forked from M-Labs/artiq
serwb: add generic low-speed phy (125Mhz linerate, same phy for ultrascale/7-series)
This commit is contained in:
Florent Kermarrec
parent
520aade8fe
commit
913d1e8e12
|
|
@ -1 +1 @@
|
|||
from artiq.gateware.serwb import s7phy, kusphy, phy, core, packet, etherbone
|
||||
from artiq.gateware.serwb import s7phy, kusphy, genphy, phy, core, packet, etherbone
|
||||
|
|
|
|||
|
|
@ -0,0 +1,418 @@
|
|||
from migen import *
|
||||
from migen.genlib.io import *
|
||||
from migen.genlib.misc import BitSlip, WaitTimer
|
||||
|
||||
from misoc.interconnect import stream
|
||||
from misoc.interconnect.csr import *
|
||||
from misoc.cores.code_8b10b import Encoder, Decoder
|
||||
|
||||
from artiq.gateware.serwb.scrambler import Scrambler, Descrambler
|
||||
|
||||
|
||||
def K(x, y):
|
||||
return (y << 5) | x
|
||||
|
||||
|
||||
class _SerdesClocking(Module):
|
||||
def __init__(self, pads, mode="master"):
|
||||
self.refclk = Signal()
|
||||
|
||||
# # #
|
||||
|
||||
# In Master mode, generate the clock with 180° phase shift so that Slave
|
||||
# can use this clock to sample data
|
||||
if mode == "master":
|
||||
self.specials += DDROutput(0, 1, self.refclk)
|
||||
self.specials += DifferentialOutput(self.refclk, pads.clk_p, pads.clk_n)
|
||||
# In Slave mode, use the clock provided by Master
|
||||
elif mode == "slave":
|
||||
self.specials += DifferentialInput(pads.clk_p, pads.clk_n, self.refclk)
|
||||
|
||||
|
||||
class _SerdesTX(Module):
|
||||
def __init__(self, pads, mode="master"):
|
||||
# Control
|
||||
self.idle = idle = Signal()
|
||||
self.comma = comma = Signal()
|
||||
|
||||
# Datapath
|
||||
self.ce = ce = Signal()
|
||||
self.k = k = Signal(4)
|
||||
self.d = d = Signal(32)
|
||||
|
||||
# # #
|
||||
|
||||
# 8b10b encoder
|
||||
self.submodules.encoder = encoder = CEInserter()(Encoder(4, True))
|
||||
self.comb += encoder.ce.eq(ce)
|
||||
|
||||
# 40 --> 1 converter
|
||||
converter = stream.Converter(40, 1)
|
||||
self.submodules += converter
|
||||
self.comb += [
|
||||
converter.sink.stb.eq(1),
|
||||
converter.source.ack.eq(1),
|
||||
# Enable pipeline when converter accepts the 40 bits
|
||||
ce.eq(converter.sink.ack),
|
||||
# If not idle, connect encoder to converter
|
||||
If(~idle,
|
||||
converter.sink.data.eq(Cat(*[encoder.output[i] for i in range(4)]))
|
||||
),
|
||||
# If comma, send K28.5
|
||||
If(comma,
|
||||
encoder.k[0].eq(1),
|
||||
encoder.d[0].eq(K(28,5)),
|
||||
# Else connect TX to encoder
|
||||
).Else(
|
||||
encoder.k[0].eq(k[0]),
|
||||
encoder.k[1].eq(k[1]),
|
||||
encoder.k[2].eq(k[2]),
|
||||
encoder.k[3].eq(k[3]),
|
||||
encoder.d[0].eq(d[0:8]),
|
||||
encoder.d[1].eq(d[8:16]),
|
||||
encoder.d[2].eq(d[16:24]),
|
||||
encoder.d[3].eq(d[24:32])
|
||||
)
|
||||
]
|
