forked from M-Labs/artiq
1
0
Fork 0

runtime: refactor startup and RTIO clocking initialization

This commit is contained in:
Sebastien Bourdeauducq 2019-06-14 15:26:30 +08:00
parent 43e58c939c
commit 87ce24e867
4 changed files with 188 additions and 197 deletions

View File

@ -41,6 +41,7 @@ use proto_artiq::{mgmt_proto, moninj_proto, rpc_proto, session_proto, kernel_pro
#[cfg(has_rtio_analyzer)] #[cfg(has_rtio_analyzer)]
use proto_artiq::analyzer_proto; use proto_artiq::analyzer_proto;
mod rtio_clocking;
mod rtio_mgt; mod rtio_mgt;
mod urc; mod urc;
@ -59,14 +60,15 @@ mod moninj;
#[cfg(has_rtio_analyzer)] #[cfg(has_rtio_analyzer)]
mod analyzer; mod analyzer;
fn startup() { #[cfg(has_grabber)]
irq::set_mask(0); fn grabber_thread(io: sched::Io) {
irq::set_ie(true); loop {
clock::init(); board_artiq::grabber::tick();
info!("ARTIQ runtime starting..."); io.sleep(200).unwrap();
info!("software ident {}", csr::CONFIG_IDENTIFIER_STR); }
info!("gateware ident {}", ident::read(&mut [0; 64])); }
fn setup_log_levels() {
match config::read_str("log_level", |r| r.map(|s| s.parse())) { match config::read_str("log_level", |r| r.map(|s| s.parse())) {
Ok(Ok(log_level_filter)) => { Ok(Ok(log_level_filter)) => {
info!("log level set to {} by `log_level` config key", info!("log level set to {} by `log_level` config key",
@ -84,30 +86,14 @@ fn startup() {
} }
_ => info!("UART log level set to INFO by default") _ => info!("UART log level set to INFO by default")
} }
}
fn sayma_hw_init() {
#[cfg(has_slave_fpga_cfg)] #[cfg(has_slave_fpga_cfg)]
board_artiq::slave_fpga::load().expect("cannot load RTM FPGA gateware"); board_artiq::slave_fpga::load().expect("cannot load RTM FPGA gateware");
#[cfg(has_serwb_phy_amc)] #[cfg(has_serwb_phy_amc)]
board_artiq::serwb::wait_init(); board_artiq::serwb::wait_init();
#[cfg(has_uart)] {
let t = clock::get_ms();
info!("press 'e' to erase startup and idle kernels...");
while clock::get_ms() < t + 1000 {
if unsafe { csr::uart::rxtx_read() == b'e' } {
config::remove("startup_kernel").unwrap();
config::remove("idle_kernel").unwrap();
info!("startup and idle kernels erased");
break
}
}
info!("continuing boot");
}
#[cfg(has_i2c)]
board_artiq::i2c::init();
#[cfg(si5324_as_synthesizer)]
setup_si5324_as_synthesizer();
#[cfg(has_hmc830_7043)] #[cfg(has_hmc830_7043)]
/* must be the first SPI init because of HMC830 SPI mode selection */ /* must be the first SPI init because of HMC830 SPI mode selection */
board_artiq::hmc830_7043::init().expect("cannot initialize HMC830/7043"); board_artiq::hmc830_7043::init().expect("cannot initialize HMC830/7043");
@ -124,98 +110,22 @@ fn startup() {
} }
#[cfg(has_allaki_atts)] #[cfg(has_allaki_atts)]
