forked from M-Labs/artiq
1
0
Fork 0

phaser: elaborate init sequence, more tests

This commit is contained in:
Robert Jördens 2020-09-21 15:05:29 +00:00
parent f0959fb871
commit d730851397
1 changed files with 38 additions and 19 deletions

View File

@ -145,16 +145,17 @@ class Phaser:
raise ValueError("invalid board id") raise ValueError("invalid board id")
delay(20*us) # slack delay(20*us) # slack
# allow a few errors during startup and alignment # allow a few errors during startup and alignment since boot
if self.get_crc_err() > 20: if self.get_crc_err() > 20:
raise ValueError("large number of CRC errors") raise ValueError("large number of frame CRC errors")
delay(.1*ms) # slack delay(.1*ms) # slack
# reset
self.set_cfg(dac_resetb=0, att0_rstn=0, att1_rstn=0) self.set_cfg(dac_resetb=0, att0_rstn=0, att1_rstn=0)
self.set_leds(0x00) self.set_leds(0x00)
self.set_fan_mu(0) self.set_fan_mu(0)
self.set_cfg(clk_sel=clk_sel) # bring everything out of reset self.set_cfg(clk_sel=clk_sel) # bring everything out of reset
self.set_sync_dly(4) # tune? self.set_sync_dly(4) # TODO: tune this?
delay(.1*ms) # slack delay(.1*ms) # slack
# 4 wire SPI, sif4_enable # 4 wire SPI, sif4_enable
@ -163,7 +164,7 @@ class Phaser:
raise ValueError("DAC version readback invalid") raise ValueError("DAC version readback invalid")
delay(.1*ms) delay(.1*ms)
if self.dac_read(0x00) != 0x049c: if self.dac_read(0x00) != 0x049c:
raise ValueError("DAC config0 readback invalid") raise ValueError("DAC config0 reset readback invalid")
delay(.1*ms) delay(.1*ms)
t = self.get_dac_temperature() t = self.get_dac_temperature()
@ -178,8 +179,9 @@ class Phaser:
[0x7a7a, 0xb6b6, 0xeaea, 0x4545], # ds pattern a [0x7a7a, 0xb6b6, 0xeaea, 0x4545], # ds pattern a
[0x1a1a, 0x1616, 0xaaaa, 0xc6c6], # ds pattern b [0x1a1a, 0x1616, 0xaaaa, 0xc6c6], # ds pattern b
] ]
# A data delay of 2*50 ps heuristically matches FPGA+board+DAC skews. # A data delay of 2*50 ps heuristically and reproducibly matches
# There is plenty of margin and no need to tune at runtime. # FPGA+board+DAC skews. There is plenty of margin (>= 250 ps
# either side) and no need to tune at runtime.
# Parity provides another level of safety. # Parity provides another level of safety.
for dly in [-2]: # range(-7, 8) for dly in [-2]: # range(-7, 8)
if dly < 0: if dly < 0:
@ -188,10 +190,9 @@ class Phaser:
for i in range(len(patterns)): for i in range(len(patterns)):
errors = self.dac_iotest(patterns[i]) errors = self.dac_iotest(patterns[i])
if errors: if errors:
raise ValueError("iotest error") raise ValueError("DAC iotest failure")
delay(.5*ms) delay(.5*ms)
delay(.5*ms) # slack
self.dac_write(0x00, 0x019c) # I=2, fifo, clkdiv_sync, qmc off self.dac_write(0x00, 0x019c) # I=2, fifo, clkdiv_sync, qmc off
self.dac_write(0x01, 0x040e) # fifo alarms, parity self.dac_write(0x01, 0x040e) # fifo alarms, parity
self.dac_write(0x02, 0x70a2) # clk alarms, sif4, nco off, mix, mix_gain, 2s self.dac_write(0x02, 0x70a2) # clk alarms, sif4, nco off, mix, mix_gain, 2s
@ -226,20 +227,33 @@ class Phaser:
delay(.1*ms) # slack delay(.1*ms) # slack
for ch in range(2): for ch in range(2):
channel = self.channel[ch]
# test attenuator write and readback # test attenuator write and readback
self.channel[ch].set_att_mu(0x5a) channel.set_att_mu(0x5a)
if self.channel[ch].get_att_mu() != 0x5a: if channel.get_att_mu() != 0x5a:
raise ValueError("attenuator test failed") raise ValueError("attenuator test failed")
delay(.1*ms) delay(.1*ms)
self.channel[ch].set_att(31.5*dB) channel.set_att(31.5*dB)
# dac test data readback for i in range(len(channel.oscillator)):
dac_test = [0x10102020, 0x30304040] oscillator = channel.oscillator[i]
self.channel[ch].set_duc_cfg(select=1) if i == 0:
self.channel[ch].set_dac_test(dac_test[ch]) asf = 0x7fff
if self.channel[ch].get_dac_data() != dac_test[ch]: else:
raise ValueError("DAC test data readback failed") asf = 0
# pi/4 phase
oscillator.set_amplitude_phase_mu(asf=asf, pow=0x2000, clr=1)
delay_mu(8)
delay(1*us) # settle link, pipeline and impulse response
# test oscillator and DUC and their phase sign
channel.set_duc_phase_mu(0)
channel.set_duc_cfg(select=0, clr=1)
self.duc_stb()
data = channel.get_dac_data()
delay(.1*ms) delay(.1*ms)
if data != 0x4a124a12:
print(data)
raise ValueError("DUC+oscillator phase/amplitude test failed")
# self.dac_write(0x20, 0x0000) # stop fifo sync # self.dac_write(0x20, 0x0000) # stop fifo sync
# alarm = self.get_sta() & 1 # alarm = self.get_sta() & 1
@ -501,9 +515,14 @@ class Phaser:
self.dac_write(0x29 + addr, pattern[addr]) self.dac_write(0x29 + addr, pattern[addr])
delay(.1*ms) delay(.1*ms)
for ch in range(2): for ch in range(2):
self.channel[ch].set_duc_cfg(select=1) # test channel = self.channel[ch]
channel.set_duc_cfg(select=1) # test
# dac test data is i msb, q lsb # dac test data is i msb, q lsb
self.channel[ch].set_dac_test(pattern[2*ch] | (pattern[2*ch + 1] << 16)) data = pattern[2*ch] | (pattern[2*ch + 1] << 16)
channel.set_dac_test(data)
if channel.get_dac_data() != data:
raise ValueError("DAC test data readback failed")
delay(.1*ms)
self.dac_write(0x01, 0x8000) # iotest_ena self.dac_write(0x01, 0x8000) # iotest_ena
self.dac_write(0x04, 0x0000) # clear iotest_result self.dac_write(0x04, 0x0000) # clear iotest_result
delay(.2*ms) # let it rip delay(.2*ms) # let it rip