2a7a8f91ca
gateware: fix import
2017-01-18 16:51:30 -06:00
ce31ffddb0
firmware: add satellite manager
...
The code duplication with the runtime should be cleaned up later.
2017-01-18 16:50:32 -06:00
b40953800a
gateware: soc -> amp.soc
2017-01-18 15:28:14 -06:00
aeb1ba8471
gateware: use default MiSoC timer
2017-01-18 15:22:33 -06:00
b8d89d56b1
drtio: add GenericRXSynchronizer
2017-01-15 13:44:43 -06:00
0edffb54c2
drtio: fix packet truncation detection in RTPacketSatellite
2017-01-13 09:29:22 -06:00
6805feb494
drtio: report truncated packets
2017-01-12 23:44:45 -06:00
7c699e2f80
drtio: add FIFO space request count debug API
2017-01-11 13:48:14 -06:00
c25186fae1
drtio: print packet error descriptions in log
2017-01-10 18:03:01 -06:00
98598df78e
rtio: keep retrying on get FIFO space timeout
2017-01-10 16:12:32 -06:00
e624f45369
drtio: remove FIFO empty local detection optimization
...
It optimizes a marginal case, it is difficult to get right
(need to know the size of the FIFO for each channel), and
it adds complexity and potential bug sources.
2017-01-10 14:31:46 -06:00
f75fffcf96
drtio: fix satellite RX data corruption
2017-01-10 14:29:30 -06:00
fe53bab953
targets: kc705 -> kc705_dds
2017-01-05 18:40:56 +01:00
082fdaf450
move i2c to libboard, do bit-banging on comms CPU
2017-01-04 21:04:38 +01:00
86f6b391b7
ad9xxx -> ad9_dds
2017-01-04 11:34:52 +01:00
c08fc8aae9
firmware: support moninj without DDS. Closes #650
2017-01-04 11:26:02 +01:00
455250b3f9
remove DDS_AD9914 and DDS_ONEHOT_SEL
2017-01-03 22:04:25 +01:00
fbf5a4d4a2
Merge branch 'phaser2-rust-init'
2017-01-03 21:31:21 +01:00
9a80b8d533
spi: fix xfers with full data_width ( closes #615 )
...
misoc 15000af43611bbe8be13cb2b016e408f043202cd
2017-01-03 19:51:14 +01:00
7ff77bceac
move AD9616 and AD9154 initialization to firmware
2017-01-03 16:11:38 +01:00
417708af90
phaser: add note about DDS defines ( #650 )
2017-01-02 22:15:21 +01:00
f5f662200b
fir: streamline, optimize DSP extraction, left-align inputs
2016-12-20 21:39:51 +01:00
cfb66117af
fir: size hint for pre-adder
2016-12-20 17:58:06 +01:00
f310274e39
fir: cleanup halfgen4
2016-12-20 17:58:06 +01:00
6b998581cc
rtio: use same reset for counter_rtio whatever the interface delay is
2016-12-15 09:28:13 +08:00
115ea67860
fir: automatically use transposed topology
2016-12-14 19:16:07 +01:00
a451b675c9
Revert "fir: different adder layout"
...
This reverts commit 6f50e77b409c293c1905f28e69d79403a0803866.
2016-12-14 19:16:07 +01:00
93076b8efa
fir: different adder layout
2016-12-14 19:16:07 +01:00
61abd994e9
Revert "fir: force dsp48"
...
This reverts commit 0ad433832d1b6dcd803ffa086ae73b2ee0568326.
2016-12-14 19:16:07 +01:00
641d109786
fir: force dsp48
2016-12-14 19:16:07 +01:00
8381db279f
sawg: wire up all HBF outputs, latency compensation in phys, simplify
2016-12-14 19:16:07 +01:00
6cdb96c5e0
rtio: add support for latency compensation in phy
...
* if multiple RTIO channels influence the same data stream and physical
output channel (see SAWG) differential latency needs to be compensated
* this is a NOP for phys with zero delay (default)
* if delay==1, it adds one timestamp-wide register
* if delay >1, it adds one adder and one register
* latency compensation using (~10-50 deep) delay lines is about as
expensive as a single adder+register but very tedious to implement
2016-12-14 19:16:07 +01:00
4c27029be0
sawg: fix limit regs
2016-12-14 19:16:07 +01:00
e9592105ce
drtio: fix aux controller clock domain mistakes
2016-12-14 10:16:45 +08:00
527757b471
kc705_drtio: use ad9154_fmc_ebz
2016-12-13 14:30:26 +08:00
3b5abae935
drtio: fix clock domain conflict
2016-12-13 14:19:49 +08:00
03d13d3811
phaser: dma/drtio changes
2016-12-12 17:46:36 +01:00
c63fa46430
Merge branch 'phaser2'
...
* phaser2: (157 commits)
sawg/hbf: tweak pipeline for timing
fir: register multiplier output
conda/phaser: build-depend on numpy
sawg: reduce coefficient width
sawg: fix latency
test/fir: needs mpl. don't run by default
test/sawg: patch spline
sawg: use ParallelHBFCascade to AA [WIP]
fir: add ParallelHBFCascade
fir: add ParallelFIR and test
gateware/dsp: add FIR and test
README_PHASER: update
sawg: documentation
sawg: extract spline
sawg: document
sawg: demo_2tone
sawg: round to int64
gateware/phaser -> gateware/ad9154_fmc_ebz
phaser: fix typo
sawg: merge set/set64
...
2016-12-12 17:31:39 +01:00
4b61020b27
drtio: reset more local state
2016-12-12 18:48:10 +08:00
d99e64effd
drtio: clear any stale FIFO space reply
2016-12-12 18:02:56 +08:00
4c59c0fecf
Revert "drtio: order resets wrt writes"
...
This reverts commit 9a048c2b3a
2016-12-12 17:49:07 +08:00
8f747fa209
drtio: clear underflow and sequence error on reset
2016-12-12 17:39:14 +08:00
7196bc21c1
rtio: simplify error reset logic
...
Channel is always selected when reset is issued.
2016-12-12 17:35:10 +08:00
9a048c2b3a
drtio: order resets wrt writes
2016-12-12 17:18:07 +08:00
0a9f69a3ed
kc705_drtio_master: add missing rtio_core CSRs
2016-12-09 19:23:36 +08:00
bc36bda94a
perform RTIO init on comms CPU side
2016-12-09 14:16:55 +08:00
f6071a5812
sawg/hbf: tweak pipeline for timing
2016-12-08 17:00:53 +01:00
b7a308d33d
fir: register multiplier output
2016-12-08 17:00:39 +01:00
18e3f58c22
sawg: reduce coefficient width
2016-12-08 16:14:32 +01:00
598da09a93
sawg: fix latency
2016-12-08 15:53:35 +01:00
