1
0
Fork 0

Firmware: Add drtio_eem.rs support

- Port from Artiq repo
- Initialize the drtio_eem on main, rtio_clocking
- Driver for eem_transceiver
This commit is contained in:
linuswck 2023-10-10 10:47:24 +08:00
parent b15322b6ba
commit a4d1be00c0
6 changed files with 245 additions and 0 deletions

1
src/Cargo.lock generated
View File

@ -271,6 +271,7 @@ dependencies = [
"libconfig", "libconfig",
"libcortex_a9", "libcortex_a9",
"libregister", "libregister",
"libsupport_zynq",
"log", "log",
"log_buffer", "log_buffer",
"nb 1.0.0", "nb 1.0.0",

View File

@ -25,6 +25,7 @@ void = { version = "1", default-features = false }
io = { path = "../libio", features = ["byteorder"] } io = { path = "../libio", features = ["byteorder"] }
libboard_zynq = { path = "@@ZYNQ_RS@@/libboard_zynq" } libboard_zynq = { path = "@@ZYNQ_RS@@/libboard_zynq" }
libsupport_zynq = { path = "@@ZYNQ_RS@@/libsupport_zynq", default-features = false, features = ["alloc_core"] }
libregister = { path = "@@ZYNQ_RS@@/libregister" } libregister = { path = "@@ZYNQ_RS@@/libregister" }
libconfig = { path = "@@ZYNQ_RS@@/libconfig", features = ["fat_lfn"] } libconfig = { path = "@@ZYNQ_RS@@/libconfig", features = ["fat_lfn"] }
libcortex_a9 = { path = "@@ZYNQ_RS@@/libcortex_a9" } libcortex_a9 = { path = "@@ZYNQ_RS@@/libcortex_a9" }

View File

@ -0,0 +1,233 @@
use crate::pl;
use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
use libboard_zynq::timer::GlobalTimer;
use libconfig::Config;
use libsupport_zynq::alloc::format;
use log::{debug, error, info};
struct SerdesConfig {
pub delay: [u8; 4],
}
impl SerdesConfig {
pub fn as_bytes(&self) -> &[u8] {
unsafe {
core::slice::from_raw_parts(
(self as *const SerdesConfig) as *const u8,
core::mem::size_of::<SerdesConfig>(),
)
}
}
}
fn select_lane(lane_no: u8) {
unsafe {
pl::csr::eem_transceiver::lane_sel_write(lane_no);
}
}
fn apply_delay(tap: u8, timer: &mut GlobalTimer) {
unsafe {
pl::csr::eem_transceiver::dly_cnt_in_write(tap);
pl::csr::eem_transceiver::dly_ld_write(1);
timer.delay_us(1);
assert!(tap as u8 == pl::csr::eem_transceiver::dly_cnt_out_read());
}
}
fn apply_config(config: &SerdesConfig, timer: &mut GlobalTimer) {
for lane_no in 0..4 {
select_lane(lane_no as u8);
apply_delay(config.delay[lane_no], timer);
}
}
unsafe fn assign_delay(timer: &mut GlobalTimer) -> SerdesConfig {
// Select an appropriate delay for lane 0
select_lane(0);
//
let mut best_dly = None;
loop {
let mut prev = None;
for curr_dly in 0..32 {
//let read_align = read_align_fn(curr_dly, timer);
let curr_low_rate = read_align(curr_dly, timer);
if let Some(prev_low_rate) = prev {
// This is potentially a crossover position
if prev_low_rate <= curr_low_rate && curr_low_rate >= 0.5 {
let prev_dev = 0.5 - prev_low_rate;
let curr_dev = curr_low_rate - 0.5;
let selected_idx = if prev_dev < curr_dev {
curr_dly - 1
} else {
curr_dly
};
// The setup setup/hold calibration timing (even with
// tolerance) might be invalid in other lanes due to skew.
// 5 taps is very conservative, generally it is 1 or 2
if selected_idx < 5 {
prev = None;
continue;
} else {
best_dly = Some(selected_idx);
break;
}
}
}
// Only rising slope from <= 0.5 can result in a rising low rate
// crossover at 50%.
if curr_low_rate <= 0.5 {
prev = Some(curr_low_rate);
}
}
if best_dly.is_none() {
error!("setup/hold timing calibration failed, retry in 1s...");
timer.delay_us(1_000_000);
} else {
break;
}
}
let best_dly = best_dly.unwrap();
apply_delay(best_dly, timer);
let mut delay_list = [best_dly; 4];
// Assign delay for other lanes
for lane_no in 1..=3 {
select_lane(lane_no as u8);
let mut min_deviation = 0.5;
let mut min_idx = 0;
for dly_delta in -3..=3 {
let index = (best_dly as isize + dly_delta) as u8;
let low_rate = read_align(index, timer);
// abs() from f32 is not available in core library
let deviation = if low_rate < 0.5 {
0.5 - low_rate
} else {
low_rate - 0.5
};
if deviation < min_deviation {
min_deviation = deviation;
min_idx = index;
}
}
apply_delay(min_idx, timer);
delay_list[lane_no] = min_idx;
}
debug!("setup/hold timing calibration: {:?}", delay_list);
SerdesConfig {
delay: delay_list,
}
}
fn read_align(dly: u8, timer: &mut GlobalTimer) -> f32 {
unsafe {
apply_delay(dly, timer);
pl::csr::eem_transceiver::counter_reset_write(1);
pl::csr::eem_transceiver::counter_enable_write(1);
timer.delay_us(2000);
pl::csr::eem_transceiver::counter_enable_write(0);
let (high, low) = (
pl::csr::eem_transceiver::counter_high_count_read(),
pl::csr::eem_transceiver::counter_low_count_read(),
);
if pl::csr::eem_transceiver::counter_overflow_read() == 1 {
panic!("Unexpected phase detector counter overflow");
}
low as f32 / (low + high) as f32
}
}
unsafe fn align_comma(timer: &mut GlobalTimer) {
loop {
for slip in 1..=10 {
// The soft transceiver has 2 8b10b decoders, which receives lane
// 0/1 and lane 2/3 respectively. The decoder are time-multiplexed
// to decode exactly 1 lane each sysclk cycle.
//
// The decoder decodes lane 0/2 data on odd sysclk cycles, buffer
// on even cycles, and vice versa for lane 1/3. Data/Clock latency
// could change timing. The extend bit flips the decoding timing,
// so lane 0/2 data are decoded on even cycles, and lane 1/3 data
// are decoded on odd cycles.
//
// This is needed because transmitting/receiving a 8b10b character
// takes 2 sysclk cycles. Adjusting bitslip only via ISERDES
// limits the range to 1 cycle. The wordslip bit extends the range
// to 2 sysclk cycles.
pl::csr::eem_transceiver::wordslip_write((slip > 5) as u8);
// Apply a double bitslip since the ISERDES is 2x oversampled.
// Bitslip is used for comma alignment purposes once setup/hold
// timing is met.
pl::csr::eem_transceiver::bitslip_write(1);
pl::csr::eem_transceiver::bitslip_write(1);
timer.delay_us(1);
pl::csr::eem_transceiver::comma_align_reset_write(1);
timer.delay_us(100);
if pl::csr::eem_transceiver::comma_read() == 1 {
debug!("comma alignment completed after {} bitslips", slip);
return;
}
}
error!("comma alignment failed, retrying in 1s...");
timer.delay_us(1_000_000);
}
}
pub fn init(timer: &mut GlobalTimer, cfg: &Config) {
for trx_no in 0..pl::csr::CONFIG_EEM_DRTIO_COUNT {
unsafe {
pl::csr::eem_transceiver::transceiver_sel_write(trx_no as u8);
}
let key = format!("eem_drtio_delay{}", trx_no);
let cfg_read = cfg.read(&key);
match cfg_read {
Ok(record) => {
info!("loading calibrated timing values from sd card");
unsafe {
apply_config(&*(record.as_ptr() as *const SerdesConfig), timer);
}
}
Err(_) => {
info!("calibrating...");
let config = unsafe { assign_delay(timer) };
match cfg.write(&key, config.as_bytes().to_vec()) {
Ok(()) => {
info!("storing calibration timing values into sd card");
}
Err(e) => {
error!("calibration successful but calibration timing values cannot be stored into sd card. Error:{}", e);
}
};
}
}
unsafe {
align_comma(timer);
pl::csr::eem_transceiver::rx_ready_write(1);
}
}
}