board_artiq::hmc542::program_all(8/*=4dB*/); board_artiq::hmc542::program_all(8/*=4dB*/);
#[cfg(has_ethmac)]
startup_ethernet();
#[cfg(not(has_ethmac))]
{
info!("done");
loop {}
}
} }
#[cfg(si5324_as_synthesizer)] fn startup() {
fn setup_si5324_as_synthesizer() irq::set_mask(0);
{ irq::set_ie(true);
// 125MHz output, from 100MHz CLKIN2 reference, 586 Hz loop bandwidth clock::init();
#[cfg(all(rtio_frequency = "125.0", si5324_ext_ref, ext_ref_frequency = "100.0"))] info!("ARTIQ runtime starting...");
const SI5324_SETTINGS: board_artiq::si5324::FrequencySettings info!("software ident {}", csr::CONFIG_IDENTIFIER_STR);
= board_artiq::si5324::FrequencySettings { info!("gateware ident {}", ident::read(&mut [0; 64]));
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 260,
n31 : 65,
n32 : 52,
bwsel : 4,
crystal_ref: false
};
// 125MHz output, from 125MHz CLKIN2 reference, 606 Hz loop bandwidth
#[cfg(all(rtio_frequency = "125.0", si5324_ext_ref, ext_ref_frequency = "125.0"))]
const SI5324_SETTINGS: board_artiq::si5324::FrequencySettings
= board_artiq::si5324::FrequencySettings {
n1_hs : 5,
nc1_ls : 8,
n2_hs : 7,
n2_ls : 360,
n31 : 63,
n32 : 63,
bwsel : 4,
crystal_ref: false
};
// 125MHz output, from crystal, 7 Hz
#[cfg(all(rtio_frequency = "125.0", not(si5324_ext_ref)))]
const SI5324_SETTINGS: board_artiq::si5324::FrequencySettings
= board_artiq::si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 19972,
n31 : 4993,
n32 : 4565,
bwsel : 4,
crystal_ref: true
};
// 150MHz output, from crystal
#[cfg(all(rtio_frequency = "150.0", not(si5324_ext_ref)))]
const SI5324_SETTINGS: board_artiq::si5324::FrequencySettings
= board_artiq::si5324::FrequencySettings {
n1_hs : 9,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 33732,
n31 : 9370,
n32 : 7139,
bwsel : 3,
crystal_ref: true
};
// 100MHz output, from crystal. Also used as reference for Sayma HMC830.
#[cfg(all(rtio_frequency = "100.0", not(si5324_ext_ref)))]
const SI5324_SETTINGS: board_artiq::si5324::FrequencySettings
= board_artiq::si5324::FrequencySettings {
n1_hs : 9,
nc1_ls : 6,
n2_hs : 10,
n2_ls : 33732,
n31 : 9370,
n32 : 7139,
bwsel : 3,
crystal_ref: true
};
board_artiq::si5324::setup(&SI5324_SETTINGS,
board_artiq::si5324::Input::Ckin2).expect("cannot initialize Si5324");
}
#[cfg(has_grabber)] setup_log_levels();
fn grabber_thread(io: sched::Io) { #[cfg(has_i2c)]
loop { board_artiq::i2c::init();
board_artiq::grabber::tick(); sayma_hw_init();
io.sleep(200).unwrap(); rtio_clocking::init();
}
}
#[cfg(has_ethmac)]
fn startup_ethernet() {
let hardware_addr; let hardware_addr;
match config::read_str("mac", |r| r.map(|s| s.parse())) { match config::read_str("mac", |r| r.map(|s| s.parse())) {
Ok(Ok(addr)) => { Ok(Ok(addr)) => {

