forked from M-Labs/artiq
miqro: document coredevice driver
This commit is contained in:
parent
5cfa8d9a42
commit
513f9f00f3
@ -1420,15 +1420,28 @@ class Miqro:
|
||||
|
||||
@kernel
|
||||
def reset(self):
|
||||
"""Establish no-output profiles and no-output window and execute them.
|
||||
|
||||
This establishes the first profile (index 0) on all oscillators as zero
|
||||
amplitude, creates a trivial window (one sample with zero amplitude,
|
||||
minimal interpolation), and executes a corresponding pulse.
|
||||
"""
|
||||
for osc in range(16):
|
||||
for pro in range(32):
|
||||
self.set_profile_mu(osc, pro, 0, 0, 0)
|
||||
delay(10*us)
|
||||
self.set_window_mu(start=0, iq=[0], rate=1, shift=0, order=0, head=0, tail=0)
|
||||
self.set_profile_mu(osc, profile=0, ftw=0, asf=0)
|
||||
delay(10*us)
|
||||
self.set_window_mu(start=0, iq=[0], order=0)
|
||||
self.pulse(window=0, profiles=[0])
|
||||
|
||||
@kernel
|
||||
def set_profile_mu(self, oscillator, profile, ftw, asf, pow=0):
|
||||
def set_profile_mu(self, oscillator, profile, ftw, asf, pow_=0):
|
||||
"""Store an oscillator profile (machine units).
|
||||
|
||||
:param oscillator: Oscillator index (0 to 15)
|
||||
:param profile: Profile index (0 to 31)
|
||||
:param ftw: Frequency tuning word (32 bit signed integer on a 250 MHz clock)
|
||||
:param asf: Amplitude scale factor (16 bit unsigned integer)
|
||||
:param pow_: Phase offset word (16 bit integer)
|
||||
"""
|
||||
if oscillator >= 16:
|
||||
raise ValueError("invalid oscillator index")
|
||||
if profile >= 32:
|
||||
@ -1438,21 +1451,51 @@ class Miqro:
|
||||
(oscillator << 6) | (profile << 1))
|
||||
self.channel.phaser.write32(PHASER_ADDR_MIQRO_MEM_DATA, ftw)
|
||||
self.channel.phaser.write32(PHASER_ADDR_MIQRO_MEM_DATA,
|
||||
(asf & 0xffff) | (pow << 16))
|
||||
(asf & 0xffff) | (pow_ << 16))
|
||||
|
||||
@kernel
|
||||
def set_profile(self, oscillator, profile, frequency, amplitude, phase=0.):
|
||||
# frequency is interpreted in the Nyquist sense, i.e. aliased
|
||||
"""Store an oscillator profile.
|
||||
|
||||
:param oscillator: Oscillator index (0 to 15)
|
||||
:param profile: Profile index (0 to 31)
|
||||
:param frequency: Frequency in Hz (passband -100 to 100 MHz).
|
||||
Interpreted in the Nyquist sense, i.e. aliased.
|
||||
:param amplitude: Amplitude in units of full scale (0. to 1.)
|
||||
:param phase: Phase in turns. See :class:`Miqro` for a definition of
|
||||
phase in this context.
|
||||
:return: The quantized 32 bit frequency tuning word
|
||||
"""
|
||||
ftw = int32(round(frequency*((1 << 30)/(62.5*MHz))))
|
||||
asf = int32(round(amplitude*0xffff))
|
||||
if asf < 0 or asf > 0xffff:
|
||||
raise ValueError("amplitude out of bounds")
|
||||
pow = int32(round(phase*(1 << 16)))
|
||||
self.set_profile_mu(oscillator, profile, ftw, asf, pow)
|
||||
pow_ = int32(round(phase*(1 << 16)))
|
||||
self.set_profile_mu(oscillator, profile, ftw, asf, pow_)
|
||||
return ftw
|
||||
|
||||
@kernel
|
||||
def set_window_mu(self, start, iq, rate=1, shift=0, order=3, head=1, tail=1):
|
||||
"""Store a window segment (machine units)
|
||||
|
||||
:param start: Window start address (0 to 0x3ff)
|
||||
:param iq: List of IQ window samples. Each window sample is an integer
|
||||
containing the signed I part in the 16 LSB and the signed Q part in
|
||||
the 16 MSB. The maximum window length is 0x3fe. The user must
|
||||
ensure that this window does not overlap with other windows in the
|
||||
memory.
