srenblad
/
artiq
forked from M-Labs/artiq
1
0
Fork 0
Code Pull Requests Activity
6,182 Commits 63 Branches 34 Tags 19 MiB
Commit Graph

4918 Commits

Author SHA1 Message Date
whitequark d446a3293e frontend: merge core{config,log,boot,debug,profile} into coremgmt. 2018-05-16 14:08:32 +00:00
Florent Kermarrec f77bcbebb5 serwb/test_serwb_core: fix 2018-05-16 08:34:53 +02:00
Florent Kermarrec 77fc5c599f serwb/test: update 2018-05-15 23:52:58 +02:00
Florent Kermarrec 3873d09692 serwb: rewrite high-speed phys by splitting clocking/tx/rx, scrambling is now always enabled. 2018-05-15 23:52:41 +02:00
Florent Kermarrec f8a9dd930b serwb/genphy: add device parameter (not used here, but this way all the phys share the same parameters), scrambling is also now always enabled. 2018-05-15 23:51:14 +02:00
Florent Kermarrec 2c627cd061 serwb/scrambler: simplify and set scrambler input data to 0 when sink.stb == 0 2018-05-15 23:49:17 +02:00
Florent Kermarrec 7fe49a78d2 firmware/runtime/session: fix compilation when no rtio core 2018-05-15 23:47:47 +02:00
whitequark 8128a814f6 firmware: update dependencies. 2018-05-15 18:17:32 +00:00
whitequark 1b0384c513 firmware: fix satman build. 2018-05-15 16:35:05 +00:00
whitequark 07b713fdad firmware: use upstream log_buffer. 2018-05-15 15:19:20 +00:00
whitequark 9f5b76253c firmware: remove some unnecessary unwraps. 2018-05-15 15:05:19 +00:00
whitequark e5796e26e1 firmware: remove unused #![feature(untagged_unions)]. 2018-05-15 15:05:19 +00:00
whitequark b54926134c firmware: update the signature of #[lang="panic_fmt"]. 2018-05-15 15:05:19 +00:00
Florent Kermarrec c18a73d45f sayma_amc/rtm: use new serwb low-speed phy 2018-05-15 16:40:50 +02:00
Florent Kermarrec 913d1e8e12 serwb: add generic low-speed phy (125Mhz linerate, same phy for ultrascale/7-series) 2018-05-15 16:39:39 +02:00
Florent Kermarrec 520aade8fe serwb/scrambler: cleanup/fix potential bug 2018-05-15 16:30:52 +02:00
whitequark 9347f6e00c firmware: use a dedicated error type in the scheduler. 
After this commit, error handling does not normally allocate
(session::Error::{Load,Unexpected} still allocate, but those two
are very rare).

Good riddance to libstd_artiq.
 2018-05-15 14:19:44 +00:00
whitequark 479cb9a857 firmware: use dedicated error types for every protocol and thread. 
Good riddance to io::Error::Unrecognized.
 2018-05-15 13:27:23 +00:00
whitequark 514eab3d39 Update Rust to 1.26.0. 2018-05-15 12:47:51 +00:00
whitequark 26faaad2b7 firmware: remove io::Result<T, E> in favor of Result<T, impl Fail>. 
This doesn't yet use impl Fail since std_artiq::io::Error doesn't
impl it.
 2018-05-15 08:29:03 +00:00
whitequark 140ca729aa firmware: rename io::Error::{UnexpectedEof→UnexpectedEnd}. 
We don't even have files.
 2018-05-15 08:27:45 +00:00
whitequark ce0593315b firmware: move {ProtoRead,ProtoWrite} to the root of libio. 2018-05-15 08:16:09 +00:00
whitequark 4416c04ae1 firmware: use the failure crate in libio. 2018-05-15 07:40:13 +00:00
whitequark 9e8f8bb669 firmware: extract io::Cursor into its own file. 
Also remove unused io::CursorError.
 2018-05-15 06:24:04 +00:00
whitequark a4ab236af3 firmware: simplify some `use`s. 2018-05-14 19:24:14 +00:00
whitequark d93aa13fd6 firmware: use upstream compiler_builtins again. 
I've fixed i128 in LLVM, so there is no need in our fork anymore.
 2018-05-14 19:11:57 +00:00
whitequark 5ead27f2e1 firmware: eliminate uses of std_artiq::io::{Read,Write} from runtime. 2018-05-14 19:11:57 +00:00
whitequark cf33ba748d firmware: eliminate non-io uses of std_artiq from runtime. 
Just replace these with references to alloc.
 2018-05-14 19:11:57 +00:00
Robert Jördens a100c73dfe suservo: support pure-I 2018-05-14 18:48:27 +00:00
whitequark ae50196186 firmware: rename libproto to libproto_artiq. 
libproto_artiq only has ARTIQ-specific protocols.
 2018-05-14 18:09:44 +00:00
whitequark 02b8426f60 firmware: rename libboard to libboard_misoc. 
By analogy with libbuild_misoc. Hopefully one day it actually gets
moved to misoc...
 2018-05-14 18:09:44 +00:00
whitequark 1ff42683d9 firmware: merge libamp into libboard_artiq. 
All gateware interfaces live in libboard_artiq, but libamp predates
libboard_artiq.
 2018-05-14 17:33:25 +00:00
whitequark 764386c9e3 firmware: split libdrtioaux into libproto and libboard_artiq modules. 
All other protocol code lives in libproto, and all other gateware
interfaces live in libboard_artiq.
 2018-05-14 17:26:59 +00:00
whitequark 6a10d54432 firmware: migrate rpc_proto to new libio. 
This closes an old and horrible issue in that some code in ksupport
may implicitly try to allocate and we'll never know until it crashes
at runtime inside liballoc_stub.

