srenblad
/
artiq
forked from M-Labs/artiq
1
0
Fork 0
Code Pull Requests Activity

Docs: instructions to check if in plugdev group

This commit is contained in:
Drew 2018-11-27 18:51:01 -05:00 committed by Sebastien Bourdeauducq
parent a53065ffc8
commit 3312a033eb
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
doc/manual/installing.rst
View File

@ -117,7 +117,7 @@ Configuring OpenOCD
Some additional steps are necessary to ensure that OpenOCD can communicate with the FPGA board.
On Linux, first ensure that the current user belongs to the ``plugdev`` group. If it does not, run ``sudo adduser $USER plugdev`` and relogin. If you installed OpenOCD using conda and are using the conda environment ``artiq-main``, then execute the statements below. If you are using a different environment, you will have to replace ``artiq-main`` with the name of your environment::
On Linux, first ensure that the current user belongs to the ``plugdev`` group (i.e. `plugdev` shown when you run `$ groups`). If it does not, run ``sudo adduser $USER plugdev`` and relogin. If you installed OpenOCD using conda and are using the conda environment ``artiq-main``, then execute the statements below. If you are using a different environment, you will have to replace ``artiq-main`` with the name of your environment::
$ sudo cp ~/.conda/envs/artiq-main/share/openocd/contrib/60-openocd.rules /etc/udev/rules.d
$ sudo udevadm trigger