forked from M-Labs/artiq
1
0
Fork 0

doc/manual: fix confusing board config instructions

This commit is contained in:
Sebastien Bourdeauducq 2015-08-07 20:48:48 +08:00
parent 7ed8fe57fa
commit c6e5eaa73a
1 changed files with 28 additions and 25 deletions

View File

@ -70,8 +70,6 @@ Next step (for KC705) is to flash MAC and IP addresses to the board:
Installing from source
----------------------
You can skip the first two steps if you already installed from conda.
Preparing the build environment for the core device
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
@ -229,6 +227,34 @@ These steps are required to generate bitstream (``.bit``) files, build the MiSoC
The communication parameters are 115200 8-N-1.
Installing the host-side software
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* Install the llvmlite Python bindings: ::
$ cd ~/artiq-dev
$ git clone https://github.com/m-labs/llvmlite
$ git checkout artiq
$ cd llvmlite
$ LLVM_CONFIG=/usr/local/llvm-or1k/bin/llvm-config python3 setup.py install --user
* Install ARTIQ: ::
$ cd ~/artiq-dev
$ git clone --recursive https://github.com/m-labs/artiq # if not already done
$ cd artiq
$ python3 setup.py develop --user
* Build the documentation: ::
$ cd ~/artiq-dev/artiq/doc/manual
$ make html
Configuring the core device
---------------------------
This should be done after either installation methods (conda or source).
.. _flash-mac-ip-addr:
* Set the MAC and IP address in the :ref:`core device configuration flash storage <core-device-flash-storage>`:
@ -295,29 +321,6 @@ To flash the ``idle`` kernel:
.. note:: You can find more information about how to use the ``artiq_coretool`` utility on the :ref:`Utilities <core-device-access-tool>` page.
Installing the host-side software
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
* Install the llvmlite Python bindings: ::
$ cd ~/artiq-dev
$ git clone https://github.com/m-labs/llvmlite
$ git checkout artiq
$ cd llvmlite
$ LLVM_CONFIG=/usr/local/llvm-or1k/bin/llvm-config python3 setup.py install --user
* Install ARTIQ: ::
$ cd ~/artiq-dev
$ git clone --recursive https://github.com/m-labs/artiq # if not already done
$ cd artiq
$ python3 setup.py develop --user
* Build the documentation: ::
$ cd ~/artiq-dev/artiq/doc/manual
$ make html
Ubuntu 14.04 specific instructions
----------------------------------