This also removes liballoc_stub.
This also removes ReadExt and WriteExt from libproto.
Hooray!
 2018-05-14 17:26:59 +00:00
whitequark 9a1bd66d2c compiler: add test for int64(round(1.0)). 2018-05-14 15:57:27 +00:00
Sebastien Bourdeauducq e121a81f21 ad9914: fix frequency_to_xftw and xftw_to_frequency 2018-05-14 23:49:00 +08:00
Sebastien Bourdeauducq 80df86f700 ad9914: set_mu_x -> set_x_mu 2018-05-14 23:49:00 +08:00
whitequark 09617c9f5e firmware: migrate session_proto to new libio. 2018-05-14 15:17:32 +00:00
whitequark e9c88e32e6 firmware: migrate moninj_proto to new libio. 2018-05-14 15:17:32 +00:00
whitequark e292c8ab65 firmware: migrate mgmt_proto to new libio. 2018-05-14 15:17:32 +00:00
Robert Jördens 0c1caf0744 suservo: clean up and beautify example 2018-05-14 15:22:47 +02:00
Robert Jördens 4ddb29fa02 suservo: document class arguments 2018-05-14 15:22:47 +02:00
whitequark 976bb5e935 firmware: migrate analyzer_proto to new libio. 2018-05-14 12:51:59 +00:00
whitequark 2999756493 firmware: impl std_artiq::io::{Read,Write} for io::{Read,Write}. 2018-05-14 12:51:59 +00:00
whitequark bfc8fd0807 firmware: add io::Error::Unrecognized variant and use it in drtioaux. 2018-05-14 12:51:59 +00:00
Robert Jördens 504d37b66b suservo: add SI units functions and document 
m-labs/artiq#788
 2018-05-14 12:26:49 +00:00
Robert Jördens 4993ceec35 sampler: unroll conversion for speed 2018-05-14 12:26:49 +00:00
Robert Jördens d71e4e60a9 suservo: use addition for offset 2018-05-14 12:26:49 +00:00
Robert Jördens 27f975e7bb kasli: eem DifferentialInputs need DIFF_TERM 
cleanup some formatting on the way
 2018-05-14 12:26:49 +00:00
Robert Jördens 2a47b934ea suservo: remove adc return clock gating 2018-05-14 12:26:49 +00:00
Robert Jördens 74c0b4452b suservo: clkout and sdo[b-d] are inverted 2018-05-14 12:26:49 +00:00
Robert Jördens 04240cdc08 suservo: sampler channels are reversed 2018-05-14 12:25:09 +00:00
whitequark 7e299563df firmware: mark many functions in libio as #[inline]. 2018-05-14 11:22:56 +00:00
whitequark 368d6f9bfb satman: remove useless _Unwind_Resume. 2018-05-14 11:22:56 +00:00
whitequark 42420e094a satman: don't unwrap so much in process_aux_packet. 
This shrinks the code by almost 4K.
 2018-05-14 11:22:56 +00:00
Sebastien Bourdeauducq ba1d137d19 ad9914: fix FTW write in regular resolution mode 2018-05-14 18:47:23 +08:00
whitequark 56a29b91fc firmware: implement ConsoleLogger, use it in satman. 2018-05-14 10:45:11 +00:00
whitequark 5d43d457d2 satman: eliminate heap. 2018-05-14 10:05:02 +00:00
whitequark 46c8afc56c firmware: implement libio and use in in drtioaux. 2018-05-14 10:02:39 +00:00
whitequark d543c9aa63 firmware: backtrace_artiq → unwind_backtrace. 
This crate isn't ARTIQ-specific.
 2018-05-14 07:33:00 +00:00
Sebastien Bourdeauducq b04c7abde8 ad9914: fix kernel_invariants 2018-05-14 14:02:11 +08:00
Sebastien Bourdeauducq 56a18682a7 ad9914: minor fixes 2018-05-14 10:37:50 +08:00
Sebastien Bourdeauducq 194d6462ee ad9914: fix set_mu 2018-05-14 00:19:09 +08:00
hartytp 00cb31b804 sampler: remove v_ref parameter (#988) 2018-05-13 18:00:57 +02:00
Sebastien Bourdeauducq 3027951dd8 integrate new AD9914 driver 
moninj, analyzer, docs, examples, tests.
 2018-05-13 23:29:35 +08:00
Sebastien Bourdeauducq 663d8e66ba ad9914: optimize extended-resolution mode 2018-05-13 23:01:06 +08:00
Sebastien Bourdeauducq c8d91b297d coredevice: add new ad9914 driver 2018-05-13 22:30:33 +08:00
whitequark f383a470fe satman: do not debug print unexpected aux packets. 
This shrinks firmware by 2.8K.
 2018-05-13 13:43:39 +00:00
whitequark aa42a69849 libdrtioaux: always inline read/write helpers. 
This shrinks Packet::{read_from,write_to} by 1K.
 2018-05-13 13:39:14 +00:00
whitequark 32522be413 satman: use 1K log buffer and 4K stack. 
This reduces memory requirements in half.
 2018-05-13 13:28:00 +00:00
whitequark ee4c475cf3 gateware: fix Sayma satellite build. 
RTIO clock multiplier was removed from Sayma in 32f22f4c.
 2018-05-13 13:10:39 +00:00
Sebastien Bourdeauducq 8c1390e557 kasli: use 62.5MHz clock for siphaser reference (#999) 2018-05-12 22:58:03 +08:00
Sebastien Bourdeauducq 2426fea3f2 siphaser: support external reference for the freerunning 150MHz 2018-05-12 22:57:11 +08:00
Sebastien Bourdeauducq 6796413a53 serwb: remove unnecessary shebang line 2018-05-12 22:49:44 +08:00
Florent Kermarrec f5208ff2f3 serwb/core: reduce buffering, use buffered=True 2018-05-12 12:03:58 +02:00
Florent Kermarrec fdc953e569 serwb/etherbone: recuce buffering 2018-05-12 12:03:11 +02:00
Florent Kermarrec 6e67e6d0b1 serwb: revert some changes (was breaking simulation) 2018-05-12 11:59:46 +02:00
Florent Kermarrec 0a6d4ccd85 serwb/phy: improve/cleanup init 2018-05-12 01:35:34 +02:00
Florent Kermarrec b6ab59fb80 serwb/phy: increase timeout 2018-05-12 01:32:55 +02:00
Florent Kermarrec e09dbc89bc serwb: remove idelaye3 en_vtc (was not done correctly, we'll add direct software control) 2018-05-12 01:32:16 +02:00
Florent Kermarrec 6b4bbe31f7 firmware/ad9154: use fixed hmc7043 sysref phase (found with scan) 2018-05-12 00:12:59 +02:00
Florent Kermarrec 3c49eba0a0 firmware/hmc830_7043: put hmc7043 in sleep mode before hmc830 initialization 
hmc7043 seems to generate broadband noise when not initialized. This allows isolating issues. If hmc830 still does not always lock correctly, then this is not related to hmc7043 broadband noise.
 2018-05-12 00:06:49 +02:00
Florent Kermarrec cd4477864a serwb: fix case when rtm fpga is not loaded, lvds input can be 0 or 1 2018-05-11 23:31:25 +02:00
Sebastien Bourdeauducq 2e3bf8602f serwb: reduce buffering. Closes #997 2018-05-11 14:13:41 +08:00
Sebastien Bourdeauducq 2cece47b10 firmware/si5324: fix compilation warning 2018-05-09 20:00:08 +08:00
Sebastien Bourdeauducq 6b811c1a8b sayma: fix runtime/rtm gateware address conflict 2018-05-09 19:47:29 +08:00
Florent Kermarrec 9de08f85c6 firmware/ad9154: reduce verbosity of dac_sysref_cfg 2018-05-09 10:57:00 +02:00
Robert Jördens f055bf88f6 suservo: add clip flags (#992) 2018-05-09 07:16:15 +00:00
Florent Kermarrec 60fd362d57 serwb: fix rx_comma detection 2018-05-07 23:54:35 +02:00
Robert Jördens 7d4a103a43 opticlock, suservo: set default kasli hw_rev 2018-05-07 09:07:18 +02:00
whitequark c646409dbe firmware: fix order of bits clocked into hmc542. 
Fixes #993.
 2018-05-05 03:12:25 +00:00
whitequark 917a4185eb Unbreak 9dc7efef. 2018-05-05 03:00:30 +00:00
whitequark fd2b8d5f8f firmware: raise hmc542 log level to INFO. 2018-05-05 02:59:49 +00:00
whitequark a148729bf8 artiq_flash, artiq_devtool: add support for ssh -J option. 2018-05-05 02:50:01 +00:00
whitequark 9704fb837f firmware: fix warnings in ad9154 driver. 2018-05-05 01:55:42 +00:00
whitequark 8a70c18d1e firmware: add debug output to hmc542 driver. 2018-05-05 01:53:30 +00:00
whitequark 68ef09ed73 firmware: stop profiler before rebooting too. 2018-05-05 01:52:44 +00:00
whitequark 9dc7efefe4 compiler: transparently handle Windows newlines in RunTool. 2018-05-05 01:43:00 +00:00
whitequark 4f29d9134f firmware: update log_buffer. 
Fixes #986.
 2018-05-05 01:18:59 +00:00
whitequark 5ebc626cf4 artiq_coreprofile: fix an inverted option. 2018-05-05 00:49:42 +00:00
whitequark b1d349cc1b firmware: implement a sampling profiler. 
Does not yet support constructing call graphs.
 2018-05-05 00:44:40 +00:00
whitequark 9857dfcd7d firmware: add irq::Exception to libboard. 2018-05-04 18:41:03 +00:00
Sebastien Bourdeauducq 0b4d06c7a9 worker: keep sys.modules untouched until the end of examine() 2018-05-02 12:50:37 +08:00
Sebastien Bourdeauducq 8079aa6d20 worker: python docs recommend not replacing sys.modules 2018-05-02 12:48:50 +08:00
Sebastien Bourdeauducq 8c69d939fb worker: restore sys.modules in examine() (#976) 2018-05-02 12:32:35 +08:00
Sebastien Bourdeauducq 8d66d53e06 Revert "tools/file_import: restore sys.modules. Closes #976" 
This reverts commit b48e782dd6.
 2018-05-02 12:14:56 +08:00
Sebastien Bourdeauducq 5f0cfadb30 rtio/sed: add unittest for sequence number rollover 2018-05-02 12:04:30 +08:00
Sebastien Bourdeauducq 4120105e3a rtio/sed: fix output network cmp_wrap 2018-05-02 12:04:03 +08:00
Sebastien Bourdeauducq bce8fa3ec5 rtio/sed: add replace unittest at the top level (#978) 2018-05-02 10:58:18 +08:00
Sebastien Bourdeauducq 83fb431cd0 rtio/sed: pass sequence numbers through the FIFOs. Closes #978 2018-05-02 10:57:57 +08:00
Florent Kermarrec 05955bfd79 sayma_rtm: use bufio for sys4x (needed since we are using a -1 speedgrade) 2018-05-01 22:16:35 +02:00
Sebastien Bourdeauducq b48e782dd6 tools/file_import: restore sys.modules. Closes #976 2018-05-01 22:15:47 +08:00
Florent Kermarrec 84e1f05559 sayma_rtm: make cd_sys4x clock domain reset_less 2018-05-01 16:11:26 +02:00
whitequark 623614f835 Update LLVM to 6.0.0 and Rust to 1.25.0. 2018-05-01 08:57:37 +00:00
Florent Kermarrec 64c8eee28d serwb/phy/master: fix slave ready detection by filtering possible glitches on rx data (seems to happen when RTM fpga is not loaded) 2018-04-30 23:59:56 +02:00
Robert Jördens 5a683ddd1f Revert "kasli: force hw_rev for the different targets" 
This reverts commit 17d7d7856a.

