forked from M-Labs/artiq
1
0
Fork 0

phaser: 10G line rate

This commit is contained in:
Robert Jördens 2016-10-13 21:47:34 +02:00
parent 42c6658ffe
commit 89150c9817
3 changed files with 89 additions and 84 deletions

View File

@ -109,7 +109,7 @@ class DACSetup(EnvExperiment):
self.ad9154.dac_write(AD9154_SPI_PAGEINDX, 0x3) # A and B dual self.ad9154.dac_write(AD9154_SPI_PAGEINDX, 0x3) # A and B dual
self.ad9154.dac_write(AD9154_INTERP_MODE, 4) # 8x self.ad9154.dac_write(AD9154_INTERP_MODE, 3) # 4x
self.ad9154.dac_write(AD9154_MIX_MODE, 0) self.ad9154.dac_write(AD9154_MIX_MODE, 0)
self.ad9154.dac_write(AD9154_DATA_FORMAT, AD9154_BINARY_FORMAT_SET(0)) # s16 self.ad9154.dac_write(AD9154_DATA_FORMAT, AD9154_BINARY_FORMAT_SET(0)) # s16
self.ad9154.dac_write(AD9154_DATAPATH_CTRL, self.ad9154.dac_write(AD9154_DATAPATH_CTRL,
@ -198,11 +198,11 @@ class DACSetup(EnvExperiment):
self.ad9154.dac_write(AD9154_SERDES_SPI_REG, 1) self.ad9154.dac_write(AD9154_SERDES_SPI_REG, 1)
self.ad9154.dac_write(AD9154_CDR_OPERATING_MODE_REG_0, self.ad9154.dac_write(AD9154_CDR_OPERATING_MODE_REG_0,
AD9154_CDR_OVERSAMP_SET(0) | AD9154_CDR_RESERVED_SET(0x2) | AD9154_CDR_OVERSAMP_SET(0) | AD9154_CDR_RESERVED_SET(0x2) |
AD9154_ENHALFRATE_SET(0)) AD9154_ENHALFRATE_SET(1))
self.ad9154.dac_write(AD9154_CDR_RESET, 0) self.ad9154.dac_write(AD9154_CDR_RESET, 0)
self.ad9154.dac_write(AD9154_CDR_RESET, 1) self.ad9154.dac_write(AD9154_CDR_RESET, 1)
self.ad9154.dac_write(AD9154_REF_CLK_DIVIDER_LDO, self.ad9154.dac_write(AD9154_REF_CLK_DIVIDER_LDO,
AD9154_SPI_CDR_OVERSAMP_SET(0x1) | AD9154_SPI_CDR_OVERSAMP_SET(0x0) |
AD9154_SPI_LDO_BYPASS_FILT_SET(1) | AD9154_SPI_LDO_BYPASS_FILT_SET(1) |
AD9154_SPI_LDO_REF_SEL_SET(0)) AD9154_SPI_LDO_REF_SEL_SET(0))
self.ad9154.dac_write(AD9154_LDO_FILTER_1, 0x62) # magic self.ad9154.dac_write(AD9154_LDO_FILTER_1, 0x62) # magic

View File

@ -47,17 +47,17 @@ class StartupKernel(EnvExperiment):
self.ad9154.clock_write(AD9516_OUT1, 0*AD9516_OUT1_POWER_DOWN | self.ad9154.clock_write(AD9516_OUT1, 0*AD9516_OUT1_POWER_DOWN |
2*AD9516_OUT1_LVPECLDIFFERENTIAL_VOLTAGE) 2*AD9516_OUT1_LVPECLDIFFERENTIAL_VOLTAGE)
# FPGA deviceclk, dclk/4 # FPGA deviceclk, dclk/2
self.ad9154.clock_write(AD9516_DIVIDER_4_3, AD9516_DIVIDER_4_BYPASS_2) self.ad9154.clock_write(AD9516_DIVIDER_4_3, AD9516_DIVIDER_4_BYPASS_2)
self.ad9154.clock_write(AD9516_DIVIDER_4_0, self.ad9154.clock_write(AD9516_DIVIDER_4_0,
(4//2-1)*AD9516_DIVIDER_0_HIGH_CYCLES | (2//2-1)*AD9516_DIVIDER_0_HIGH_CYCLES |
(4//2-1)*AD9516_DIVIDER_0_LOW_CYCLES) (2//2-1)*AD9516_DIVIDER_0_LOW_CYCLES)
self.ad9154.clock_write(AD9516_DIVIDER_4_4, 0*AD9516_DIVIDER_4_DCCOFF) self.ad9154.clock_write(AD9516_DIVIDER_4_4, 0*AD9516_DIVIDER_4_DCCOFF)
self.ad9154.clock_write(AD9516_OUT9, 1*AD9516_OUT9_LVDS_OUTPUT_CURRENT | self.ad9154.clock_write(AD9516_OUT9, 1*AD9516_OUT9_LVDS_OUTPUT_CURRENT |
2*AD9516_OUT9_LVDS_CMOS_OUTPUT_POLARITY | 2*AD9516_OUT9_LVDS_CMOS_OUTPUT_POLARITY |
0*AD9516_OUT9_SELECT_LVDS_CMOS) 0*AD9516_OUT9_SELECT_LVDS_CMOS)
# sysref f_data*S/(K*F), dclk/64 # sysref f_data*S/(K*F), dclk/32
self.ad9154.clock_write(AD9516_DIVIDER_3_0, (32//2-1)*AD9516_DIVIDER_3_HIGH_CYCLES_1 | self.ad9154.clock_write(AD9516_DIVIDER_3_0, (32//2-1)*AD9516_DIVIDER_3_HIGH_CYCLES_1 |
(32//2-1)*AD9516_DIVIDER_3_LOW_CYCLES_1) (32//2-1)*AD9516_DIVIDER_3_LOW_CYCLES_1)
self.ad9154.clock_write(AD9516_DIVIDER_3_1, 0*AD9516_DIVIDER_3_PHASE_OFFSET_1 | self.ad9154.clock_write(AD9516_DIVIDER_3_1, 0*AD9516_DIVIDER_3_PHASE_OFFSET_1 |

