use core::fmt; use libregister::*; use super::slcr; use super::clocks::CpuClocks; mod regs; mod baud_rate_gen; pub struct Uart { regs: &'static mut regs::RegisterBlock, } impl Uart { #[cfg(feature = "target_zc706")] pub fn serial(baudrate: u32) -> Self { slcr::RegisterBlock::unlocked(|slcr| { // Route UART 1 RxD/TxD Signals to MIO Pins // TX pin slcr.mio_pin_48.write( slcr::MioPin48::zeroed() .l3_sel(0b111) .io_type(slcr::IoBufferType::Lvcmos18) .pullup(true) ); // RX pin slcr.mio_pin_49.write( slcr::MioPin49::zeroed() .tri_enable(true) .l3_sel(0b111) .io_type(slcr::IoBufferType::Lvcmos18) .pullup(true) ); }); Self::uart1(baudrate) } #[cfg(feature = "target_cora_z7_10")] pub fn serial(baudrate: u32) -> Self { slcr::RegisterBlock::unlocked(|slcr| { // Route UART 0 RxD/TxD Signals to MIO Pins // TX pin slcr.mio_pin_15.write( slcr::MioPin15::zeroed() .l3_sel(0b111) .io_type(slcr::IoBufferType::Lvcmos33) .pullup(true) ); // RX pin slcr.mio_pin_14.write( slcr::MioPin14::zeroed() .tri_enable(true) .l3_sel(0b111) .io_type(slcr::IoBufferType::Lvcmos33) .pullup(true) ); }); Self::uart0(baudrate) } pub fn uart0(baudrate: u32) -> Self { slcr::RegisterBlock::unlocked(|slcr| { slcr.uart_rst_ctrl.reset_uart0(); slcr.aper_clk_ctrl.enable_uart0(); slcr.uart_clk_ctrl.enable_uart0(); }); let mut self_ = Uart { regs: regs::RegisterBlock::uart0(), }; self_.configure(baudrate); self_ } pub fn uart1(baudrate: u32) -> Self { slcr::RegisterBlock::unlocked(|slcr| { slcr.uart_rst_ctrl.reset_uart1(); slcr.aper_clk_ctrl.enable_uart1(); slcr.uart_clk_ctrl.enable_uart1(); }); let mut self_ = Uart { regs: regs::RegisterBlock::uart1(), }; self_.configure(baudrate); self_ } pub fn write_byte(&mut self, value: u8) { while self.tx_fifo_full() {} self.regs.tx_rx_fifo.write( regs::TxRxFifo::zeroed() .data(value.into()) ); } pub fn configure(&mut self, baudrate: u32) { // Configure UART character frame // * Disable clock-divider // * 8-bit // * 1 stop bit // * Normal channel mode // * No parity self.regs.mode.write( regs::Mode::zeroed() .par(regs::ParityMode::None) .chmode(regs::ChannelMode::Normal) ); // Configure the Baud Rate self.disable_rx(); self.disable_tx(); let clocks = CpuClocks::get(); baud_rate_gen::configure(self.regs, clocks.uart_ref_clk(), baudrate); // Enable controller self.reset_rx(); self.reset_tx(); self.wait_reset(); self.enable_rx(); self.enable_tx(); self.set_rx_timeout(false); self.set_break(false, true); } fn disable_rx(&mut self) { self.regs.control.modify(|_, w| { w.rxen(false) .rxdis(true) }) } fn disable_tx(&mut self) { self.regs.control.modify(|_, w| { w.txen(false) .txdis(true) }) } fn enable_rx(&mut self) { self.regs.control.modify(|_, w| { w.rxen(true) .rxdis(false) }) } fn enable_tx(&mut self) { self.regs.control.modify(|_, w| { w.txen(true) .txdis(false) }) } fn reset_rx(&mut self) { self.regs.control.modify(|_, w| { w.rxrst(true) }) } fn reset_tx(&mut self) { self.regs.control.modify(|_, w| { w.txrst(true) }) } /// Wait for `reset_rx()` or `reset_tx()` to complete fn wait_reset(&self) { let mut pending = true; while pending { let control = self.regs.control.read(); pending = control.rxrst() || control.txrst(); } } fn set_break(&mut self, startbrk: bool, stopbrk: bool) { self.regs.control.modify(|_, w| { w.sttbrk(startbrk) .stpbrk(stopbrk) }) } // 0 disables fn set_rx_timeout(&mut self, enable: bool) { self.regs.control.modify(|_, w| { w.rstto(enable) }) } pub fn tx_fifo_full(&self) -> bool { self.regs.channel_sts.read().txfull() } pub fn tx_fifo_empty(&self) -> bool { self.regs.channel_sts.read().txempty() } } impl fmt::Write for Uart { fn write_str(&mut self, s: &str) -> Result<(), fmt::Error> { while !self.tx_fifo_empty() {} for b in s.bytes() { self.write_byte(b); } Ok(()) } }