||||
|
||||
# Data output (on rising edge of sys_clk)
|
||||
data = Signal()
|
||||
self.sync += data.eq(converter.source.data)
|
||||
self.specials += DifferentialOutput(data, pads.tx_p, pads.tx_n)
|
||||
|
||||
|
||||
class _SerdesRX(Module):
|
||||
def __init__(self, pads, mode="master"):
|
||||
# Control
|
||||
self.bitslip_value = bitslip_value = Signal(6)
|
||||
|
||||
# Status
|
||||
self.idle = idle = Signal()
|
||||
self.comma = comma = Signal()
|
||||
|
||||
# Datapath
|
||||
self.ce = ce = Signal()
|
||||
self.k = k = Signal(4)
|
||||
self.d = d = Signal(32)
|
||||
|
||||
# # #
|
||||
|
||||
# Input data (on rising edge of sys_clk)
|
||||
data = Signal()
|
||||
data_d = Signal()
|
||||
self.specials += DifferentialInput(pads.rx_p, pads.rx_n, data)
|
||||
self.sync += data_d.eq(data)
|
||||
|
||||
# 1 --> 40 converter and bitslip
|
||||
converter = stream.Converter(1, 40)
|
||||
self.submodules += converter
|
||||
bitslip = CEInserter()(BitSlip(40))
|
||||
self.submodules += bitslip
|
||||
self.comb += [
|
||||
converter.sink.stb.eq(1),
|
||||
converter.source.ack.eq(1),
|
||||
# Enable pipeline when converter outputs the 40 bits
|
||||
ce.eq(converter.source.stb),
|
||||
# Connect input data to converter
|
||||
converter.sink.data.eq(data),
|
||||
# Connect converter to bitslip
|
||||
bitslip.ce.eq(ce),
|
||||
bitslip.value.eq(bitslip_value),
|
||||
bitslip.i.eq(converter.source.data)
|
||||
]
|
||||
|
||||
# 8b10b decoder
|
||||
self.submodules.decoders = decoders = [CEInserter()(Decoder(True)) for _ in range(4)]
|
||||
self.comb += [decoders[i].ce.eq(ce) for i in range(4)]
|
||||
self.comb += [
|
||||
# Connect bitslip to decoder
|
||||
decoders[0].input.eq(bitslip.o[0:10]),
|
||||
decoders[1].input.eq(bitslip.o[10:20]),
|
||||
decoders[2].input.eq(bitslip.o[20:30]),
|
||||
decoders[3].input.eq(bitslip.o[30:40]),
|
||||
# Connect decoder to output
|
||||
self.k.eq(Cat(*[decoders[i].k for i in range(4)])),
|
||||
self.d.eq(Cat(*[decoders[i].d for i in range(4)])),
|
||||
]
|
||||
|
||||
# Status
|
||||
idle_timer = WaitTimer(256)
|
||||
self.submodules += idle_timer
|
||||
self.comb += [
|
||||
idle_timer.wait.eq(1),
|
||||
self.idle.eq(idle_timer.done &
|
||||
((bitslip.o == 0) | (bitslip.o == (2**40-1)))),
|
||||
self.comma.eq(
|
||||
(decoders[0].k == 1) & (decoders[0].d == K(28,5)) &
|
||||
(decoders[1].k == 0) & (decoders[1].d == 0) &
|
||||
(decoders[2].k == 0) & (decoders[2].d == 0) &
|
||||
(decoders[3].k == 0) & (decoders[3].d == 0))
|
||||
]
|
||||
|
||||
|
||||
@ResetInserter()
|
||||
class _Serdes(Module):
|
||||
def __init__(self, pads, mode="master"):
|
||||
self.submodules.clocking = _SerdesClocking(pads, mode)
|
||||
self.submodules.tx = _SerdesTX(pads, mode)
|
||||
self.submodules.rx = _SerdesRX(pads, mode)