View File

@ -398,19 +398,10 @@ class _PhaserCRG(Module, AutoCSR):
self._clock_sel = CSRStorage() self._clock_sel = CSRStorage()
self._pll_reset = CSRStorage(reset=1) self._pll_reset = CSRStorage(reset=1)
self._pll_locked = CSRStatus() self._pll_locked = CSRStatus()
self.refclk = Signal()
self.clock_domains.cd_rtio = ClockDomain() self.clock_domains.cd_rtio = ClockDomain()
self.clock_domains.cd_rtiox4 = ClockDomain(reset_less=True) self.clock_domains.cd_rtiox4 = ClockDomain(reset_less=True)
refclk_pads = platform.request("ad9154_refclk")
platform.add_period_constraint(refclk_pads.p, 8.)
self.refclk = Signal()
self.clock_domains.cd_refclk = ClockDomain()
self.specials += [
Instance("IBUFDS_GTE2", i_CEB=0,
i_I=refclk_pads.p, i_IB=refclk_pads.n, o_O=self.refclk),
Instance("BUFG", i_I=self.refclk, o_O=self.cd_refclk.clk),
]
pll_locked = Signal() pll_locked = Signal()
rtio_clk = Signal() rtio_clk = Signal()
rtiox4_clk = Signal() rtiox4_clk = Signal()
@ -419,13 +410,13 @@ class _PhaserCRG(Module, AutoCSR):
p_STARTUP_WAIT="FALSE", o_LOCKED=pll_locked, p_STARTUP_WAIT="FALSE", o_LOCKED=pll_locked,
p_REF_JITTER1=0.01, p_REF_JITTER2=0.01, p_REF_JITTER1=0.01, p_REF_JITTER2=0.01,
p_CLKIN1_PERIOD=8.0, p_CLKIN2_PERIOD=8.0, p_CLKIN1_PERIOD=4.0, p_CLKIN2_PERIOD=4.0,
i_CLKIN1=rtio_internal_clk, i_CLKIN2=self.cd_refclk.clk, i_CLKIN1=0, i_CLKIN2=self.refclk,
# Warning: CLKINSEL=0 means CLKIN2 is selected # Warning: CLKINSEL=0 means CLKIN2 is selected
i_CLKINSEL=~self._clock_sel.storage, i_CLKINSEL=~self._clock_sel.storage,
# VCO @ 1GHz when using 125MHz input # VCO @ 1GHz when using 125MHz input
p_CLKFBOUT_MULT=8, p_DIVCLK_DIVIDE=1, p_CLKFBOUT_MULT=8, p_DIVCLK_DIVIDE=2,
i_CLKFBIN=self.cd_rtio.clk, i_CLKFBIN=self.cd_rtio.clk,
i_RST=self._pll_reset.storage, i_RST=self._pll_reset.storage,
@ -436,70 +427,95 @@ class _PhaserCRG(Module, AutoCSR):
), ),
Instance("BUFG", i_I=rtio_clk, o_O=self.cd_rtio.clk), Instance("BUFG", i_I=rtio_clk, o_O=self.cd_rtio.clk),
Instance("BUFG", i_I=rtiox4_clk, o_O=self.cd_rtiox4.clk), Instance("BUFG", i_I=rtiox4_clk, o_O=self.cd_rtiox4.clk),
AsyncResetSynchronizer(self.cd_rtio, ~pll_locked), AsyncResetSynchronizer(self.cd_rtio, ~pll_locked),
MultiReg(pll_locked, self._pll_locked.status) MultiReg(pll_locked | ~self._clock_sel.storage,
self._pll_locked.status)
] ]
class AD9154(Module, AutoCSR): class AD9154JESD(Module, AutoCSR):
def __init__(self, platform, rtio_crg): def __init__(self, platform):
ad9154_spi = platform.request("ad9154_spi")
self.submodules.spi = spi_csr.SPIMaster(ad9154_spi)
self.comb += [
ad9154_spi.en.eq(1),
platform.request("ad9154_txen", 0).eq(1),
platform.request("ad9154_txen", 1).eq(1),
]
sync_pads = platform.request("ad9154_sync")
jesd_sync = Signal()
self.specials += DifferentialInput(
sync_pads.p, sync_pads.n, jesd_sync)
self.jesd_sync = jesd_sync
ps = JESD204BPhysicalSettings(l=4, m=4, n=16, np=16) ps = JESD204BPhysicalSettings(l=4, m=4, n=16, np=16)
ts = JESD204BTransportSettings(f=2, s=1, k=16, cs=1) ts = JESD204BTransportSettings(f=2, s=1, k=16, cs=1)