Would require filtering it in misoc or better
removing the argparse option.
 2018-04-28 23:24:41 +02:00
Robert Jördens 17d7d7856a kasli: force hw_rev for the different targets 2018-04-28 21:30:29 +02:00
whitequark f7e08ec46b Unbreak f35f1001. 2018-04-28 01:03:08 +00:00
whitequark f35f100110 compiler: don't crash printing locations of specialized functions. 
Fixes #987.
 2018-04-28 00:49:25 +00:00
Robert Jördens 8812824fb2 suservo: speed up example, interlock mem 2018-04-27 17:17:17 +00:00
Robert Jördens ae80bab180 urukul: reg based io-update is a kernel 2018-04-27 16:42:09 +00:00
Robert Jördens 5d3c76fd50 sayma_rtm: use bitstream opts in migen 2018-04-27 15:43:32 +00:00
Robert Jördens 5f00326c65 suservo: coeff mem write port READ_FIRST 2018-04-27 15:43:32 +00:00
Robert Jördens 73fa572275 suservo: documentation, small API changes 2018-04-27 16:53:22 +02:00
Florent Kermarrec 4e2d9abaf7 firmware/ad9154: combine analog and digital delay of hmc7043 for sysref scan 2018-04-27 14:32:03 +02:00
Robert Jördens fe9834bac4 suservo: update 'technology preview' example [wip] 
Still with mostly undocumented and unstable API.
 2018-04-27 12:04:17 +00:00
Robert Jördens 307cd07b9d suservo: lots of gateware/ runtime changes 
tested/validated:

