1
0
Fork 0

kasli-soc: preliminary si5324 support

This commit is contained in:
Sebastien Bourdeauducq 2021-05-29 16:15:27 +08:00
parent ce9d38827b
commit 0ae2138034
3 changed files with 333 additions and 89 deletions

View File

@ -1,9 +1,7 @@
#[cfg(feature = "target_zc706")]
mod i2c {
use libboard_zynq;
use crate::artiq_raise;
static mut I2C_BUS: Option<libboard_zynq::i2c::I2c> = None;
pub static mut I2C_BUS: Option<libboard_zynq::i2c::I2c> = None;
pub extern fn start(busno: i32) {
if busno > 0 {
@ -67,34 +65,3 @@ mod i2c {
i2c.init().expect("I2C bus initialization failed");
unsafe { I2C_BUS = Some(i2c) };
}
}
#[cfg(not(feature = "target_zc706"))]
mod i2c {
use crate::artiq_raise;
pub extern fn start(_busno: i32) {
artiq_raise!("I2CError", "No I2C bus");
}
pub extern fn restart(_busno: i32) {
artiq_raise!("I2CError", "No I2C bus");
}
pub extern fn stop(_busno: i32) {
artiq_raise!("I2CError", "No I2C bus");
}
pub extern fn write(_busno: i32, _data: i32) -> bool {
artiq_raise!("I2CError", "No I2C bus");
}
pub extern fn read(_busno: i32, _ack: bool) -> i32 {
artiq_raise!("I2CError", "No I2C bus");
}
pub fn init() {
}
}
pub use i2c::*;

View File

@ -45,6 +45,8 @@ mod mgmt;
mod analyzer;
mod irq;
mod i2c;
#[cfg(feature = "target_kasli_soc")]
mod si5324;
fn init_gateware() {
// Set up PS->PL clocks
@ -160,6 +162,20 @@ async fn report_async_rtio_errors() {
}
}
#[cfg(feature = "target_kasli_soc")]
// 125MHz output, from crystal, 7 Hz
const SI5324_SETTINGS: si5324::FrequencySettings
= si5324::FrequencySettings {
n1_hs : 10,
nc1_ls : 4,
n2_hs : 10,
n2_ls : 19972,
n31 : 4565,
n32 : 4565,
bwsel : 4,
crystal_ref: true
};
static mut LOG_BUFFER: [u8; 1<<17] = [0; 1<<17];
#[no_mangle]
@ -183,6 +199,9 @@ pub fn main_core0() {
info!("detected gateware: {}", identifier_read(&mut [0; 64]));
i2c::init();
#[cfg(feature = "target_kasli_soc")]
si5324::setup(unsafe { (&mut i2c::I2C_BUS).as_mut().unwrap() },
&SI5324_SETTINGS, si5324::Input::Ckin1).expect("cannot initialize Si5324");
let cfg = match Config::new() {
Ok(cfg) => cfg,