|
||||
|
||||
|
||||
# SERWB Master <--> Slave physical synchronization process:
|
||||
# 1) Master sends idle patterns (zeroes) to Slave to reset it.
|
||||
# 2) Master sends K28.5 commas to allow Slave to calibrate, Slave sends idle patterns.
|
||||
# 3) Slave sends K28.5 commas to allow Master to calibrate, Master sends K28.5 commas.
|
||||
# 4) Master stops sending K28.5 commas.
|
||||
# 5) Slave stops sending K28.5 commas.
|
||||
# 6) Physical link is ready.
|
||||
|
||||
|
||||
@ResetInserter()
|
||||
class _SerdesMasterInit(Module):
|
||||
def __init__(self, serdes, timeout):
|
||||
self.ready = Signal()
|
||||
self.error = Signal()
|
||||
|
||||
# # #
|
||||
|
||||
self.bitslip = bitslip = Signal(max=40)
|
||||
|
||||
self.submodules.timer = timer = WaitTimer(timeout)
|
||||
|
||||
self.submodules.fsm = fsm = FSM(reset_state="IDLE")
|
||||
fsm.act("IDLE",
|
||||
NextValue(bitslip, 0),
|
||||
NextState("RESET_SLAVE"),
|
||||
serdes.tx.idle.eq(1)
|
||||
)
|
||||
fsm.act("RESET_SLAVE",
|
||||
timer.wait.eq(1),
|
||||
If(timer.done,
|
||||
timer.wait.eq(0),
|
||||
NextState("SEND_PATTERN")
|
||||
),
|
||||
serdes.tx.idle.eq(1)
|
||||
)
|
||||
fsm.act("SEND_PATTERN",
|
||||
If(~serdes.rx.idle,
|
||||
timer.wait.eq(1),
|
||||
If(timer.done,
|
||||
NextState("CHECK_PATTERN")
|
||||
)
|
||||
),
|
||||
serdes.tx.comma.eq(1)
|
||||
)
|
||||
fsm.act("WAIT_STABLE",
|
||||
timer.wait.eq(1),
|
||||
If(timer.done,
|
||||
timer.wait.eq(0),
|
||||
NextState("CHECK_PATTERN")
|
||||
),
|
||||
serdes.tx.comma.eq(1)
|
||||
)
|
||||
fsm.act("CHECK_PATTERN",
|
||||
If(serdes.rx.comma,
|
||||
timer.wait.eq(1),
|
||||
If(timer.done,
|
||||
NextState("READY")
|
||||
)
|
||||
).Else(
|
||||
NextState("INC_BITSLIP")
|
||||
),
|
||||
serdes.tx.comma.eq(1)
|
||||
)
|
||||
self.comb += serdes.rx.bitslip_value.eq(bitslip)
|
||||
fsm.act("INC_BITSLIP",
|
||||
NextState("WAIT_STABLE"),
|
||||
If(bitslip == (40 - 1),
|
||||
NextState("ERROR")
|
||||
).Else(
|
||||
NextValue(bitslip, bitslip + 1)
|
||||
),
|
||||
serdes.tx.comma.eq(1)
|
||||
)
|
||||
fsm.act("READY",
|
||||
self.ready.eq(1)
|
||||
)
|
||||
fsm.act("ERROR",
|
||||
self.error.eq(1)
|
||||
)
|
||||
|
||||
|
||||
@ResetInserter()
|
||||
class _SerdesSlaveInit(Module, AutoCSR):
|
||||
def __init__(self, serdes, timeout):
|
||||
self.ready = Signal()
|
||||
self.error = Signal()
|
||||
|
||||
# # #
|
||||
|
||||
self.bitslip = bitslip = Signal(max=40)
|
||||
|
||||
self.submodules.timer = timer = WaitTimer(timeout)
|
||||
|
||||
self.submodules.fsm = fsm = FSM(reset_state="IDLE")
|
||||
# reset
|
||||
fsm.act("IDLE",
|
||||
NextValue(bitslip, 0),
|
||||
timer.wait.eq(1),
|
||||
If(timer.done,
|
||||
timer.wait.eq(0),
|
||||
NextState("WAIT_STABLE"),
|
||||
),
|
||||
serdes.tx.idle.eq(1)
|
||||
)
|
||||
fsm.act("WAIT_STABLE",
|
||||
timer.wait.eq(1),
|
||||
If(timer.done,
|
||||
timer.wait.eq(0),
|
||||
NextState("CHECK_PATTERN")
|
||||
),
|
||||
serdes.tx.idle.eq(1)
|
||||
)
|
||||
fsm.act("CHECK_PATTERN",
|
||||
If(serdes.rx.comma,
|
||||
timer.wait.eq(1),
|
||||
If(timer.done,
|
||||
NextState("SEND_PATTERN")
|
||||
)
|
||||
).Else(
|
||||
NextState("INC_BITSLIP")
|
||||
),
|
||||
serdes.tx.idle.eq(1)
|
||||
)
|
||||
self.comb += serdes.rx.bitslip_value.eq(bitslip)
|
||||
fsm.act("INC_BITSLIP",
|
||||
NextState("WAIT_STABLE"),
|
||||
If(bitslip == (40 - 1),
|
||||
NextState("ERROR")
|
||||
).Else(
|
||||
NextValue(bitslip, bitslip + 1)
|
||||
),
|
||||
serdes.tx.idle.eq(1)
|
||||
)
|
||||
fsm.act("SEND_PATTERN",
|
||||
timer.wait.eq(1),
|
||||
If(timer.done,
|
||||
If(~serdes.rx.comma,
|
||||
NextState("READY")
|
||||
)
|
||||
),
|
||||
serdes.tx.comma.eq(1)
|
||||
)
|
||||
fsm.act("READY",
|
||||
self.ready.eq(1)
|
||||
)
|
||||
fsm.act("ERROR",
|
||||
self.error.eq(1)
|
||||
)
|
||||
|
||||
|
||||
class _SerdesControl(Module, AutoCSR):
|
||||
def __init__(self, serdes, init, mode="master"):
|
||||
if mode == "master":
|
||||
self.reset = CSR()
|
||||
self.ready = CSRStatus()
|
||||
self.error = CSRStatus()
|
||||
|
||||
self.bitslip = CSRStatus(6)
|
||||
|
||||
self.scrambling_enable = CSRStorage()
|
||||
|
||||
self.prbs_error = Signal()
|
||||
self.prbs_start = CSR()
|
||||
self.prbs_cycles = CSRStorage(32)
|
||||
self.prbs_errors = CSRStatus(32)
|
||||
|
||||
# # #
|
||||
|
||||
if mode == "master":
