firmware: fix sayma_amc_standalone build with sawg.

artiq/firmware/libboard_artiq/ad9154.rs

@@ -1,5 +1,4 @@
-use csr;
-use clock;
+use board::{csr, clock};
 use ad9154_reg;
 
 fn spi_setup(dacno: u8) {

artiq/firmware/libboard_artiq/hmc830_7043.rs

@@ -11,7 +11,7 @@
  */
 
 mod clock_mux {
-    use csr;
+    use board::csr;
 
     const CLK_SRC_EXT_SEL : u8 = 1 << 0;
     const REF_CLK_SRC_SEL : u8 = 1 << 1;
@@ -28,8 +28,7 @@ mod clock_mux {
 }
 
 mod hmc830 {
-    use clock;
-    use csr;
+    use board::{csr, clock};
 
     const HMC830_WRITES: [(u8, u32); 16] = [
         (0x0, 0x20),
@@ -117,7 +116,7 @@ mod hmc830 {
 }
 
 mod hmc7043 {
-    use csr;
+    use board::csr;
 
     include!(concat!(env!("OUT_DIR"), "/hmc7043_writes.rs"));
 

artiq/firmware/libboard_artiq/serwb.rs

@@ -1,4 +1,4 @@
-use csr;
+use board::csr;
 
 pub fn wait_init() {
     info!("waiting for AMC/RTM serwb bridge to be ready...");

artiq/firmware/libboard_artiq/spi.rs

@@ -1,7 +1,7 @@
 #[cfg(has_converter_spi)]
-use csr;
+mod imp {
+    use board::csr;
 
-#[cfg(has_converter_spi)]
     pub fn set_config(busno: u8, flags: u8, write_div: u8, read_div: u8) -> Result<(), ()> {
         if busno != 0 {
             return Err(())
@@ -20,8 +20,8 @@ pub fn set_config(busno: u8, flags: u8, write_div: u8, read_div: u8) -> Result<(
         Ok(())
     }
 
-#[cfg(has_converter_spi)]
-pub fn set_xfer(busno: u8, chip_select: u16, write_length: u8, read_length: u8) -> Result<(), ()> {
+    pub fn set_xfer(busno: u8, chip_select: u16, write_length: u8, read_length: u8)
+                   -> Result<(), ()> {
         if busno != 0 {
             return Err(())
         }
@@ -33,7 +33,6 @@ pub fn set_xfer(busno: u8, chip_select: u16, write_length: u8, read_length: u8)
         Ok(())
     }
 
-#[cfg(has_converter_spi)]
     pub fn write(busno: u8, data: u32) -> Result<(), ()> {
         if busno != 0 {
             return Err(())
@@ -46,7 +45,6 @@ pub fn write(busno: u8, data: u32) -> Result<(), ()> {
         Ok(())
     }
 
-#[cfg(has_converter_spi)]
     pub fn read(busno: u8) -> Result<u32, ()> {
         if busno != 0 {
             return Err(())
@@ -55,12 +53,15 @@ pub fn read(busno: u8) -> Result<u32, ()> {
             csr::converter_spi::data_read_read()
         })
     }
+}
 
 #[cfg(not(has_converter_spi))]
+mod imp {
     pub fn set_config(_busno: u8, _flags: u8, _write_div: u8, _read_div: u8) -> Result<(), ()> { Err(()) }
-#[cfg(not(has_converter_spi))]
-pub fn set_xfer(_busno: u8,_chip_select: u16, _write_length: u8, _read_length: u8) -> Result<(), ()> { Err(()) }
-#[cfg(not(has_converter_spi))]
+    pub fn set_xfer(_busno: u8,_chip_select: u16, _write_length: u8, _read_length: u8)
+                   -> Result<(), ()> { Err(()) }
     pub fn write(_busno: u8,_data: u32) -> Result<(), ()> { Err(()) }
-#[cfg(not(has_converter_spi))]
     pub fn read(_busno: u8,) -> Result<u32, ()> { Err(()) }
+}
+
+pub use self::imp::*;

artiq/firmware/runtime/lib.rs

@@ -56,7 +56,7 @@ fn startup() {
     info!("gateware version {}", board::ident::read(&mut [0; 64]));
 
     #[cfg(has_serwb_phy_amc)]
-    board::serwb::wait_init();
+    board_artiq::serwb::wait_init();
 
     let t = board::clock::get_ms();
     info!("press 'e' to erase startup and idle kernels...");
@@ -75,9 +75,9 @@ fn startup() {
     #[cfg(si5324_free_running)]
     setup_si5324_free_running();
     #[cfg(has_hmc830_7043)]
-    board::hmc830_7043::init().expect("cannot initialize HMC830/7043");
+    board_artiq::hmc830_7043::init().expect("cannot initialize HMC830/7043");
     #[cfg(has_ad9154)]
-    board::ad9154::init().expect("cannot initialize AD9154");
+    board_artiq::ad9154::init().expect("cannot initialize AD9154");
 
     #[cfg(has_ethmac)]
     startup_ethernet();