forked from M-Labs/artiq
phaser: iotest early, check_alarms
This commit is contained in:
parent
b15e388b5f
commit
f0959fb871
@ -169,44 +169,6 @@ class Phaser:
|
||||
t = self.get_dac_temperature()
|
||||
if t < 10 or t > 90:
|
||||
raise ValueError("DAC temperature out of bounds")
|
||||
delay(.1*ms)
|
||||
|
||||
delay(.5*ms) # slack
|
||||
self.dac_write(0x00, 0x019c) # I=2, fifo, clkdiv_sync, qmc off
|
||||
self.dac_write(0x01, 0x040e) # fifo alarms, parity
|
||||
self.dac_write(0x02, 0x70a2) # clk alarms, sif4, nco off, mix, mix_gain, 2s
|
||||
self.dac_write(0x03, 0x4000) # coarse dac 20.6 mA
|
||||
self.dac_write(0x07, 0x40c1) # alarm mask
|
||||
self.dac_write(0x09, 0x4000) # fifo_offset
|
||||
self.dac_write(0x0d, 0x0000) # fmix, no cmix
|
||||
self.dac_write(0x14, 0x5431) # fine nco ab
|
||||
self.dac_write(0x15, 0x0323) # coarse nco ab
|
||||
self.dac_write(0x16, 0x5431) # fine nco cd
|
||||
self.dac_write(0x17, 0x0323) # coarse nco cd
|
||||
self.dac_write(0x18, 0x2c60) # P=4, pll run, single cp, pll_ndivsync
|
||||
self.dac_write(0x19, 0x8814) # M=16 N=2
|
||||
self.dac_write(0x1a, 0xfc00) # pll_vco=63, 4 GHz
|
||||
delay(.2*ms) # slack
|
||||
self.dac_write(0x1b, 0x0800) # int ref, fuse
|
||||
self.dac_write(0x1e, 0x9999) # qmc sync from sif and reg
|
||||
self.dac_write(0x1f, 0x9982) # mix sync, nco sync, istr is istr, sif_sync
|
||||
self.dac_write(0x20, 0x2400) # fifo sync ISTR-OSTR
|
||||
self.dac_write(0x22, 0x1be4) # reverse dacs for spectral inversion and layout
|
||||
self.dac_write(0x24, 0x0000) # clk and data delays
|
||||
|
||||
self.clear_dac_alarms()
|
||||
delay(1*ms) # lock pll
|
||||
lvolt = self.dac_read(0x18) & 7
|
||||
delay(.1*ms)
|
||||
if lvolt < 2 or lvolt > 5:
|
||||
raise ValueError("DAC PLL tuning voltage out of bounds")
|
||||
# self.dac_write(0x20, 0x0000) # stop fifo sync
|
||||
# alarm = self.get_sta() & 1
|
||||
# delay(.1*ms)
|
||||
alarm = self.get_dac_alarms()
|
||||
if alarm & ~0x0040: # ignore PLL alarms (see DS)
|
||||
print(alarm)
|
||||
raise ValueError("DAC alarm")
|
||||
delay(.5*ms)
|
||||
|
||||
patterns = [
|
||||
@ -228,6 +190,35 @@ class Phaser:
|
||||
if errors:
|
||||
raise ValueError("iotest error")
|
||||
delay(.5*ms)
|
||||
|
||||
delay(.5*ms) # slack
|
||||
self.dac_write(0x00, 0x019c) # I=2, fifo, clkdiv_sync, qmc off
|
||||
self.dac_write(0x01, 0x040e) # fifo alarms, parity
|
||||
self.dac_write(0x02, 0x70a2) # clk alarms, sif4, nco off, mix, mix_gain, 2s
|
||||
self.dac_write(0x03, 0xa000) # coarse dac 20.6 mA
|
||||
self.dac_write(0x07, 0x40c1) # alarm mask
|
||||
self.dac_write(0x09, 0x4000) # fifo_offset
|
||||
self.dac_write(0x0d, 0x0000) # fmix, no cmix
|
||||
self.dac_write(0x14, 0x5431) # fine nco ab
|
||||
