpll: add DDMTD cores
2019-11-28 22:03:50 +08:00
2e55e39ac7
wrpll: use spaces to indent
2019-11-28 17:40:25 +08:00
354d82cfe3
wrpll: drive helper clock domain
2019-11-28 17:40:00 +08:00
68cab5be8c
si549: cleanups
2019-11-28 16:36:59 +08:00
