forked from M-Labs/artiq
1
0
Fork 0

ad9858: make read timing configurable, increase read delays

This commit is contained in:
Sebastien Bourdeauducq 2015-05-05 19:33:34 +08:00
parent 6f7d74a765
commit 9072647bdc
1 changed files with 33 additions and 32 deletions

View File

@ -5,6 +5,21 @@ from migen.bus.transactions import *
from migen.sim.generic import run_simulation
class WaitTimer(Module):
def __init__(self, t):
self.wait = Signal()
self.done = Signal()
# # #
count = Signal(bits_for(t), reset=t)
self.comb += self.done.eq(count == 0)
self.sync += \
If(self.wait,
If(~self.done, count.eq(count - 1))
).Else(count.eq(count.reset))
class AD9858(Module):
"""Wishbone interface to the AD9858 DDS chip.
@ -33,7 +48,9 @@ class AD9858(Module):
Round-trip addr A setup (> RX, RD, D to Z), RD prop, D valid (< D
valid), D prop is ~15 + 10 + 20 + 10 = 55ns
"""
def __init__(self, pads, drive_fud=False, bus=None):
def __init__(self, pads, drive_fud=False,
read_wait_cycles=10, hiz_wait_cycles=3,
bus=None):
if bus is None:
bus = wishbone.Interface()
self.bus = bus
@ -42,10 +59,11 @@ class AD9858(Module):
dts = TSTriple(8)
self.specials += dts.get_tristate(pads.d)
hold_address = Signal()
dr = Signal(8)
rx = Signal()
self.sync += [
pads.a.eq(bus.adr),
If(~hold_address, pads.a.eq(bus.adr)),
dts.o.eq(bus.dat_w),
dr.eq(dts.i),
dts.oe.eq(~rx)
@ -76,6 +94,9 @@ class AD9858(Module):
rd = Signal()
self.sync += pads.wr_n.eq(~wr), pads.rd_n.eq(~rd)
self.submodules.read_timer = WaitTimer(read_wait_cycles)
self.submodules.hiz_timer = WaitTimer(hiz_wait_cycles)
fsm = FSM("IDLE")
self.submodules += fsm
@ -112,38 +133,18 @@ class AD9858(Module):
# 15ns D valid to RD active
rx.eq(1),
rd.eq(1),
NextState("READ0")
)
fsm.act("READ0",
rx.eq(1),
rd.eq(1),
NextState("READ1")
)
fsm.act("READ1",
rx.eq(1),
rd.eq(1),
NextState("READ2")
)
fsm.act("READ2",
rx.eq(1),
rd.eq(1),
NextState("READ3")
)
fsm.act("READ3",
rx.eq(1),
rd.eq(1),
NextState("READ4")
)
fsm.act("READ4",
rx.eq(1),
NextState("READ5")
)
fsm.act("READ5",
# 5ns D three-state to RD inactive
# 10ns A hold to RD inactive
rx.eq(1),
self.read_timer.wait.eq(1),
If(self.read_timer.done,
bus.ack.eq(1),
NextState("IDLE")
NextState("WAIT_HIZ")
)
)
fsm.act("WAIT_HIZ",
rx.eq(1),
# For some reason, AD9858 has a address hold time to RD inactive.
hold_address.eq(1),
self.hiz_timer.wait.eq(1),
If(self.hiz_timer.done, NextState("IDLE"))
)
if drive_fud:
fsm.act("FUD",