|
||||
:param rate: Interpolation rate change (1 to 1 << 12)
|
||||
:param shift: Interpolator amplitude gain compensation in powers of 2 (0 to 63)
|
||||
:param order: Interpolation order from 0 (corresponding to
|
||||
constant/zero-order-hold/1st order CIC interpolation) to 3 (corresponding
|
||||
to cubic/Parzen/4th order CIC interpolation)
|
||||
:param head: Update the interpolator settings and clear its state at the start
|
||||
of the window. This also implies starting the envelope from zero.
|
||||
:param tail: Feed zeros into the interpolator after the window samples.
|
||||
In the absence of further pulses this will return the output envelope
|
||||
to zero with the chosen interpolation.
|
||||
:return: Next available window memory address after this segment.
|
||||
"""
|
||||
if start >= 1 << 10:
|
||||
raise ValueError("start out of bounds")
|
||||
if len(iq) >= 1 << 10:
|
||||
@ -1480,6 +1523,24 @@ class Miqro:
|
||||
|
||||
@kernel
|
||||
def set_window(self, start, iq, period=4*ns, order=3, head=1, tail=1):
|
||||
"""Store a window segment
|
||||
|
||||
:param start: Window start address (0 to 0x3ff)
|
||||
:param iq: List of IQ window samples. Each window sample is a pair of
|
||||
two float numbers -1 to 1, one for each I and Q in units of full scale.
|
||||
The maximum window length is 0x3fe. The user must ensure that this window
|
||||
does not overlap with other windows in the memory.
|
||||
:param period: Desired window sample period in SI units (4*ns to (4 << 12)*ns).
|
||||
:param order: Interpolation order from 0 (corresponding to
|
||||
constant/zero-order-hold/1st order CIC interpolation) to 3 (corresponding
|
||||
to cubic/Parzen/4th order CIC interpolation)
|
||||
:param head: Update the interpolator settings and clear its state at the start
|
||||
of the window. This also implies starting the envelope from zero.
|
||||
:param tail: Feed zeros into the interpolator after the window samples.
|
||||
In the absence of further pulses this will return the output envelope
|
||||
to zero with the chosen interpolation.
|
||||
:return: Actual sample period in SI units
|
||||
"""
|
||||
rate = int32(round(period/(4*ns)))
|
||||
gain = 1.
|
||||
for _ in range(order):
|
||||
@ -1499,6 +1560,17 @@ class Miqro:
|
||||
|
||||
@kernel
|
||||
def encode(self, window, profiles, data):
|
||||
"""Encode window and profile selection
|
||||
|
||||
:param window: Window start address (0 to 0x3ff)
|
||||
:param profiles: List of profile indices for the oscillators. Maximum
|
||||
length 16. Unused oscillators will be set to profile 0.
|
||||
:param data: List of integers to store the encoded data words into.
|
||||
Unused entries will remain untouched. Must contain at least three
|
||||
lements if all oscillators are used and should be initialized to
|
||||
zeros.
|
||||
:return: Number of words from `data` used.
|
||||
"""
|
||||
if len(profiles) > 16:
|
||||
raise ValueError("too many oscillators")
|
||||
if window > 0x3ff:
|
||||
@ -1518,6 +1590,13 @@ class Miqro:
|
||||
|
||||
@kernel
|
||||
def pulse_mu(self, data):
|
||||
"""Emit a pulse (encoded)
|
||||
|
||||
The pulse fiducial timing resolution is 4 ns.
|
||||
|
||||
:param data: List of up to 3 words containing an encoded MIQRO pulse as
|
||||
returned by :meth:`encode`.
|
||||
"""
|
||||
word = len(data)
|
||||
delay_mu(-8*word) # back shift to align
|
||||
while word > 0:
|
||||
@ -1528,6 +1607,15 @@ class Miqro:
|
||||
|
||||
@kernel
|
||||
def pulse(self, window, profiles):
|
||||
"""Emit a pulse
|
||||
|
||||
This encodes the window and profiles (see :meth:`encode`) and emits them
|
||||
(see :meth:`pulse_mu`).
|
||||
|
||||
:param window: Window start address (0 to 0x3ff)
|
||||
:param profiles: List of profile indices for the oscillators. Maximum
|
||||
length 16. Unused oscillators will select profile 0.
|
||||
"""
|
||||
data = [0, 0, 0]
|
||||
words = self.encode(window, profiles, data)
|
||||
self.pulse_mu(data[:words])
|
||||
|
||||
Loading…
Reference in New Issue
Block a user