* servo enable/disable
* dds interface, timing, io_update, mask_nu
* channel control (en_out, en_iir, profile)
* profile configuration (coefficients, delays, offsets, channel)
* adc timings and waveforms measured
* asf state readback
* adc readback

individual changes below:

suservo: correct rtio readback

suservo: example, device_db [wip]

suservo: change rtio channel layout

suservo: mem ports in rio domain

suservo: sck clocked from rio_phy

suservo: cleanup, straighten out timing

suservo: dds cs polarity

suservo: simplify pipeline

suservo: drop unused eem names

suservo: decouple adc SR from IIR

suservo: expand coredevice layer

suservo: start the correct stage

suservo: actually load ctrl

suservo: refactor/tweak adc timing

suservo: implement cpld and dds init
 2018-04-27 13:50:26 +02:00
Robert Jördens 01f762a8f5 urukul/ad9910: support blind init 
urukul: always set io_update attribute
to silence compiler warning w.r.t. kernel_invariants
 2018-04-27 13:48:40 +02:00
Florent Kermarrec 3802c7badb firmware/ad9154: add sysref scan/conf for jesd sc1 2018-04-27 13:20:20 +02:00
Florent Kermarrec 8212e46f5e sayma_amc: filter jesd refclk/sysref with jreset (hmc7043 can generate noise when unconfigured see sinara issue #541) 2018-04-27 13:04:37 +02:00
Robert Jördens edbc7763e0 urukul: allow no io_update_device 2018-04-25 17:32:36 +00:00
Robert Jördens 8a1151b54f suservo: example device db 2018-04-25 17:14:25 +00:00
Robert Jördens f9b2c32739 suservo: add pgia spi channel 2018-04-25 17:14:25 +00:00
Robert Jördens c83305065a suservo: add servo/config/status register 2018-04-25 15:59:06 +00:00
Robert Jördens 105068ad90 suservo: fix restart timing 2018-04-25 15:19:49 +00:00
Robert Jördens c304b6207a suservo: drop adc idelays 2018-04-25 14:59:50 +00:00
Robert Jördens b44d6517d1 suservo: use 125 MHz SDR ADC 
* easier timing
* natural sampling on rising edge
* timing, signal robustness
* adjust the servo iteration timing
 2018-04-25 14:32:23 +00:00
Robert Jördens 37c186a0fc suservo: refactor, constrain 
* remove DiffMixin, move pad layout handling to pads
* add input delay constraints, IDELAYs
 2018-04-25 13:44:52 +00:00
Robert Jördens d0258b9b2d suservo: set input delays 2018-04-24 15:30:25 +00:00
Robert Jördens fe75064c1e suservo: cleanup rtio interface 2018-04-24 13:08:40 +00:00
Robert Jördens 3942c2d274 suservo: fix clkout cd drive 2018-04-24 10:18:32 +00:00
Robert Jördens f74998a5e0 suservo: move arch logic to top, fix tests 2018-04-23 21:11:26 +00:00
Robert Jördens 4903eb074c suservo: use BUFIO/BUFH for ADC 2018-04-23 18:30:19 +00:00
Robert Jördens e36deab0a8 suservo/adc: try to help vivado extract srls 2018-04-23 18:30:19 +00:00
Robert Jördens 929ed4471b kasli/SUServo: use suservo, implement urukul_qspi 
m-labs/artiq#788
 2018-04-23 18:30:18 +00:00
Robert Jördens 4c1e356f67 suservo: add pads rewiring layer for eems 2018-04-23 18:30:18 +00:00
Robert Jördens 99dd9c7a2a suservo: fix rtio interface width 2018-04-23 18:30:18 +00:00
Robert Jördens d5eea962ec suservo: fix cnv_b diff 2018-04-23 18:30:12 +00:00
Robert Jördens c8fd63754a suservo: add unittests 
m-labs/artiq#788
 2018-04-23 18:25:59 +00:00
Robert Jördens 934c41b90a gateware: add suservo 
from
fe4b60b902