jesd_settings = JESD204BSettings(ps, ts, did=0x5a, bid=0x5) settings = JESD204BSettings(ps, ts, did=0x5a, bid=0x5)
jesd_linerate = 5e9 linerate = 10e9
jesd_refclk_freq = 125e6 refclk_freq = 250e6
rtio_freq = 125*1000*1000 fabric_freq = 250*1000*1000
jesd_qpll = GTXQuadPLL(
rtio_crg.refclk, jesd_refclk_freq, jesd_linerate) sync_pads = platform.request("ad9154_sync")
self.submodules += jesd_qpll self.jsync = Signal()
jesd_phys = [] self.refclk = Signal()
self.specials += DifferentialInput(
sync_pads.p, sync_pads.n, self.jsync)
self.clock_domains.cd_jesd = ClockDomain()
refclk_pads = platform.request("ad9154_refclk")
platform.add_period_constraint(refclk_pads.p, 1e9/refclk_freq)
self.specials += [
Instance("IBUFDS_GTE2", i_CEB=0,
i_I=refclk_pads.p, i_IB=refclk_pads.n, o_O=self.refclk),
Instance("BUFR", i_I=self.refclk, o_O=self.cd_jesd.clk),
AsyncResetSynchronizer(self.cd_jesd, ResetSignal("rio_phy")),
]
qpll = GTXQuadPLL(self.refclk, refclk_freq, linerate)
self.submodules += qpll
phys = []
for i in range(4): for i in range(4):
jesd_phy = JESD204BPhyTX( phy = JESD204BPhyTX(
jesd_qpll, platform.request("ad9154_jesd", i), qpll, platform.request("ad9154_jesd", i), fabric_freq)
rtio_freq) platform.add_period_constraint(phy.gtx.cd_tx.clk, 40*1e9/linerate)
platform.add_period_constraint(
jesd_phy.gtx.cd_tx.clk,
40/jesd_linerate*1e9)
platform.add_false_path_constraints( platform.add_false_path_constraints(
rtio_crg.cd_rtio.clk, self.cd_jesd.clk,
jesd_phy.gtx.cd_tx.clk) phy.gtx.cd_tx.clk)
jesd_phys.append(jesd_phy) phys.append(phy)
setattr(self.submodules, "jesd_phy"+str(i), jesd_phy) to_jesd = ClockDomainsRenamer("jesd")
self.submodules.jesd_core = JESD204BCoreTX( self.submodules.core = to_jesd(JESD204BCoreTX(phys, settings,
jesd_phys, jesd_settings, converter_data_width=32) converter_data_width=32))
self.comb += self.jesd_core.start.eq(jesd_sync) self.submodules.control = to_jesd(JESD204BCoreTXControl(self.core))
self.comb += platform.request("user_led", 3).eq(jesd_sync)
self.submodules.jesd_control = JESD204BCoreTXControl(self.jesd_core) self.comb += [
platform.request("ad9154_txen", 0).eq(1),
platform.request("ad9154_txen", 1).eq(1),
self.core.start.eq(self.jsync),
platform.request("user_led", 3).eq(self.jsync),
]
# blinking leds for transceiver reset status # blinking leds for transceiver reset status
for i in range(4): for i in range(4):
led = platform.request("user_led", 4 + i) led = platform.request("user_led", 4 + i)
counter = Signal(32) counter = Signal(max=fabric_freq//2 + 1)
sync = getattr(self.sync, "phy" + str(i)) sync = getattr(self.sync, "phy{}_tx".format(i))
sync += \ sync += \
If(counter == 0, If(counter == 0,
led.eq(~led), led.eq(~led),
counter.eq(rtio_freq//2) counter.eq(fabric_freq//2)
).Else( ).Else(
counter.eq(counter-1) counter.eq(counter - 1)
) )
class AD9154(Module, AutoCSR):
def __init__(self, platform):
ad9154_spi = platform.request("ad9154_spi")
self.comb += ad9154_spi.en.eq(1)
self.submodules.spi = spi_csr.SPIMaster(ad9154_spi)
self.submodules.jesd = AD9154JESD(platform)
self.sawgs = [sawg.Channel(width=16, parallelism=4) for i in range(4)]
self.submodules += self.sawgs
