forked from M-Labs/artiq
1
0
Fork 0

force hold on bypass and use names in set_servo() in init

This commit is contained in:
SingularitySurfer 2022-06-21 10:11:49 +00:00
parent b67a70392d
commit ce4055db3b
1 changed files with 6 additions and 5 deletions

View File

@ -138,7 +138,7 @@ class Phaser:
update the y0, y1 output registers. The servo can also be bypassed. update the y0, y1 output registers. The servo can also be bypassed.
After power-up the servo is bypassed, in profile 0, with coefficients [0, 0, 0] After power-up the servo is bypassed, in profile 0, with coefficients [0, 0, 0]
and hold is disabled. If older gateware without ther servo is loaded onto the and hold is enabled. If older gateware without ther servo is loaded onto the
Phaser FPGA, the device simply behaves as if the servo is bypassed and none of Phaser FPGA, the device simply behaves as if the servo is bypassed and none of
the servo functions have any effect. the servo functions have any effect.
@ -340,8 +340,7 @@ class Phaser:
delay(.1*ms) delay(.1*ms)
channel.set_att_mu(0x00) # minimum attenuation channel.set_att_mu(0x00) # minimum attenuation
# disable servo, set iir profile to 0 and disable iir hold channel.set_servo(profile=0, bypass=1, hold=1)
channel.set_servo(0, 1, 0)
# test oscillators and DUC # test oscillators and DUC
for i in range(len(channel.oscillator)): for i in range(len(channel.oscillator)):
@ -1082,14 +1081,16 @@ class PhaserChannel:
def set_servo(self, profile=0, bypass=1, hold=0): def set_servo(self, profile=0, bypass=1, hold=0):
"""Set the servo configuration. """Set the servo configuration.
:param bypass: 1 to enable bypass (default), 0 to engage servo :param bypass: 1 to enable bypass (default), 0 to engage servo. If bypassed, hold
is forced since the control loop is broken.
:param hold: 1 to hold the servo IIR filter output constant, 0 for normal operation :param hold: 1 to hold the servo IIR filter output constant, 0 for normal operation
:param profile: profile index to select for channel (0 to 3) :param profile: profile index to select for channel (0 to 3)
""" """
if (profile < 0) or (profile > 3): if (profile < 0) or (profile > 3):
raise ValueError("invalid profile index") raise ValueError("invalid profile index")
addr = PHASER_ADDR_SERVO_CFG0 + self.index addr = PHASER_ADDR_SERVO_CFG0 + self.index
data = (profile << 2) | ((hold & 1) << 1) | (~bypass & 1) # enforce hold if the servo is bypassed
data = (profile << 2) | (((hold | bypass) & 1) << 1) | (~bypass & 1)
self.phaser.write8(addr, data) self.phaser.write8(addr, data)
@kernel @kernel