View File

@ -31,6 +31,8 @@ pub mod mem;
pub mod pl; pub mod pl;
#[cfg(has_si5324)] #[cfg(has_si5324)]
pub mod si5324; pub mod si5324;
#[cfg(has_drtio_eem)]
pub mod drtio_eem;
use core::{cmp, str}; use core::{cmp, str};

View File

@ -16,6 +16,8 @@ use libasync::task;
#[cfg(feature = "target_kasli_soc")] #[cfg(feature = "target_kasli_soc")]
use libboard_artiq::io_expander; use libboard_artiq::io_expander;
use libboard_artiq::{identifier_read, logger, pl}; use libboard_artiq::{identifier_read, logger, pl};
#[cfg(has_drtio_eem)]
use libboard_artiq::drtio_eem;
use libboard_zynq::{gic, mpcore, timer::GlobalTimer}; use libboard_zynq::{gic, mpcore, timer::GlobalTimer};
use libconfig::Config; use libconfig::Config;
use libcortex_a9::l2c::enable_l2_cache; use libcortex_a9::l2c::enable_l2_cache;
@ -109,6 +111,9 @@ pub fn main_core0() {
rtio_clocking::init(&mut timer, &cfg); rtio_clocking::init(&mut timer, &cfg);
#[cfg(has_drtio_eem)]
drtio_eem::init(&mut timer, &cfg);
task::spawn(ksupport::report_async_rtio_errors()); task::spawn(ksupport::report_async_rtio_errors());
#[cfg(feature = "target_kasli_soc")] #[cfg(feature = "target_kasli_soc")]

View File

@ -104,6 +104,9 @@ fn init_drtio(timer: &mut GlobalTimer) {
unsafe { unsafe {
pl::csr::rtio_core::reset_phy_write(1); pl::csr::rtio_core::reset_phy_write(1);
pl::csr::gt_drtio::txenable_write(0xffffffffu32 as _); pl::csr::gt_drtio::txenable_write(0xffffffffu32 as _);
#[cfg(has_drtio_eem)]
pl::csr::eem_transceiver::txenable_write(0xffffffffu32 as _);
} }
} }