258
src/runtime/src/si5324.rs Normal file
View File

@ -0,0 +1,258 @@
use core::result;
use log::info;
use libboard_zynq::i2c::I2c;
type Result<T> = result::Result<T, &'static str>;
const ADDRESS: u8 = 0x68;
// NOTE: the logical parameters DO NOT MAP to physical values written
// into registers. They have to be mapped; see the datasheet.
// DSPLLsim reports the logical parameters in the design summary, not
// the physical register values.
pub struct FrequencySettings {
pub n1_hs: u8,
pub nc1_ls: u32,
pub n2_hs: u8,
pub n2_ls: u32,
pub n31: u32,
pub n32: u32,
pub bwsel: u8,
pub crystal_ref: bool
}
pub enum Input {
Ckin1,
Ckin2,
}
fn map_frequency_settings(settings: &FrequencySettings) -> Result<FrequencySettings> {
if settings.nc1_ls != 0 && (settings.nc1_ls % 2) == 1 {
return Err("NC1_LS must be 0 or even")
}
if settings.nc1_ls > (1 << 20) {
return Err("NC1_LS is too high")
}
if (settings.n2_ls % 2) == 1 {
return Err("N2_LS must be even")
}
if settings.n2_ls > (1 << 20) {
return Err("N2_LS is too high")
}
if settings.n31 > (1 << 19) {
return Err("N31 is too high")
}
if settings.n32 > (1 << 19) {
return Err("N32 is too high")
}
let r = FrequencySettings {
n1_hs: match settings.n1_hs {
4 => 0b000,
5 => 0b001,
6 => 0b010,
7 => 0b011,
8 => 0b100,
9 => 0b101,
10 => 0b110,
11 => 0b111,
_ => return Err("N1_HS has an invalid value")
},
nc1_ls: settings.nc1_ls - 1,
n2_hs: match settings.n2_hs {
4 => 0b000,
5 => 0b001,
6 => 0b010,
7 => 0b011,
8 => 0b100,
9 => 0b101,
10 => 0b110,
11 => 0b111,
_ => return Err("N2_HS has an invalid value")
},
n2_ls: settings.n2_ls - 1,
n31: settings.n31 - 1,
n32: settings.n32 - 1,
bwsel: settings.bwsel,
crystal_ref: settings.crystal_ref
};
Ok(r)
}
fn write(i2c: &mut I2c, reg: u8, val: u8) -> Result<()> {
i2c.start().unwrap();
if !i2c.write(ADDRESS << 1).unwrap() {
return Err("Si5324 failed to ack write address")
}
if !i2c.write(reg).unwrap() {
return Err("Si5324 failed to ack register")
}
if !i2c.write(val).unwrap() {
return Err("Si5324 failed to ack value")
}
i2c.stop().unwrap();
Ok(())
}
fn write_no_ack_value(i2c: &mut I2c, reg: u8, val: u8) -> Result<()> {
i2c.start().unwrap();
if !i2c.write(ADDRESS << 1).unwrap() {
return Err("Si5324 failed to ack write address")
}
if !i2c.write(reg).unwrap() {
return Err("Si5324 failed to ack register")
}
i2c.write(val).unwrap();
i2c.stop().unwrap();
Ok(())
}
fn read(i2c: &mut I2c, reg: u8) -> Result<u8> {
i2c.start().unwrap();
if !i2c.write(ADDRESS << 1).unwrap() {
return Err("Si5324 failed to ack write address")
}
if !i2c.write(reg).unwrap() {
return Err("Si5324 failed to ack register")
}
i2c.restart().unwrap();
if !i2c.write((ADDRESS << 1) | 1).unwrap() {
return Err("Si5324 failed to ack read address")
}
let val = i2c.read(false).unwrap();
i2c.stop().unwrap();
Ok(val)
}
fn rmw<F>(i2c: &mut I2c, reg: u8, f: F) -> Result<()> where
F: Fn(u8) -> u8 {
let value = read(i2c, reg)?;
write(i2c, reg, f(value))?;
Ok(())
}
fn ident(i2c: &mut I2c) -> Result<u16> {
Ok(((read(i2c, 134)? as u16) << 8) | (read(i2c, 135)? as u16))
}
fn soft_reset(i2c: &mut I2c) -> Result<()> {
//TODO write_no_ack_value(i2c, 136, read(136)? | 0x80)?;
//TODO clock::spin_us(10_000);
Ok(())
}
