forked from M-Labs/artiq
1
0
Fork 0

Update install instructions to reflect that LLVM is always needed.

This commit is contained in:
whitequark 2015-07-26 09:38:43 +03:00
parent e5acdfe3fd
commit 95f7be0a88
1 changed files with 30 additions and 23 deletions

View File

@ -70,35 +70,19 @@ Next step (for KC705) is to flash MAC and IP addresses to the board:
Installing from source Installing from source
---------------------- ----------------------
You can skip this if you already installed from conda. You can skip the first two steps if you already installed from conda.
Preparing the core device FPGA board Preparing the build environment for the core device
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
These steps are required to generate bitstream (``.bit``) files, build the MiSoC BIOS and ARTIQ runtime, and flash FPGA boards. If the board is already flashed, you may skip those steps and go directly to `Installing the host-side software`. These steps are required to generate code that can run on the core
device. They are necessary both for building the MiSoC BIOS
* Install the FPGA vendor tools (e.g. Xilinx ISE and/or Vivado): and the ARTIQ kernels.
* Get Xilinx tools from http://www.xilinx.com/support/download/index.htm. ISE can build bitstreams both for boards using the Spartan-6 (Pipistrello) and 7-series devices (KC705), while Vivado supports only boards using 7-series devices.
* The Pipistrello is supported by Webpack, the KC705 is not.
* During the Xilinx toolchain installation, uncheck ``Install cable drivers`` (they are not required as we use better and open source alternatives).
* Create a development directory: :: * Create a development directory: ::
$ mkdir ~/artiq-dev $ mkdir ~/artiq-dev
* Install Migen: ::
$ cd ~/artiq-dev
$ git clone https://github.com/m-labs/migen
$ cd migen
$ python3 setup.py develop --user
.. note::
The options ``develop`` and ``--user`` are for setup.py to install Migen in ``~/.local/lib/python3.4``.
* Install OpenRISC binutils (or1k-linux-...): :: * Install OpenRISC binutils (or1k-linux-...): ::
$ cd ~/artiq-dev $ cd ~/artiq-dev
@ -133,6 +117,29 @@ These steps are required to generate bitstream (``.bit``) files, build the MiSoC
.. note:: .. note::
Compilation of LLVM can take more than 30 min on some machines. Compilation of LLVM can take more than 30 min on some machines.
Preparing the core device FPGA board
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
These steps are required to generate bitstream (``.bit``) files, build the MiSoC BIOS and ARTIQ runtime, and flash FPGA boards. If the board is already flashed, you may skip those steps and go directly to `Installing the host-side software`.
* Install the FPGA vendor tools (e.g. Xilinx ISE and/or Vivado):
* Get Xilinx tools from http://www.xilinx.com/support/download/index.htm. ISE can build bitstreams both for boards using the Spartan-6 (Pipistrello) and 7-series devices (KC705), while Vivado supports only boards using 7-series devices.
* The Pipistrello is supported by Webpack, the KC705 is not.
* During the Xilinx toolchain installation, uncheck ``Install cable drivers`` (they are not required as we use better and open source alternatives).
* Install Migen: ::
$ cd ~/artiq-dev
$ git clone https://github.com/m-labs/migen
$ cd migen
$ python3 setup.py develop --user
.. note::
The options ``develop`` and ``--user`` are for setup.py to install Migen in ``~/.local/lib/python3.4``.
.. _install-xc3sprog: .. _install-xc3sprog:
* Install JTAG tools needed to program the Pipistrello and KC705: * Install JTAG tools needed to program the Pipistrello and KC705:
@ -297,7 +304,7 @@ Installing the host-side software
$ patch -p1 < ~/artiq-dev/artiq/misc/llvmlite-add-all-targets.patch $ patch -p1 < ~/artiq-dev/artiq/misc/llvmlite-add-all-targets.patch
$ patch -p1 < ~/artiq-dev/artiq/misc/llvmlite-rename.patch $ patch -p1 < ~/artiq-dev/artiq/misc/llvmlite-rename.patch
$ patch -p1 < ~/artiq-dev/artiq/misc/llvmlite-build-as-debug-on-windows.patch $ patch -p1 < ~/artiq-dev/artiq/misc/llvmlite-build-as-debug-on-windows.patch
$ PATH=/usr/local/llvm-or1k/bin:$PATH sudo -E python3 setup.py install $ LLVM_CONFIG=/usr/local/llvm-or1k/bin/llvm-config python3 setup.py install --user
.. note:: .. note::
llvmlite is in development and its API is not stable yet. Commit ID ``11a8303d02e3d6dd2d1e0e9065701795cd8a979f`` is known to work. llvmlite is in development and its API is not stable yet. Commit ID ``11a8303d02e3d6dd2d1e0e9065701795cd8a979f`` is known to work.