m-labs/artiq#788
 2018-04-23 18:24:59 +00:00
Sebastien Bourdeauducq 4fe09fddd5 examples/kc705_nist_clock: update to new ad53xx driver 2018-04-22 15:03:30 +08:00
Sebastien Bourdeauducq c47d3ec8c8 zotino: use None as default for ldac and clr 
This is also what AD53xx does.
 2018-04-22 15:03:01 +08:00
Sebastien Bourdeauducq d2d02ae353 artiq_coredebug: fix permissions 2018-04-22 15:02:17 +08:00
whitequark 3b054855ec firmware: add allocator debug feature, invoked by artiq_coredebug frontend. 2018-04-21 19:39:46 +00:00
whitequark 873324d52b firmware: don't truncate queued RPCs (fixes #985). 2018-04-21 19:39:46 +00:00
whitequark 58967f14fd compiler: do not try to re-coerce fully coerced numerics. 2018-04-21 18:25:52 +00:00
whitequark 742e273441 Commit missing part of b4e3c30d. 2018-04-20 15:27:27 +00:00
whitequark 0d5fd1e83d runtime: fix race condition in log extraction code paths (#979). 
The core device used to panic if certain combinations of borrows
of the log buffer happened. Now they all use .try_borrow_mut().
 2018-04-20 15:26:00 +00:00
whitequark b4e3c30d8c compiler: desugar x != y into not x == y (fixes #974). 2018-04-20 12:20:45 +00:00
Florent Kermarrec fe689ab4f2 firmware/serwb: add link test, use info! instead of debug! for link settings (useful to analyze logs from others boards) 2018-04-17 19:24:22 +02:00
Florent Kermarrec 439d2bf2bc sayma/serwb: adapt, full reset of rtm on link reset 2018-04-17 19:24:03 +02:00
Florent Kermarrec 8edf4541d6 serwb: adapt test 2018-04-17 19:21:53 +02:00
Florent Kermarrec 20ccc9d82f serwb/core/phy: move scrambler in phy, add link test, revert delay min/max checks 2018-04-17 19:21:21 +02:00
Florent Kermarrec ebfac36223 serwb/scrambler: dynamic enable/disable 2018-04-17 19:20:06 +02:00
Florent Kermarrec 816a6f2ec7 serwb/phys: remove phy_width (revert linerate to 1Gbps) 2018-04-17 19:19:18 +02:00
Sebastien Bourdeauducq 48b48e44dd kasli/mitll: fix demo 2018-04-17 20:15:38 +08:00
Sebastien Bourdeauducq 79f4892e22 kasli/mitll: fix RTIO channel numbers 2018-04-17 20:15:17 +08:00
Sebastien Bourdeauducq eac447278f kasli: add MITLL variant 2018-04-17 19:00:11 +08:00
Sebastien Bourdeauducq 756e120c27 kasli/sysu: add comments 2018-04-17 18:46:55 +08:00
Florent Kermarrec 1acd7ea1db sayma/serwb: re-enable scrambling 2018-04-17 00:49:36 +02:00
Florent Kermarrec ca01c8f1cb sayma: reduce serwb linerate to 500Mbps 2018-04-16 23:19:15 +02:00
Florent Kermarrec 825a2158ba serwb: add phy_width parameter to allow reducing linerate to 500Mbps or 250Mbps 2018-04-16 23:19:14 +02:00
Florent Kermarrec bb90fb7d59 sayma/serwb: remove scrambling (does not seems to work on sayma for now...) 2018-04-07 15:57:57 +02:00
Florent Kermarrec 6aa8e2c433 serwb/test: replace valid/ready with stb/ack 2018-04-07 15:55:57 +02:00
Florent Kermarrec 73dbc0b6b6 serwb/test: adapt to new version 2018-04-07 15:09:29 +02:00
Florent Kermarrec e15f8aa903 sayma/serwb: enable scrambling 2018-04-07 14:52:37 +02:00
Florent Kermarrec 9d0e8c27ff serwb/scrambler: add flow control 2018-04-07 14:51:17 +02:00
Florent Kermarrec 2f8bd022f7 sayma_rtm: remove sys0p2x clock 2018-04-07 03:10:34 +02:00
Florent Kermarrec 1fd96eb0fd serwb: replace valid/ready with stb/ack 2018-04-07 03:06:19 +02:00
Florent Kermarrec c8a08375f8 serwb: replace valid/ready with stb/ack 2018-04-07 03:03:44 +02:00
Florent Kermarrec 73b727cade serwb: new version using only sys/sys4x clocks domains, scrambling deactivated. 2018-04-07 02:59:14 +02:00
Florent Kermarrec dd21c07b85 targets/sayma_rtm: fix serwb 2 ... 2018-04-03 18:59:05 +02:00
Florent Kermarrec 7488703f23 targets/sayma_rtm: fix serwb 2018-04-03 18:57:00 +02:00
Florent Kermarrec aef0153a8f targets/sayma: adapt to new serwb clocking 2018-04-03 18:53:39 +02:00
Florent Kermarrec 3248caa184 gateware/serwb: move all clocking outside of serwb, use existing sys/sys4x clocks 2018-04-03 18:48:08 +02:00
Sebastien Bourdeauducq f0771765c1 rtio: move CRI write comment to more appropriate location 2018-03-29 23:55:00 +08:00
Sebastien Bourdeauducq 493d2a653f siphaser: add false path between sys_clk and mmcm_freerun_output 2018-03-29 10:55:41 +08:00
Sebastien Bourdeauducq 4229c045f4 kasli: fix DRTIO master clock constraint 2018-03-29 10:20:31 +08:00
Sebastien Bourdeauducq 3d89ba2e11 sayma: remove debug leftover 2018-03-29 10:20:17 +08:00
Sebastien Bourdeauducq 605292535c kasli: ignore OSERDESE2->ISERDESE2 timing path on DRTIO targets as well 2018-03-29 10:12:02 +08:00
Sebastien Bourdeauducq 416232cb64 runtime: do not reset RTIO PHY on core.reset(). Closes #971 2018-03-28 10:51:07 +08:00
Sebastien Bourdeauducq 5ca59467fd ad53xx: make LDAC and CLR optional 2018-03-26 22:45:01 +08:00
whitequark bab6723ff2 Revert "gateware: don't run tests if there is no migen." 
This reverts commit 4804cfef9b.
 2018-03-26 03:33:52 +00:00
whitequark 4804cfef9b gateware: don't run tests if there is no migen. 
This allows us to skip testing gateware on Windows.
 2018-03-26 03:26:34 +00:00
whitequark 87c2f119a5 artiq_devtool: add load action. 2018-03-25 20:29:51 +00:00
Sebastien Bourdeauducq 8d62ea2288 examples: fix KC705 ad53xx 2018-03-25 11:19:54 +08:00
Sebastien Bourdeauducq c3f763e217 dashboard: also create monitoring widgets for the Zotino class 2018-03-25 11:19:40 +08:00
Robert Jördens a20dfd9c00 examples/master: ad5360 -> zotino 2018-03-24 16:46:59 +01:00
Robert Jördens 0505e9124f kc705: port device_db, ad53xx/zotino example 2018-03-24 16:05:26 +01:00
Robert Jördens 3a0dfb7fdc ad53xx: port monitor, moninj dashboard, kc705 target 2018-03-24 16:04:02 +01:00
Robert Jördens a8f0ee1c86 ad53xx: refactor offset_to_mu(), fix docs 2018-03-24 15:45:42 +01:00
Robert Jördens b0c8097025 ad53xx: remove channel index AND 
It's incorrect since it doesn't respect the number of channels
of any of those chips (none has 64 channels).
 2018-03-24 15:39:06 +01:00
Robert Jördens 77bcc2c78f zotino: style, use attributes to set SPI config 2018-03-24 15:37:34 +01:00
Robert Jördens 2cf414a480 ad53xx: move 8 bit shift out of ad53xx protocol funcs 
That's specific to the SPI bus, not to the ad53xx.
 2018-03-24 15:15:56 +01:00
Robert Jördens 08326c5727 ad53xx: style [nfc] 2018-03-24 14:10:20 +01:00
Robert Jördens 68e433a3a8 opticlock/device_db: resurrect novogorny 
deleted in a992a67
 2018-03-24 13:46:45 +01:00
hartytp a992a672d9 coredevice/zotino: add (#969) 
* Replace ad5360 driver with a ad53xx driver, designed to have a nicer interface
Add Zotino driver and add to opticlock target for Kasli
Test Zotino on hw:
 - Verify all timings on the hardware with a scope
 - Verify that we can correctly set and read back all registers in a loop (checks for SI and driver issues)
 - check we can set LEDs correctly
 - check calibration routine + all si unit functions with a good DVM
 - look at DAC transitions on a scope (while triggering of a TTL) on persist to check there are no LDAC glitches etc
To do: update examples and e.g. KC705 device db.
 2018-03-24 13:41:18 +01:00
Robert Jördens 1553fc8c7d sed: reset `valid` in output sorter 2018-03-23 11:11:11 +00:00
Sebastien Bourdeauducq 0635907699 artiq_flash: fix cmdline formatting 2018-03-22 19:10:29 +08:00
Sebastien Bourdeauducq 46d5af31a1 artiq_flash: enclose filename in curly braces before passing to OpenOCD 
Closes #927
 2018-03-22 17:20:48 +08:00
Sebastien Bourdeauducq eeedcfbdd7 artiq_flash: do not suppress useful backtrace information 2018-03-22 17:11:21 +08:00
Sebastien Bourdeauducq f2cc2a5ff2 firmware: reset local RTIO PHYs on startup (#958) 2018-03-22 16:29:31 +08:00
Robert Jördens 770b0a7b79 novogorny: conv -> cnv 
* parity with sampler
* also add novogorny device to opticlock
 2018-03-21 18:38:42 +00:00
Robert Jördens 82c4f0eed4 sampler: fix channel gain retrieval 2018-03-21 14:22:13 +01:00
Robert Jördens 12d699f2a8 suservo: add sampler example 2018-03-21 12:21:53 +00:00
Robert Jördens 97918447a3 sampler: add coredevice driver 2018-03-21 12:21:53 +00:00
Robert Jördens 1afce8c613 kasli: simplify single eem pin formatting 2018-03-21 13:08:42 +01:00
Robert Jördens d48b8f3086 kasli: fix sampler sdr/cnv pins 2018-03-21 09:28:00 +00:00
Robert Jördens 80903cead7 novogorny: streamline gain setting method, style [nfc] 2018-03-21 08:53:26 +00:00
Robert Jördens f5a1001114 suservo: add device database and artiq_flash variant 2018-03-21 08:53:26 +00:00
Robert Jördens 1fb5907362 kasli: add SUServo variant (Sampler-Urukul Servo) 2018-03-21 08:53:26 +00:00
Robert Jördens f74d5772f4 sampler: add wide eem definition 2018-03-21 08:53:26 +00:00
Sebastien Bourdeauducq 32f22f4c9c sayma: disable SERDES TTL entirely 
Timing closure becomes very random, even at 4X.
 2018-03-21 13:03:48 +08:00
Sebastien Bourdeauducq f8c2d54e75 ttl_serdes_ultrascale: configurable SERDES ratio. Also try X4 on Sayma 2018-03-21 13:01:38 +08:00
Sebastien Bourdeauducq 9c2d343052 sayma: use SERDES RTIO TTL 
This is not enabled on the standalone design as it breaks timing.
 2018-03-21 10:53:52 +08:00
Robert Jördens 9ad1fd8f25 urukul: add comment and doc about the AD9910 MASTER_RESET 2018-03-20 17:40:03 +01:00
Robert Jördens f17c0abfe4 urukul: don't pulse DDS_RST on init 
closes m-labs/artiq#940

