forked from M-Labs/artiq
1
0
Fork 0

phaser: init [wip]

This commit is contained in:
Robert Jördens 2020-09-14 13:12:44 +00:00
parent 07418258ae
commit ff57813a9c
1 changed files with 66 additions and 28 deletions

View File

@ -129,11 +129,13 @@ class Phaser:
self.channel = [PhaserChannel(self, ch) for ch in range(2)] self.channel = [PhaserChannel(self, ch) for ch in range(2)]
@kernel @kernel
def init(self): def init(self, clk_sel=0):
"""Initialize the board. """Initialize the board.
Verifies board and chip presence, resets components, performs communication Verifies board and chip presence, resets components, performs communication
and configuration tests and establishes initial conditions. and configuration tests and establishes initial conditions.
:param clk_sel: Select the external SMA clock input (1 or 0)
""" """
board_id = self.read8(PHASER_ADDR_BOARD_ID) board_id = self.read8(PHASER_ADDR_BOARD_ID)
if board_id != PHASER_BOARD_ID: if board_id != PHASER_BOARD_ID:
@ -148,7 +150,7 @@ class Phaser:
self.set_cfg(dac_resetb=0, att0_rstn=0, att1_rstn=0) self.set_cfg(dac_resetb=0, att0_rstn=0, att1_rstn=0)
self.set_leds(0x00) self.set_leds(0x00)
self.set_fan_mu(0) self.set_fan_mu(0)
self.set_cfg() # bring everything out of reset self.set_cfg(clk_sel=clk_sel) # bring everything out of reset
delay(.1*ms) # slack delay(.1*ms) # slack
# 4 wire SPI, sif4_enable # 4 wire SPI, sif4_enable
@ -165,6 +167,43 @@ class Phaser:
raise ValueError("DAC temperature out of bounds") raise ValueError("DAC temperature out of bounds")
delay(.1*ms) delay(.1*ms)
delay(.5*ms) # slack
self.dac_write(0x00, 0x019c) # I=2, fifo, clkdiv_sync, qmc off
self.dac_write(0x01, 0x040e) # fifo alarms, parity
self.dac_write(0x02, 0x70a2) # clk alarms, sif4, nco off, mix, mix_gain, 2s
self.dac_write(0x03, 0x6000) # coarse dac 20.6 mA
self.dac_write(0x07, 0x40c1) # alarm mask
self.dac_write(0x09, 0x8000) # fifo_offset
self.dac_write(0x0d, 0x0000) # fmix, no cmix
self.dac_write(0x14, 0x5431) # fine nco ab
self.dac_write(0x15, 0x0323) # coarse nco ab
self.dac_write(0x16, 0x5431) # fine nco cd
self.dac_write(0x17, 0x0323) # coarse nco cd
self.dac_write(0x18, 0x2c60) # P=4, pll run, single cp, pll_ndivsync
self.dac_write(0x19, 0x8404) # M=8 N=1
self.dac_write(0x1a, 0xfc00) # pll_vco=63
delay(.2*ms) # slack
self.dac_write(0x1b, 0x0800) # int ref, fuse
self.dac_write(0x1e, 0x9999) # qmc sync from sif and reg
self.dac_write(0x1f, 0x9982) # mix sync, nco sync, istr is istr, sif_sync
self.dac_write(0x20, 0x2400) # fifo sync ISTR-OSTR
self.dac_write(0x22, 0x1be4) # reverse dacs for spectral inversion and layout
self.dac_write(0x24, 0x0000) # clk and data delays
delay(1*ms) # lock pll
lvolt = self.dac_read(0x18) & 7
delay(.1*ms)
if lvolt < 2 or lvolt > 5:
raise ValueError("DAC PLL tuning voltage out of bounds")
self.dac_write(0x20, 0x0000) # stop fifo sync
self.dac_write(0x05, 0x0000) # clear alarms
delay(1*ms) # run it
alarm = self.get_sta() & 1
delay(.1*ms)
if alarm:
alarm = self.dac_read(0x05)
raise ValueError("DAC alarm")
patterns = [ patterns = [
[0xffff, 0xffff, 0x0000, 0x0000], # test channel [0xffff, 0xffff, 0x0000, 0x0000], # test channel
[0xaa55, 0x55aa, 0x55aa, 0xaa5a], # test iq [0xaa55, 0x55aa, 0x55aa, 0xaa5a], # test iq
@ -173,11 +212,18 @@ class Phaser:
[0x1a1a, 0x1616, 0xaaaa, 0xc6c6], # ds pattern b [0x1a1a, 0x1616, 0xaaaa, 0xc6c6], # ds pattern b
] ]
delay(.5*ms) delay(.5*ms)
for i in range(len(patterns)): # A data delay of 3*50 ps heuristically matches FPGA+board+DAC skews.
errors = self.dac_iotest(patterns[i]) # There is plenty of margin and no need to tune at runtime.
if errors: # Parity provides another level of safety.
raise ValueError("iotest error") for dly in [-3]: # range(-7, 8)
delay(.5*ms) if dly < 0:
dly = -dly << 3 # data delay, else clock delay
self.dac_write(0x24, dly << 10)
for i in range(len(patterns)):
errors = self.dac_iotest(patterns[i])
if errors:
raise ValueError("iotest error")
delay(.5*ms)
hw_rev = self.read8(PHASER_ADDR_HW_REV) hw_rev = self.read8(PHASER_ADDR_HW_REV)
has_upconverter = hw_rev & PHASER_HW_REV_VARIANT has_upconverter = hw_rev & PHASER_HW_REV_VARIANT
@ -424,26 +470,18 @@ class Phaser:
# dac test data is i msb, q lsb # dac test data is i msb, q lsb
self.channel[ch].set_dac_test(pattern[2*ch] | (pattern[2*ch + 1] << 16)) self.channel[ch].set_dac_test(pattern[2*ch] | (pattern[2*ch + 1] << 16))
self.dac_write(0x01, 0x8000) # iotest_ena self.dac_write(0x01, 0x8000) # iotest_ena
errors = 0 self.dac_write(0x04, 0x0000) # clear iotest_result
# A data delay of 3*50 ps heuristically matches FPGA+board+DAC skews. delay(.2*ms) # let it rip
# There is plenty of margin and no need to tune at runtime. # no need to go through the alarm register,
# Parity provides another level of safety. # just read the error mask
for dly in [-3]: # range(-7, 8) # self.dac_write(0x05, 0x0000) # clear alarms
if dly < 0: # alarm = self.dac_read(0x05)
dly = -dly << 3 # data delay, else clock delay # delay(.1*ms) # slack
self.dac_write(0x24, dly << 10) # if alarm & 0x0080: # alarm_from_iotest
self.dac_write(0x04, 0x0000) # clear iotest_result errors = self.dac_read(0x04)
delay(.2*ms) # let it rip delay(.1*ms) # slack
# no need to go through the alarm register, self.dac_write(0x01, 0x0000) # clear config
# just read the error mask self.dac_write(0x04, 0x0000) # clear iotest_result
# self.dac_write(0x05, 0x0000) # clear alarms
# alarm = self.dac_read(0x05)
# delay(.1*ms) # slack
# if alarm & 0x0080: # alarm_from_iotest
errors |= self.dac_read(0x04)
delay(.1*ms) # slack
self.dac_write(0x24, 0) # reset delays
# self.dac_write(0x01, 0x0000) # clear config
return errors return errors