x = Signal()
y = Signal()
self.sync.jesd += x.eq(~x)
self.sync.rio_phy += y.eq(x)
for conv, ch in zip(self.jesd.core.sink.flatten(), self.sawgs):
self.comb += conv.eq(Mux(x != y, Cat(ch.o[:2]), Cat(ch.o[2:])))
class Phaser(_NIST_Ions): class Phaser(_NIST_Ions):
mem_map = { mem_map = {
"ad9154": 0x50000000, "ad9154": 0x50000000,
@ -512,7 +528,10 @@ class Phaser(_NIST_Ions):
platform = self.platform platform = self.platform
platform.add_extension(phaser.fmc_adapter_io) platform.add_extension(phaser.fmc_adapter_io)
sysref_pads = platform.request("ad9154_sysref") self.submodules.ad9154 = AD9154(platform)
self.register_kernel_cpu_csrdevice("ad9154")
self.config["AD9154_DAC_CS"] = 1 << 0
self.config["AD9154_CLK_CS"] = 1 << 1
rtio_channels = [] rtio_channels = []
@ -525,13 +544,13 @@ class Phaser(_NIST_Ions):
self.submodules += phy self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy)) rtio_channels.append(rtio.Channel.from_phy(phy))
sysref_pads = platform.request("ad9154_sysref")
phy = ttl_serdes_7series.Input_8X(sysref_pads.p, sysref_pads.n) phy = ttl_serdes_7series.Input_8X(sysref_pads.p, sysref_pads.n)
self.submodules += phy self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy, ififo_depth=32, rtio_channels.append(rtio.Channel.from_phy(phy, ififo_depth=32,
ofifo_depth=2)) ofifo_depth=2))
jesd_sync = Signal() phy = ttl_simple.Input(self.ad9154.jesd.jsync)
phy = ttl_simple.Input(jesd_sync)
self.submodules += phy self.submodules += phy
rtio_channels.append(rtio.Channel.from_phy(phy, ififo_depth=32, rtio_channels.append(rtio.Channel.from_phy(phy, ififo_depth=32,
ofifo_depth=2)) ofifo_depth=2))
@ -539,29 +558,15 @@ class Phaser(_NIST_Ions):
self.config["RTIO_REGULAR_TTL_COUNT"] = len(rtio_channels) self.config["RTIO_REGULAR_TTL_COUNT"] = len(rtio_channels)
self.config["RTIO_FIRST_SAWG_CHANNEL"] = len(rtio_channels) self.config["RTIO_FIRST_SAWG_CHANNEL"] = len(rtio_channels)
sawgs = [sawg.Channel(width=16, parallelism=4) for i in range(4)]
self.submodules += sawgs
rtio_channels.extend(rtio.Channel.from_phy(phy) rtio_channels.extend(rtio.Channel.from_phy(phy)
for sawg in sawgs for sawg in self.ad9154.sawgs
for phy in sawg.phys) for phy in sawg.phys)
self.config["RTIO_LOG_CHANNEL"] = len(rtio_channels) self.config["RTIO_LOG_CHANNEL"] = len(rtio_channels)
rtio_channels.append(rtio.LogChannel()) rtio_channels.append(rtio.LogChannel())
self.add_rtio(rtio_channels, _PhaserCRG(platform, self.crg.cd_sys.clk)) self.add_rtio(rtio_channels, _PhaserCRG(platform, self.crg.cd_sys.clk))
to_rtio = ClockDomainsRenamer({"sys": "rtio"}) self.comb += self.rtio_crg.refclk.eq(self.ad9154.jesd.refclk)
self.submodules.ad9154 = to_rtio(AD9154(platform, self.rtio_crg))
self.register_kernel_cpu_csrdevice("ad9154")
self.config["AD9154_DAC_CS"] = 1 << 0
self.config["AD9154_CLK_CS"] = 1 << 1
for i, ch in enumerate(sawgs):
conv = getattr(self.ad9154.jesd_core.sink,
"converter{}".format(i))
# while at 5 GBps, take every second sample... FIXME
self.comb += conv.eq(Cat(ch.o[::2]))
self.comb += jesd_sync.eq(self.ad9154.jesd_sync)
def main(): def main():