Apparently, if the DDS are reset, every other time they don't work
properly.
 2018-03-20 16:10:26 +00:00
Robert Jördens a185e8dc52 urukul: fix MASK_NU offset 2018-03-20 16:10:11 +00:00
Robert Jördens f4719ae24b sdram: clean up console output 2018-03-20 15:42:49 +01:00
Robert Jördens 206664afd9 sdram: compact read_level output 2018-03-20 10:16:05 +00:00
Robert Jördens 495625b99d bootloader: repeat memory test 4 times 2018-03-20 09:57:49 +00:00
Robert Jördens 6fb0cbfcd3 sdram: clean up, make read_level robust to wrap around 
* fix a few rust warnings
* also do eye scans on kintex
 2018-03-20 09:57:49 +00:00
Robert Jördens 3abb378fbe i2c: unused variable 2018-03-20 09:56:26 +00:00
Sebastien Bourdeauducq c8020f6bbd ttl_serdes_generic: fix/upgrade test 2018-03-20 16:46:57 +08:00
Sebastien Bourdeauducq a5825184b7 add ttl_serdes_ultrascale (untested) 2018-03-20 16:07:23 +08:00
Sebastien Bourdeauducq fad066f1aa ttl_serdes_7series: cleanup indentation 
Inconsistent with other code and confuses text editors.
 2018-03-20 15:50:04 +08:00
Robert Jördens 276b0c7f06 sdram: reject read delay wrap arounds 2018-03-20 00:28:41 +01:00
Robert Jördens 4b3f408143 sdram: simplify read level scan 2018-03-19 18:41:56 +00:00
Robert Jördens 845784c180 kusddrphy: use first and last tap that yield many valid reads 2018-03-19 17:54:26 +00:00
Robert Jördens ed2e0c8b34 sayma/sdram/scan: test each tap 1024 times 2018-03-20 00:59:31 +08:00
hartytp a27b5d88c2 Novogorny driver, remove unused imports (#964) 
* Novogorny driver, remove unused imports

* more unused imports

* oops, one final one!
 2018-03-19 11:58:14 +01:00
Robert Jördens 7a7ff6d2dd
Merge pull request #963 from hartytp/kasli_zotino_sampler 
Add Zotino and Sampler functions to Kasli. Add Zotino to Kasli EEM 7 …
 2018-03-19 10:52:50 +01:00
Thomas Harty 37d431039d Fix typos. 
Reduce ififo depth to 4 for Zotino.
 2018-03-19 09:42:18 +00:00
whitequark c86df8e13e firmware: try to unstuck the I2C bus if it gets stuck. 
Fixes #957.
 2018-03-19 06:23:23 +00:00
Thomas Harty c4fa44bc62 Add Zotino and Sampler functions to Kasli. Add Zotino to Kasli EEM 7 on OptiClock. 2018-03-18 00:25:43 +00:00
Robert Jördens f39b7b33e8 ad5360: whitespace [nfc] 2018-03-17 18:51:17 +01:00
ion c1439bfd3b Fix AD5360 after migration to SPI2 2018-03-17 11:37:11 +00:00
whitequark 4b5a78e231 compiler: do not pass files to external tools while they are opened. 
This fixes access violations on Windows that are present both with
input and output files. For some reason, Cygwin-compiled binutils
did not exhibit this problem, but MSYS-compiled binutils do.