View File

@ -0,0 +1,162 @@
use board_misoc::config;
#[cfg(si5324_as_synthesizer)]
use board_artiq::si5324;
#[cfg(has_drtio)]
use board_misoc::csr;
#[derive(Debug)]
pub enum RtioClock {
Internal = 0,
External = 1
}
fn get_rtio_clock_cfg() -> RtioClock {
config::read("rtio_clock", |result| {
match result {
Ok(b"i") => {
info!("using internal RTIO clock");
RtioClock::Internal
},
Ok(b"e") => {
info!("using external RTIO clock");
RtioClock::External
},
_ => {
info!("using internal RTIO clock (by default)");
RtioClock::Internal
},
}
})
}
#[cfg(has_rtio_crg)]
pub mod crg {
#[cfg(has_rtio_clock_switch)]
use super::RtioClock;
use board_misoc::{clock, csr};
pub fn check() -> bool {
unsafe { csr::rtio_crg::pll_locked_read() != 0 }
}
#[cfg(has_rtio_clock_switch)]
pub fn init(clk: RtioClock) -> bool {
unsafe {
csr::rtio_crg::pll_reset_write(1);
csr::rtio_crg::clock_sel_write(clk as u8);
csr::rtio_crg::pll_reset_write(0);
}
clock::spin_us(150);
return check()
}
#[cfg(not(has_rtio_clock_switch))]
pub fn init() -> bool {
unsafe {
csr::rtio_crg::pll_reset_write(0);
}
clock::spin_us(150);
return check()
}
}
#[cfg(not(has_rtio_crg))]
pub mod crg {
pub fn check() -> bool { true }
}
#[cfg(si5324_as_synthesizer)]
fn setup_si5324_as_synthesizer() {
// 125MHz output, from 100MHz CLKIN2 reference, 586 Hz loop bandwidth
#[cfg(all(rtio_frequency = "125.0", si5324_ext_ref, ext_ref_frequency = "100.0"))]
const SI5324_SETTINGS: si5324::FrequencySettings
= si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 260,
n31 : 65,
n32 : 52,
bwsel : 4,
crystal_ref: false
};
// 125MHz output, from 125MHz CLKIN2 reference, 606 Hz loop bandwidth
#[cfg(all(rtio_frequency = "125.0", si5324_ext_ref, ext_ref_frequency = "125.0"))]
const SI5324_SETTINGS: si5324::FrequencySettings
= si5324::FrequencySettings {
n1_hs : 5,
nc1_ls : 8,
n2_hs : 7,
n2_ls : 360,
n31 : 63,
n32 : 63,
bwsel : 4,
crystal_ref: false
};
// 125MHz output, from crystal, 7 Hz
#[cfg(all(rtio_frequency = "125.0", not(si5324_ext_ref)))]
const SI5324_SETTINGS: si5324::FrequencySettings
= si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 19972,
n31 : 4993,
n32 : 4565,
bwsel : 4,
crystal_ref: true
};
// 150MHz output, from crystal
#[cfg(all(rtio_frequency = "150.0", not(si5324_ext_ref)))]
const SI5324_SETTINGS: si5324::FrequencySettings
= si5324::FrequencySettings {
n1_hs : 9,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 33732,
n31 : 9370,
n32 : 7139,
bwsel : 3,
crystal_ref: true
};
// 100MHz output, from crystal. Also used as reference for Sayma HMC830.
#[cfg(all(rtio_frequency = "100.0", not(si5324_ext_ref)))]
const SI5324_SETTINGS: si5324::FrequencySettings
= si5324::FrequencySettings {
n1_hs : 9,
nc1_ls : 6,
n2_hs : 10,
n2_ls : 33732,
n31 : 9370,
n32 : 7139,
bwsel : 3,
crystal_ref: true
};
si5324::setup(&SI5324_SETTINGS, si5324::Input::Ckin2).expect("cannot initialize Si5324");
}
pub fn init() {
#[cfg(si5324_as_synthesizer)]
setup_si5324_as_synthesizer();
#[cfg(has_drtio)]
unsafe {
csr::drtio_transceiver::stable_clkin_write(1);
}
#[cfg(has_rtio_crg)]
{
#[cfg(has_rtio_clock_switch)]
{
if !crg::init(get_rtio_clock_cfg()) {
error!("RTIO clock failed");
}
}
#[cfg(not(has_rtio_clock_switch))]
{
if !crg::init() {
error!("RTIO clock failed");
}
}
}
}

