forked from M-Labs/artiq
1
0
Fork 0

phaser: tweaks

This commit is contained in:
Robert Jördens 2020-09-22 15:27:38 +00:00
parent 5c76f5c319
commit 85d16e3e5f
3 changed files with 12 additions and 11 deletions

View File

@ -32,7 +32,7 @@ class DAC34H84:
revbus = 0
twos = 1
coarse_dac = 0xa # 20.6 mA, 0-15
coarse_dac = 9 # 18.75 mA, 0-15
sif_txenable = 0
mask_alarm_from_zerochk = 0

View File

@ -119,6 +119,7 @@ class Phaser:
:param core_device: Core device name (default: "core")
:param miso_delay: Fastlink MISO signal delay to account for cable
and buffer round trip. Tuning this might be automated later.
:param clk_sel: Select the external SMA clock input (1 or 0)
:param dac: DAC34H84 DAC settings as a dictionary.
:param trf0: Channel 0 TRF372017 quadrature upconverter settings as a
dictionary.
@ -134,8 +135,8 @@ class Phaser:
kernel_invariants = {"core", "channel_base", "t_frame", "miso_delay",
"dac_mmap"}
def __init__(self, dmgr, channel_base, miso_delay=1, core_device="core",
dac=None, trf0=None, trf1=None):
def __init__(self, dmgr, channel_base, miso_delay=1, clk_sel=0,
dac=None, trf0=None, trf1=None, core_device="core"):
self.channel_base = channel_base
self.core = dmgr.get(core_device)
# TODO: auto-align miso-delay in phy
@ -144,6 +145,7 @@ class Phaser:
# self.core.seconds_to_mu(10*8*4*ns) # unfortunately this returns 319
assert self.core.ref_period == 1*ns
self.t_frame = 10*8*4
self.clk_sel = clk_sel
self.dac_mmap = DAC34H84(dac).get_mmap()
@ -151,14 +153,13 @@ class Phaser:
for ch, trf in enumerate([trf0, trf1])]
@kernel
def init(self, clk_sel=0):
def init(self):
"""Initialize the board.
Verifies board and chip presence, resets components, performs
communication and configuration tests and establishes initial
conditions.
:param clk_sel: Select the external SMA clock input (1 or 0)
"""
board_id = self.read8(PHASER_ADDR_BOARD_ID)
if board_id != PHASER_BOARD_ID:
@ -167,7 +168,7 @@ class Phaser:
hw_rev = self.read8(PHASER_ADDR_HW_REV)
delay(.1*ms) # slack
has_upconverter = hw_rev & PHASER_HW_REV_VARIANT
is_baseband = hw_rev & PHASER_HW_REV_VARIANT
gw_rev = self.read8(PHASER_ADDR_GW_REV)
delay(.1*ms) # slack
@ -183,7 +184,7 @@ class Phaser:
self.set_leds(0x00)
self.set_fan_mu(0)
# bring everything out of reset, keep tx off
self.set_cfg(clk_sel=clk_sel, dac_txena=0)
self.set_cfg(clk_sel=self.clk_sel, dac_txena=0)
# TODO: crossing dac_clk (125 MHz) edges with sync_dly (0-7 ns)
# should change the optimal fifo_offset by 4
@ -269,7 +270,7 @@ class Phaser:
abs(data_i - data_q) > 2):
raise ValueError("DUC+oscillator phase/amplitude test failed")
if has_upconverter:
if not is_baseband:
for data in channel.trf_mmap:
channel.trf_write(data)
delay(.1*ms)
@ -279,7 +280,7 @@ class Phaser:
if not lock_detect:
raise ValueError("TRF quadrature upconverter lock failure")
self.set_cfg(clk_sel=clk_sel) # txena
self.set_cfg(clk_sel=self.clk_sel) # txena
@kernel
def write8(self, addr, data):

View File

@ -12,7 +12,7 @@ class TRF372017:
cal_clk_sel = 12 # /16, 4b
ndiv = 420 # 16b
pll_div_sel = 0b01 # /1, 2b
pll_div_sel = 0 # /1, 2b
prsc_sel = 1 # 8/9
vco_sel = 2 # 2b
vcosel_mode = 0
@ -106,7 +106,7 @@ class TRF372017:
(self.en_extvco << 17) | (self.en_isource << 18) |
(self.ld_ana_prec << 19) | (self.cp_tristate << 21) |
(self.speedup << 23) | (self.ld_dig_prec << 24) |
(self.en_dith << 25) | (self.mod_ord << 27) |
(self.en_dith << 25) | (self.mod_ord << 26) |
(self.dith_sel << 28) | (self.del_sd_clk << 29) |
(self.en_frac << 31))
mmap.append(