Fixes #961.
 2018-03-15 22:21:29 +00:00
whitequark 5cb2602021 artiq_devtool: flash gateware if -g is passed. 2018-03-15 08:33:53 +00:00
whitequark 9ea7d7a804 firmware: allow building without system UART. 2018-03-14 18:34:31 +00:00
whitequark 158ceb0881 artiq_devtool: add kasli target. 2018-03-14 18:13:13 +00:00
Sebastien Bourdeauducq a315ecd10b rtio/ttl_serdes_7series: reset IOSERDES (#958) 2018-03-14 09:01:29 +08:00
Robert Jördens 2fdc180601 dsp/fir: outputs reset_less (pipelined) 2018-03-13 17:11:50 +00:00
Sebastien Bourdeauducq 2edf65f57b drtio: fix satellite minimum_coarse_timestamp clock domain (#947) 2018-03-13 00:20:57 +08:00
Sebastien Bourdeauducq 999ec40e79 bootloader: print gateware ident 2018-03-13 00:11:25 +08:00
Sebastien Bourdeauducq 2caeea6f25 update copyright year 2018-03-13 00:09:13 +08:00
Sebastien Bourdeauducq 1d081ed6c2 drtio: print diagnostic info on satellite write underflow (#947) 2018-03-12 23:41:19 +08:00
Florent Kermarrec eb6e59b44c sayma_rtm: fix serwb timing constraints (was causing the gated clock warning) 2018-03-12 11:25:29 +01:00
Chris Ballance 6dfebd54dd ttl_serdes_7series: use correct IBUFDS_INTERMDISABLE port names 2018-03-12 10:37:33 +08:00
Robert Jördens a04bd5a4fd spi2: xfers take one more cycle until ~busy 2018-03-09 20:48:17 +01:00
Florent Kermarrec 5af4609053 libboard/sdram: limit write leveling scan to "512 - initial dqs taps delay" on ultrascale 2018-03-09 19:06:47 +01:00
Florent Kermarrec a95cd423cc libboard/sdram: add gap for write leveling 2018-03-09 18:53:57 +01:00
Sebastien Bourdeauducq fc3d97f1f7 drtio: remove spurious multichannel transceiver clock constraints 
They used to cause (otherwise harmless) Vivado critical warnings.
 2018-03-09 22:46:27 +08:00
Sebastien Bourdeauducq caf7b14b55 kasli: generate fine RTIO clock in DRTIO targets, separate RTIO channel code 2018-03-09 22:36:16 +08:00
Florent Kermarrec 8f6f83029c libboard/sdram: add write/read leveling scan 2018-03-09 13:50:51 +01:00
Florent Kermarrec b0b13be23b libboard/sdram: rename read_delays to read_leveling 2018-03-09 09:23:20 +01:00
Sebastien Bourdeauducq 3fbcf5f303 drtio: remove TSC correction (#40) 2018-03-09 10:36:17 +08:00
Sebastien Bourdeauducq e38187c760 drtio: increase default underflow margin. Closes #947 2018-03-09 00:49:24 +08:00
Sebastien Bourdeauducq 37f5f0d38d examples: add DMA to Sayma DRTIO 2018-03-09 00:49:24 +08:00
Florent Kermarrec 8475c21c46 firmware/libboard/sdram: kusddrphy now use time mode for odelaye3/idelaye3, now reloading dqs delay_value (500ps) with software 2018-03-08 10:00:00 +01:00
Sebastien Bourdeauducq 8bd15d36c4 drtio: fix error CSR edge detection (#947) 2018-03-08 16:28:25 +08:00
Sebastien Bourdeauducq 0adbbd8ede drtio: reset aux packet gateware after locking to recovered clock 
Closes #949
 2018-03-08 15:41:13 +08:00
Sebastien Bourdeauducq 8bd85caafb examples: fix Sayma DRTIO ref_period 2018-03-08 15:09:33 +08:00
Robert Jördens 37ec97eb28 ad9910/2: add sw invariant only when passed 2018-03-07 21:32:59 +01:00
Robert Jördens 82831a85b6 kasli/opticlock: add eem6 phys 2018-03-07 21:32:59 +01:00
Robert Jördens 3a6566f949 rtio: judicious spray with reset_less=True 
Hoping to reduce rst routing difficulty and easier RTIO timing closure.
 2018-03-07 14:57:18 +00:00
Robert Jördens b0282fa855 spi2: reset configuration in rio_phy 2018-03-07 14:42:11 +00:00
Robert Jördens 7afb23e8be runtime: demote dropped and malformed packets msgs to debug 2018-03-07 14:28:21 +01:00
Robert Jördens 4af7600b2d Revert "LaneDistributor: try equivalent spread logic" 
This reverts commit 8b70db5f17.

Just a shot into the dark.
 2018-03-07 11:34:51 +00:00
Robert Jördens a6d1b030c1 RTIO: use TS counter in the correct CD 
artiq/m-labs#938
 2018-03-07 11:34:42 +00:00
Robert Jördens 8b70db5f17 LaneDistributor: try equivalent spread logic 2018-03-07 11:34:42 +00:00
Robert Jördens 2cbd597416 LaneDistributor: style and signal consolidation [NFC] 2018-03-07 11:34:42 +00:00
Sebastien Bourdeauducq 916197c4d7 siphaser: cleanup 2018-03-07 11:15:44 +08:00
Sebastien Bourdeauducq 74d1df3ff0 firmware: implement si5324 skew calibration 2018-03-07 10:57:30 +08:00
Sebastien Bourdeauducq f7aba6b570 siphaser: fix phase_shift_done CSR 2018-03-07 10:57:30 +08:00
Sebastien Bourdeauducq acfd9db185 siphaser: minor cleanup 2018-03-07 10:57:30 +08:00
Sebastien Bourdeauducq e6e5236ce2 firmware: fix si5324 select_recovered_clock 2018-03-07 10:57:30 +08:00
Sebastien Bourdeauducq 7d98864b31 sayma: enable siphaser 2018-03-07 10:57:30 +08:00
Sebastien Bourdeauducq c2d2cc2d72 runtime: fix setup_si5324_as_synthesizer 2018-03-07 10:57:30 +08:00
Sebastien Bourdeauducq a6e29462a8 sayma: enable multilink DRTIO 2018-03-07 10:57:30 +08:00
Sebastien Bourdeauducq c34d00cbc9 drtio: implement Si5324 phaser gateware and partial firmware support 2018-03-07 10:57:30 +08:00
Robert Jördens 994ceca9ff sayma_amc: disable slave fpga gateware loading 2018-03-06 17:27:43 +01:00
Robert Jördens f4dad87fd9 coredevice: add pcf8574a driver 
I2C IO expander with 8 quasi-bidirectional pins
 2018-03-06 14:27:19 +01:00
Robert Jördens 62af7fe2ac Revert "kasli/opticlock: use plain ttls for channels 8-23" 
This reverts commit bd5c222569eb68d624a5ac1e9f2542f6ee553f83.