fn has_xtal(i2c: &mut I2c) -> Result<bool> {
Ok((read(i2c, 129)? & 0x01) == 0) // LOSX_INT=0
}
fn has_ckin(i2c: &mut I2c, input: Input) -> Result<bool> {
match input {
Input::Ckin1 => Ok((read(i2c, 129)? & 0x02) == 0), // LOS1_INT=0
Input::Ckin2 => Ok((read(i2c, 129)? & 0x04) == 0), // LOS2_INT=0
}
}
fn locked(i2c: &mut I2c) -> Result<bool> {
Ok((read(i2c, 130)? & 0x01) == 0) // LOL_INT=0
}
fn monitor_lock(i2c: &mut I2c) -> Result<()> {
info!("waiting for Si5324 lock...");
// TODO let t = clock::get_ms();
while !locked(i2c)? {
// Yes, lock can be really slow.
/*if clock::get_ms() > t + 20000 {
return Err("Si5324 lock timeout");
}*/
}
info!(" ...locked");
Ok(())
}
fn init(i2c: &mut I2c) -> Result<()> {
info!("init test");
#[cfg(feature = "target_kasli_soc")]
{
i2c.pca9548_select(0x70, 0)?;
i2c.pca9548_select(0x71, 1 << 3)?;
}
if ident(i2c)? != 0x0182 {
return Err("Si5324 does not have expected product number");
}
soft_reset(i2c)?;
Ok(())
}
pub fn bypass(i2c: &mut I2c, input: Input) -> Result<()> {
let cksel_reg = match input {
Input::Ckin1 => 0b00,
Input::Ckin2 => 0b01,
};
init(i2c)?;
rmw(i2c, 21, |v| v & 0xfe)?; // CKSEL_PIN=0
rmw(i2c, 3, |v| (v & 0x3f) | (cksel_reg << 6))?; // CKSEL_REG
rmw(i2c, 4, |v| (v & 0x3f) | (0b00 << 6))?; // AUTOSEL_REG=b00
rmw(i2c, 6, |v| (v & 0xc0) | 0b111111)?; // SFOUT2_REG=b111 SFOUT1_REG=b111
rmw(i2c, 0, |v| (v & 0xfd) | 0x02)?; // BYPASS_REG=1
Ok(())
}
pub fn setup(i2c: &mut I2c, settings: &FrequencySettings, input: Input) -> Result<()> {
let s = map_frequency_settings(settings)?;
let cksel_reg = match input {
Input::Ckin1 => 0b00,
Input::Ckin2 => 0b01,
};
init(i2c)?;
if settings.crystal_ref {
rmw(i2c, 0, |v| v | 0x40)?; // FREE_RUN=1
}
rmw(i2c, 2, |v| (v & 0x0f) | (s.bwsel << 4))?;
rmw(i2c, 21, |v| v & 0xfe)?; // CKSEL_PIN=0
rmw(i2c, 3, |v| (v & 0x2f) | (cksel_reg << 6) | 0x10)?; // CKSEL_REG, SQ_ICAL=1
rmw(i2c, 4, |v| (v & 0x3f) | (0b00 << 6))?; // AUTOSEL_REG=b00
rmw(i2c, 6, |v| (v & 0xc0) | 0b111111)?; // SFOUT2_REG=b111 SFOUT1_REG=b111
write(i2c, 25, (s.n1_hs << 5 ) as u8)?;
write(i2c, 31, (s.nc1_ls >> 16) as u8)?;
write(i2c, 32, (s.nc1_ls >> 8 ) as u8)?;
write(i2c, 33, (s.nc1_ls) as u8)?;
write(i2c, 34, (s.nc1_ls >> 16) as u8)?; // write to NC2_LS as well
write(i2c, 35, (s.nc1_ls >> 8 ) as u8)?;
write(i2c, 36, (s.nc1_ls) as u8)?;
write(i2c, 40, (s.n2_hs << 5 ) as u8 | (s.n2_ls >> 16) as u8)?;
write(i2c, 41, (s.n2_ls >> 8 ) as u8)?;
write(i2c, 42, (s.n2_ls) as u8)?;
write(i2c, 43, (s.n31 >> 16) as u8)?;
write(i2c, 44, (s.n31 >> 8) as u8)?;
write(i2c, 45, (s.n31) as u8)?;
write(i2c, 46, (s.n32 >> 16) as u8)?;
write(i2c, 47, (s.n32 >> 8) as u8)?;
write(i2c, 48, (s.n32) as u8)?;
rmw(i2c, 137, |v| v | 0x01)?; // FASTLOCK=1
rmw(i2c, 136, |v| v | 0x40)?; // ICAL=1
if !has_xtal(i2c)? {
return Err("Si5324 misses XA/XB signal");
}
if !has_ckin(i2c, input)? {
return Err("Si5324 misses clock input signal");
}
monitor_lock(i2c)?;
Ok(())
}
pub fn select_input(i2c: &mut I2c, input: Input) -> Result<()> {
let cksel_reg = match input {
Input::Ckin1 => 0b00,
Input::Ckin2 => 0b01,
};
rmw(i2c, 3, |v| (v & 0x3f) | (cksel_reg << 6))?;
if !has_ckin(i2c, input)? {
return Err("Si5324 misses clock input signal");
}
monitor_lock(i2c)?;
Ok(())
}