|
||||
# In Master mode, reset is coming from CSR,
|
||||
# it resets the Master that will also reset
|
||||
# the Slave by putting the link in idle.
|
||||
self.sync += init.reset.eq(self.reset.re)
|
||||
else:
|
||||
# In Slave mode, reset is coming from link,
|
||||
# Master reset the Slave by putting the link
|
||||
# in idle.
|
||||
self.sync += [
|
||||
init.reset.eq(serdes.rx.idle),
|
||||
serdes.reset.eq(serdes.rx.idle)
|
||||
]
|
||||
self.comb += [
|
||||
self.ready.status.eq(init.ready),
|
||||
self.error.status.eq(init.error),
|
||||
self.bitslip.status.eq(init.bitslip)
|
||||
]
|
||||
|
||||
# prbs
|
||||
prbs_cycles = Signal(32)
|
||||
prbs_errors = self.prbs_errors.status
|
||||
prbs_fsm = FSM(reset_state="IDLE")
|
||||
self.submodules += prbs_fsm
|
||||
prbs_fsm.act("IDLE",
|
||||
NextValue(prbs_cycles, 0),
|
||||
If(self.prbs_start.re,
|
||||
NextValue(prbs_errors, 0),
|
||||
NextState("CHECK")
|
||||
)
|
||||
)
|
||||
prbs_fsm.act("CHECK",
|
||||
NextValue(prbs_cycles, prbs_cycles + 1),
|
||||
If(self.prbs_error,
|
||||
NextValue(prbs_errors, prbs_errors + 1),
|
||||
),
|
||||
If(prbs_cycles == self.prbs_cycles.storage,
|
||||
NextState("IDLE")
|
||||
)
|
||||
)
|
||||
|
||||
|
||||
class SERWBPHY(Module, AutoCSR):
|
||||
def __init__(self, pads, mode="master", init_timeout=2**16):
|
||||
self.sink = sink = stream.Endpoint([("data", 32)])
|
||||
self.source = source = stream.Endpoint([("data", 32)])
|
||||
assert mode in ["master", "slave"]
|
||||
self.submodules.serdes = _Serdes(pads, mode)
|
||||
if mode == "master":
|
||||
self.submodules.init = _SerdesMasterInit(self.serdes, init_timeout)
|
||||
else:
|
||||
self.submodules.init = _SerdesSlaveInit(self.serdes, init_timeout)
|
||||
self.submodules.control = _SerdesControl(self.serdes, self.init, mode)
|
||||
|
||||
# scrambling
|
||||
scrambler = Scrambler()
|
||||
descrambler = Descrambler()
|
||||
self.submodules += scrambler, descrambler
|
||||
self.comb += [
|
||||
scrambler.enable.eq(self.control.scrambling_enable.storage),
|
||||
descrambler.enable.eq(self.control.scrambling_enable.storage)
|
||||
]
|
||||
|
||||
# tx dataflow
|
||||
self.comb += \
|
||||
If(self.init.ready,
|
||||
sink.connect(scrambler.sink),
|
||||
scrambler.source.ack.eq(self.serdes.tx.ce),
|
||||
If(scrambler.source.stb,
|
||||
self.serdes.tx.d.eq(scrambler.source.d),
|
||||
self.serdes.tx.k.eq(scrambler.source.k)
|
||||
)
|
||||
)
|
||||
|
||||
# rx dataflow
|
||||
self.comb += [
|
||||
If(self.init.ready,
|
||||
descrambler.sink.stb.eq(self.serdes.rx.ce),
|
||||
descrambler.sink.d.eq(self.serdes.rx.d),
|
||||
descrambler.sink.k.eq(self.serdes.rx.k),
|
||||
descrambler.source.connect(source)
|
||||
),
|
||||
# For PRBS test we are using the scrambler/descrambler as PRBS,
|
||||
# sending 0 to the scrambler and checking that descrambler
|
||||
# output is always 0.
|
||||
self.control.prbs_error.eq(
|
||||
descrambler.source.stb &
|
||||
descrambler.source.ack &
|
||||
(descrambler.source.data != 0))
|
||||
]
|
||||
Loading…
Reference in New Issue