View File

@ -3,46 +3,10 @@ use urc::Urc;
use board_misoc::csr; use board_misoc::csr;
#[cfg(has_drtio)] #[cfg(has_drtio)]
use board_misoc::clock; use board_misoc::clock;
#[cfg(has_rtio_clock_switch)]
use board_misoc::config;
use board_artiq::drtio_routing; use board_artiq::drtio_routing;
use sched::Io; use sched::Io;
use sched::Mutex; use sched::Mutex;
#[cfg(has_rtio_crg)]
pub mod crg {
use board_misoc::{clock, csr};
pub fn check() -> bool {
unsafe { csr::rtio_crg::pll_locked_read() != 0 }
}
#[cfg(has_rtio_clock_switch)]
pub fn init(clk: u8) -> bool {
unsafe {
csr::rtio_crg::pll_reset_write(1);
csr::rtio_crg::clock_sel_write(clk);
csr::rtio_crg::pll_reset_write(0);
}
clock::spin_us(150);
return check()
}
#[cfg(not(has_rtio_clock_switch))]
pub fn init() -> bool {
unsafe {
csr::rtio_crg::pll_reset_write(0);
}
clock::spin_us(150);
return check()
}
}
#[cfg(not(has_rtio_crg))]
pub mod crg {
pub fn check() -> bool { true }
}
#[cfg(has_drtio)] #[cfg(has_drtio)]
pub mod drtio { pub mod drtio {
use super::*; use super::*;
@ -51,9 +15,6 @@ pub mod drtio {
pub fn startup(io: &Io, aux_mutex: &Mutex, pub fn startup(io: &Io, aux_mutex: &Mutex,
routing_table: &Urc<RefCell<drtio_routing::RoutingTable>>, routing_table: &Urc<RefCell<drtio_routing::RoutingTable>>,
up_destinations: &Urc<RefCell<[bool; drtio_routing::DEST_COUNT]>>) { up_destinations: &Urc<RefCell<[bool; drtio_routing::DEST_COUNT]>>) {
unsafe {
csr::drtio_transceiver::stable_clkin_write(1);
}
let aux_mutex = aux_mutex.clone(); let aux_mutex = aux_mutex.clone();
let routing_table = routing_table.clone(); let routing_table = routing_table.clone();
let up_destinations = up_destinations.clone(); let up_destinations = up_destinations.clone();
@ -380,52 +341,10 @@ fn async_error_thread(io: Io) {
pub fn startup(io: &Io, aux_mutex: &Mutex, pub fn startup(io: &Io, aux_mutex: &Mutex,
routing_table: &Urc<RefCell<drtio_routing::RoutingTable>>, routing_table: &Urc<RefCell<drtio_routing::RoutingTable>>,
up_destinations: &Urc<RefCell<[bool; drtio_routing::DEST_COUNT]>>) { up_destinations: &Urc<RefCell<[bool; drtio_routing::DEST_COUNT]>>) {
// The RTIO CRG may depend on the DRTIO transceiver clock.
// Initialize DRTIO first to bring up transceiver clocking.
drtio::startup(io, aux_mutex, routing_table, up_destinations); drtio::startup(io, aux_mutex, routing_table, up_destinations);
#[cfg(has_rtio_crg)]
{
#[cfg(has_rtio_clock_switch)]
{
#[derive(Debug)]
enum RtioClock {
Internal = 0,
External = 1
};
let clk = config::read("rtio_clock", |result| {
match result {
Ok(b"i") => {
info!("using internal RTIO clock");
RtioClock::Internal
},
Ok(b"e") => {
info!("using external RTIO clock");
RtioClock::External
},
_ => {
info!("using internal RTIO clock (by default)");
RtioClock::Internal
},
}
});
if !crg::init(clk as u8) {
error!("RTIO clock failed");
}
}
#[cfg(not(has_rtio_clock_switch))]
{
if !crg::init() {
error!("RTIO clock failed");
}
}
}
unsafe { unsafe {
csr::rtio_core::reset_phy_write(1); csr::rtio_core::reset_phy_write(1);
} }
io.spawn(4096, async_error_thread); io.spawn(4096, async_error_thread);
} }

View File

@ -7,7 +7,7 @@ use board_misoc::{ident, cache, config};
use {mailbox, rpc_queue, kernel}; use {mailbox, rpc_queue, kernel};
use urc::Urc; use urc::Urc;
use sched::{ThreadHandle, Io, Mutex, TcpListener, TcpStream, Error as SchedError}; use sched::{ThreadHandle, Io, Mutex, TcpListener, TcpStream, Error as SchedError};
use rtio_mgt; use rtio_clocking;
use rtio_dma::Manager as DmaManager; use rtio_dma::Manager as DmaManager;
use cache::Cache; use cache::Cache;
use kern_hwreq; use kern_hwreq;
@ -527,7 +527,7 @@ fn host_kernel_worker(io: &Io, aux_mutex: &Mutex,
return Err(Error::WatchdogExpired(idx)) return Err(Error::WatchdogExpired(idx))
} }
if !rtio_mgt::crg::check() { if !rtio_clocking::crg::check() {
host_write(stream, host::Reply::ClockFailure)?; host_write(stream, host::Reply::ClockFailure)?;
return Err(Error::ClockFailure) return Err(Error::ClockFailure)
} }
@ -571,7 +571,7 @@ fn flash_kernel_worker(io: &Io, aux_mutex: &Mutex,
return Err(Error::WatchdogExpired(idx)) return Err(Error::WatchdogExpired(idx))
} }
if !rtio_mgt::crg::check() { if !rtio_clocking::crg::check() {
return Err(Error::ClockFailure) return Err(Error::ClockFailure)
} }