self.dac_write(0x15, 0x0323) # coarse nco ab
|
||||
self.dac_write(0x16, 0x5431) # fine nco cd
|
||||
self.dac_write(0x17, 0x0323) # coarse nco cd
|
||||
self.dac_write(0x18, 0x2c60) # P=4, pll run, single cp, pll_ndivsync
|
||||
self.dac_write(0x19, 0x8814) # M=16 N=2
|
||||
self.dac_write(0x1a, 0xfc00) # pll_vco=63, 4 GHz
|
||||
delay(.2*ms) # slack
|
||||
self.dac_write(0x1b, 0x0800) # int ref, fuse
|
||||
self.dac_write(0x1e, 0x9999) # qmc sync from sif and reg
|
||||
self.dac_write(0x1f, 0x9982) # mix sync, nco sync, istr is istr, sif_sync
|
||||
self.dac_write(0x20, 0x2400) # fifo sync ISTR-OSTR
|
||||
self.dac_write(0x22, 0x1be4) # reverse dacs for spectral inversion and layout
|
||||
self.dac_write(0x24, 0x0000) # clk and data delays
|
||||
|
||||
delay(2*ms) # lock pll
|
||||
lvolt = self.dac_read(0x18) & 7
|
||||
delay(.1*ms)
|
||||
if lvolt < 2 or lvolt > 5:
|
||||
raise ValueError("DAC PLL tuning voltage out of bounds")
|
||||
self.clear_dac_alarms()
|
||||
|
||||
hw_rev = self.read8(PHASER_ADDR_HW_REV)
|
||||
@ -236,8 +227,8 @@ class Phaser:
|
||||
|
||||
for ch in range(2):
|
||||
# test attenuator write and readback
|
||||
self.channel[ch].set_att_mu(0x55)
|
||||
if self.channel[ch].get_att_mu() != 0x55:
|
||||
self.channel[ch].set_att_mu(0x5a)
|
||||
if self.channel[ch].get_att_mu() != 0x5a:
|
||||
raise ValueError("attenuator test failed")
|
||||
delay(.1*ms)
|
||||
self.channel[ch].set_att(31.5*dB)
|
||||
@ -250,6 +241,19 @@ class Phaser:
|
||||
raise ValueError("DAC test data readback failed")
|
||||
delay(.1*ms)
|
||||
|
||||
# self.dac_write(0x20, 0x0000) # stop fifo sync
|
||||
# alarm = self.get_sta() & 1
|
||||
# delay(.1*ms)
|
||||
self.check_dac_alarms()
|
||||
|
||||
@kernel
|
||||
def check_dac_alarms(self):
|
||||
alarm = self.get_dac_alarms()
|
||||
delay(.1*ms) # slack
|
||||
if alarm & ~0x0040: # ignore PLL alarms (see DS)
|
||||
print(alarm)
|
||||
raise ValueError("DAC alarm")
|
||||
|
||||
@kernel
|
||||
def write8(self, addr, data):
|
||||
"""Write data to FPGA register.
|
||||
@ -506,11 +510,13 @@ class Phaser:
|
||||
# no need to go through the alarm register,
|
||||
# just read the error mask
|
||||
# self.clear_dac_alarms()
|
||||
# alarm = self.dac_read(0x05)
|
||||
# delay(.1*ms) # slack
|
||||
# if alarm & 0x0080: # alarm_from_iotest
|
||||
errors = self.dac_read(0x04)
|
||||
alarm = self.get_dac_alarms()
|
||||
delay(.1*ms) # slack
|
||||
if alarm & 0x0080: # alarm_from_iotest
|
||||
errors = self.dac_read(0x04)
|
||||
delay(.1*ms) # slack
|
||||
else:
|
||||
errors = 0
|
||||
self.dac_write(0x01, 0x0000) # clear config
|
||||
self.dac_write(0x04, 0x0000) # clear iotest_result
|
||||
return errors
|
||||
|
Loading…
Reference in New Issue
Block a user