No decrease in power consumption or improvement in timing.
 2018-03-06 14:27:19 +01:00
Robert Jördens fd3cdce59a kasli/opticlock: use plain ttls for channels 8-23 2018-03-06 14:27:19 +01:00
Robert Jördens 50298a6104 ttl_serdes_7series: suppress diff_term in outputs 2018-03-06 14:27:19 +01:00
Robert Jördens e356150ac4 ttl_simple: support differential io 2018-03-06 14:27:19 +01:00
Robert Jördens 956098c213 kasli: add second urukul, make clk_sel drive optional 2018-03-06 14:26:27 +01:00
Robert Jördens 07de7af86a kasli: make second eem optional in urukul 2018-03-06 14:26:26 +01:00
Robert Jördens 257bef0d21 slave_fpga: print more info 2018-03-06 14:26:26 +01:00
Sebastien Bourdeauducq c25560baec sed: more LaneDistributor comments 2018-03-06 20:56:35 +08:00
Sebastien Bourdeauducq f40255c968 sed: add comments about key points in LaneDistributor 2018-03-06 20:51:09 +08:00
Florent Kermarrec 5b3d6d57e2 drtio/gth: power down rx on restart (seems to make link initialization reliable) 2018-03-06 11:49:28 +01:00
Florent Kermarrec 64b05f07bb drtio/gth: use parameters from Xilinx transceiver wizard 2018-03-06 11:02:15 +01:00
Florent Kermarrec 45f1e5a70e drtio/gth: cleanup import 2018-03-06 10:56:07 +01:00
Sebastien Bourdeauducq a274af77d5 runtime: fix compilation without DRTIO 2018-03-05 00:43:42 +08:00
Sebastien Bourdeauducq 432e61bbb4 drtio: add kernel API to check for link status. Closes #941 2018-03-05 00:23:55 +08:00
Sebastien Bourdeauducq 6aaa8bf9d9 drtio: fix link error generation 2018-03-04 23:20:13 +08:00
Sebastien Bourdeauducq d747d74cb3 test: fix test_dma 2018-03-04 23:19:06 +08:00
Sebastien Bourdeauducq 928d5dc9b3 drtio: raise RTIOLinkError if operation fails due to link lost (#942) 2018-03-04 01:02:53 +08:00
Sebastien Bourdeauducq ba74013e3e runtime: add a missing overflow flag reset 2018-03-03 13:16:21 +08:00
Sebastien Bourdeauducq abfbadebb5 doc: DMA can also raise RTIOUnderflow 2018-03-03 13:14:34 +08:00
Robert Jördens ddcc68cff9 sayma_amc: move bitstream options to migen 
close #930
 2018-03-02 18:13:03 +08:00
Sebastien Bourdeauducq 5e074f83ac examples: update kasli sysu 2018-03-02 16:05:12 +08:00
Sebastien Bourdeauducq 29d42f4648 artiq_flash: add kasli sysu 2018-03-02 15:49:41 +08:00
Sebastien Bourdeauducq a9daaad77b kasli: add SYSU variant and device_db 2018-03-02 14:44:31 +08:00
Robert Jördens 1c57d27ae2 slave_fpga: use sayma_rtm magic 2018-03-01 18:32:19 +01:00
Robert Jördens de63e657b8 kasli/si5324: lock to 100 MHz with highest available bandwidth 2018-03-01 14:49:53 +01:00
Robert Jördens abd160d143 slave_fpga: check DONE before loading 2018-03-01 19:53:34 +08:00
Robert Jördens a04a36ee36 firmware: move wait for write completion to read() 2018-03-01 11:37:33 +01:00
Robert Jördens a6ae08d8b8 firmware/spi: work around cs_polarity semantics 
The semantics differ between the RTIO and CSR interface.
 2018-03-01 11:19:18 +01:00
Robert Jördens cc70578f1f remove old spi RTIO Phy 2018-03-01 11:19:18 +01:00
Robert Jördens ec5b81da55 kc705: switch backplane spi to spi2 2018-03-01 11:19:18 +01:00
Robert Jördens 6fbe0d8ed8 hmc830: be explicit about SPI mode selection 2018-03-01 11:19:18 +01:00
Robert Jördens a7720d05cd firmware, sayma: port converter_spi to spi2 
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
 2018-03-01 11:19:18 +01:00
Robert Jördens 68278e225d slave_fpga: check for INIT low 2018-03-01 17:28:01 +08:00
whitequark 14f6fa6699 firmware: fix a warning. 2018-03-01 01:25:55 +00:00
whitequark d051cec0dd firmware: remove useless module. 2018-03-01 01:22:52 +00:00
Robert Jördens 54984f080b artiq_flash: flash RTM firmware 
based on whitequark's work in f95fb27

m-labs/artiq#813
 2018-02-28 19:29:01 +01:00
Robert Jördens 0c49201be7 firmware: add slave fpga serial load support 
based on whitequark's work in f95fb27

m-labs/artiq#813
 2018-02-28 19:27:52 +01:00
Robert Jördens 1f999c7f5f sayma_amc: expose RTM fpga load pins as GPIOs 2018-02-28 18:44:36 +01:00
Robert Jördens cedecc3030 Revert "firmware: Sayma RTM FPGA bitstream loading prototype (#813)." 
This reverts commit f95fb273f1.

Will be replaced with a bitbang/GPIO based version.
 2018-02-28 18:43:56 +01:00
whitequark f95fb273f1 firmware: Sayma RTM FPGA bitstream loading prototype (#813). 2018-02-28 16:46:23 +00:00
Florent Kermarrec 2896dc619b drtio/transceiver/gth: fix multilane 2018-02-28 14:15:40 +01:00
Robert Jördens 5046d6a529 ad9912/10: add a bit more slack to init() 2018-02-27 23:14:44 +01:00
Robert Jördens f97163cdee examples/master: sync device_db with kc705_nist_clock 2018-02-27 19:40:00 +01:00
whitequark 916b10ca94 examples: spi → spi2. 2018-02-27 18:36:45 +00:00
Sebastien Bourdeauducq 386aa75aaa kasli: control SFP1 and SFP2 LEDs in DRTIO satellite to match master 2018-02-27 23:18:18 +08:00
Sebastien Bourdeauducq 5d81877b34 kasli: implement multi-link DRTIO on SFP1 and SFP2 of master 2018-02-27 23:15:20 +08:00
Florent Kermarrec 1f0d955ce4 drtio/transceiver/gtp: implement tx multi lane phase alignment sequence 2018-02-27 12:32:25 +01:00
Sebastien Bourdeauducq e565d3fa59 kasli: add analyzer and RTIO log to DRTIO master target 2018-02-27 18:09:07 +08:00
Robert Jördens 760724c500 kasli/device_db: fix i2c switch addr 2018-02-26 11:37:12 +01:00
Robert Jördens b466a569bf coredevice: export spi2 2018-02-24 09:49:31 +01:00
Florent Kermarrec 5b0f9cc6fd drtio/transceiver/gth: fix single transceiver case 2018-02-23 12:15:47 +01:00
Robert Jördens cff85ee13b novogorny: simplify and fix coefficient 2018-02-23 10:09:44 +01:00
Florent Kermarrec b4ba71c7a4 drtio/transceiver/gth: implement tx multi lane phase alignment sequence (fix merge issue...) 2018-02-23 08:37:05 +01:00
Florent Kermarrec 820c834251 drtio/transceiver/gth: implement tx multi lane phase alignment sequence 2018-02-22 22:14:15 +01:00
Robert Jördens bc5e949bb4 novogorny: fix gain register length 2018-02-22 18:45:55 +00:00
Robert Jördens 1452cd7447 novogorny: add coredevice driver and test with Kasli 
m-labs/artiq#687
 2018-02-22 17:19:51 +01:00
Robert Jördens 74517107f0 ad9912: add slack after prodid read 2018-02-22 17:19:51 +01:00